summaryrefslogtreecommitdiff
path: root/drivers/mmc/host
AgeCommit message (Collapse)Author
2012-02-14mmc: dw_mmc: Fix PIO mode with support of highmemSeungwon Jeon
Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [<c0358824>] lr : [<c035988c>] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [<c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<c035988c>] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [<c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<c0359b24>] (dw_mci_interrupt+0xfc/0x4a4) [<c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4) [<c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<c00c48b4>] (handle_irq_event+0x44/0x64) [<c00c4870>] (handle_irq_event+0x0/0x64) from [<c00c7358>] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [<c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<c00c4258>] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [<c00c4228>] (generic_handle_irq+0x0/0x38) from [<c004241c>] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [<c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<c0048bc0>] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-14mmc: atmel-mci: save and restore sdioirq when soft reset is performedLudovic Desroches
Sometimes a software reset is needed. Then some registers are saved and restored but the interrupt mask register is missing. It causes issues with sdio devices whose interrupts are masked after reset. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-14mmc: sh_mmcif: fix late delayed work initialisationGuennadi Liakhovetski
If the driver is loaded with a card in the slot, mmc_add_host() will schedule an immediate card-detection work, which will start IO and wait for command completion. Usually the kernel first returns to the sh_mmcif probe function, lets it finish and only then schedules the rescan work. But sometimes, expecially under heavy system load, the work will be scheduled immediately before returning to the probe method. In this case it is important for the driver to be fully prepared for IO. For sh_mmcif this means, that also the timeout work has to be initialised before calling mmc_add_host(). It is also better to prepare interrupts beforehand. Besides, since mmc_add_host() does card-detection itself, there is no need to do it again immediately afterwards. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-14mmc: tmio_mmc: fix card eject during IO with DMAGuennadi Liakhovetski
When DMA is in use and the card is ejected during IO, DMA transfers have to be terminated, otherwise the dmaengine driver fails to operate properly, when the card is re-inserted. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-14mmc: sdhci-pci: set Medfield SDIO as non-removableAdrian Hunter
Set Medfield SDIO as non-removable to avoid un-necessary card detect activity. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-14mmc: esdhc: set the timeout to the max valueJerry Huang
When accessing the card on some FSL platform boards (e.g p2020, p1010, mpc8536), the following error is reported with the timeout value calculated: mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. So we skip the calculation of timeout and use the max value to fix it. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Gao Guanhua <B22826@freescale.com> Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-14mmc: esdhc: add PIO mode supportJerry Huang
For some FSL ESDHC controllers (e.g. P2020E, Rev1.0), the SDHC can not work on DMA mode because of the hardware bug, so we set a broken dma flag and use PIO mode. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Gao Guanhua <B22826@freescale.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-14mmc: of_mmc_spi: fix little endian supportJean-Christophe PLAGNIOL-VILLARD
The voltage_ranges is supposed to switch from big endian to little endian. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-12mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3Roy Zang
When eSDHC module is enabled on P5020/P3041/P2041/P1010 with eSDHC version 2.3, there is following errors: mmc0: Timeout waiting for hardware interrupt. mmc0: error -110 whilst initialising SD card mmc0: Unexpected interrupt 0x02000000. mmc0: Timeout waiting for hardware interrupt. mmc0: error -110 whilst initialising SD card mmc0: Unexpected interrupt 0x02000000. It is because eSDHC controller has different bit setting for PROCTL register at 0x28 comparing SD specification. This patch sets DMAS bits correctly for byte operation and does not change the default value of other field of PROCTL register. For other FSL chips, such as MPC8536/P2020, PROCTL[DMAS] bits are reserved and even if they are set to wrong bits, it will not take effective. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-25drivers: misc: Remove MISC_DEVICES config optionFabio Estevam
MISC_DEVICES option alone does not select any kernel code and can cause dependency build warnings, such as: warning: (KS8851 && AX88796_93CX6 && RTL8180 && RTL8187 && ADM8211 && RT2400PCI && RT2500PCI && RT61PCI && RT2800PCI && R8187SE) selects EEPROM_93CX6 which has unmet direct dependencies (MISC_DEVICES) As the current drivers/misc/Kconfig stands, it is only possible to select the drivers below if MISC_DEVICES option is selected: source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" So remove MISC_DEVICES option so that nothing is dependant on it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-18Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile
2012-01-14Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds
Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.
