summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)Author
2011-10-08[media] it913x-fe changes to power up and down of tunerMalcolm Priestley
Currently the tuner is constantly powered causing these effects. 1. Remembering last tune channel causing corruptions of changing channel. 2. Causing corruption on other frontend. 3. Higher current in standby of demodulator with clock running. Power sequence now follows; Power Up Tuner on -> Frontend suspend off -> Tuner clk on Power Down Frontend suspend on -> Tuner clk off -> Tuner off Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] tvp5150: Add video format registers configuration valuesJavier Martinez Canillas
The tvp5150 video decoder has two operation modes to configure the video standard used. If auto-switch mode is enable, the device can sense the signal and detect which video standard the device is operating. Also the device can be forced to use a user defined video standard. Each operation mode uses a different register and the bitmask values to represent each standard is different. So we add video standard constants for both autoswitch and no-autoswitch mode. Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] drivers/media: fix dependencies in video mt9t001/mt9p031Paul Gortmaker
Both mt9t001.c and mt9p031.c have two identical issues, those being that they will need module.h inclusion for the upcoming cleanup going on there, and that their dependencies don't limit selection of configs that will fail to compile as follows: The related config options are CONFIG_MEDIA_CONTROLLER and CONFIG_VIDEO_V4L2_SUBDEV_API. Looking at the code, it appears that the driver was never intended to work without these enabled, so add a dependency on CONFIG_VIDEO_V4L2_SUBDEV_API, which in turn already has a dependency on CONFIG_MEDIA_CONTROLLER. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] em28xx: Add VIDIOC_QUERYSTD supportMauro Carvalho Chehab
Allow subdevs to return the detected standards Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] msp3400: Add standards detection to the driverMauro Carvalho Chehab
As msp3400 allows standards detection, add support for it. That efectivelly means that devices with msp3400 can now implement VIDIOC_QUERYSTD, and it will provide very good detection for the standard, specially if combined with a video decoder detection. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] pvrusb2: initialize standards mask before detecting standardMauro Carvalho Chehab
Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] saa7115: Trust that V4L2 core will fill the maskMauro Carvalho Chehab
Instead of using V4L2_STD_ALL when no standard is detected, trust that the maximum allowed standards are already filled by the V4L2 core. It is better this way, as the bridge and/or the audio decoder may have some extra restrictions to some video standards. This also allow other devices like audio and tuners to contribute to standards detection, when they support such feature. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] v4l2-ioctl: Fill the default value for VIDIOC_QUERYSTDMauro Carvalho Chehab
According with the V4L2 API spec: "When detection is not possible or fails, the set must contain all standards supported by the current video input or output." The V4L2 core has the mask with all supported standards already. So, apply it. Driver and subdevs can then just remove standards from the mask, as they're able of detecting audio, video and frames frequency. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] pvrusb2: implement VIDIOC_QUERYSTDMauro Carvalho Chehab
Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-08[media] saa7115: Fix standards detectionMauro Carvalho Chehab
There are several bugs at saa7115 standards detection: After the fix, the driver is returning the proper standards, as tested with 3 different broadcast sources: On an invalid channel (without any TV signal): [ 4394.931630] saa7115 15-0021: Status byte 2 (0x1f)=0xe0 [ 4394.931635] saa7115 15-0021: detected std mask = 00ffffff With a PAL/M signal: [ 4410.836855] saa7115 15-0021: Status byte 2 (0x1f)=0xb1 [ 4410.837727] saa7115 15-0021: Status byte 1 (0x1e)=0x82 [ 4410.837731] saa7115 15-0021: detected std mask = 00000900 With a NTSC/M signal: [ 4422.383893] saa7115 15-0021: Status byte 2 (0x1f)=0xb1 [ 4422.384768] saa7115 15-0021: Status byte 1 (0x1e)=0x81 [ 4422.384772] saa7115 15-0021: detected std mask = 0000b000 Tests were done with a WinTV PVR USB2 Model 29xx card. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-07Merge branch 'pm-qos' into pm-for-linusRafael J. Wysocki
