summaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2010-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (229 commits) USB: remove unused usb_buffer_alloc and usb_buffer_free macros usb: musb: update gfp/slab.h includes USB: ftdi_sio: fix legacy SIO-device header USB: kl5usb105: reimplement using generic framework USB: kl5usb105: minor clean ups USB: kl5usb105: fix memory leak USB: io_ti: use kfifo to implement write buffering USB: io_ti: remove unsused private counter USB: ti_usb: use kfifo to implement write buffering USB: ir-usb: fix incorrect write-buffer length USB: aircable: fix incorrect write-buffer length USB: safe_serial: straighten out read processing USB: safe_serial: reimplement read using generic framework USB: safe_serial: reimplement write using generic framework usb-storage: always print quirks USB: usb-storage: trivial debug improvements USB: oti6858: use port write fifo USB: oti6858: use kfifo to implement write buffering USB: cypress_m8: use kfifo to implement write buffering USB: cypress_m8: remove unused drain define ... Fix up conflicts (due to usb_buffer_alloc/free renaming) in drivers/input/tablet/acecad.c drivers/input/tablet/kbtab.c drivers/input/tablet/wacom_sys.c drivers/media/video/gspca/gspca.c sound/usb/usbaudio.c
2010-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20USB: rename usb_buffer_alloc() and usb_buffer_free() usersDaniel Mack
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. All call sites have been changed accordingly, except for staging drivers. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (534 commits) V4L/DVB (13554a): v4l: Use the video_drvdata function in drivers V4L/DVB: vivi and mem2mem_testdev need slab.h to build V4L/DVB: tm6000: bugfix image position V4L/DVB: IR/imon: remove dead IMON_KEY_RELEASE_OFFSET V4L/DVB: tm6000: README - add vbi V4L/DVB: Fix unlock logic at medusa_video_init V4L/DVB: fix dvb frontend lockup V4L/DVB: s2255drv: remove dead code V4L/DVB: s2255drv: return if vdev not found V4L/DVB: ov511: cleanup: remove unneeded null check V4L/DVB: media/mem2mem: dereferencing free memory V4L/DVB: media/IR: Add missing include file to rc-map.c V4L/DVB: dvb/stv6110x: cleanup error handling V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to Kconfig V4L/DVB: ngene: start separating out DVB functions into separate file V4L/DVB: ngene: split out card specific code into a separate file V4L/DVB: ngene: split out i2c code into a separate file V4L/DVB: ngene: add initial support for digital side of Avermedia m780 V4L/DVB: ngene: properly support boards where channel 0 isn't a TS input V4L-DVB: ngene: make sure that tuner headers are included ...
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-19V4L/DVB: fix dvb frontend lockupmatthieu castet
If my dvb device is removed while in use, I got the following oops: [ 4920.484084] Call Trace: [ 4920.484102] [<c102daad>] ? default_wake_function+0x0/0x8 [ 4920.484147] [<f8cb09e1>] ? dvb_unregister_frontend+0x95/0xcc [dvb_core] [ 4920.484157] [<c1044412>] ? autoremove_wake_function+0x0/0x2d [ 4920.484168] [<f8dd1af2>] ? dvb_usb_adapter_frontend_exit+0x12/0x21 [dvb_usb] [ 4920.484176] [<f8dd12f1>] ? dvb_usb_exit+0x26/0x88 [dvb_usb] [ 4920.484184] [<f8dd138d>] ? dvb_usb_device_exit+0x3a/0x4a [dvb_usb] [ 4920.484217] [<f7fe1b08>] ? usb_unbind_interface+0x3f/0xb4 [usbcore] [ 4920.484227] [<c11a4178>] ? __device_release_driver+0x74/0xb7 [ 4920.484233] [<c11a4247>] ? device_release_driver+0x15/0x1e [ 4920.484243] [<c11a3a33>] ? bus_remove_device+0x6e/0x87 [ 4920.484249] [<c11a26d6>] ? device_del+0xfa/0x152 [ 4920.484264] [<f7fdf609>] ? usb_disable_device+0x59/0xb9 [usbcore] [ 4920.484279] [<f7fdb9ee>] ? usb_disconnect+0x70/0xdc [usbcore] [ 4920.484294] [<f7fdc728>] ? hub_thread+0x521/0xe1d [usbcore] [ 4920.484301] [<c1044412>] ? autoremove_wake_function+0x0/0x2d [ 4920.484316] [<f7fdc207>] ? hub_thread+0x0/0xe1d [usbcore] [ 4920.484321] [<c10441e0>] ? kthread+0x61/0x66 [ 4920.484327] [<c104417f>] ? kthread+0x0/0x66 [ 4920.484336] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 If there are users (for example users == -2) : - dvb_unregister_frontend : - stop kernel thread with dvb_frontend_stop : - fepriv->exit = 1; - thread loop catch stop event and break while loop - fepriv->thread = NULL; and fepriv->exit = 0; - dvb_unregister_frontend wait on "fepriv->dvbdev->wait_queue" that fepriv->dvbdev->users==-1. The user finish : - dvb_frontend_release - set users to -1 - don't wait wait_queue because fepriv->exit != 1 => dvb_unregister_frontend never exit the wait queue. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: dvb/stv6110x: cleanup error handlingDan Carpenter
