summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2012-10-11mmc: mxs-mmc: Fix merge issue causing build errorMarek Vasut
The following error appeared due to a merge problem; the patches: fc108d24 "mmc: mxs-mmc: fix deadlock caused by recursion loop" 829c1bf4 "mmc: spi: Pull out parts shared between MMC and SPI" came in through separate branches and cause this build error when combined. drivers/mmc/host/mxs-mmc.c: In function 'mxs_mmc_enable_sdio_irq': drivers/mmc/host/mxs-mmc.c:527:3: error: 'struct mxs_mmc_host' has no member named 'base' drivers/mmc/host/mxs-mmc.c:527:3: error: 'struct mxs_mmc_host' has no member named 'devid' make[3]: *** [drivers/mmc/host/mxs-mmc.o] Error 1 This patch corrects the issue. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-11Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "A series of fixes (and in some cases, some cleanups): Via Tony Lindgren: - A collection of OMAP regression fixes, in particular because firmware no longer sets up all pin states before starting the kernel. - cpufreq fixes for OMAP (Rafael is on vacation and this was pre-agreed). - A longer series of misc regression fixes and cleanups, warning removals, etc for OMAP From Arnd Bergmann: - A series of warning fixes for various platforms (defconfig builds) Misc: - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: pxa: armcore: fix PCI PIO warnings ARM: integrator: use __iomem pointers for MMIO, part 2 ARM: assabet: fix bogus warning in get_assabet_scr (again) ARM: shmobile: mark shmobile_init_late as __init ARM: integrator_cp: fix build failure ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling ARM: OMAP3: fix workaround for EMU clockdomain arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon ARM/dts: omap5-evm: pinmux configuration for audio ARM/dts: Add pinctrl driver entries for omap5 ARM/dts: omap4-panda: pinmux configuration for audio ARM/dts: omap4-sdp: pinmux configuration for audio ARM/dts: omap5-evm: Disable unused McBSP3 ARM/dts: omap4-sdp: Disable unused McBSP3 ARM/dts: omap4-panda: Disable unused audio IPs ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs ...
2012-10-10Merge tag 'mmc-merge-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)" * tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits) mmc: core: Fixup broken suspend and eMMC4.5 power off notify mmc: sdhci-spear: Add clk_{un}prepare() support mmc: sdhci-spear: add device tree bindings mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks mmc: dt: Support "broken-cd" property in sdhci-pltfm mmc: sdhci-s3c: fix the wrong number of max bus clocks mmc: sh-mmcif: avoid oops on spurious interrupts mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ mmc: sdhci-s3c: Fix crash on module insertion for second time mmc: sdhci-s3c: Enable only required bus clock mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration" mmc: mxcmmc: fix bug that may block a data transfer forever mmc: omap_hsmmc: Pass on the suspend failure to the PM core mmc: atmel-mci: AP700x PDC is not connected to MCI mmc: atmel-mci: DMA can be used with other controllers mmc: mmci: use clk_prepare_enable and clk_disable_unprepare mmc: sdhci-s3c: Add device tree support mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ...
