summaryrefslogtreecommitdiff
path: root/drivers/media/dvb
AgeCommit message (Collapse)Author
2012-05-20[media] zl10353: change .read_snr() to report SNR as a 0.1 dBAntti Palosaari
Report SNR in 0.1 dB scale instead of raw hardware register values. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th tryMalcolm Priestley
Continuous flip of bit2 reg 0x70 can cause device to become unresponsive. Also correct reg read mistake. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] m88rs2000: LNB voltage control implementedIgor M. Liplianin
Trival patch to get it working with my cards stuff. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Acked-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] cx23885: TeVii s471 card supportIgor M. Liplianin
The card is similar to TeVii s470, but has different LNB power control. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl28xxu: add small sleep for rtl2830 demod attachAntti Palosaari
Demod needs some time to wake up after power on. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: prevent hw access when sleepingAntti Palosaari
to prevent I/O errors... Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .get_frontend()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .read_signal_strength()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .read_ber()Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] rtl2830: implement .read_snr()Antti Palosaari
Reports value as a 0.1 dB. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] drxk: fix GPIOsAntti Palosaari
UIO-2 and UIO-3 were broken. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] lg2160: Fix a few warningsMauro Carvalho Chehab
drivers/media/dvb/frontends/lg2160.c: In function ‘lg216x_read_ucblocks’: drivers/media/dvb/frontends/lg2160.c:1336:1: warning: label ‘fail’ defined but not used [-Wunused-label] drivers/media/dvb/frontends/lg2160.c:1325:6: warning: unused variable ‘ret’ [-Wunused-variable] drivers/media/dvb/frontends/lg2160.c:1324:23: warning: unused variable ‘state’ [-Wunused-variable] drivers/media/dvb/frontends/lg2160.c: In function ‘lg216x_set_ensemble’: drivers/media/dvb/frontends/lg2160.c:420:23: warning: ‘reg’ may be used uninitialized in this function [-Wuninitialized] Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] DVB: remove "stats" property bits from ATSC-MH API property additionsMichael Krufky
Mauro is proposing a new API to handle statistics. This functionality will be returned after the statistics API is ready. Just remove them for now. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] mxl111sf: add ATSC-MH supportMichael Krufky
Add support for the ATSC-MH frontend on the WinTV Aero-m Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] dvb-usb: increase MAX_NO_OF_FE_PER_ADAP from 2 to 3Michael Krufky
The following patch adds support for a third frontend to exist on a single DVB adapter, in the mxl111sf driver. This patch allows that to be possible. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] dvb-usb: add support for dvb-usb-adapters that deliver raw payloadMichael Krufky
Select this feature setting the dvb-usb-adapter caps field with DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] dvb-demux: add functionality to send raw payload to the dvr deviceMichael Krufky
If your driver needs to deliver the raw payload to userspace without passing through the kernel demux, use function: dvb_dmx_swfilter_raw Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] lg2160: Don't fill the legacy DVBv3 ops.type fieldMauro Carvalho Chehab
This field should not be used anymore inside the frontend drivers. The DVB core won't rely on it. Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] DVB: add support for the LG2160 ATSC-MH demodulatorMichael Krufky
This patch adds support for controlling the LG2160 and LG2161 ATSC-MH demodulators. [mchehab@redhat.com: fold with the next patch that was fixing the DVB ABI] Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] mxl111sf-tuner: tune SYS_ATSCMH just like SYS_ATSCMichael Krufky
The MxL111SF tuner is programmed the same way for ATSC-MH as it is programmed for ATSC. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-20[media] linux-dvb v5 API support for ATSC-MHMichael Krufky
Add the following properties for controlling an ATSC-MH frontend: DTV_ATSCMH_FIC_VER DTV_ATSCMH_PARADE_ID DTV_ATSCMH_NOG DTV_ATSCMH_TNOG DTV_ATSCMH_SGN DTV_ATSCMH_PRC DTV_ATSCMH_RS_FRAME_MODE DTV_ATSCMH_RS_FRAME_ENSEMBLE DTV_ATSCMH_RS_CODE_MODE_PRI DTV_ATSCMH_RS_CODE_MODE_SEC DTV_ATSCMH_SCCC_BLOCK_MODE DTV_ATSCMH_SCCC_CODE_MODE_A DTV_ATSCMH_SCCC_CODE_MODE_B DTV_ATSCMH_SCCC_CODE_MODE_C DTV_ATSCMH_SCCC_CODE_MODE_D DTV_ATSCMH_FIC_ERR DTV_ATSCMH_CRC_ERR DTV_ATSCMH_RS_ERR Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] af9015: various small changes and clean-upsAntti Palosaari
Clean-up dvb_usb_device_properties and fix errors reported by checkpatch.pl. Some other very minor changes. Functionality remains untouched. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] dib9000: get rid of Dib*Lock macrosAlexey Khoroshilov