The "stv6110x" is NULL so we can just return directly without calling kfree(). Also I changed the printk() to make checkpatch.pl happy. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: Add lgdt3303 and mt2131 deps to KconfigDevin Heitmueller
Add the demod and tuner dependencies required for the Avermedia m780 to the Kconfig for the ngene driver. Thanks to Oliver Endriss for pointing this out. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: start separating out DVB functions into separate fileDevin Heitmueller
Start moving the dvb specific code to ngene-dvb.c. Note that there is still stuff in ngene-core.c which could potentially be moved out, but it will require considerable reworking of the logic in order to continue to properly support DVB while also being able to support transport streams coming from analog MPEG encoders. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: split out card specific code into a separate fileDevin Heitmueller
Split out the card profiles into a new file called ngene-cards.c. This is part of a larger refactoring of the driver in preparation for adding analog support. Note that this patch makes *no* functional change - all I did was cut/paste the code and add the function prototypes to ngene.h as needed. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: split out i2c code into a separate fileDevin Heitmueller
Split out the i2c related code from the ngene-core.c into a new file called ngene-i2c.c. This is part of a larger refactoring of the driver in preparation for adding analog support. Note that this patch makes *no* functional change - all I did was cut/paste the code and add the function prototypes to ngene.h as needed. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: add initial support for digital side of Avermedia m780Devin Heitmueller
Add ATSC/QAM support for the Avermedia m780. Note that this patch does not include any analog support for the board, as the ngene bridge driver does not yet have analog implemented Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ngene: properly support boards where channel 0 isn't a TS inputDevin Heitmueller
The current code assumes that channel zero is always a TS input, which would result in an oops if the "one_adapter" modprobe option is 1 (which it is by default) and the board in question has something else on channel zero (which is the case for the Avermedia m780, which has it's analog input wired to UVI1) The code now explicitly tracks the first adapter created and ensures that other channels cannot accidentially be associated with a NULL adapter. Also, eliminate what appears to be a typo where all of the channel parameters are getting associated with stream zero's properties, which will work if you happen to have a dual stream board with the exact same configuration, but if they differ then the second stream is going to end up with the first stream's configuration. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L-DVB: ngene: make sure that tuner headers are includedMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: media/az6027: handle -EIO failureDan Carpenter
If the az6027_usb_in_op() returns a negative errno ret is -EIO and in that case the value of b[0] may be undefined. The original code assigned 0 to ret, but since it's already 0 now we can skip that. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: media/az6027: doing dma on the stackDan Carpenter
I changed the dma buffers to use allocated memory instead of stack memory. The reason for this is documented in Documentation/DMA-API-HOWTO.txt under the section: "What memory is DMA'able?" That document was only added a couple weeks ago and there are still lots of modules which haven't been corrected yet. Btw. Smatch includes a pretty good test to find places which use stack memory as a dma buffer. That's how I found these. (http://smatch.sf.net). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: dvb-usb: gp8psk, fix potential null derefernceJiri Slaby
Stanse found that in gp8psk_load_bcm4500fw there is missing a check for return value of kmalloc. Add one and bail out appropriatelly. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: dib3000mc: reduce large stack usageRandy Dunlap