2012-10-07mmc: core: Fixup broken suspend and eMMC4.5 power off notifyUlf Hansson
This patch fixes up the broken suspend sequence for eMMC with sleep support. Additionally it reworks the eMMC4.5 Power Off Notification feature so it fits together with the existing sleep feature. The CMD0 based re-initialization of the eMMC at resume is re-introduced to maintain compatiblity for devices using sleep. A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off Notification feature. We might be able to remove this cap later on, if we think that Power Off Notification always is preferred over sleep, even if the host is not able to cut the eMMC VCCQ power. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saugata Das <saugata.das@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-spear: Add clk_{un}prepare() supportViresh Kumar
clk_{un}prepare is mandatory for platforms using common clock framework. Since this driver is used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-spear: add device tree bindingsViresh Kumar
This adds simple DT bindings for SDHCI SPEAr controller. It uses cd-gpios from common mmc bindings. This also fixes spear300-evb.dts with correct name for card detect binding. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resumeChander Kashyap
Perform clock disable/enable in runtime suspend/resume. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulatorChris Ball
Before this patch, we were using MMC_CAP2_BROKEN_VOLTAGE as a way to avoid calling regulator_set_voltage() on a fixed regulator, but that's just duplicating information that already exists -- we should test whether the regulator is fixed directly, instead of via a capability. This patch implements that test. We can't reclaim the capability bit just yet, since there are still boards in arch/arm/ that reference it; those references can be removed now. Reported-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirksChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: dt: Support "broken-cd" property in sdhci-pltfmChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07mmc: sdhci-s3c: fix the wrong number of max bus clocksJaehoon Chung
We can use up to four bus-clocks; but on module remove, we didn't disable the fourth bus clock. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-07ARM: tegra: fix mismerges of header file inclusionsOlof Johansson
Another mishandled merge conflict by me, where the header file renames and the removal of gpio includes clashed and I chose the wrong end result. Fixes build breakage for tegra_defconfig. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-05sections: fix section conflicts in drivers/mmcAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-03mmc: sh-mmcif: avoid oops on spurious interruptsGuennadi Liakhovetski
On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious interrupts without any active request. To prevent the Oops, that results in such cases, don't dereference the mmc request pointer until we make sure, that we are indeed processing such a request. Reported-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQGuennadi Liakhovetski
Upon completion of a MMC_WRITE_MULTIPLE_BLOCK command MMCIF issues an IRQ with the DTRANE bit set and often with one or several of CMD12 bits set. If those interrupts are not acknowledged, an additional interrupt can be produced and will be delivered later, possibly, when the transaction has already been completed. To prevent this from happening, CMD12 completion interrupt sources have to be cleared too upon reception of an DTRANE IRQ. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sdhci-s3c: Fix crash on module insertion for second timeChander Kashyap
If sdhci-s3c driver is built as module, it gives following error if inserted again after removing. This was happening as pm_runtime_use_autosuspend() is called in sdhci_s3c_probe() function but in sdhci_s3c_remove() its complementary pm_runtime_dont_use_autosuspend() is not called. BUG: spinlock bad magic on CPU#1, insmod/955 lock: 0xee771368, .magic: 00000000, .owner: insmod/955, .owner_cpu: 1 [<c00147e0>] (unwind_backtrace+0x0/0xf8) from [<c0136b40>] (do_raw_spin_unlock+0xa4/0xe4) [<c0136b40>] (do_raw_spin_unlock+0xa4/0xe4) from [<c01be508>] (_raw_spin_unlock_irqrestore+0xc/0x38) [<c01be508>] (_raw_spin_unlock_irqrestore+0xc/0x38) from [<c01a9334>] (sdhci_runtime_suspend_host+0x54/0x80) [<c01a9334>] (sdhci_runtime_suspend_host+0x54/0x80) from [<bf0060a8>] (sdhci_s3c_runtime_suspend+0x14/0x38 [sdhci_s3c]) [<bf0060a8>] (sdhci_s3c_runtime_suspend+0x14/0x38 [sdhci_s3c]) from [<c016cb00>] (pm_generic_runtime_suspend+0x2c/0x40) [<c016cb00>] (pm_generic_runtime_suspend+0x2c/0x40) from [<c0170090>] (__rpm_callback+0x70/0x98) [<c0170090>] (__rpm_callback+0x70/0x98) from [<c01703f0>] (rpm_suspend+0xf0/0x534) [<c01703f0>] (rpm_suspend+0xf0/0x534) from [<c0171670>] (__pm_runtime_suspend+0x5c/0x74) [<c0171670>] (__pm_runtime_suspend+0x5c/0x74) from [<c016d018>] (pm_generic_runtime_idle+0x44/0x4c) [<c016d018>] (pm_generic_runtime_idle+0x44/0x4c) from [<c0170090>] (__rpm_callback+0x70/0x98) [<c0170090>] (__rpm_callback+0x70/0x98) from [<c0170984>] (rpm_idle+0xdc/0x18c) [<c0170984>] (rpm_idle+0xdc/0x18c) from [<c0171608>] (pm_runtime_set_autosuspend_delay+0x30/0x3c) [<c0171608>] (pm_runtime_set_autosuspend_delay+0x30/0x3c) from [<bf0069c4>] (sdhci_s3c_probe+0x35c/0x52c [sdhci_s3c]) [<bf0069c4>] (sdhci_s3c_probe+0x35c/0x52c [sdhci_s3c]) from [<c016a014>] (platform_drv_probe+0x18/0x1c) Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sdhci-s3c: Enable only required bus clockChander Kashyap
