summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale/fman
AgeCommit message (Collapse)Author
2015-11-24fmd: move compat_copy_fm_pcd_kg_scheme_spc out of DPAA 11 defMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-11-24fmd: PCD: fix offline port blocked by fragmented IPV6Mandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-11-24fmd: Add support for IPF after HManMandy Lavi
fmd: change cc owners attribute from uint8 to unit16 fmd: change manip owner attribute from uint8 to unit16 fmd: add risc load monitor in sysfs fmd: Fix modification of nodes pointed by HM fmd: add missing fields in pcd_manip_hdr_insrt_ip Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-11-24Merge pull request #69 in SDK/linux-devel from ↵Yin Honghua-R63875
~R27762/linux-devel:add_hm_node_stats to master * commit 'a9d0ea5a4d3b679ae3316c93b455d2ccc993772d': fmd: Render header manip node statistics available in user space
2015-11-18fmd: add ioctl call to retrieve scheme counter - spcMandy Lavi
Based on FM_PCD_KgSchemeGetCounter() function which is already exposed by the API Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-11-16fmd: Render header manip node statistics available in user spaceMarian Chereji
Added a user space interface for the "FM_PCD_ManipGetStatistics" function for retrieving header manipulation nodes statistics (including IP reassembly and fragmentation). Signed-off-by: Marian Chereji <marian.chereji@freescale.com>
2015-11-09fmd: fix compat layer for aging_supportMandy Lavi
This attribute should have been added also to the compat layer while it was implemented in the general layer Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-11-02fmd: fix locks in ModifyKey functionMandy Lavi
Fixing an issue that occurs when there are two root ccnodes and both of them point to the same miss ccnode Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-11-02fmd: support aging in CCMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-10-14fmd: fix policer spelling issuesMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-10-14fmd: Remove FM_PORT_PcdPrsModifyStartOffset routine - not supportedMandy Lavi
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
2015-05-27fmd: fix case label consistencyMandy Lavi
Change-Id: I41397d36e3966e099e53d8d5c35b2fdbd27e2055 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36866 Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-20fmd: fix buffer overflow in dsar sysfs printoutsMandy Lavi
Change-Id: Id5ecb2f85caea934dc3de2b69e538af45316e14f Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36567 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-19fmd: fix licensing conflictsMandy Lavi
Change-Id: Ib662fba72d3ad0e5260bcc36006fa0dd7158b056 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36405 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Nir Erez <nir.erez@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-14fmd: fix ioctl of FM_CtrlMonGetCountersPan Jiafei
Signed-off-by: Pan Jiafei <Jiafei.Pan@freescale.com> Change-Id: If3f1264a02dbc9241b10e6050ff0c55c17170ab1 Reviewed-on: http://git.am.freescale.net:8181/35983 Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-08fmd: fix total-fifo-size related error messagesMandy Lavi
Change-Id: Ibb15bb7b55678030e577c7ec6e0f0980b49e985b Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/36009 Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-08fmd: add replication of relative_storage_profile_id in compat layerMandy Lavi
Change-Id: I408d577d952f3ce9237dce1105ef1e577ad2cc6b Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/35819 Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-05fmd: clear parser start offset for all casesMandy Lavi
Change-Id: I408df80410abae8d39ed73299b4e5df2e76cc8ad Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/35430 Reviewed-by: Liron Himi <Liron.Himi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-05fmd: fix parsing of IPv6 GRE frames on inbound OPMandy Lavi
