summaryrefslogtreecommitdiff
path: root/drivers/net/jme.c
AgeCommit message (Collapse)Author
2010-12-21drivers/net/*.c: Use static constJoe Perches
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-06net: Fix too optimistic NETIF_F_HW_CSUM featuresMichał Mirosław
NETIF_F_HW_CSUM is a superset of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM, but some drivers miss the difference. Fix this and also fix UFO dependency on checksumming offload as it makes the same mistake in assumptions. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31jme: fix panic on loadEric Dumazet
Its now illegal to call netif_stop_queue() before register_netdev() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-24jme: Support WoL after shutdownGuo-Fu Tseng
Adding shutdown function that setup wake if wol is enabled. Add jme_phy_on in jme_set_100m_half in case it is shutting down or suspending when interface is down(phy_off by default). v2 updates: Removed CONFIG_PM ifdef for jme_set_100m_half and jme_wait_link. It would be nice if it can be applied to net-2.6 along with other patches sent few days ago. If it is not appropriate, please ignore the net-2.6 request, and apply it to net-next-2.6 as previous patch. :) Reported-and-helped-by: Сtac <Taoga@yandex.ru> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Advance version numberGuo-Fu Tseng
Advance version number and update copyright info Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Adding mii-tool supportGuo-Fu Tseng
Adding mii-tool support for some distribution only have mii-tool installed by default. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Prevent possible read re-order errorGuo-Fu Tseng
Adding read memory barrier in between flag reading and data reading of receive descriptors. This prevents the data being read before hardware complete writing informations. Reported-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Add comment in jme_set_settingsGuo-Fu Tseng
Explains what `fdc` variable is for. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21jme: Fix PHY power-off errorGuo-Fu Tseng
Adding phy_on in opposition to phy_off. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: <stable@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07drivers/net/jme: Use pr_<level>Joe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert jeprintk to pr_err Remove jeprintk macro define Remove periods from end of logging messages Coalesce format strings Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03drivers/net: avoid some skb->ip_summed initializationsEric Dumazet
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18drivers/net: remove useless semicolonsJoe Perches
switch and while statements don't need semicolons at end of statement [ Fixup minor conflicts with recent wimax merge... -DaveM ] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-04-03net: convert multicast list to list_headJiri Pirko
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-19jme: Protect vlgrp structure by pause RX actions.Guo-Fu Tseng
Temporary stop the RX IRQ, and disable (sync) tasklet or napi. And restore it after finished the vlgrp pointer assignment. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19jme: Fix VLAN memory leakGuo-Fu Tseng
Fix memory leak while receiving 8021q tagged packet which is not registered by user. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: convert multiple drivers to use netdev_for_each_mc_addr, part5 V2Jiri Pirko
removed some needless checks and also corrected bug in lp486e (dmi was passed instead of dmi->dmi_addr) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12drivers/net/jme: Use netif_printk helpersJoe Perches
Convert uses of msg_<type> to netif_<level>( Remove msg_<type> macros Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-08drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-19drivers/net: tasklet_init - Remove unnecessary leading & from second argJoe Perches
Changed function pointer use from non-majority address-of style to majority short form without & via: (was: 8 with &, 36 without) grep -rPl "\btasklet_init\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\btasklet_init\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Compile tested allyesconfig x86 Signed-off-by: Joe Perches <joe@perches.com> drivers/net/cnic.c | 4 ++-- drivers/net/jme.c | 10 +++++----- drivers/net/skge.c | 2 +- 3 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06jme: Tuning rxsum functionGuo-Fu Tseng
1. Use more efficient way to determine flag status. 2. Hardware dose not mark fragment bit against IPv6 packets, print TCP/UDP checksum warning message for IPv4 packets only. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06jme: Remove shadow register supportGuo-Fu Tseng
The hardware failed to update the shadow register in several cases. It's known to be failed at 64bit box with more than 4G RAM. In order to make the device working stable, give up using the shadow register feature. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06jme: Change bufinf memory locationGuo-Fu Tseng
