summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2010-10-30Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (82 commits) mtd: fix build error in m25p80.c mtd: Remove redundant mutex from mtd_blkdevs.c MTD: Fix wrong check register_blkdev return value Revert "mtd: cleanup Kconfig dependencies" mtd: cfi_cmdset_0002: make sector erase command variable mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one block2mtd: dubious assignment P4080/mtd: Fix the freescale lbc issue with 36bit mode P4080/eLBC: Make Freescale elbc interrupt common to elbc devices mtd: phram: use KBUILD_MODNAME mtd: OneNAND: S5PC110: Fix double call suspend & resume function mtd: nand: fix MTD_MODE_RAW writes jffs2: use kmemdup mtd: sm_ftl: cosmetic, use bool when possible mtd: r852: remove useless pci powerup/down from suspend/resume routines mtd: blktrans: fix a race vs kthread_stop mtd: blktrans: kill BKL mtd: allow to unload the mtdtrans module if its block devices aren't open ... Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
2010-10-30mtd: fix build error in m25p80.cAndres Salomon
While building an x86 distro kernel, I hit the following: Kernel: arch/x86/boot/bzImage is ready (#7) ERROR: "of_mtd_parse_partitions" [drivers/mtd/devices/m25p80.ko] undefined! of_mtd_parse_partitions is defined with MTD_OF_PARTS, and that's only built on PPC and microblaze. The code in question should be wrapped w/ a stricter #ifdef. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-30mtd: Remove redundant mutex from mtd_blkdevs.cDavid Woodhouse
In commit 2a48fc0ab24241755dc93bfd4f01d68efab47f5a ('block: autoconvert trivial BKL users to private mutex'), Arnd replaced the BKL usage with a mutex. However, Maxim has already provided a better fix in commit 480792b7bf188c29b8d4b10fee65c3a06ec5dbf7 ('mtd: blktrans: kill BKL'), which was simply to remove the BKL without replacing it — since he'd already made it do all necessary locking for itself. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-30Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git Conflicts: drivers/mtd/mtd_blkdevs.c Merge Grant's device-tree bits so that we can apply the subsequent fixes. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-30MTD: Fix wrong check register_blkdev return valueFrank Li
register_blkdev return 1..255 when major = 0. if (ret ) { printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n", tr->name, tr->major, ret); mutex_unlock(&mtd_table_mutex); return ret; } Above code will return fail when register_blkdev return allocated major number. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-29convert get_sb_pseudo() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert get_sb_mtd() users to ->mount()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-26Revert "mtd: cleanup Kconfig dependencies"David Woodhouse
This reverts commit 432dc821c90114f9b0e00f6752a700e937516ade. The individual CFI geometry options were carefully set up to get sane default values if the CFI_ADV_OPTIONS wasn't set, and it wasn't appropriate to move them into an if/endif block. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-26mtd: cfi_cmdset_0002: make sector erase command variableGuillaume LECERF
Some old SST chips use 0x50 as sector erase command, instead of 0x30. Make this value variable to handle such chips. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-26mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chipsGuillaume LECERF
Add support for SST38VF640x chips in CFI mode. Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: yidong zhang <zhangyd6@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-26mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY modeGuillaume LECERF
Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-26mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of ↵Guillaume LECERF
hardcoded one Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-26block2mtd: dubious assignmentNicolas Kaiser
When block2mtd_erase fails, a duplicated assignment instantly changes instr->state from MTD_ERASE_FAILED to MTD_ERASE_DONE. It looks to me like this might not be intended, or is it? Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-By: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-25Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mtd/m25p80: add support to parse the partitions by OF node of/irq: of_irq.c needs to include linux/irq.h of/mips: Cleanup some include directives/files. of/mips: Add device tree support to MIPS of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch of/device: Rework to use common platform_device_alloc() for allocating devices of/xsysace: Fix OF probing on little-endian systems of: use __be32 types for big-endian device tree data of/irq: remove references to NO_IRQ in drivers/of/platform.c of/promtree: add package-to-path support to pdt of/promtree: add of_pdt namespace to pdt code of/promtree: no longer call prom_ functions directly; use an ops structure of/promtree: make drivers/of/pdt.c no longer sparc-only sparc: break out some PROM device-tree building code out into drivers/of of/sparc: convert various prom_* functions to use phandle sparc: stop exporting openprom.h header powerpc, of_serial: Endianness issues setting up the serial ports of: MTD: Fix OF probing on little-endian systems of: GPIO: Fix OF probing on little-endian systems
2010-10-25P4080/mtd: Fix the freescale lbc issue with 36bit modeLan Chunhe-B25806
When system uses 36bit physical address, res.start is 36bit physical address. But the function of in_be32 returns 32bit physical address. Then both of them compared each other is wrong. So by converting the address of res.start into the right format fixes this issue. Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25P4080/eLBC: Make Freescale elbc interrupt common to elbc devicesRoy Zang
