summaryrefslogtreecommitdiff
path: root/drivers/net/usb/cdc_ether.c
AgeCommit message (Collapse)Author
2011-05-10net/usb: mark LG VL600 LTE modem ethernet interface as WWANDan Williams
Like other mobile broadband device ethernet interfaces, mark the LG VL600 with the 'wwan' devtype so userspace knows it needs additional configuration via the AT port before the interface can be used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29usbnet: add support for some Huawei modems with cdc-ether portsDan Williams
Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether compatible ports, so recognize and expose them. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-02usbnet: use eth%d name for known ethernet devicesArnd Bergmann
The documentation for the USB ethernet devices suggests that only some devices are supposed to use usb0 as the network interface name instead of eth0. The logic used there, and documented in Kconfig for CDC is that eth0 will be used when the mac address is a globally assigned one, but usb0 is used for the locally managed range that is typically used on point-to-point links. Unfortunately, this has caused a lot of pain on the smsc95xx device that is used on the popular pandaboard without an EEPROM to store the MAC address, which causes the driver to call random_ether_address(). Obviously, there should be a proper MAC addressed assigned to the device, and discussions are ongoing about how to solve this, but this patch at least makes sure that the default interface naming gets a little saner and matches what the user can expect based on the documentation, including for new devices. The approach taken here is to flag whether a device might be a point-to-point link with the new FLAG_POINTTOPOINT setting in the usbnet driver_info. A driver can set both FLAG_POINTTOPOINT and FLAG_ETHER if it is not sure (e.g. cdc_ether), or just one of the two. The usbnet framework only looks at the MAC address for device naming if both flags are set, otherwise it trusts the flag. Signed-off-by: Arnd Bergmann <arnd.bergmann@linaro.org> Tested-by: Andy Green <andy.green@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30net/usb: Ethernet quirks for the LG-VL600 4G modemAndrzej Zaborowski
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: Andrzej Zaborowski <balrogg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31USB: cdc_ether: remove unneeded checkDan Carpenter
We already verified that "dev->udev->actconfig->extralen" was non-zero so "len" is non-zero here as well. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-04-30cdc_ether: Identify MBM devices by GUID in MDLM descriptorJonas Sjöquist
This patch removes vid/pid for Ericsson MBM devices from the whitelist set of devices. The MBM devices are instead identified by GUID. In order for cdc_ether to handle these devices the GUID in the MDLM descriptor is tested. All MBM devices currently handled by cdc_ether as well as future CDC Ethernet MBM devices can be identified by the GUID. This is the same solution used in Carl Nordbeck's mbm driver, http://kerneltrap.org/mailarchive/linux-usb/2008/11/17/4141384/thread I post this as RFC to get feedback on however cdc_ether is the correct place to do the binding, or if it should be done in a separate driver, e.g. zaurus. Signed-off-by: Jonas Sjöquist <jonas.sjoquist@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28cdc_ether: fix autosuspend for mbm devicesTorgny Johansson
Autosuspend works until you bring the wwan interface up, then the device does not enter autosuspend anymore. The following patch fixes the problem by setting the .manage_power field in the mbm_info struct to the same as in the cdc_info struct (cdc_manager_power). Signed-off-by: Torgny Johansson <torgny.johansson@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-23cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)Torgny Johansson
This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/usb: Use netif_<level> logging facilitiesJoe Perches
Convert from: if (netif_msg_<foo>(priv)) dev_<level>(dev... to netif_<level>(priv, foo, dev... Also convert a few: if (i < REG_TIMEOUT) { etc... return ret; } to if (i >= REG_TIMEOUT) goto fail; etc... return ret; Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17usbnet: Convert dev(dbg|err|warn|info) macros to netdev_<level>Joe Perches
These macros are too similar to the dev_<level> equivalents but take a usbnet * argument. Convert them to the recently introduced netdev_<level> macros and remove the old macros. The old macros had "\n" appended to the format string. Add the "\n" to the converted uses. Some existing uses of the dev<foo> macros in cdc_eem.c probably mistakenly had trailing "\n". No "\n" added there. Fix net1080 this/other log message inversion. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-29cdc_ether: Partially revert "usbnet: Set link down initially ..."Ben Hutchings
Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in <http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Avi Rozen <avi.rozen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03usbnet & cdc-ether: Autosuspend for online devicesOliver Neukum
