summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/renesas
AgeCommit message (Collapse)Author
2013-05-28net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-16drivers/net/ethernet/renesas: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30sh_eth: use random MAC address if no valid one suppliedSergei Shtylyov
On Renesas R-Car based development boards, although a MAC address is printed on all the Ethernet port labels, U-Boot doesn't write a valid MAC address to the Ether MAHR/MALR registers (there's no storage provided for the Ether MAC address either), so we have to resort to using a random MAC address... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29sh_eth: add R8A77781 supportSergei Shtylyov
Add support for another ARM member of the R-Car family, R-Car M1A, also known as R8A77781 -- it will share the code with previously added R8A77790. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31sh_eth: make 'link' field of 'struct sh_eth_private' *int*Sergei Shtylyov
The 'link' field of 'struct sh_eth_private' has type 'enum phy_state' while the 'link' field of 'struct phy_device' is merely *int* (having values 0 and 1) and the former field gets assigned from the latter. Make the field match, getting rid of incorrectly used PHY_DOWN value in assignments/comparisons. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31sh_eth: workaround for spurious ECI interruptSergei Shtylyov
At least on Renesas R8A7778, EESR.ECI interrupt seems to fire regardless of its mask in EESIPR register. I can 100% reproduce it with the following scenario: target is booted with 'ip=on' option, and so IP-Config opens SoC Ether device but doesn't get a proper reply and then succeeds with on-board SMC chip; then I login and try to bring up the SoC Ether device with 'ifconfig', and I get an ECI interrupt once request_irq() is called by sh_eth_open() (while interrupt mask in EESIPR register is all 0), if that interrupt is accompanied by a pending EESR.FRC (frame receive completion) interrupt, I get kernel oops in sh_eth_rx() because sh_eth_ring_init() hasn't been called yet! The solution I worked out is the following: in sh_eth_interrupt(), mask the interrupt status from EESR register with the interrupt mask from EESIPR register in order not to handle the disabled interrupts -- but forcing EESIPR.M_ECI bit in this mask set because we always need to fully handle EESR.ECI interrupt in sh_eth_error() in order to quench it (as it doesn't get cleared by just writing 1 to the this bit as all the other interrupts). While at it, remove unneeded initializer for 'intr_status' variable and give it *unsigned long* type, matching the type of sh_eth_read()'s result; fix comment. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Max Filippov <max.filippov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31sh_eth: fix handling of no LINK signalSergei Shtylyov
The code handling the absent LINK signal (or the absent PSR register -- which reflects the state of this signal) is quite naive and has probably never really worked. It's probably enough to say that this code is executed only on the LINK change interrupt (sic!) but even if we actually have the signal and choose to ignore it (it might be connected to PHY's link/activity LED output as on the Renesas BOCK-W board), sh_eth_adjust_link() on which this code relies to update 'mdp->link' gets executed later than the LINK change interrupt where it is checked, and so RX/TX never get enabled via ECMR register. So, ignore the LINK changed interrupt iff LINK signal is absent (or just chosen not to be used) or PSR register is absent, and enable/disable RX/TX directly in sh_eth_adjust_link() in this case. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29sh_eth: add R-Car support for realSergei Shtylyov
Commit d0418bb7123f44b23d69ac349eec7daf9103472f (net: sh_eth: Add eth support for R8A7779 device) was a failed attempt to add support for one of members of the R-Car SoC family. That's for three reasons: it treated R8A7779 the same as SH7724 except including quite dirty hack adding ECMR_ELB bit to the mask in sh_eth_set_rate() while not removing ECMR_RTM bit (despite it's reserved in R-Car Ether), and it didn't add a new register offset array despite the closest SH_ETH_REG_FAST_SH4 mapping differs by 0x200 to the offsets all the R-Car Ether registers have, and also some of the registers in this old mapping don't exist on R-Car Ether (due to this, SH7724's 'sh_eth_my_cpu_data' structure is not adequeate for R-Car too). Fix all these shortcomings, restoring the SH7724 related section to its pristine state... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-29sh_eth: move data from header file to driverSergei Shtylyov