Move Freescale elbc interrupt from nand driver to elbc driver. Then all elbc devices can use the interrupt instead of ONLY nand. For former nand driver, it had the two functions: 1. detecting nand flash partitions; 2. registering elbc interrupt. Now, second function is removed to fsl_lbc.c. Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Wood Scott-B07421 <B07421@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: phram: use KBUILD_MODNAMEJoe Perches
Use the more standard #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt No change in output strings. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: OneNAND: S5PC110: Fix double call suspend & resume functionKyungmin Park
The suspend & resume called from mtd core. So no need to call at driver. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: nand: fix MTD_MODE_RAW writesJon Povey
RAW writes were broken by 782ce79a45b3b850b108896fcf7da26754061c8f which introduced a check of ops->ooboffs in nand_do_write_ops(). When writing in RAW mode this is called with an ops struct on the stack of mtdchar.c:mtd_write() which does not initialise ops->ooboffs, so it is garbage and fails this test. This test does not make sense if ops->oobbuf is NULL, which it is in the RAW write path, so include that in the test. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: sm_ftl: cosmetic, use bool when possibleMaxim Levitsky
I didn't know that kernel allows use of that typedef. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: r852: remove useless pci powerup/down from suspend/resume routinesMaxim Levitsky
It turns out that pci core now handles these, so this code is redundant and can even cause bugs Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: blktrans: fix a race vs kthread_stopMaxim Levitsky
There is small race window that could make kthread_stop hang forever. I found that while hacking the IR subsystem. Signed-off-by: Maxim Levitsky <maximlevisky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: blktrans: kill BKLMaxim Levitsky
It not needed, because I already added locking for all fops methods. Signed-off-by: Maxim Levitsky <maximlevisky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: allow to unload the mtdtrans module if its block devices aren't openMaxim Levitsky
Now it once again possible to remove mtdtrans module. You still need to ensure that block devices of that module aren't mounted. This is due to the fact that as long as a block device is open, it still exists, therefore if we were to allow module removal, this block device might became used again. This time in addition to code review, I also made the code pass some torture tests like module reload in a loop + read in a loop + card insert/removal all at same time. The blktrans_open/blktrans_release don't take the mtd table lock because: While device is added (that includes execution of add_mtd_blktrans_dev) the lock is already taken Now suppose the device will never be removed. In this case even if we have changes in mtd table, the entry that we need will stay exactly the same. (Note that we don't look at table at all, just following private pointer of block device). Now suppose that someone tries to remove the mtd device. This will be propagated to trans driver which _ought_ to call del_mtd_blktrans_dev which will take the per device lock, release the mtd device and set trans->mtd = NULL. >From this point on, following opens won't even be able to know anything about that mtd device (which at that point is likely not to exist) Also the same care is taken not to trip over NULL mtd pointer in blktrans_dev_release. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: maps: gpio-addr-flash: fix warnings and make more portableMike Frysinger
As reported on lkml, building this module for HIMEM systems spews warnings about mismatch in pointer types. Further, we need to use ioremap() in order to properly access the flash memory on most systems rather than just doing it directly. Reported-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: Blackfin NFC: fix badblock location with BootROM OOBMike Frysinger
The bbt structure isn't actually used, just the badblockpos. This lets the driver correctly handle badblocks with the different OOB layout with certain sized flashes. Previously, the blocks would all be reported as bad and be completely unusable. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: cfi_cmdset_0002: code cleanupsWolfram Sang
- remove disabled code (hasn't been touched since the beginning of git and should be reimplemented if really needed) - convert remaining c++-comments to plain c-style Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: onenand: fix 4KiB page onenand chip recognitionRoman Tereshonkov
For 4Gib non-DDP chip it does not follow that it is always 4KiB page chip. The number of data buffers is checked and if it is equal to 1 we suppose that it is 4KiB page onenand chip. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25mtd: physmap_of: Loop through all "reg" tuples for mappingStefan Roese
This patch changes the loop over the "reg" tuples to not exit directly upon of_address_to_resource() failure but to continue with the next "reg" tuple instead. This failure could be due to size = 0, which might be passed via the device-tree. This is needed for boards, where a "reg" tuple might have size 0 (of_address_to_resource() returns with EINVAL when size = 0). Example: Fully equipped board: reg = <0 0x00000000 0x00400000 0 0x00400000 0x00400000>; Partially equipped board: reg = <0 0x00000000 0x00400000 0 0x00400000 0x00000000>; This could be the case on boards with runtime detection of multiple NOR flash configurations where the detected flash size is inserted into the dtb in U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: omap2: fix static declaration warningG, Manjunath Kondaiah