The patch replaces Dib*Lock macros with direct calls to mutex functions as soon as they just make the driver code harder to review (per request of Mauro). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] rtl28xxu: dynamic USB ID supportAntti Palosaari
DVB USB core refuses to load driver when current USB ID does not match IDs on driver table. Due to that dynamic IDs does not work. Replace reference design ID by dynamic ID in .probe() in order to get it working. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] dib0700: Return -EINTR and unlock mutex if locking attempts failsSantosh Nayak
In 'dib0700_i2c_xfer_new()' and 'dib0700_i2c_xfer_legacy()' we are taking two locks: 1. i2c_mutex 2. usb_mutex If attempt to take 'usb_mutex' lock fails then the previously taken lock 'i2c_mutex' should be unlocked and -EINTR should be returned so that caller can take appropriate action. If locking attempt was interrupted by a signal then we should return -EINTR. At present we are returning '0' for such scenarios which is wrong. Replace -EAGAIN by -EINTR as a return type for the the scenario where locking attempt was interrupted by signal. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] cxd2820r: tweak search algorithm behaviorGianluca Gennari
MPIS based STBs running 3.x kernels and the Enigma2 OS are not able to tune DVB-T channels with the PCTV 290e using the current cxd2820r driver. DVB-T2 channels instead work properly. This patch fixes the problem by changing the condition to break out from the wait lock loop in the "search" function of the cxd2820r demodulator from FE_HAS_SIGNAL to FE_HAS_LOCK. As a consequence, the "search" function of the demodulator driver now returns DVBFE_ALGO_SEARCH_SUCCESS only if the frequency lock is successfully acquired. This behavior seems consistent with other demodulator drivers (e.g. stv090x, hd29l2, stv0900, stb0899, mb86a16). This patch has been successfully tested with DVB-T and DVB-T2 signals, on both PC and the mipsel STB running Enigma2. No apparent side effect has been observed on PC applications like Kaffeine. DVB-C is not available in my country so it's not tested. Signed-off-by: Gianluca Gennari <gennarone@gmail.com> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15Merge remote-tracking branch 'linus/master' into staging/for_v3.5Mauro Carvalho Chehab
* linus/master: (805 commits) tty: Fix LED error return openvswitch: checking wrong variable in queue_userspace_packet() bonding: Fix LACPDU rx_dropped commit. Linux 3.4-rc7 ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper MAINTAINERS: Add myself as the cpufreq maintainer dm mpath: check if scsi_dh module already loaded before trying to load dm thin: correct module description dm thin: fix unprotected use of prepared_discards list dm thin: reinstate missing mempool_free in cell_release_singleton gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers powerpc/irq: Fix another case of lazy IRQ state getting out of sync ks8851: Update link status during link change interrupt ... Conflicts: drivers/media/common/tuners/xc5000.c drivers/media/common/tuners/xc5000.h drivers/usb/gadget/uvc_queue.c
2012-05-15[media] lmedm04: Initialize a variable before its usageIl Han
The variable ret is used uninitialized. It should be initialized before used. Initialize it. Signed-off-by: Il Han <corone.il.han@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] it913x.: Fix a misuse of ||Malcolm Priestley
On Mon, 2012-05-07 at 07:45 -0300, Mauro Carvalho Chehab wrote: > Malcolm, > > Em 04-04-2012 20:00, Joe Perches escreveu: > > Likely these should be && not || > > > > drivers/scsi/FlashPoint.c: if(bit_cnt != 0 || bit_cnt != 8) > > > drivers/media/dvb/dvb-usb/it913x.c: if (ret == 0 || ret != -EBUSY || ret != -ETIMEDOUT) > > drivers/media/dvb/dvb-usb/it913x.c: if (ret == 0 || ret != -EBUSY || ret != -ETIMEDOUT) > > Could you please take a look on the above? Hmm... yes, thanks, also a bug. Just check for -EBUSY && -ETIMEDOUT Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] drivers/media: add missing __devexit_p() annotationsArnd Bergmann
Drivers that refer to a __devexit function in an operations structure need to annotate that pointer with __devexit_p so replace it with a NULL pointer when the section gets discarded. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-15[media] dvb/drxd: stub out drxd_attach when not builtArnd Bergmann
This avoids getting drivers/media/video/em28xx/em28xx-dvb.c:721: \ undefined reference to `drxd_attach' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For a some fix patches for v3.4, including a regression fix at DVB core" Fix up trivial conflicts in Documentation/feature-removal-schedule.txt * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] gspca - sonixj: Fix a zero divide in isoc interrupt [media] media: videobuf2-dma-contig: include header for exported symbols [media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer [media] media: vb2-memops: Export vb2_get_vma symbol [media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS [media] s5p-fimc: Fix locking in subdev set_crop op [media] dvb_frontend: fix a regression with DVB-S zig-zag [media] fintek-cir: change || to && [media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal [media] rc: Postpone ISR registration [media] marvell-cam: fix an ARM build error [media] V4L: soc-camera: protect hosts during probing from overzealous user-space