In case of multiple bus clock sources, all the clock sources were getting enabled. As only one clock source is needed at the time hence enable only the required bus clock. This patch does as follows: 1. In sdhci_s3c_probe enable only required bus clock source. 2. Handle the disabling of old bus clock and enables the best clock selected in sdhci_s3c_set_clock(). Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration"Seungwon Jeon
This reverts commit 94c6cee91 (Add check for IDMAC configuration). Synopsys says that only if internal dmac is not present, optional external dma interface is present. When internal dmac is present, '0' value in DMA_INTERFACE of HCON is reasonable. DMA_INTERFACE indicates external dma interface. And idmac initialization is prohibited now. The commit should be reverted since: the check for IDMAC is not reliable; falling back to PIO would provide awful performance; we wouldn't expect to see instances of this block without DMA support. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: mxcmmc: fix bug that may block a data transfer foreverJavier Martin
The problem can be easily reproduced using a script that loops copying a file in an SD card to another place in the same SD card and its related to read transfers. This only happens with DMA enabled. This is related to the fact that, when reading, an MMC irq signals the fact that all data from the SD card has been copied to the internal buffers. However, it doesn't signal whether the DMA transfer that is in charge of moving data from these internal buffers to RAM has finished or not. Thus, calling dmaengine_terminate_all() in the MMC irq routine can cancel an ongoing DMA transfer leaving some data in the internal buffers that produces an accumulative effect which, in the end, blocks a read data transfer forever. The following patch watches DMA irq for reading and MMC irqs for writing transfers. The 'dangerous' usage of dmaengine_terminate_all() is removed and a timeout of 10 seconds is added so that the MMC won't block forever anymore. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: omap_hsmmc: Pass on the suspend failure to the PM coreVaibhav Bedia
In some cases mmc_suspend_host() is not able to claim the host and proceed with the suspend process. The core returns -EBUSY to the host controller driver. Unfortunately, the host controller driver does not pass on this information to the PM core and hence the system suspend process continues. ret = mmc_suspend_host(host->mmc); if (ret) { host->suspended = 0; if (host->pdata->resume) { ret = host->pdata->resume(dev, host->slot_id); The return status from mmc_suspend_host() is overwritten by return status from host->pdata->resume. So the original return status is lost. In these cases the MMC core gets to an unexpected state during resume and multiple issues related to MMC crop up. 1. Host controller driver starts accessing the device registers before the clocks are enabled which leads to a prefetch abort. 2. A file copy thread which was launched before suspend gets stuck due to the host not being reclaimed during resume. To avoid such problems pass on the -EBUSY status to the PM core from the host controller driver. With this change, MMC core suspend might still fail but it does not end up making the system unusable. Suspend gets aborted and the user can try suspending the system again. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: atmel-mci: AP700x PDC is not connected to MCIHein_Tibosch
Earlier, atmel-mci was adapted to make use of the peripheral DMA controller (PDC), in case normal DMA wouldn't work. ( http://comments.gmane.org/gmane.linux.kernel.mmc/9403 ) This works OK on ARM platforms (AT91), but it broke the driver for AVR32, the AP700x. Although the MCI has PDC support, the connection is not done for AVR chips. This patch makes the use of PDC depend on !CONFIG_AVR32. Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: atmel-mci: DMA can be used with other controllersHein_Tibosch
After the latest changes to atmel-mci, it could not be used with DMA on the AVR32 platform. This patch will allow to use DMA again and it will avoid access to MCI register ATMCI_DMA. Even if the IP version is lower than v3xx and doesn't have the DMA configuration register, DMA transfers can be used with a different controller than the Atmel AHB DMA one. For instance, some AVR chips use the Synopsys DesignWare AHB DMA controller. Signed-off-by: Hein Tibosch <hein_tibosch@yahoo.es> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: mmci: use clk_prepare_enable and clk_disable_unprepareJulia Lawall
clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. They make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: sdhci-s3c: Add device tree supportThomas Abraham
Add device tree based discovery support for Samsung's sdhci controller. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add support for exynos specific implementation of dw-mshcThomas Abraham
Samsung Exynos SoC's extend the dw-mshc controller for additional clock and bus control. Add support for these extensions and include provide device tree based discovery suppory as well. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add support for implementation specific callbacksThomas Abraham
The core dw-mshc controller driver can let platform specific implementations of the dw-mshc controller to control the hardware as required by such implementations. This is acheived by invoking implementation specific (optional) callbacks. Define the list of callbacks supported the add invocation points for the same. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: prepare functions in dw_mmc-pltfm for reuseThomas Abraham
Platform implementations of dw-mshc controller may choose to extend the features of the standard dw-mshc controller such as adding additional clocking options or modifying the bus interface. Support for such implementation specific extensions can be incorporated into dw_mmc-pltfm, but including multiple such platform specific implementations would convolute the existing dw_mmc-pltfm code. Instead, it would be better to create implementation specific platform drivers to support implementation specific features. Such platforms drivers can reuse the existing infrastructure in dw_mmc-pltfm for resource identification and controller registration and provide support for implementation specific features. So, allow the infrastructure in dw_mmc-pltfm to be reused by other implementation specific platform drivers. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add device tree supportThomas Abraham
Add device tree based discovery support. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: add quirk to indicate missing write protect lineThomas Abraham
If the write protect pad of the controller is not connected to the write protect pin of the slot, the driver should be notified of this condition so that incorrect check for write protection by reading the WRTORT register can avoided. The get_ro platform callback can be used for in such cases, but with device tree support enabled, such platform callbacks cannot be supported. Add a new quirk for notifying the driver about the missing write protect line so the driver can assume that the card write protection is disabled. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: lookup for optional biu and ciu clocksThomas Abraham
Some platforms allow for clock gating and control of bus interface unit clock and card interface unit clock. Add support for clock lookup of optional biu and ciu clocks for clock gating and clock speed determination. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: allow probe to succeed even if one slot is initializedThomas Abraham
Instead of aborting the probe when a slot initialization fails, allow initialization of as many slots as possible. If there is at least one instance of a slot that is successfully initialized, allow the driver probe to succeed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: Use devm_* functions in dw_mmc platform driverThomas Abraham
Use devm_* managed functions for simpler error handling. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: dw_mmc: convert copy of struct device in struct dw_mci to a referenceThomas Abraham
The 'struct dw_mci' maintains a copy of the pdev->dev instance instead of maintaining a reference to that 'struct device' instance. Any resource allocated using the device resource management kernel API with the instance of 'struct device' in 'struct dw_mci' is then incorrect. Fix this by converting the copy of 'struct device' in 'struct dw_mci' to a reference. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03mmc: support BKOPS feature for eMMCJaehoon Chung
