summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas
AgeCommit message (Collapse)Author
2007-10-10[LIBERTAS]: fix oops on the blackfin architectureVladimir Davydov
Fixing memory alignment problems on the blackfin architecture (maybe on the ARM also) Signed-off-by: Vladimir Davydov <vladimir.davydov@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[LIBERTAS]: fix oops on the blackfin architectureVladimir Davydov
Reserve two bytes to align pointer to the IP header. Signed-off-by: Vladimir Davydov <vladimir.davydov@promwad.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[LIBERTAS]: fix interrupts in CF driverRyan Mallon
The following patch fixes the tx transmit timeout problem, which is caused by the interrupts being incorrectly check and masked. The patch moves the interrupt masking code so that interrupts are enabled only when the driver is registered and only disabled when the driver is unregistered. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[LIBERTAS]: set dnld_sent correctly for CF partsRyan Mallon
Corrects a minor bug with priv->dnld_sent being set incorrectly in if_cs_host_to_card. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_countJeff Garzik
These have been superceded by the new ->get_sset_count() hook. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10drivers/net/: all drivers/net/ cleanup with ARRAY_SIZEDenis Cheng
Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[PATCH] libertas: remove unused adhoc_rates_b definitionJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: printk warning fixesAndrew Morton
drivers/net/wireless/libertas/if_cs.c: In function 'if_cs_prog_helper': drivers/net/wireless/libertas/if_cs.c:462: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' drivers/net/wireless/libertas/if_cs.c: In function 'if_cs_prog_real': drivers/net/wireless/libertas/if_cs.c:538: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] net: Kill some unneeded allocation return value casts in libertasJesper Juhl
kmalloc() and friends return void*, no need to cast it. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: advertise 11g ad-hoc ratesBrajesh Dave
Advertise support for 802.11g bitrates when starting adhoc networks, not just 802.11b bitrates. Signed-off-by: Brajesh Dave <brajeshd@marvell.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: region code values specified as 8bitMarek Vašut
This patch strips away possible mess in regioncode (eg. on my card - 88W8305 chipset - I get 0x3031 instead of expected 0x0031 and as a result the driver defaults to USA region which is obviously incorrect). Following patch fixes the issue. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: properly end commands on hardware failurePierre Ossman
Make sure that errors reported by the hardware layer is properly handled. Otherwise commands tend to get stuck in limbo. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: send reset command directly instead of calling ↵Dan Williams
libertas_reset_device Ensures that any platform specific code that might live in libertas_reset_device (for example, OLPC tells the EC to do a GPIO-toggled reset of the wireless from libertas_reset_device) isn't called. Could be handled better by interface-specific callbacks and a flag for "other hardware reset". Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Marcelo Tosatti <marcelo@kvack.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: don't stomp on interface-specific private dataDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: reorganize and simplify init sequenceDan Williams
This patch moves all firmware load responsibility into the interface-specific code and gets rid of the firmware pointer in the generic card structure. It also removes 3 fairly unecessary callbacks: hw_register_dev, hw_unregister_dev, and hw_prog_firmware. It also makes the init sequence from interface probe functions more logical, as there are paired add/remove and start/stop calls into generic libertas code. Because the USB driver code uses the same TX URB callback for both firmware upload (where the generic libertas structure isn't initialized yet) and for normal operation (where it is), some bits of USB code have to deal with 'priv' being NULL. All USB firmware upload bits have been changed to not require 'priv' at all, but simply the USB card structure. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix inadvertant removal of bits from commit ↵Dan Williams
831441862956fffa17b9801db37e6ea1650b0f69 Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: bump driver versionDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix sparse-reported problemsDan Williams
A few fields being converted to the wrong sized type, and a few missed endian conversions. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: better descriptions for association errorsDan Williams
Describe the association response status code the firmware returns, based on mail to libertas-dev from Ronak. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: ignore spurious mesh autostart eventsDan Williams
Don't trust the firmware to always send them at the right time, ignore them when the driver thinks mesh autostart is disabled. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix misspelling in debug messageDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: pass boot2 version to firmwareLuis Carlos Cobo
Boot2 version used to be hardcoded in the uploaded firmware, this patch preserves the boot2 version before uploading firmware and sends it to the firmware again on resume. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: push WEXT scan requests to a work queueDan Williams