2012-05-14[media] av7110: fix v4l2_compliance test issuesHans Verkuil
Besides the usual inconsistencies in input enumeration there was also a kernel crash if you tried to poll on a vbi node. The checks for sliced vbi output vs vbi capture were not complete enough. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] fixes and add querystd support to mxbHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] saa7146: fix querycap, vbi/video separation and g/s_registerHans Verkuil
The querycap ioctl returned an incorrect version number and incorrect capabilities (mixing up vbi and video caps). The reason for that was that video nodes could do vbi activities: that should be separated between the vbi and video nodes. There were also a few minor problems with dbg_g/s_register that have been resolved. The mxb/saa7146 driver now passes the v4l2_compliance tests. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l/dvb: fix compiler warningsHans Verkuil
media_build/v4l/drxk_hard.c: In function 'DownloadMicrocode': media_build/v4l/drxk_hard.c:1388:6: warning: variable 'BlockCRC' set but not used [-Wunused-but-set-variable] media_build/v4l/drxk_hard.c:1384:6: warning: variable 'Drain' set but not used [-Wunused-but-set-variable] media_build/v4l/drxk_hard.c:1383:6: warning: variable 'Flags' set but not used [-Wunused-but-set-variable] media_build/v4l/lmedm04.c: In function 'lme2510_probe': media_build/v4l/lmedm04.c:1208:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/hopper_cards.c: In function 'hopper_irq_handler': media_build/v4l/hopper_cards.c:68:26: warning: variable 'lstat' set but not used [-Wunused-but-set-variable] media_build/v4l/mantis_cards.c: In function 'mantis_irq_handler': media_build/v4l/mantis_cards.c:76:26: warning: variable 'lstat' set but not used [-Wunused-but-set-variable] media_build/v4l/mantis_dma.c: In function 'mantis_dma_stop': media_build/v4l/mantis_dma.c:202:16: warning: variable 'mask' set but not used [-Wunused-but-set-variable] media_build/v4l/mantis_dma.c:202:6: warning: variable 'stat' set but not used [-Wunused-but-set-variable] media_build/v4l/mantis_evm.c: In function 'mantis_hifevm_work': media_build/v4l/mantis_evm.c:44:17: warning: variable 'gpif_mask' set but not used [-Wunused-but-set-variable] media_build/v4l/stb0899_drv.c: In function 'stb0899_init_calc': media_build/v4l/stb0899_drv.c:640:5: warning: variable 'agc1cn' set but not used [-Wunused-but-set-variable] media_build/v4l/stb0899_drv.c: In function 'stb0899_diseqc_init': media_build/v4l/stb0899_drv.c:830:13: warning: variable 'f22_rx' set but not used [-Wunused-but-set-variable] media_build/v4l/stb0899_drv.c:826:31: warning: variable 'tx_data' set but not used [-Wunused-but-set-variable] media_build/v4l/stv0900_sw.c: In function 'stv0900_track_optimization': media_build/v4l/stv0900_sw.c:838:26: warning: variable 'rolloff' set but not used [-Wunused-but-set-variable] media_build/v4l/ir-sanyo-decoder.c: In function 'ir_sanyo_decode': media_build/v4l/ir-sanyo-decoder.c:59:14: warning: variable 'not_address' set but not used [-Wunused-but-set-variable] media_build/v4l/mceusb.c: In function 'mceusb_dev_printdata': media_build/v4l/mceusb.c:523:46: warning: variable 'data5' set but not used [-Wunused-but-set-variable] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l/dvb: fix compiler warningsHans Verkuil
media_build/v4l/stb6100.c: In function 'stb6100_read_reg': media_build/v4l/stb6100.c:161:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable] media_build/v4l/cx24110.c: In function 'cx24110_read_ucblocks': media_build/v4l/cx24110.c:515:6: warning: variable 'lastbyer' set but not used [-Wunused-but-set-variable] media_build/v4l/dib9000.c: In function 'dib9000_mbx_process': media_build/v4l/dib9000.c:711:6: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] media_build/v4l/zl10353.c: In function 'zl10353_init': media_build/v4l/zl10353.c:562:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable] media_build/v4l/stv0297.c: In function 'stv0297_set_frontend': media_build/v4l/stv0297.c:417:16: warning: variable 'starttime' set but not used [-Wunused-but-set-variable] media_build/v4l/lgs8gxx.c: In function 'lgs8gxx_set_mode_manual': media_build/v4l/lgs8gxx.c:265:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/af9013.c: In function 'af9013_statistics_work': media_build/v4l/af9013.c:517:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/stv090x.c: In function 'stv090x_optimize_track': media_build/v4l/stv090x.c:2845:23: warning: variable 'rolloff' set but not used [-Wunused-but-set-variable] media_build/v4l/stv090x.c: In function 'stv090x_algo': media_build/v4l/stv090x.c:3177:28: warning: variable 'no_signal' set but not used [-Wunused-but-set-variable] media_build/v4l/it913x-fe.c: In function 'it913x_fe_read_ber': media_build/v4l/it913x-fe.c:636:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/it913x-fe.c: In function 