Change-Id: Ic55d4f698c2d406d524e54f817a07f0810f87e25 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/35329 Reviewed-by: Liron Himi <Liron.Himi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-05-05fmd: rtc: set ClkRatio to 1 for T4 devicesMandy Lavi
Change-Id: I059708174df6e363b3b35102231130c1b9ccbedc Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/35897 Reviewed-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-04-30fmd: Add support for SW parser being run before HW parserMandy Lavi
Change-Id: Ia1830aa7a73fcc081dc6e54ee0599b10747bcd2b Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/35266 Reviewed-by: Liron Himi <Liron.Himi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-04-27fmd: Alter MACsec MFL when the SCI is missing from the SecTAGCamelia Groza
Signed-off-by: Camelia Groza <camelia.groza@freescale.com> Change-Id: I5f8d3dcebad92e14972ef9e48188e7df6642cc0a Reviewed-on: http://git.am.freescale.net:8181/35473 Reviewed-by: Liron Himi <Liron.Himi@freescale.com> Reviewed-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com> Tested-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com> Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
2015-04-23fmd: chage IRAM_SIZE macro to depend on FMan block versionMandy Lavi
Change-Id: Ia3943df8ebeca664c64782b3eb76f26dafde4fd7 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/35431 Reviewed-by: Liron Himi <Liron.Himi@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-04-21fmd: rtc: consider RCW[FM_MAC_RAT] when calcuating rtc ref clockMandy Lavi
Change-Id: I1b8a2966ad45f995e7e6b3cdca7f8ed5e0dd397a Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/35026 Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-04-06fmd: Fix incorrect disabling of macsec cfg ptp registerCamelia Groza
Signed-off-by: Camelia Groza <camelia.groza@freescale.com> Change-Id: I7ae237524eea4a1a7587850152ca88eb74a9807d Reviewed-on: http://git.am.freescale.net:8181/34261 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com>
2015-03-30fmd: Fix build issue in case FSL_FMAN_TEST is selectedCristian Sovaiala
Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Change-Id: Ic80a3f28c92aba18af32416d9216759f819c3e8c Reviewed-on: http://git.am.freescale.net:8181/33687 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com>
2015-03-30fmd: Automatically select FSL_DPAA_HOOKS optionCristian Sovaiala
The hooks in the DPAA Ethernet driver are guarded by a new config option FSL_DPAA_HOOKS therefore select this option when enabling FSL_FMAN_TEST. Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Change-Id: I52a22ae0357f9169741b8ccb17fc669a087cde36 Reviewed-on: http://git.am.freescale.net:8181/33686 Reviewed-by: Madalin-Cristian Bucur <madalin.bucur@freescale.com> Tested-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com>
2015-03-26fmd: Add support for reading BMI counters from USMandy Lavi
Technical Details : Add support for the following BMI counters and make them available to the DPA stats interface in the User Space: e_FM_PORT_COUNTERS_DISCARD_FRAME, /* BMI stat counter */ e_FM_PORT_COUNTERS_RX_BAD_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_WRED_DISCARD, /* BMI OP stat counter */ @Function FM_PORT_GetBmiCounters @Description Read port's BMI stat counters and place them into a designated structure of counters. @Param[in] h_FmPort A handle to a FM Port module. @Param[out] p_BmiStats counters structure Change-Id: I464b5defc29e149252002c911b22e69343e61adf Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/32755 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25Revert "fmd: Add support for reading BMI counters from US"Honghua Yin
This reverts commit 1aa49383a4e16ce0c98c73cf81e1a9b2938e68fc. Change-Id: I67ab8f420b1d0777b8229dd91cba56b1bdc88d27 Reviewed-on: http://git.am.freescale.net:8181/33431 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25fmd: Add support for reading BMI counters from USMandy Lavi
