summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2011-04-12mfd: Fetch cell pointer from platform_device->mfd_cellSamuel Ortiz
In order for MFD drivers to fetch their cell pointer but also their platform data one, an mfd cell pointer is added to the platform_device structure. That allows all MFD sub devices drivers to be MFD agnostic, unless they really need to access their MFD cell data. Most of them don't, especially the ones for IPs used by both MFD and non MFD SoCs. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg KH <gregkh@suse.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-28Merge branch 'for-torvalds' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: mach-ux500: configure board for the TPS61052 regulator v2 mach-ux500: provide ab8500 init vector mach-ux500: board support for AB8500 GPIO driver gpio: driver for 42 AB8500 GPIO pins
2011-03-28MFD: allow cs5535-mfd to build on X86 onlyAndres Salomon
Stephen ran into the following build error: drivers/mfd/cs5535-mfd.c:30:22: error: asm/olpc.h: No such file or directory olpc.h exists only on x86 (and in the future, ARM). Rather than wrapping the include in an #ifdef, just change cs5535-mfd to only build on x86. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-28gpio: driver for 42 AB8500 GPIO pinsBibek Basu
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-26mfd: Clean up max8997 IRQ namespaceSamuel Ortiz
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: Fold irq_set_chip/irq_set_handlerThomas Gleixner
Use the combined irq_set_chip_and_handler() function instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: Cleanup irq namespaceThomas Gleixner
Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: twl6030: Cleanup interrupt handlingThomas Gleixner
irq_desc checking in the interrupt demux routine is totally pointless. The driver sets those lines up, so that cant go away magically. Remove the open coded handler magic and use the proper accessor. This driver needs to be converted to threaded interrupts and buslock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: twl4030: Cleanup interrupt handlingThomas Gleixner
irq_desc checking in a function which is called with that irq descriptor locked, is pointless. Equally pointless as the irq desc check in the interrupt service routine. The driver sets those lines up, so that cant go away magically. Remove the open coded handler magic and use the proper accessor. No need to fiddle with irq_desc in the type setting function. The original value is in irq_data and the core code stores the new setting when the return value is 0. This driver needs to be converted to threaded interrupts and buslock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: mx8925: Remove irq_desc leftoversThomas Gleixner
Remove unused code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: htc-i2cpld: Cleanup interrupt handlingThomas Gleixner
Remove the pointless irq_desc check in set_type. This function is called with that irq descriptor locked. Also remove the write back of the flow type as the core code does this already when the return value is 0. Also store the flow type in the chip data structure, so there is no need to fiddle in the irq descriptor. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: htc-egpio: Cleanup interrupt handlingThomas Gleixner
Replace the open coded handler call with the prober accessor. Retrieve the handler data from desc. That avoids a redundant lookup in the sparse irq case. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: ezx-pcap: Remvove open coded irq handlingThomas Gleixner
There is no point in checking irq_desc here, as it _is_ available. The driver configured those lines, so they cannot go away. The home brewn disabled/note_interrupt magic can be removed as well by adding a irq_disable callback which avoids the lazy disable. That driver needs to be converted to threaded interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: 88pm860x: Remove unused irq_desc leftoversThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: asic3: Cleanup irq handlingThomas Gleixner
Remove the open coded access to irq_desc and use the proper wrappers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: Select MFD_CORE if TPS6105X driver is configuredGuenter Roeck
The TPS61050/61052 driver uses MFD core code, yet does not specify the dependency in Kconfig. If it is the only MFD driver configured, compilation fails with ERROR: "mfd_add_devices" [drivers/mfd/tps6105x.ko] undefined! ERROR: "mfd_remove_devices" [drivers/mfd/tps6105x.ko] undefined! Fix the problem by adding "select MFD_CORE" to the respective Kconfig entry. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: Add MODULE_DEVICE_TABLE to rdc321x-southbridgeAxel Lin