This patch fixes sparse warning for static declaration of variable "use_dma" drivers/mtd/nand/omap2.c:114:11: warning: symbol 'use_dma' was not declared. Should it be static? Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: Fix endianness issues from device treeIan Munsie
This patch adds the appropriate conversions to correct the endianness issues in the MTD driver whenever it accesses the device tree (which is always big endian). Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: m25p80.c: Add support for S25FL032P spi-nor flash devices.David Jander
Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nandsim: add module param for BBT handlingSebastian Andrzej Siewior
I used this to check the BBT on flash together with a hack in mtdchar in order to read bad blocks. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: introduce NAND_CREATE_EMPTY_BBTSebastian Andrzej Siewior
it will create an empty BBT table without considering vendor's BBT information. Vendor's information may be unavailable if the NAND controller has a different DATA & OOB layout or this information may be allready purged. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: add support for BBT without OOBSebastian Andrzej Siewior
The first (sixt) byte in the OOB area contains vendor's bad block information. During identification of the NAND chip this information is collected by scanning the complete chip. The option NAND_USE_FLASH_BBT is used to store this information in a sector so we don't have to scan the complete flash. Unfortunately the code stores a marker in order to recognize the BBT in the OOB area. This will fail if the OOB area is completely used for ECC. This patch introduces the option NAND_USE_FLASH_BBT_NO_OOB which has to be used with NAND_USE_FLASH_BBT. It will then store BBT on flash without touching the OOB area. The BBT format on flash remains same except the first page starts with the recognition pattern followed by the version byte. This change was tested in nandsim and it looks good so far :) Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: pull in td into read_bbt()Sebastian Andrzej Siewior
No code change. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand: use ALIGN where possibleSebastian Andrzej Siewior
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: OneNAND: S5PC210 OneNAND supportKyungmin Park
S5PC210 has the same OneNAND controller as S5PC110 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: OneNAND: S5PC110: Implement DMA interrupt methodKyungmin Park
Implement DMA interrupt method. previous time it polls the DMA status. It can reduce the CPU power but decrease the performance a little. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: OneNAND: S5PC110: Fix wrong DMA handling when HIGHMEMKyungmin Park
When use HIGHMEM, dma_map_single doesn't get the proper DMA address. So use the dma_map_page in this case. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: OneNAND: S5PC100: Only S5PC110 use the command map methodKyungmin Park
After S5PC110 use the generic method for OneNAND. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: MLC device check in OneNAND driverRohit Hassan Sathyanarayan
The MLC NAND Flash differs from the SLC NAND flash in functioning and the cell structure. Therefore we are considering it as a different Flash type. Signed-off-by: Rohit H.S <rohit.hs@samsung.com> Signed-off-by: Raghav Gupta <gupta.raghav@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: OneNAND: S5PC110: Add timeout to prevent the endless loopKyungmin Park
There's no case timeout but add it for some H/W problem or wrong codes implementation Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: add init_size hook for NAND driverHuang Shijie
Not all the NAND devices have all the information in additional id bytes. So add a hook in the nand_chip{} is a good method to calculate the right value of oobsize, erasesize and so on. Without the hook,you will get the wrong value, and you have to hack in the ->scan_bbt() to change the wrong value which make the code mess. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: add BLKPG API based repartition supportRoman Tereshonkov
Add support for mtd repartition based on the block device BLKPG interface: BLKPG_ADD_PARTITION - for partition creation; BLKPG_DEL_PARTITION - for partition delete The usage is based on BLKPG ioctl called with struct blkpg_ioctl_arg argument which includes the reference to struct blkpg_partition discribing the partition offset and length. Disadvantage: there is no implementation for mtd flags control. The flags are always borrowed from the master device. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: prepare partition add and del functions for ioctl requestsRoman Tereshonkov
mtd_is_master, mtd_add_partition and mtd_del_partition functions are added to give the possibility of partition manipulation by ioctl request. The old partition add function is modified to fit the dynamic allocation. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: generic FSMC NAND MTD driverLinus Walleij
This is the same driver submitted by ST Micros SPEAr team but generalized and tested on the ST-Ericsson U300. It probably easily works on the NHK8815 too. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: m25p80: Add support for the Winbond W25Q64Thierry Reding
This patch adds support for the Winbond W25Q64 serial flash. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24mtd: nand_base: do not cache pages with uncorrectable ECC errorsArtem Bityutskiy
Currently MTD caches the last read NAND page, even if there was an uncorrectable ECC error. This patch prevents caching in case of uncorrectable ECC errors. The reason is that we want to allow the user to re-read the NAND page several times. In case of unstable bits re-trying may help. Moreover, current behavior is wrong because the first read returns -EBADMSG (correctly) but the second read succeeds and incorrectly returns 0 (because we read from the cache). Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>