2012-01-14Merge tag 'mmc-merge-for-3.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc MMC highlights for 3.3: Core: * Support for the HS200 high-speed eMMC mode. * Support SDIO 3.0 Ultra High Speed cards. * Kill pending block requests immediately if card is removed. * Enable the eMMC feature for locking boot partitions read-only until next power on, exposed via sysfs. Drivers: * Runtime PM support for Intel Medfield SDIO. * Suspend/resume support for sdhci-spear. * sh-mmcif now processes requests asynchronously. * tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (58 commits) mmc: fix a deadlock between system suspend and MMC block IO mmc: sdhci: restore the enabled dma when do reset all mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operation mmc: host: Adds support for eMMC 4.5 HS200 mode mmc: core: HS200 mode support for eMMC 4.5 mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT() mmc: core: Separate the timeout value for cache-ctrl mmc: sdhci-spear: Fix compilation error mmc: sdhci: Deal with failure case in sdhci_suspend_host mmc: dw_mmc: Clear the DDR mode for non-DDR mmc: sd: Fix SDR12 timing regression mmc: sdhci: Fix tuning timer incorrect setting when suspending host mmc: core: Add option to prevent eMMC sleep command mmc: omap_hsmmc: use threaded irq handler for card-detect. mmc: sdhci-pci: enable runtime PM for Medfield SDIO mmc: sdhci: Always pass clock request value zero to set_clock host op mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION mmc: sdhci-pci: get gpio numbers from platform data mmc: sdhci-pci: add platform data mmc: sdhci: prevent card detection activity for non-removable cards ...
2012-01-12module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12mmc: sdhci: restore the enabled dma when do reset allShaohui Xie
If dma is enabled, it'll be cleared when reset all is performed, this can be observed on some platforms, such as P2041 which has a version 2.3 controller, but platform like P4080 which has a version 2.2 controller, does not suffer this, so we will check if the dma is enabled, we should restore it after reset all. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operationJaehoon Chung
In FIFOTH register, the RX_WMark field (bits[27:16]) defaults to FIFO_DEPTH - 1. When reading it, bits[26:16] were being used, so fix it to use the mask 0xfff instead of 0x7ff. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: host: Adds support for eMMC 4.5 HS200 modeGirish K S
This patch adds support for the HS200 mode on the host side. Also enables the tuning feature required when the HS200 mode is selected. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT()Jaehoon Chung
In status register, fifo_count is bit[29:17]. (0x1FFF is correct) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-spear: Fix compilation errorViresh Kumar
With the inclusion of following patch (59b5bc3929b37): "mmc: sdhci: remove "state" argument from sdhci_suspend_host" we get a compilation error for sdhci-spear: drivers/mmc/host/sdhci-spear.c:283:2: error: too many arguments to function ‘sdhci_suspend_host’ This patch fixes this error. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: Deal with failure case in sdhci_suspend_hostAaron Lu
If there are errors happened in sdhci_suspend_host, handle it so that when the function returns with an error, the host's behaviour is the same before this function call, e.g. card detection is enabled and tuning timer is active, etc. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: Clear the DDR mode for non-DDRSeungwon Jeon
UHS_REG should be cleared for non-DDR mode. But currently there is no way to clear DDR mode, if it is already set once. This patch adds clearing DDR mode for non-DDR mode. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sd: Fix SDR12 timing regressionAlexander Elbs
This patch fixes a failure to recognize SD cards reported on a Dell Vostro with O2 Micro SD card reader. Patch 49c468f ("mmc: sd: add support for uhs bus speed mode selection") caused the problem, by setting the SDHCI_CTRL_HISPD flag even for legacy timings. Signed-off-by: Alexander Elbs <alex@segv.de> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: Fix tuning timer incorrect setting when suspending hostAaron Lu
When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: omap_hsmmc: use threaded irq handler for card-detect.NeilBrown
As the card-detect irq handler just schedules work to be done by a thread, we can use request_threaded_irq to do much of the work for us. This means that interrupts which arrive by handle_nested_irq actually work. Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Kishore Kadiyala <kishorek.kadiyala@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-pci: enable runtime PM for Medfield SDIOAdrian Hunter
Runtime PM for SDIO is no longer enabled by default (see 5c7f0e083d2d98ba14ddd10e88f001a0ead4cae4) so it must now be enabled per platform, in this case Medfield uses it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: Always pass clock request value zero to set_clock host opTodd Poynor