* pm-qos: PM / QoS: Update Documentation for the pm_qos and dev_pm_qos frameworks PM / QoS: Add function dev_pm_qos_read_value() (v3) PM QoS: Add global notification mechanism for device constraints PM QoS: Implement per-device PM QoS constraints PM QoS: Generalize and export constraints management code PM QoS: Reorganize data structs PM QoS: Code reorganization PM QoS: Minor clean-ups PM QoS: Move and rename the implementation files
2011-10-07Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: net/batman-adv/soft-interface.c
2011-10-03OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility settingArchit Taneja
On OMAP3, in order to enable alpha blending for LCD and TV managers, we needed to set LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits in DISPC_CONFIG. On OMAP4, alpha blending is always enabled by default, if the above bits are set, we switch to an OMAP3 compatibility mode where the zorder values in the pipeline attribute registers are ignored and a fixed priority is configured. Rename the manager_info member "alpha_enabled" to "partial_alpha_enabled" for more clarity. Introduce two dss_features FEAT_ALPHA_FIXED_ZORDER and FEAT_ALPHA_FREE_ZORDER which represent OMAP3-alpha compatibility mode and OMAP4 alpha mode respectively. Introduce an overlay cap for ZORDER. The DSS2 user is expected to check for the ZORDER cap, if an overlay doesn't have this cap, the user is expected to set the parameter partial_alpha_enabled. If the overlay has ZORDER cap, the DSS2 user can assume that alpha blending is already enabled. Don't support OMAP3 compatibility mode for now. Trying to read/write to alpha_blending_enabled sysfs attribute issues a warning for OMAP4 and does not set the LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits. Change alpha_enabled to partial_alpha_enabled in the omap_vout driver. Use overlay cap "OMAP_DSS_OVL_CAP_GLOBAL_ALPHA" to check if overlay supports alpha blending or not. Replace this with checks for VIDEO1 pipeline. Cc: linux-media@vger.kernel.org Cc: Lajos Molnar <molnar@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30[media] dib9000: release a lock on errorDan Carpenter
This lock should be released as well on the error path. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Patrick Boettcher <Patrick.Boettcher@dibcom.fr> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-30[media] mxl111sf: fix a couple precedence bugsDan Carpenter
Negate has higher precedence than bitwise AND. I2C_M_RD is 0x1 so the original code is equivelent to just checking if (!msg->flags). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-30OMAPDSS: remove vaddr from overlay infoTomi Valkeinen
overlay_info struct, used to configure overlays, currently includes both physical and virtual addresses for the pixels. The vaddr was added to support more exotic configurations where CPU would be used to update a display, but it is not currently used and there has been no interest in the feature. Using CPU to update a screen is also less interesting now that OMAP4 has two LCD outputs. This patch removes the vaddr field, and modifies the users of omapdss accordingly. This makes the use of omapdss a bit simpler, as the user doesn't need to think if it needs to give the vaddr. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-27treewide: Correct spelling of successfully in commentsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-26Revert "[media] siano: apply debug flag to module level"Mauro Carvalho Chehab
This reverts commit ea3709435c7f2da8852c3d676874cd727253fc60. As reported by Stephen Rothwell: After merging the v4l-dvb tree, today's linux-next build (x86_64 allmodconfig) failed like this: ERROR: "sms_dbg" [drivers/media/dvb/siano/smsusb.ko] undefined! ERROR: "sms_dbg" [drivers/media/dvb/siano/smsdvb.ko] undefined! Caused by commit ea3709435c7f ("[media] siano: apply debug flag to module level"). Relevant config: CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_USB_DRV=m CONFIG_SMS_SDIO_DRV=m Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-26[media] v4l: mem2mem: add wait_{prepare,finish} ops to m2m_testdevMichael Olbrich
These are necessary to prevent dead-locks e.g. if one thread waits in dqbuf at one end and another tries to queue a buffer at the other end. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Pawel Osciak <pawel@osciak.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-26[media] s5p-tv: fix mbus configurationTomasz Stanislawski
This patch fixes mbus configuration between Mixer, SDO and HDMI. The SDO accepts only YUV444 on input. The HDMI in DVI mode accepts only RGB888. Now Mixer is choosing proper output format depending on mbus format. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-26[media] s5p-tv: hdmi: use DVI modeTomasz Stanislawski