Technical Details : Add support for the following BMI counters and make them available to the DPA stats interface in the User Space: e_FM_PORT_COUNTERS_DISCARD_FRAME, /* BMI stat counter */ e_FM_PORT_COUNTERS_RX_BAD_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /* BMI Rx stat counter */ e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD, /* BMI Rx OP stat counter */ e_FM_PORT_COUNTERS_WRED_DISCARD, /* BMI OP stat counter */ @Function FM_PORT_GetBmiCounters @Description Read port's BMI stat counters and place them into a designated structure of counters. @Param[in] h_FmPort A handle to a FM Port module. @Param[out] p_BmiStats counters structure Change-Id: I464b5defc29e149252002c911b22e69343e61adf Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/32755 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25fmd: add macsec wrapper layer interfaceMandy Lavi
Change-Id: I1498478e96ac52523283e41fd047b1162dad11ba Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/33210 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Camelia Alexandra Groza <camelia.groza@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-25fmd: Base cascading decision on current reparsing optionMandy Lavi
fm_manip.c - Base cascading decision on current reparsing option rather than the next one Change-Id: Ic24a9c4c441337548d8f5a1c6a09d5409276e37a Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/30768 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Eyal Harari <Eyal.Harari@freescale.com> Reviewed-by: Nir Erez <nir.erez@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/33215
2015-03-23fmd: set sgmii_speed if disabled auto-neg for 2.5g sgmiiShengzhou Liu
When disabled auto-neg for 2.5 sgmii, it needs to set MDIO_SGMII_IF_MODE[SGMII_SPEED] to '10'(for gigabit) for 2.5G operation, otherwise large packet loss issue occured. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I21ddecd01aaf1eced8d62a40b737218cf47ca6b4 Reviewed-on: http://git.am.freescale.net:8181/32697 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23fsl/dpa: fixup to support 2.5G SGMIIShengzhou Liu
- correct the location of disabling auto-neg for 2.5G in SetupSgmiiInternalPhy. - add the missing condition e_ENET_MODE_SGMII_2500 in memac_init_phy. - fix sgmii_2500 to sgmii-2500 to match u-boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Change-Id: I3e3481f1a22e0931acaaaf739dccce944e91e76c Reviewed-on: http://git.am.freescale.net:8181/25752 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23fmd: memac: distinguish TX_FIFO_SECTIONS for t1024Mandy Lavi
t1024 requires for its 10g "best effort" port a different value for TX_FIFO_SECTIONS[TX_AVAIL] than other 10g ports in other devices: 0x60 instead of 0x19 Change-Id: I06fa4166fdff7ef39c02ebe4d97807230ae01f3d Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/31540 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-23fmd: create new config flavor for FManV3LMandy Lavi
CONFIG_FMAN_T4240 was eliminated Instead, there are now two flags representing FmanV3: CONFIG_FMAN_V3H for FmanV3H arch and CONFIG_FMAN_V3L for FmanV3L arch. FmanV3H h/w block is integrated in B4860, B4420, T4240, T4160, T2080 etc FmanV3L h/w block is integrated in T1040, T1024, T1020, T1022 etc defconfig files changes: corenet64_fmanv3_smp_defconfig -> corenet64_fmanv3l_smp_defconfig corenet32_fmanv3_smp_defconfig -> corenet32_fmanv3l_smp_defconfig 85xx/e6500rev2_defconfig -> corenet64_fmanv3h_smp_defconfig Change-Id: I9fcfb454bc3bd2d72c5d55c616400a808e181413 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/30539 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20fsl/fman: Use ccflags-y instead of deprecated EXTRA_CFLAGSWang Dongsheng
This allows users to pass in additional compiler flags through the environment variable EXTRA_CFLAGS, e.g. make EXTRA_CFLAGS=-Wno-error Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> CC: Mandy Lavi <mandy.lavi@freescale.com> Change-Id: I73b952f3c3862e6bd96f6b90df110f8f195721d9 Reviewed-on: http://git.am.freescale.net:8181/33154 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20fsl: Use ccflags-y instead of deprecated EXTRA_CFLAGSWang Dongsheng