The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entry will be added to modules.pcimap: rdc321x-southbridge 0x000017f3 0x00006030 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: Add MAX8997/8966 IRQ controlMyungJoo Ham
This patch enables IRQ handling for MAX8997/8966 chips. Please note that Fuel-Gauge-related IRQs are not implemented in this initial release. The fuel gauge module in MAX8997 is identical to MAX17042, which is already in Linux kernel. In order to use the already-existing MAX17042 driver for fuel gauge module in MAX8997, the main interrupt handler of MAX8997 should relay related interrupts to MAX17042 driver. However, in order to do this, we need to modify MAX17042 driver as well because MAX17042 driver does not have any interrupt handlers for now. We are not going to implement this in this initial release as it is not crucial in basic operations of MAX8997. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: Constify i2c_device_id tablesAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Harald Welte <laforge@gnumonks.org> Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: OLPC: Clean up names to match what OLPC actually usesDaniel Drake
The cs5535-pms cell doesn't actually need to be cloned, so we can drop that and simply have the olpc-xo1.c driver use "cs5535-pms" directly. Also, rename the cs5535-acpi clones to what we actually use for the (currently out-of-tree) SCI driver. In the process, that fixes a subtle bug in olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not something that actually existed. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-26mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to itAndres Salomon
Replace mfd_shared_platform_driver_register with mfd_clone_cell. The former was called by an mfd client, and registered both a platform driver and device. The latter is called by an mfd driver, and registers only a platform device. The downside of this is that mfd drivers need to be modified whenever new clients are added that share a cell; the upside is that it fits Linux's driver model better. It's also simpler. This also converts cs5535-mfd/olpc-xo1 from the old API. cs5535-mfd now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to them via platform drivers. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-25mmc: tmio: convert the SDHI MMC driver from MFD to a platform driverGuennadi Liakhovetski
On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO MFD cell driver. Now that the tmio_mmc driver has been split into a core and a separate MFD glue, we can support SDHI natively without the need to emulate an MFD controller. This also allows to support systems with an on-SoC SDHI controller and a separate MFD with a TMIO core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits) [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE [media] v4l: soc-camera: Store negotiated buffer settings [media] rc: interim support for 32-bit NEC-ish scancodes [media] mceusb: topseed 0x0011 needs gen3 init for tx to work [media] lirc_zilog: error out if buffer read bytes != chunk size [media] lirc: silence some compile warnings [media] hdpvr: use same polling interval as other OS [media] ir-kbd-i2c: pass device code w/key in hauppauge case [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping [media] rc-rc5-hauppauge-new: Add support for the old Black RC [media] rc-rc5-hauppauge-new: Add the old control to the table [media] rc-winfast: Fix the keycode tables [media] a800: Fix a few wrong IR key assignments [media] opera1: Use multimedia keys instead of an app-specific mapping [media] dw2102: Use multimedia keys instead of an app-specific mapping ... Fix up trivial conflicts (remove/modify and some real conflicts) in: arch/arm/mach-omap2/devices.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/dabusb/dabusb.c drivers/staging/dabusb/dabusb.h drivers/staging/easycap/easycap_ioctl.c drivers/staging/usbvideo/usbvideo.c drivers/staging/usbvideo/vicam.c
2011-03-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (90 commits) mfd: Push byte swaps out of wm8994 bulk read path mfd: Rename ab8500 gpadc header mfd: Constify WM8994 write path mfd: Push byte swap out of WM8994 bulk I/O mfd: Avoid copying data in WM8994 I2C write mfd: Remove copy from WM831x I2C write function mfd: Staticise WM8994 PM ops regulator: Add a subdriver for TI TPS6105x regulator portions v2 mfd: Add a core driver for TI TPS61050/TPS61052 chips v2 gpio: Add Tunnel Creek support to sch_gpio mfd: Add Tunnel Creek support to lpc_sch pci_ids: Add Intel Tunnel Creek LPC Bridge device ID. regulator: MAX8997/8966 support mfd: Add WM8994 bulk register write operation mfd: Append additional read write on 88pm860x mfd: Adopt mfd_data in 88pm860x input driver mfd: Adopt mfd_data in 88pm860x regulator mfd: Adopt mfd_data in 88pm860x led mfd: Adopt mfd_data in 88pm860x backlight mfd: Fix MAX8997 Kconfig entry typos ...