Instead of using a large chunk of memory space preserved for for modules, using kmalloc to obtain the needed memory. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06jme: Fix unmatched tasklet_{enable|disable} pairGuo-Fu Tseng
Fix faulty tasklet function usage. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06jme: Some minor coding style consistency modificationsGuo-Fu Tseng
Making coding style more consistent. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29net: dont update dev->trans_startEric Dumazet
Second round of drivers for Gb cards (and NIU one I forgot in the 10GB round) Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-13Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)Yang Hongyang
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/tokenring/tmspci.c drivers/net/ucc_geth_mii.c
2009-03-04net: more timeouts that reach -1Roel Kluin
with while (timeout-- > 0); timeout reaches -1 after the loop, so the tests below are off by one. also don't do an '< 0' test on an unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02jme: Adding {64,40}bits DMA mask backGuo-Fu Tseng
All JMC250 chips have no problem with higher bits support. Adding it back. Found-by: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02jme: Clear all modified GHC register flagsGuo-Fu Tseng
Clear all modified GHC register flags. Fixed-by: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02jme: Fix pci syncGuo-Fu Tseng
We should sync ring descriptor to pci device after modifying it. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02jme: Modifies messages to display correct hardware versionGuo-Fu Tseng
This patch modifies messages to display correct hardware version. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-23net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04jme: Remove 64 and 40 bit dma_maskGuo-Fu Tseng
Although the hardware supports the 64bit DMA address in design, but later found that it actually not working. This patch reduced the rang to 32bit. Found-by: "Ethan" <ethanhsiao@jmicron.com> Signed-off-by: "Guo-Fu Tseng" <cooldavid@cooldavid.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04jme: GHC register control fix for new hardwareakeemting
Due to the hardware design, except the first chip on the market, other chips needs to setup the clock source for MAC processor implicitly through Global Host Control Register(GHC). (Strange design huh?) 10/100M uses the PCI-E as clock source, and 1G uses GPHY. And I reordered the code a little, to make it easier to read. Found-by: "Ethan" <ethanhsiao@jmicron.com> Fixed-by: "akeemting" <akeem@jmicron.com> Signed-off-by: "Guo-Fu Tseng" <cooldavid@cooldavid.org> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-22jme: convert driver to net_device_opsStephen Hemminger
Convert driver to new net_device_ops. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ixgbe/ixgbe_main.c include/net/mac80211.h net/phonet/af_phonet.c
2008-11-19net: jme.c rxdesc.flags is __le16, other missing endian swapsHarvey Harrison
This is the minimal patch to fix endian mismatches. These are probably bugs on big-endian arches, noops on little endian. jme_rxsum_ok could be improved to directly take a __le16 and change all of the masks/sets to be in little-endian, but has not been done here to keep the patch small. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-04drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-28net: convert more to %pMJohannes Berg
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-14net: fix driver build errors due to missing net/ip6_checksum.h includeKamalesh Babulal
2.6.27-git2 kernel build fails with allyesconfig on powerpc with build error <introduced by commit 01f2e4ead2c51226ed1283ef6a8388ca6f4cff8f> CC drivers/net/enic/enic_main.o drivers/net/enic/enic_main.c: In function ‘enic_queue_wq_skb_tso’: drivers/net/enic/enic_main.c:576: error: implicit declaration of function ‘csum_ipv6_magic’ make[3]: *** [drivers/net/enic/enic_main.o] Error 1 <introduced by commit c4e84bde1d595d857d3c74b49b9c45cc770df792> drivers/net/qlge/qlge_main.c: In function ‘ql_tso’: drivers/net/qlge/qlge_main.c:1862: error: implicit declaration of function ‘csum_ipv6_magic’ make[3]: *** [drivers/net/qlge/qlge_main.o] Error 1 <introduced by commit 95252236e73e789dd186ce796a2abc60b3a61ebe> drivers/net/jme.c: In function ‘jme_tx_tso’: drivers/net/jme.c:1784: error: implicit declaration of function ‘csum_ipv6_magic’ make[2]: *** [drivers/net/jme.o] Error 1 Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-13jme: remove unused #include <version.h>Huang Weiyi
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/jme.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09jme: Fix warnings with CONFIG_PM disabled.David S. Miller
drivers/net/jme.c:1598: warning: ‘jme_set_100m_half’ defined but not used drivers/net/jme.c:1618: warning: ‘jme_wait_link’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>