Current version of the driver does not support HDMI features not present in DVI standard. Therefore DVI mode is used to keep compatibility with DVI devices. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-26[media] s5p-tv: Add PM_RUNTIME dependencyHatim Ali
The TVOUT driver requires PM_RUNTIME support for proper clock enabling. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-26[media] em28xx: replug locking cleanupChris Rankin
Simplifies the locking by moving the em28xx_init_extension() call until em28xx_usb_probe() has finished with the dev->lock mutex. It therefore makes the second and subsequent "plugging" events logically identical to the first "plugging" event when the em28xx-dvb and em28xx-alsa modules must be loaded (i.e. registered). Basically, em28xx_usb_probe() requests that em28xx-dvb be loaded and also triggers udev to initialise the V4L2 devices. These two events are serialised by the dev->lock mutex but the order that they happen in is undefined. But this has always been the case anyway. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-26[media] em28xx: remove unused prototypesChris Rankin
This patch just removes the prototypes for the two functions that I've already deleted in my previous patches. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-25[media] em28xx: fix deadlock when unplugging and replugging a DVB adapterChris Rankin
This fixes the deadlock that occurs with either multiple PCTV 290e adapters or when a single PCTV 290e adapter is replugged. For DVB devices, the device lock must now *not* be held when adding/removing either a device or an extension to the respective lists. (Because em28xx_init_dvb() will want to take the lock instead). Conversely, for Audio-Only devices, the device lock *must* be held when adding/removing either a device or an extension to the respective lists. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-25[media] stv090x: set status bits when there is no lockGuy Martin
Currently, the stv090x driver only set the status bits to SCVYL when there is a lock. This patch set the right bits even if there is no lock. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-25[media] Increase a timeout, so that bad scheduling does not accidentially ↵Hans Petter Selasky
cause a timeout --HPS >From 18faaafc9cbbe478bb49023bbeae490149048560 Mon Sep 17 00:00:00 2001 Signed-off-by: Hans Petter Selasky <hselasky@c2i.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-25[media] Refactor Mantis DMA transfer to deliver 16Kb TS data per interruptMarko Ristola
With VDR streaming HDTV into network, generating an interrupt once per 16kb, implemented in this patch, seems to support more robust throughput with HDTV. Fix leaking almost 64kb data from the previous TS after changing the TS. One effect of the old version was, that the DMA transfer and driver's DMA buffer access might happen at the same time - a race condition. Signed-off-by: Marko M. Ristola <marko.ristola@kolumbus.fi> Reviewed-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-25[media] stb0899: Removed an extra byte sent at init on DiSEqC busFlorent AUDEBERT
I noticed a stray 0x00 at init on DiSEqC bus (KNC1 DVB-S2) with a DiSEqC tool analyzer. I removed the register from initialization table and all seem to go well (at least for my KNC board). Signed-off-by: Florent Audebert <florent.audebert@anevia.com> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] em28xx: fix race on disconnectChris Rankin
This patch closes the race on the device and extension lists at USB disconnect time. Previously, the device was removed from the device list during em28xx_release_resources(), and then passed to the em28xx_close_extension() function so that all extensions could run their fini() operations. However, this left a (brief, theoretical, highly unlikely ;-)) window between these two calls during which a new module could call em28xx_register_extension(). The result would have been that the em28xx_usb_disconnect() function would also have passed the device to the new extension's fini() function, despite never having called the extension's init() function. This patch also restores em28xx_close_extension()'s symmetry with em28xx_init_extension(), and establishes the property that every device in the device list must have been initialised for every extension in the extension list. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] cx23885, cx25840: Provide IR Rx timeout event reportsAndy Walls