This patch reduces static stack usage of one of the 2 top offenders as listed by 'make checkstack': Building with CONFIG_FRAME_WARN=2048 produces: drivers/media/dvb/frontends/dib3000mc.c:853: warning: the frame size of 2224 bytes is larger than 2048 bytes and in 'make checkstack', the stack usage goes from: 0x00000bbd dib3000mc_i2c_enumeration [dib3000mc]: 2232 to unlisted with this patch. I don't have the hardware that is needed to test this patch. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: dib7000p: reduce large stack usage fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: dib7000p: reduce large stack usageRandy Dunlap
This patch reduces static stack usage of one of the 2 top offenders as listed by 'make checkstack': Building with CONFIG_FRAME_WARN=2048 produces: drivers/media/dvb/frontends/dib7000p.c:1367: warning: the frame size of 2320 bytes is larger than 2048 bytes and in 'make checkstack', the stack usage goes from: 0x00002409 dib7000p_i2c_enumeration [dib7000p]: 2328 to unlisted with this patch. Also change one caller of dib7000p_i2c_enumeration() to check its return value. I don't have the hardware that is needed to test this patch. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: Add Elgato EyeTV Diversity to dibcom driverMichael Müller
This patch introduces support for DVB-T for the following dibcom based card: Elgato EyeTV Diversity (USB-ID: 0fd9:0011) Support for the Elgato silver IR remote is added too (set parameter dvb_usb_dib0700_ir_proto=0) [w.sang@pengutronix.de: rebased to current linuxtv-master] Signed-off-by: Michael Müller <mueller_michael@alice-dsl.net> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19Revert "V4L/DVB: Add FE_CAN_PSK_8 to allow apps to identify PSK_8 capable ↵Mauro Carvalho Chehab
DVB devices" Patch reverted per Andreas Oberritter <obi@linuxtv.org> request. It is basically not ready yet for upstream merge. This reverts commit 77b2ad374a82e3d740cb1780ff4caedc3e051b37. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: Add FE_CAN_PSK_8 to allow apps to identify PSK_8 capable DVB devicesKlaus Schmidinger
The enum fe_caps provides flags that allow an application to detect whether a device is capable of handling various modulation types etc. A flag for detecting PSK_8, however, is missing. This patch adds the flag FE_CAN_PSK_8 to frontend.h and implements it for the gp8psk-fe.c and cx24116.c driver (apparently the only ones with PSK_8). Only the gp8psk-fe.c has been explicitly tested, though. Signed-off-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de> Tested-by: Derek Kelly <user.vdr@gmail.com> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ir-core: remove ir-functions usage from dm1105David Härdeman
Convert drivers/media/dvb/dm1105/dm1105.c to not rely on ir-functions.c. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: pt1: Support Earthsoft PT2HIRANO Takahito
Support Earthsoft PT2. Signed-off-by: HIRANO Takahito <hiranotaka@zng.info> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference"Bjørn Mork
Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Also clean up if we are unable to register the tuner and LNB drivers [mchehab@redhat.com: add printk log level, to calm down chechpatch.pl] Signed-off-by: Bjørn Mork <bjorn@mork.no> Reported-by: Fladischer Michael <FladischerMichael@fladi.at> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ds3000: fix divide-by-zero error in ds3000_read_snr()Nicolas Noirbent
Fix a divide-by-zero error in ds3000's ds3000_read_snr(), when getting a very low signal reading (dvbs2_signal_reading >= 1). This prevents some nasty EIPs when running szap-s2 with a very low signal strength. Signed-off-by: Nicolas Noirbent <nicolas.noirbent@smartjog.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: dvb/dib8000: fix build warningWolfram Sang
In file included from drivers/media/dvb/dvb-usb/dib0700_devices.c:14: drivers/media/dvb/frontends/dib8000.h: In function 'dib8000_get_adc_power': drivers/media/dvb/frontends/dib8000.h:112: warning: no return statement in function returning non-void Fixed by adding a return to the dummy function. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: DVB: ngene, remove unused #include <linux/version.h>Huang Weiyi
Remove unused #include <linux/version.h>('s) in drivers/media/dvb/ngene/ngene-core.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: Convert drivers/media/dvb/ttpci/budget-ci.c to use ir-coreDavid Härdeman
Converts drivers/media/dvb/ttpci/budget-ci.c to use ir-core rather than rolling its own keydown timeout handler and reporting keys via drivers/media/IR/ir-functions.c. [mchehab@redhat.com: Drop the call to ir_input_init() as it is no longer needed] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ir-core: Make use of the new IR keymap modulesMauro Carvalho Chehab