Enable eMMC background operations (BKOPS) feature. If URGENT_BKOPS is set after a response, note that BKOPS are required. Immediately run BKOPS if required. Read/write operations should be requested during BKOPS(LEVEL-1), then issue HPI to interrupt the ongoing BKOPS and service the foreground operation. (This patch only controls the LEVEL2/3.) When repeating the writing 1GB data, at a certain time, performance is decreased. At that time, card triggers the Level-3 or Level-2. After running bkops, performance is recovered. Future considerations: * Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner. * Interrupt ongoing BKOPS before powering off the card. * How do we get BKOPS_STATUS value (periodically send ext_csd command)? * If using periodic bkops, also consider runtime_pm control. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-03Merge tag 'spi-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi updates from Mark Brown: "No framework work here, only a bunch of driver updates of varying sizes: - Factoring out of the core hardware support from the MXS MMC driver by Marek Vasut to allow the hardware to also be used for SPI. - Lots of error handling cleanups from Guenter Roeck - Removal of the existing Tegra driver which is quite comprehensively broken as detailed in the changelog for the removal. - DT suppport for the PL022 and GPIO drivers. - pinctrl support for OMAP and PL022." Pulling from Mark Brown as Grant Likely is still busy moving. * tag 'spi-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (53 commits) spi: remove completely broken Tegra driver spi/imx: set the inactive state of the clock according to the clock polarity spi/pl022: get/put resources on suspend/resume spi/pl022: use more managed resources spi/pl022: Devicetree support w/o platform data spi/s3c64xx: Don't free controller_data on non-dt platforms spi: omap2-mcspi: add pinctrl support spi/pl022: adopt pinctrl support spi: omap2-mcspi: Cleanup the omap2_mcspi_txrx_dma function spi/gpio: Fix stub for spi_gpio_probe_dt() spi/mxs: Make the SPI block clock speed configurable via DT spi: spi-sh-hspi: drop frees of devm_ alloc'd data spi/pl022: Fix chipselects pointer computation spi: spi-tle62x0: Use module_spi_driver macro mxs/spi: Rework the mxs_ssp_timeout to be more readable mxs/spi: Decrement the DMA/PIO border mxs/spi: Increment the transfer length only if transfer succeeded mxs/spi: Fix issues when doing long continuous transfer spi: spi-gpio: Add DT bindings spi: spi-gpio: store chipselect information in private structure ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-10-02Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-10-01Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-25Merge tag 'v3.6-rc6' into spi-mxsMark Brown
Linux 3.6-rc6 Conflicts (overlap between moving code that accesses registers around and factoring the register access out into a SSP layer): drivers/mmc/host/mxs-mmc.c
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-20ARM: OMAP1: Make plat/mux.h omap1 onlyTony Lindgren
We are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap. Acked-by: Felipe Balbi <balbi@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-usb@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-19ARM: samsung: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
2012-09-19ARM: orion: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the orion include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de>
2012-09-19mmc: sdhci: Test cd-gpio instead of SDHCI presence when probingGuennadi Liakhovetski
Previously to this patch, an SDHCI platform that uses a GPIO for card detection instead of the internal SDHCI_CARD_PRESENT bit on the presence register would fail to detect a new card. Some drivers worked around this in various ways: esdhc-imx defines an IO accessor to fake the presence bit being true, s3c turns on polling (which stops the SDHCI driver from checking the bit) after a card's inserted. But none of this should be necessary; the real fix is to check whether we're using a GPIO and avoid relying on the presence bit if so, as this patch implements. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-19mmc: davinci_mmc: convert to DMA engine APIMatt Porter
Removes use of the DaVinci EDMA private DMA API and replaces it with use of the DMA engine API. Signed-off-by: Matt Porter <mporter@ti.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-19mmc: sdio: Fix PM_SLEEP related build warningsThierry Reding
Power management callbacks defined by SIMPLE_DEV_PM_OPS are only used if the PM_SLEEP Kconfig symbol has been defined. If not, the compiler will complain about them being unused. However, since the callback for this driver doesn't do anything it can just as well be dropped. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-19mmc: core: Remove bounce buffer in mmc_send_cxd_data()Kyungsik Lee
It is expected that Extended CSD register (the size of this register is larger than CID/CSD) will be referenced more frequently as more fields have been added to Extended CSD and it seems that it is not a good option to double the memory used. This patch is intended to avoid the use of bounce buffer for reading Extended CSD register in mmc_send_cxd_data(). It will provide a better performance gain by removing memcpy() overhead for a half KiB and a redundant bounce buffer allocated repeatedly at the cost of providing DMA-capable buffer from upper caller (but on-stack buffer is allowed with no performance gain). Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>