This allows users to pass in additional compiler flags through the environment variable EXTRA_CFLAGS, e.g. make EXTRA_CFLAGS=-Wno-error Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Change-Id: I36513506ee1671c31bb076e9b73c2e8e2442cf4f Reviewed-on: http://git.am.freescale.net:8181/33146 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20fmd: update FmanV3L constantsMandy Lavi
Change-Id: I8b2b5e146358ab5aa9ce995c458471b4d037310b Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/29110 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jianhua Xie <jianhua.xie@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-20fmd: fix reading fm_port_ipv4_opt to not panicMandy Lavi
Change-Id: Id4166dad03d6e51202caa367de188ff8486fa9dc Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/28750 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17fmd: MACSEC integrationMandy Lavi
This is the MACSEC lower API integration. Change-Id: I3b6f172b323f1e297d6202856524ac059b7745c1 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/19442 Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Tested-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/28484 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Cristian-Constantin Sovaiala <Cristian.Sovaiala@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17fmd: disable auto-neg if ports is SGMII2.5GMandy Lavi
In order to do so it was also required to introduce a new if type for SGMII2.5G Change-Id: Iddbe223d8b716c3ed348c7a8a53bee0c037f04f4 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/23474 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17fmd: Render match table key statistics accessible from user spaceMarian Chereji
The key statistics for match tables are not accessible from user space using fmlib. This update implements the support for the function FM_PCD_MatchTableGetKeyStatistics to be accessible from user space. Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Change-Id: Ibcf40fdcf7a60afc65b2f926c2a1474513ae8950 Reviewed-on: http://git.am.freescale.net:8181/25376 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Mandy Lavi <Mandy.Lavi@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-17fmd: optimize shared schemes used for IPR across multiple portsMandy Lavi
Change-Id: Ifb357bd9b78c06042aa6e9fbb7c50b821f955064 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/32794 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Liron Himi <Liron.Himi@freescale.com> Reviewed-by: Pinghua An <pinghua.an@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-16fmd: Fix "owner" update in remove PCD chain with header manipulationMarian Chereji
When user askes to update a particular CC Node which points to another CC node that contains entries with header manipulation the owner of the header manipulation node is increased. This patch decreases back the owner explicitly, as owner shouldn't be changed in this situation. Signed-off-by: Ella Segal <ella.segal@freescale.com> Reviewed-by: Marian Chereji <marian.chereji@freescale.com> Change-Id: Ibf963791198d47ade1d376ec1bf8902f510b9900 Reviewed-on: http://git.am.freescale.net:8181/30463 Reviewed-by: Marian-Cornel Chereji <marian.chereji@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-03-13Merge remote-tracking branch 'dpaa/dpaa-next'Olivia Yin-R63875
2015-03-09FMD: Reset FManV3L DEFAULT_totalFifoSize to default 156KJianhua Xie
In T1040RMDPAAAP_Rev.C, at page 103, Figure A-38 says that the Reset value of FMan_V3L of BMI Configuration 1 Register (FMBM_CFG1) is 0x026F0000, which implies that FBPS should be 0x26F = 623. So the size of free buffer pool is 624 * 256bytes = 156KB, and 156K = 5*0x6400 + 0xa00 + 2*0x3200 = 5*1G + 1*OH + 2*OP. So it is OK to most cases while keep the default reset value for FMBM_CFG1. Without this vaule, sometimes DPA Eth driver (offline port) and FMD driver might report errors like below while more than 1 offline ports are added in t1040rdb/qds dts. dpa-fman0-oh@2 { compatible = "fsl,dpa-oh"; /* Define