summaryrefslogtreecommitdiff
path: root/drivers/net/qlcnic
AgeCommit message (Collapse)Author
2011-05-13qlcnic: Bumped up version number to 5.0.18Anirban Chakraborty
Update driver version number Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: Take FW dump via ethtoolAnirban Chakraborty
Driver checks if the previous dump has been cleared before taking the dump. It doesn't take the dump if it is not cleared. Changes from v2: Added lock to protect dump data structures from being mangled while dumping or setting them via ethtool. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: FW dump supportAnirban Chakraborty
Added code to take FW dump. o Driver queries FW at the init time and gets the dump template o It takes FW dump as per the dump template o Level of FW dump (and its size) is configured via dump flag Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29qlcnic: Support for GBE port settingsSony Chacko
Enable setting speed and auto negotiation parameters for GbE ports. Hardware do not support half duplex setting currently. o Update driver version to 5.0.17. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29qlcnic: support rcv ring configuration through ethtoolSucheta Chakraborty
o Support ethtool command ETHTOOL_GCHANNELS and ETHTOOL_SCHANNELS. o Number of rcv rings configuration depend upon number of msix vector. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28qlcnic: fix memory leak in qlcnic_blink_led.Sucheta Chakraborty
o Memory allocated in ETHTOOL_ACTIVE mode, is not getting freed. So, in ETHTOOL_ID_INACTIVE mode, return after freeing allocated memory. o Using set bit instead of blink_down field, as it is also required in internal Loopback test and etc. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net: qlcnic: convert to hw_featuresMichał Mirosław
Bit more than minimal conversion. There might be some issues because of qlcnic_set_netdev_features() if it's called after netdev init. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_ethtool.c
2011-04-13qlcnic: limit skb frags for non tso packetAmit Kumar Salecha
Machines are getting deadlock in four node cluster environment. All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null) 200 GB storage on a GFS2 filesystem. This result in memory fragmentation and driver receives 18 frags for 1448 byte packets. For non tso packet, fw drops the tx request, if it has >14 frags. Fixing it by pulling extra frags. Cc: stable@kernel.org Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: convert to set_phys_idstephen hemminger
Convert driver to use new ethtool set_phys_id. Not completely sure that this is correct for all cases of device up/down and doing operation. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Update version number to 5.0.16Anirban Chakraborty
Bumped up version number to 5.0.16 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Fix LRO disableRajesh Borundia
o In dev->open LRO was enabled by default, enable it depending upon netdev->features , kernel may have disabled it. o Configure LRO when interface is up. Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <Anirban.Chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Use flt method to determine flash fw regionSritej Velaga
Use flash layout table to get flash fw starting address and its size. If that fails, use legacy method. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Remove unused codeAnirban Chakraborty
Cleaned up unused codes for interrupt coalescence settings Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Changes to VLAN codeAnirban Chakraborty
Made changes to VLAN code comply with new VLAN infrastructure in kernel Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Code optimization patchAnirban Chakraborty
Optimized code resulted in achieving lower CPU utilization on transmit path and higher throughput for small packet sizes (64 bytes). Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Cleanup patchAnirban Chakraborty
1. Changed adapter structure to move away from embedding hardware and receive context structs and use pointers to those objects 2. Packed all the structs that interface with FW 3. Removed unused code and structs Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Memory leak fixSony Chacko
Fix a memory leak in error path of pci info. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Make PCI info available in all modesSony Chacko
Before this fix, PCI info was available only when multiple NIC functions are present on the same port. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-28net: fix ethtool->set_flags not intended -EINVAL return valueStanislaw Gruszka
After commit d5dbda23804156ae6f35025ade5307a49d1db6d7 "ethtool: Add support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX, and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan acceleration via ethtool set_flags, always return -EINVAL from that function. Fix by returning -EINVAL only if requested features do not match current settings and can not be changed by driver. Change any driver that define ethtool->set_flags to use ethtool_invalid_flags() to avoid similar problems in the future (also on drivers that do not have the problem). Tested with modified (to reproduce this bug) myri10ge driver. Cc: stable@kernel.org # 2.6.37+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23qlcnic: Remove validation for max tx and max rx queuesRajesh Borundia
Max rx queues and tx queues are governed by fimware. So driver should not validate these values. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23qlcnic: fix checks for auto_fw_resetamit salecha