The driver's header file contains initialized register offset tables which (as any data definitions), of course, have no business being there. Move them to the driver's body, somewhat beautifying the initializers, while at it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: fix unused variable warningSergei Shtylyov
Commit d5e07e69218fd9aa21d6c8c5ccc629d92bdb9b0f (sh_eth: use managed device API) has caused this warning (due to my overlook): drivers/net/ethernet/renesas/sh_eth.c: In function `sh_eth_drv_remove': drivers/net/ethernet/renesas/sh_eth.c:2482:25: warning: unused variable `mdp' [-Wunused-variable] Kill the darn variable now... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: use managed device APISergei Shtylyov
Switch the driver to the managed device API by replacing ioremap() calls with devm_ioremap_resource() (that will also result in calling request_mem_region() which the driver forgot to do until now) and k[mz]alloc() with devm_kzalloc() -- this permits to simplify driver's probe()/remove() method cleanup. We can now remove the ioremap() error messages since the error messages are printed by devm_ioremap_resource() itself. We can also remove the 'bitbang' field from 'struct sh_eth_private' as we don't need it anymore in order to free the memory behind it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: kill unneeded typecast in sh_eth_drv_probe()Sergei Shtylyov
sh_eth_drv_probe() does cast from 'void *' when assigning to the 'pd' variable which is automatic anyway. Turn the assignment into initializer, while removing the cast... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21sh_eth: use PIR_* bitsSergei Shtylyov
sh_mdio_init() uses the bare numbers instead of the PHY interface bits, despite these are declared in sh_eth.h as 'enum PIR_BIT'... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-21net: sh-eth: Use pr_err instead of printkNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20sh_eth: check TSU registers ioremap() errorSergei Shtylyov
One must check the result of ioremap() -- in this case it prevents potential kernel oops when initializing TSU registers further on... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20sh_eth: fix bitbang memory leakSergei Shtylyov
sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally, so that sh_mdio_release() can't free it on driver unload. Add the pointer to 'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save 'bitbang' variable for sh_mdio_release() to be able to free it later... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03net: sh_eth: Fix a typo - replace regist with register.YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-07drivers/net/ethernet/renesas/sh_eth.c: fix error return codePeter Senna Tschudin
The function sh_eth_drv_probe() return 0 for success and negative value for most of its internal tests failures. There is one exception that is error case going to out_release:. For this error case, the function abort its success execution path, but returns non negative value, making it difficult for a caller function to notice the error. This patch fixes the error case that do not return negative value. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20net: sh_eth: Add eth support for R8A7779 devicePhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: add support for set_ringparam/get_ringparamYoshihiro Shimoda
This patch supports the ethtool's set_ringparam() and get_ringparam(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: fix up the buffer pointersYoshihiro Shimoda
After freeing the buffer, the driver should change the value of the pointer to NULL. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: remove unnecessary members/definitionsYoshihiro Shimoda
This patch removes unnecessary members in sh_th_private. This patch also removes unnecessary definitions in sh_eth.h Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: remove unnecessary functionYoshihiro Shimoda
The sh_eth_timer() called mod_timer() for itself. So, this patch removes the function. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26net/sh-eth: Check return value of sh_eth_reset when chip reset failNobuhiro Iwamatsu
The sh_eth_reset function resets chip, but this performs nothing when failed. This changes sh_eth_reset return an error, when this failed in reset. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26net/sh-eth: Add support selecting MII function for SH7734 and R8A7740Nobuhiro Iwamatsu
Ethernet IP of SH7734 and R8A7740 has selecting MII register. The user needs to change a value according to MII to be used. This adds the function to change the value of this register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-23net: sh_eth: fix the condition to fix the cur_tx/dirty_rxYoshihiro Shimoda