(Resending because Mauro reported losing some emails on IRC) Provide CX2388[578] IR receive timeout (RTO) reports in the final space raw event sent up the chain to the raw IR pulse decoders. This should allow the lirc decoder to actually measure the inter-transmission gap properly. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] m5mols: Remove superfluous irq field from the platform data structSylwester Nawrocki
There is no need to put the IRQ number in driver's private platform data structure as this can also be passed in struct i2c_lient.irq. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] s5p-fimc: Convert to use generic media bus polarity flagsSylwester Nawrocki
Switch to generic media bus signal polarity flags and allow configuring the FIELD signal polarity. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] dvb: Add support for pctv452eIgor M. Liplianin
Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] media, rc: Use static inline functions to kill warningsPekka Enberg
This patch converts some ifdef'd wrapper functions from macros to static inline functions to kill the following warnings issued by GCC: CC [M] drivers/media/rc/ir-raw.o drivers/media/rc/ir-raw.c: In function ‘init_decoders’: drivers/media/rc/ir-raw.c:353:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:354:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:355:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:356:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:357:2: warning: statement with no effect [-Wunused-value] drivers/media/rc/ir-raw.c:359:2: warning: statement with no effect [-Wunused-value] Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Jarod Wilson <jarod@redhat.com> Cc: <linux-media@vger.kernel.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - main: Display the subdriver name and version at probe timeJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - main: Version change to 2.14.0Jean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - sn9c20x: Fix status LED device 0c45:62b3Frank Schaefer
Tested with webcam "SilverCrest WC2130". Signed-off-by: Frank Schaefer <fschaefer.oss@googlemail.com> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - zc3xx: New webcam 03f0:1b07 HP Premium Starter CamWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - spca1528: Don't force the USB transfer alternate settingJean-François Moine
As the choice of the alternate setting has been enhanced in the gspca main, forcing its number here is no more useful. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - spca1528: Change the JPEG quality of the imagesJean-François Moine
The JPEG quality was guessed as around 82%. Information in ms-win drivers says it should be 85%. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - spca1528: Add some comments and update copyrightJean-François Moine
Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - spca1528: Increase the status waiting timeJean-François Moine
Some webcams ask for a greater time to start. This patch increases the delay before timeout error on capture start. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - topro: New subdriver for Topro webcamsJean-François Moine
This driver is based on Anders Blomdell's source proposed in april 2009. It has been extended to handle the tp6810 bridge and the soi763a sensor. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - main: Handle the xHCI error on usb_set_interface()Jean-François Moine
This patch is adapted from a patch from Sarah Sharp (2010/05/03). The xHCD handler checks the USB bandwidth on usb_set_interface() instead of on usb_submit_urb(). Now, the same treatment is applied in case of error of both functions. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - main: Use a better altsetting for image transferJean-François Moine
Previously image transfer used to use the highest altsetting, which, most of the time, took the whole USB bandwidth. Now, the altsetting is chosen according to an estimation of the bandwidth needed for image transfer. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] gspca - benq: Remove the useless function sd_isoc_initJean-François Moine
The sd_isoc_init() did only a set interface which is done in gspca main. Signed-off-by: Jean-François Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] it913x-fe: correct tuner settingstvboxspy
Correct tuner settings for more accuracy. This now makes the tuner section more compatible with other versions of the IT913X series. TODOs Version 2 chip Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-24[media] it913x: add remote control supporttvboxspy
Add remote support for KWORLD UB499-2T-T09 The remote supplied is the same as KWORLD_315U. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>