o Remove checks of 1 for auto_fw_reset module parameter. auto_fw_reset is of type int and can have value > 1. o Remove unnecessary #define for 1 Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: change module parameter permissionsamit salecha
o Updating module parameter after driver load is not supported except auto_fw_reset parameter. Changing these parameter after driver load, can have weird result. o Update driver version to 5.0.15. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: fix ethtool diagnostics testSony Chacko
IRQ diag test was getting executed only when both register test and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE flag is set. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10qlcnic: fix flash fw version readamit salecha
Driver is reading flash fw version from defined address, this address may be invalid. Indeed Driver should read address for fw version through flash layout table. Flash layout table has defined region and address for fw version address should be read from fw image region. Driver has check for old firmware, this bug can cause driver load fail. This patch will try to read fw version from flash image region, if that fails, read from defined address. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21drivers/net/*/: Use static constJoe Perches
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-17qlcnic: reset pci function unconditionally during probeRajesh Borundia
Some boot code drivers dont have cleanup routine, so pci function remains in unknown state prior to driver load. So during driver load issue FLR unconditionally. Update driver version to 5.0.14. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17qlcnic: fix ocm window register offset calculationRajesh Borundia
OCM window register offset was calculated incorrectly for pci function greater than zero. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17qlcnic: fix LED test when interface is down.Sucheta Chakraborty
When interface is down, create temporary context to config LED. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03qlcnic: Updated driver version to 5.0.13Anirban Chakraborty
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03qlcnic: LICENSE file for qlcnicSritej Velaga
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03qlcnic: validate eswitch config values for PFAmit Kumar Salecha
Currently driver set default eswitch configuration values for PF function, instead of validating values sent by application. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03qlcnic: Disable loopback supportSucheta Chakraborty
Loopback mode can not be supported in CNA mode. Removing it until FW is fixed. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-29qlcnic: remove unnecessary [kv][mcz]alloc castsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28qlcnic: avoid using reset_devices as it may become obsolete.Rajesh Borundia
In kdump environment do not depend upon reset_devices parameter to reset the pci function as this parameter may become obsolete. Instead use an adapter specific mechanism to determine if the pci function needs to be reset. Per function refcount is maintained in driver, which is set in probe and reset in remove handler of adapter. If the probe detects the count as non zero then reset the function. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28drivers/net: use vzalloc()Eric Dumazet
Use vzalloc() and vzalloc_node() in net drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Bumped up driver version to 5.0.12Anirban Chakraborty
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: lro off message log from set rx checsumSony Chacko
Log LRO off message while disabling rx checksum only when LRO is already enabled. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Add description for CN1000Q adapterSritej Velaga
Add description for CN1000Q adapter Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Fix for kdumpRajesh Borundia
In case of kdump environment the function may be in unknown state. Reset the function using PCI FLR before initializing it. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17qlcnic: Allow minimum bandwidth of zeroSucheta Chakraborty
Allow minimum bandwidth to be set zero Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31qlcnic: fix panic on loadEric Dumazet
Its now illegal to call netif_stop_queue() before register_netdev() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27qlcnic: define valid vlan id rangeSony Chacko
4095 vlan id is reserved and should not be use. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27qlcnic: reduce rx ring sizeSony Chacko
If eswitch is enabled, rcv ring size can be reduce, as physical port is partition-ed. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27qlcnic: fix mac learningamit salecha
In failover bonding case, same mac address can be programmed on other slave function. Fw will delete old entry (original func) associated with that mac address. Need to reporgram mac address, if failover again happen to original function. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18qlcnic: update ethtool statsamit salecha
Added statistics for Nic Partition supported adapter. These statistics are maintined in device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: update driver version 5.0.11Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08qlcnic: change all P3 references to P3PSritej Velaga
This patch just rename all P3 #define to P3P. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-07-27 01:58:41 (GMT)