Instead of using the ugly keymap sequences, use the new rc-*.ko keymap files. For now, it is still needed to have one keymap loaded, for the RC code to work. Later patches will remove this depenency. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ir: prepare IR code for a parameter change at register functionMauro Carvalho Chehab
A latter patch will reuse the ir_input_register with a different meaning. Before it, change all occurrences to a temporary name. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: rename all *_rc_keys to ir_codes_*_nec_tableMauro Carvalho Chehab
Several DVB drivers use a different name convention. As we're moving the keytables, we need to use the same convention on all places. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: ir: use IR_KEYTABLE where an IR table is neededMauro Carvalho Chehab
Replaces most of the occurences of IR keytables on V4L drivers by a macro that evaluates to provide the name of the exported symbol. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: stv0900: Whitespace cleanupMauro Carvalho Chehab
Fixes sync with -hg tree Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: dvb-usb: enable specifying a separate generic bulk ctrl response ↵Michael Krufky
endpoint Some DVB USB devices use a separate endpoint for responses to control messages sent with bulk transfers via the generic_bulk_ctrl_endpoint. When generic_bulk_ctrl_endpoint_response is set, it will be used instead of the generic_bulk_ctrl_endpoint when reading usb responses in the dvb_usb_generic_rw helper function. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Reviewed-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: ir-core: export driver name used by IR via ueventMauro Carvalho Chehab
Now, both driver and keytable names are exported to userspace. This will help userspace to decide when a table need to be replaced by another one. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: Fix bad whitespacingMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: ngene: Add support for cineS2 v5 and SaTiX-S2 Dual v2Oliver Endriss
Add support for - Linux4Media cineS2 DVB-S2 Twin Tuner (v5) - Mystique SaTiX-S2 Dual (v2) Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: drivers/media: drop redundant memsetJulia Lawall
The region set by the call to memset is immediately overwritten by the subsequent call to memcpy. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e1,e2,e3,e4; @@ - memset(e1,e2,e3); memcpy(e1,e4,e3); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: stv090x: Add some notes about the internal tuner I/O controlManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: Budget/STV090x/STV6110x: Initialize the demodulator immediately ↵Andreas Regel
after the tuner is attached Signed-off-by: Andreas Regel <andreas.regel@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: [STV090x] Use gate control, while tuner is being accessedManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: [STV090x, STV6110x] Use tuner sleep within the demodulator controlManu Abraham
Oliver Endriss <o.endriss@gmx.de> pointed out: Imho not a good idea, as the frontend thread calls - fe->ops.tuner_ops.init - fe->ops.tuner_ops.sleep If you remove fe->ops.i2c_gate_ctrl, init and sleep will fail, because gate_ctrl was never called... -- Signed-off-by: Manu Abraham <manu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: [STV090x] Code simplificationManu Abraham
- Remove a redundant exported gate control function Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: AZ6027: Fix initialization for some cardsOleg Roitburd
Also add in some more device ID's Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: AZ6027: Add support for Technisat V1 deviceOleg Roitburd
Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: get_frontend for STV0900Abylay Ospan
Signed-off-by: Abylay Ospan <aospan@netup.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: af9015: support for KWorld TV Stick II (395UR)Antti Palosaari
Add USB ID 1b80:e39a for KWorld TV Stick II (395UR). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-18V4L/DVB: af9015: support for KWorld USB DVB-T Stick Mobile (UB383-T)Antti Palosaari
Add USB ID 1b80:e383 for KWorld USB DVB-T Stick Mobile (UB383-T). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v0.10.2 at 2024-08-04 13:25:11 (GMT)