To allow the set_clock host op to disable the SDCLK source when not needed, always call the host op when the requested clock speed is zero. Do this even if host->clock already equals zero, because the SDHCI driver may set that value (without calling the host op) to force an update at the next (non-zero-speed) call. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTIONAdrian Hunter
Even if a driver provides separate card detection, an interrupt is still needed to abort mmc requests that are in progress. SDHCI_QUIRK2_OWN_CARD_DETECTION prevents that, so remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-pci: get gpio numbers from platform dataAdrian Hunter
Retrieve the GPIO numbers for hardware reset and card detect from platform data. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-pci: add platform dataAdrian Hunter
Add a means of getting platform data for the SDHCI PCI devices. The data is stored against the slot not the device in order to support multi-slot devices. The data allows platform-specific setup (such as getting GPIO numbers from firmware or setting up wl12xx for SDIO) to be done in platform support files instead of the sdhci-pci driver. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: prevent card detection activity for non-removable cardsAdrian Hunter
Do not enable card detection interrupts for non-removable cards. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci: fix vmmc handlingAdrian Hunter
Presently the vmmc regulator is enabled when the host controller is added and disabled when it is removed. However, the vmmc regulator should be under the control of the upper layers via ->set_ios(). Make it so. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: omap: remove clock rate hard codingBalaji TK
MMC master clock rate can vary for each instance of the MMC controller on the device. Use clk_get_rate instead to get the value. Signed-off-by: Balaji TK <balajitk@ti.com> Reviewed-by: Venkatraman S <svenkatr@ti.com> Tested-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sh_mmcif: remove now superfluous sh_mmcif_host::data memberGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sh_mmcif: process requests asynchronouslyGuennadi Liakhovetski
This patch converts the sh_mmcif MMC host driver to process requests asynchronously instead of waiting in its .request() method for completion. This is achieved by using threaded IRQs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sh_mmcif: cosmetic clean upGuennadi Liakhovetski
This patch doesn't introduce any functional changes, it only simplifies some code fragments, removes superfluous parameters, fixes typos. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sh_mmcif: process error interrupts firstGuennadi Liakhovetski
If an interrupt is coming with both error and data completion status bits set, it has to be handled as an error interrupt, for which error interrupts have to be processed first. The current version of the driver on the contrary doesn't recognise such interrupts as an error event, which leads to data corruption and breaks the error recovery. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: tmio_mmc: Hotplug code regroupingBastian Hecht
This patch regroups the code slightly, adds documentation and allows the rtpm counter of MMC_CAP_NEEDS_POLL devices to reach 0 again. Signed-off-by: Bastian Hecht <hechtb@gmail.com> [g.liakhovetski@gmx.de: restore pm_runtime_get_noresume()] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-s3c: use S3C_SDHCI_CONTROL2 instead of hardcoded offset valueJingoo Han
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: Support predefined mutiple block transfersSeungwon Jeon
This patch adds the support for predefined multiple block r/w. dw_mmc can support MMC_CAP_CMD23 capability. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: Remove unnecessary else clausesChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: Add more capabilities fieldSeungwon Jeon
This patch adds another capabilities field for MMC_CAPS2_XXX. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: dw_mmc: use dev_pm_ops for dw_mmc controllersJaehoon Chung
This patch modifies dw_mmc to use dev_pm_ops. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-pci: simplify error handlingAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-s3c: Add pm_caps into SD/MMC hostSangwook Lee
sdhci-s3c updates pm_caps from platform data for SDIO PM. Signed-off-by: Sangwook Lee <sangwook.lee@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: convert drivers/mmc/host/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/mmc/host/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: Remove redundant spi driver bus initializationLars-Peter Clausen
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_driver_register(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sh_mmcif: simplify clock divisor calculationGuennadi Liakhovetski
Replace ilog2(__rounddown_pow_of_two(x)) with the equivalent but much simpler fls(x) - 1. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1msTony Lin
1ms is enough for hardware to change the clock to stable. 100ms is too long in the tasklet. Signed-off-by: Tony Lin <tony.lin@freescale.com> CC: Xiaobo Xie <X.Xie@freescale.com> CC: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v0.10.2 at 2024-08-09 01:44:02 (GMT)