'it913x_fe_get_frontend': media_build/v4l/it913x-fe.c:661:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/it913x-fe.c: In function 'it913x_fe_set_frontend': media_build/v4l/it913x-fe.c:694:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/m88rs2000.c: In function 'm88rs2000_set_fec': media_build/v4l/m88rs2000.c:657:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/dst_ca.c: In function 'ca_send_message': media_build/v4l/dst_ca.c:480:15: warning: variable 'ca_message_header_len' set but not used [-Wunused-but-set-variable] media_build/v4l/smssdio.c: In function 'smssdio_interrupt': media_build/v4l/smssdio.c:117:11: warning: variable 'isr' set but not used [-Wunused-but-set-variable] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] dw2102: fix compile warningsHans Verkuil
media_build/v4l/dw2102.c:151:13: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/dw2102.c:224:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/dw2102.c:279:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/dw2102.c:352:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/dw2102.c:435:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/dw2102.c:499:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] af9035: add few new reference design USB IDsAntti Palosaari
Add all known reference design USB IDs. Rename two earlier reference design USB IDs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] af9035: remove one config parameterAntti Palosaari
We can use tuner ID instead of HW not supported flag. Lesser code is better code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] af9035: move device configuration to the stateAntti Palosaari
Fixes most problems when having more than one device connected as demod and tuner configurations are not shared. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] af9033: implement ber and ucb functionsHans-Frieder Vogt
af9033: implement read_ber and read_ucblocks functions. Version 2 of patch that reflects my findings on the behaviour of abort_cnt, err_cnt and bit_cnt: - bit_cnt is always 0x2710 (10000) - abort_cnt is between 0 and 0x2710 - err_cnt is between 0 and 640000 (= 0x2710 * 8 * 8) in the current implementation BER is calculated as the number of bit errors per processed bits, ignoring those bits that are already discarded and counted in abort_cnt, i.e. UCBLOCKS. Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] af9035: add remote control supportHans-Frieder Vogt
Signed-off-by: Hans-Frieder Vogt <hfvogt@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] af9035: remove unused structAntti Palosaari
Not used anymore since new firmware downloader. I forget to remove those earlier when changed firmware downloader. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] af9035: various small changes for af9035_ctrl_msg()Antti Palosaari
Fix USB buffer len to maximum possible. Various log writing fixes, remove extra new lines and excessive type casts. Rename and type change some variables. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-08[media] dvb_frontend: fix a regression with DVB-S zig-zagMauro Carvalho Chehab
Changeset 5bfaadde broke zig-zag for DVB-S drivers that don't implement get_tune_settings() callback. Fix the code, in order to allow it to work as before, otherwise some channels may not be tuned anymore. Fix Fedora Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=814404 Cc: stable@kernel.org # for Kernel v3.3 Reported-by: Michael Heijenga <database.worker@googlemail.com> Tested-by: Michael Heijenga <database.worker@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-03[media] smsusb: add autodetection support for USB ID 2040:c0a0Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-26[media] ngene: remove an unneeded conditionDan Carpenter
"stat" is always zero here. The condition used to be needed, but we shifted stuff around in 0f0b270f90 "[media] ngene: CXD2099AR Common Interface driver". This doesn't change how the code works, it's just a bit tidier. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-21Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on Kaffeine (Fedora 16 Bugzilla #812895); - Fixes a mutex unlock at an error condition at drx-k; - Fix winbond-cir set mode; - mt9m032: Fix a compilation breakage with some random Kconfig; - mt9m032: fix two dead locks; - xc5000: don't require an special firmware (that won't be provided by the vendor) just because the xtal frequency is different; - V4L DocBook: fix some typos at multi-plane formats description. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware [media] V4L: mt9m032: fix compilation breakage [media] V4L: DocBook: Fix typos in the multi-plane formats description [media] V4L: mt9m032: fix two dead-locks [media] rc-core: set mode for winbond-cir [media] drxk: Does not unlock mutex if sanity check failed in scu_command() [media] dvb_frontend: Fix a regression when switching back to DVB-S
2012-04-19[media] pluto2: remove some dead codeDan Carpenter
buf[] is a 4 character array. Perhaps this was some debugging code from back in the day? Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v0.10.2 at 2024-11-07 01:15:38 (GMT)