The following commit couldn't work if the RMCR is not set to 1. "net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens" commit id 79fba9f51755c704c0a7d7b7f0df10874dc0a744 If RMCR is not set, the controller will clear the EDRRR after it received a frame. In this case, the driver doesn't need to fix the value of cur_rx/dirty_rx. The driver only needs it when the controll detects receive descriptors are empty. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29net: sh_eth: fix the rxdesc pointer when rx descriptor empty happensYoshihiro Shimoda
When Receive Descriptor Empty happens, rxdesc pointer of the driver and actual next descriptor of the controller may be mismatch. This patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-05net: sh_eth: add support R8A7740Yoshihiro Shimoda
The R8A7740 has a Gigabit Ethernet MAC. This patch supports it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02net: sh_eth: fix endian check for architecture independentYoshihiro Shimoda
SuperH has the "CONFIG_CPU_LITTLE_ENDIAN" and the "__LITTLE_ENDIAN__". But, other architecture doesn't have them. So, this patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-28net: sh_eth: Add support SH7734Nobuhiro Iwamatsu
Add define of SH7734 register and sh_eth_reset_hw_crc function. V3: Rebase net/HEAD. V2: Do not split line of #if defined. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: sh_eth: add support for VLAN tag filteringYoshihiro Shimoda
Some controllers have TSU. It can register one VLAN tag, and it can filter other VLAN tag by hardware. If vlan_rx_add_vid() is called twice or more, the driver will disable the filtering. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: sh_eth: add support for multicast filteringYoshihiro Shimoda
Some controllers have TSU. It can filter multicast by hardware. This patch supports it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: sh_eth: modify a condition of ioremap for TSUYoshihiro Shimoda
If the controller has TSU, the each channel needs TSU registers. This patch also fixes the iounmap condition in the sh_eth_drv_remove(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: sh_eth: change the condition of initializationYoshihiro Shimoda
The SH7757 has 2 Fast Ethernet and 2 Gigabit Ethernet, and the first Gigabit channel needs the initialization. So, this patch adds the parameter of "needs_init", and if the sh_eth_plat_data is set it to 1, the driver will initialize the channel. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: sh_eth: add the value of tsu to the SH7757's GETHERYoshihiro Shimoda
The SH7757's GETHER has TSU registers. So, this patch adds the value of ".tsu = 1" in the sh_eth_cpu_data. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15renesas/sh_eth.c: fix linux/interrupt.h included twiceDanny Kukawka
Remove double include of linux/interrupt.h. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-11Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/infiniband/hw/nes/nes_cm.c Simple whitespace conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A. Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-07sh-eth: use netdev stats structure and fix dma_map_singleEric Dumazet
No need to maintain a parallel net_device_stats structure in sh_eth_private, since we have a generic one in netdev Fix two dma_map_single() incorrect parameters, passing skb->tail instead of skb->data. Seems that there is no corresponding dmap_unmap_single() calls for the moment in this driver. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-07net: sh_eth: fix skb_over_panic happenYoshihiro Shimoda
When this GETHER controller received a large frame (about 1800 bytes or more), skb_over_panic() happened. This is because the previous driver set the RFLR to 0x1000 (4096 bytes) and the skb allocate size is smaller than 4096 bytes. So, the controller accepted such a frame. The controller can discard a large frame by the RFLR setting. So, the patch modifies the value of RFLR to mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17net: sh-eth: Fix build error by the value which is not definedNobuhiro Iwamatsu
----- drivers/net/ethernet/renesas/sh_eth.c:1706: error: 'pdid' undeclared (first use in this function) drivers/net/ethernet/renesas/sh_eth.c:1706: error: (Each undeclared identifier is reported only once drivers/net/ethernet/renesas/sh_eth.c:1706: error: for each function it appears in.) make[5]: *** [drivers/net/ethernet/renesas/sh_eth.o] Error 1 ----- Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-17 21:39:07 (GMT)