Using remote wakeup and delayed transmission to allow online device to go into usb autosuspend. Minimal alternate support for devices that don't support remote wakeup. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03cdc-ether: Implement reset_resume()Oliver Neukum
Normal resume can do double duty as reset_resume() for this driver as it keeps no state in the device Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03drivers/net: Move && and || to end of previous lineJoe Perches
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-11usbnet: Set link down initially for drivers that update link stateBen Hutchings
Some usbnet drivers update link state while others do not due to hardware limitations. Add a flag to distinguish those that do, and set the link down initially for their devices. This is intended to fix this bug: http://bugs.debian.org/444043 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/usb/cdc_ether.c All CDC ethernet devices of type USB_CLASS_COMM need to use '&mbm_info'. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04cdc_ether: additional Ericsson MBM PID's to the whitelistTorgny Johansson
Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-05usbnet: Use wwan%d interface name for mobile broadband devicesMarcel Holtmann
Add support for usbnet based devices like CDC-Ether to indicate that they are actually mobile broadband devices. In that case use wwan%d as default interface name. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-19cdc_ether: additional PID's to the whitelistJonas Sjöquist
This patch adds five PID's to the whitelist set of devices. Devices added to the whitelist: Dell Wireless 5530 HSPA Ericsson Mobile Broadband Module variants (F3507g, F3607gw and F3307) Toshiba F3507g Signed-off-by: Jonas Sjöquist <jonas.sjoquist@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether.cPeter Holik
because of using the same function get_ethernet_addr as cdc_ether.c i export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether (suggested by Oliver Neukum). Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02cdc_ether: add usb id for Ericsson F3507gBjørn Mork
The Ericsson F3507g wireless broadband module provides a CDC Ethernet compliant interface, but identifies it as a "Mobile Direct Line" CDC subclass, thereby preventing the CDC Ethernet class driver from picking it up. This patch adds the device id to cdc_ether.c as a workaround. Ericsson has provided a "class" driver for this device: http://kerneltrap.org/mailarchive/linux-net/2008/10/28/3832094 But closer inspection of that driver reveals that it adds little more than duplication of code from cdc_ether.c. See also http://marc.info/?l=linux-usb&m=123334979706403&w=2 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22rndis_host: support WM6 devices as modemsThomas Backlund
This patch allows Windows Mobile 6 devices to be used for tethering -- that is, used as modems. It was requested by AdamW in kernel bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=11119 and Mandriva kernel-discuss list. It is tested and confirmed to work by Peterl: http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543 This patch is based on the patch in the above kernel bugzilla, which is from the usb-rndis-lite tree. [ dbrownell@users.sourceforge.net: misc fixes ] Signed-off-by: Thomas Backlund <tmb@mandriva.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-01Move usbnet.h and rndis_host.h to include/linux/usbJussi Kivilinna
Move headers usbnet.h and rndis_host.h to include/linux/usb and fix includes for drivers/net/usb modules. Headers are moved because rndis_wlan will be outside drivers/net/usb in drivers/net/wireless and yet need these headers. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-01cdc_ether: Hardwire CDC descriptors when missingBjorge Dijkstra
Just as ActiveSync devices, some regular RNDIS devices also lack the CDC descriptors (e.g. devices based on BCM4320 WLAN chip). This patch hardwires the CDC descriptors for all RNDIS style devices when they are missing. Signed-off-by: Bjorge Dijkstra <bjd@jooz.net> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-02net/usb/cdc_ether minor sparse cleanupDavid Brownell
Remove an "sparse" warning about a shadowed variable name. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-23USB: handle more rndis_host odditiesDavid Brownell
Workaround another device firmware bug, wherein CDC descriptors get placed in a wrong place never previously observed in the wild. Fix a bug where a seeming RNDIS device returns a bogus response during device initialization. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-10Move USB network drivers to drivers/net/usb.Jeff Garzik
It is preferable to group drivers by usage (net, scsi, ATA, ...) than by bus. When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer is probably less qualified on networking issues than a networking maintainer. Also, from a practical standpoint, chips often appear on multiple buses, which is why we do not put drivers into drivers/pci/net. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v0.10.2 at 2024-11-09 08:58:34 (GMT)