frame queues for the OH port*/ /* <OH Rx error, OH Rx default> */ fsl,qman-frame-queues-oh = <0x68 1 0x69 1>; fsl,bman-buffer-pools = <&bp6>; fsl,qman-frame-queues-tx = <0x90 8>; fsl,fman-oh-port = <&fman0_oh2>; }; dpa-fman0-oh@3 { compatible = "fsl,dpa-oh"; fsl,bman-buffer-pools = <&bp6>; /* Define frame queues for the OH port*/ /* <OH Rx error, OH Rx default> */ fsl,qman-frame-queues-oh = <0x52 1 0x53 1>; fsl,fman-oh-port = <&fman0_oh3>; }; /* The following OP is used as inbound OP*/ dpa-fman0-oh@4 { compatible = "fsl,dpa-oh"; fsl,bman-buffer-pools = <&bp6>; /* Define frame queues for the OH port*/ /* <OH Rx error, OH Rx default> */ fsl,qman-frame-queues-oh = <0x54 1 0x55 1>; fsl,fman-oh-port = <&fman0_oh4>; }; DPA offline port reports errors as below: ...... fsl_dpa_proxy: FSL DPAA Proxy initialization driver () fsl_oh: FSL FMan Offline Parsing port driver () fsl_oh dpa-fman0-oh.24: Found OH node handle compatible with fsl,dpa-oh. fsl_oh dpa-fman0-oh.24: Allocating 0 ingress frame queues duples fsl_oh dpa-fman0-oh.24: OH port /soc@ffe000000/fman@400000/port@83000 enabled. fsl_oh dpa-fman0-oh.24: Default egress frame queue: 105 fsl_oh dpa-fman0-oh.24: Default error frame queue: 104 fsl_oh dpa-fman0-oh.24: Initialized queues: fsl_oh dpa-fman0-oh.25: Found OH node handle compatible with fsl,dpa-oh. fsl_oh dpa-fman0-oh.25: Allocating 0 ingress frame queues duples fsl_oh dpa-fman0-oh.25: OH port /soc@ffe000000/fman@400000/port@84000 enabled. fsl_oh dpa-fman0-oh.25: Default egress frame queue: 83 fsl_oh dpa-fman0-oh.25: Default error frame queue: 82 fsl_oh dpa-fman0-oh.25: Initialized queues: fsl_oh dpa-fman0-oh.26: Found OH node handle compatible with fsl,dpa-oh. fsl_oh dpa-fman0-oh.26: Allocating 0 ingress frame queues duples cpu1/1: ! MAJOR FM Error [CPU01, drivers/net/ethernet/freescale/fman/Peripherals/FM/fm.c:2669 FmSetSizeOfFifo]: Resource Is Unavailable; cpu1/1: Requested fifo size and extra size exceed total FIFO size.cpu1/1: cpu1/1: ! MAJOR FM Error [CPU01, drivers/net/ethernet/freescale/fman/Peripherals/FM/fm.c:2060 FmGetSetPortParams]: Resource Is Unavailable; cpu1/1: cpu1/1: cpu1/1: ! MAJOR FM-Port Error [CPU01, drivers/net/ethernet/freescale/fman/Peripherals/FM/Port/fm_port.c:2392 FM_PORT_Init]: Resource Is Unavailable; cpu1/1: cpu1/1: cpu1/1: ! MAJOR FM Error [CPU01, drivers/net/ethernet/freescale/fman/src/wrapper/lnxwrp_fm_port.c:871 InitFmPortDev]: Invalid State; cpu1/1: cpu1/1: cpu1/1: ! CRITICAL FM-Port Error [CPU01, drivers/net/ethernet/freescale/fman/Peripherals/FM/Port/fm_port.c:3174 FM_PORT_Enable]: Invalid State; cpu1/1: cpu1/1: fsl_oh: probe of dpa-fman0-oh.26 failed with error 39 Reviewed-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-by: Jiafei Pan <Jiafei.Pan@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/28233 Reviewed-on: http://git.am.freescale.net:8181/28619 Change-Id: If44ede3d08bd079bef710e12c527101485d1ba29 CC: Jiafei Pan <Jiafei.Pan@freescale.com> Signed-off-by: Jianhua Xie <jianhua.xie@freescale.com>
2015-02-25fmd: export required functionsMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
2014-12-11fmd: compat layer: remove redundant breaksMandy Lavi
Change-Id: Id7aeeb432a397008ac08c87418c68f0ec70413b2 Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com> Reviewed-on: http://git.am.freescale.net:8181/25100 Reviewed-by: Igal Liberman <Igal.Liberman@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11dpaa_eth: fix PTPd 1588 stack sync issueYangbo Lu
It existed a settime issue for 1588 timer module on some platforms' 32-bit kernels. It's caused by the difference of data type length between 32-bit and 64-bit platforms or kernels. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Change-Id: Ia223770de71fd30d08c6dab5d58bec62719e4a32 Reviewed-on: http://git.am.freescale.net:8181/24537 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Xiaobo Xie <X.Xie@freescale.com> Reviewed-by: Richard Schmitt <richard.schmitt@freescale.com>
generated by cgit v0.10.2 at 2024-06-03 01:01:12 (GMT)