2011-03-23mfd: Push byte swaps out of wm8994 bulk read pathMark Brown
For consistency with the write path push byte swaps of the WM8994 register data out of the bulk read data path into the per-register APIs. The only user of the bulk register read is the interrupt code which is updated to do the swaps itself part of this patch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Rename ab8500 gpadc headerLinus Walleij
Rename AB8500 GPADC header so as not to be redunantly named. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Constify WM8994 write pathMark Brown
Allow const buffers to be passed in without type safety issues. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Push byte swap out of WM8994 bulk I/OMark Brown
For bulk I/O it is both convenient and more sensible to pre-swap the data rather than doing the swap as part of the I/O operation so move the byte swaps we're currently doing into the core write function into the register based functions, giving the bulk write function a straight pass through to the chip. This leaves reads inconsistent, this will be addressed as a followup patch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Avoid copying data in WM8994 I2C writeMark Brown
As well as providing a trivial performance optimisation this also avoids allocating a copy of the message on the stack which is beneficial when doing large transfers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Remove copy from WM831x I2C write functionMark Brown
This saves us allocating an array on the stack, giving a meaningless performance improvement and ensuring that if drivers ever do large writes we'll not allocate large arrays on the stack. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Staticise WM8994 PM opsMark Brown
They're not exported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23regulator: Add a subdriver for TI TPS6105x regulator portions v2Linus Walleij
This adds a subdriver for the regulator found inside the TPS61050 and TPS61052 chips. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add a core driver for TI TPS61050/TPS61052 chips v2Linus Walleij
The TPS61050/TPS61052 are boost converters, LED drivers, LED flash drivers and a simple GPIO pin chips. Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add Tunnel Creek support to lpc_schDenis Turischev
Intel Poulsbo SCH and Tunnel Creek provide almost the same LPC interface. Use the same driver for both devices while storing PCI ID to distinguish between platforms to apply plarform related quirks. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add WM8994 bulk register write operationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Append additional read write on 88pm860xHaojian Zhuang
Append the additional read/write operation on 88pm860x for accessing test page in 88PM860x. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Adopt mfd_data in 88pm860x input driverHaojian Zhuang
Copy 88pm860x platform data into different mfd_data structure for onkey/touch/codec/power driver. So move the identification of device node from those drivers to mfd driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Adopt mfd_data in 88pm860x regulatorHaojian Zhuang
Copy 88pm860x platform data into different mfd_data structure for regulator driver. So move the identification of device node from regulator driver to mfd driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Adopt mfd_data in 88pm860x ledHaojian Zhuang
Copy 88pm860x platform data into different mfd_data structure for led driver. So move the identification of device node from led driver to mfd driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Adopt mfd_data in 88pm860x backlightHaojian Zhuang
Copy 88pm860x platform data into different mfd_data structure for backlight driver. So move the identification of device node from backlight driver to mfd driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Fix MAX8997 Kconfig entry typosRandy Dunlap
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add "platform:" prefix for twl4030-madc platform modaliasAxel Lin
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Fix ab8500-gpadc to measure charger currentKarl Komierowski
The GPADC in the AB8500 was incorrectly configured when a charger current channel was selected. Signed-off-by: Karl Komierowski <karl.komierowski@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Calibrate ab8500 gpadc using OTP valuesJohan Palsson
The GPADC found in the AB8500 needs to be calibrated to work properly. This is done by writing a number of special OTP (one-time-programmable) registers at production. This patch makes sure that these values are used to calibrate the returned value from the GPADC so that it is correct. Signed-off-by: Johan Palsson <johan.palsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Free dangling irq in ab8500 gpadc probe error pathDaniel Willerud
Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Reentrance and revamp ab8500 gpadc fetching interfaceDaniel Willerud
This revamps the interface so that AB8500 GPADCs are fetched by name. Probed GPADCs are added to a list and this list is searched for a matching GPADC. This makes it possible to have multiple AB8500 GPADC instances instead of it being a singleton, and rids the need to keep a GPADC pointer around in the core AB8500 MFD struct. Currently the match is made to the device name which is by default numbered from the device instance such as "ab8500-gpadc.0" but by using the .init_name field of the device a more intiutive naming for the GPADC blocks can be achieved if desired. Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Move ab8500 gpadc header to subdirDaniel Willerud
This moves the ab8500-gpadc.h header down into the ab8500/ subdir in include/linux/mfd and fixes some whitespace in the header in the process. Signed-off-by: Daniel Willerud <daniel.willerud@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: MAX8997/8966 supportMyungJoo Ham
MAX8997/MAX8966 chip is a multi-function device with I2C bussses. The chip includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and Battery (charging) control. This patch is an initial release of a MAX8997/8966 driver that supports to enable the chip with its primary I2C bus that connects every device mentioned above except for Fuel Gauge, which uses another I2C bus. The fuel gauge is not supported by this mfd driver and is supported by a seperated driver of MAX17042 Fuel Gauge (yes, the fuel gauge part is compatible with MAX17042). Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>