Push WEXT scan requests to a workqueue and have each partial scan queue the next part, then only report results when the complete scan has finished. Full scans don't go through the work queue. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] drivers/net/wireless/libertas/cmd.c: fix adapter->driver_lock ↵Eugene Teo
dereference adapter is NULL if cmdnode is not. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix assignment of WEP key typeDan Williams
keytype is a u8 Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: monitor mode support for OLPC firmwareLuis Carlos Cobo
Driver support for the monitor mode support that will be available in the next OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2). To activate monitor mode, echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap where mode is the hex mask that specifies which frames to sniff (in short, 0x1 for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero mode will activate the monitor mode, inhibiting transmission in ethX and mshX interfaces and routing all the incoming traffic to a new rtapX interface that will output the packets in 802.11+radiotap headers format. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix a few wext abuses...Jean Tourrilhes
o SIOCGIWNAME is not designed to return the version number of the driver. On the other hand, you are free to abuse SIOCGIWNICKN for that purpose. o Don't attempt to fix the WE19/WE20 transition in the driver, because your fixes are bogus, and redundant with the code in the kernel (you may endup with +2, you can't read 32 char ESSID...). o In SIOCSIWTXPOW, if you specified in iwrange that you want dBm, you should only get dBm, which allow to reduce code bloat. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: keep mesh autostart enabled while asleepLuis Carlos Cobo
After loading the firmware, mesh autostart will be disabled. After that, the user will still be able to enable or disable it at will. On suspend, it will be always activated and later on resume it will go back to the state it had before going to sleep. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: revert CAPINFO_MASK to its original valueLuis Carlos Cobo
CAPINFO_MASK changed on commits 981f187b and a091095b. Reverting to the original value. Also move CAPINFO_MASK into the sole user, join.c. CAPINFO_MASK should be in host CPU byte order; capability is converted to device byte order elsewhere. This fixes OLPC ticket #2161 Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: push mesh beacon bit to userspace in scan resultsDan Williams
Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: send association events on adhoc reassociationDan Williams
Send association event to userspace when reassociating to the same ad-hoc network, because it's still an association. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix two debug statements in cmdresp.cHolger Schurig
Purely cosmetic: this moves an lbs_deb_enter() to the proper place and changes an erraneous lbs_deb_enter_args() into lbs_deb_leave_args() Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove bss_descriptor->timestampHolger Schurig
Noone used this variable. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove bss_descriptior->networktsfHolger Schurig
This value was parsed out, but then nowhere used ... except in some debugfs output. I can't imagine anyone wanting to use this value for anything real (as no other driver exports it), so bye-bye. Along this, made the columns of /sys/kernel/debug/libertas_wireless/*/getscantable align again. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->scantypeHolger Schurig
scantype was initialized with CMD_SCAN_TYPE_ACTIVE, but there is no code that would ever change it, so we can use that variable directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->scanmodeHolger Schurig
scanmode was initialized with CMD_BSS_TYPE_ANY, but there is no code that ever can store another value there, so it can go away. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->beaconperiodHolger Schurig
beaconperiod was initialized with MRVDRV_BEACON_INTERVAL, but there is no code that would ever change it's value. We can use the define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->adhoc_grate_enabledHolger Schurig
The variable was initialized with 0 (false). There is no code that would ever change it, so we can use the false-patch directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->listenintervalHolger Schurig
listeninterval was initialized with MRVDRV_DEFAULT_LISTEN_INTERVAL, but there exists that would ever change it. So we can use this define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->regiontableindexHolger Schurig
The value was computed, but then never used. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->atimwindowHolger Schurig
This varaible was initialized with 0 but there is no code that would ever change it's value. So it can go away. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->multipledtimHolger Schurig
multipledtim was initialized with MRVDRV_DEFAULT_MULTIPLE_DTIM and then kept at that value, so we could use that define directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->locallistenintervalHolger Schurig
locallisteninterval was initialized with 0, but there is no code that changes it, rendering it rather useless. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->nullpktintervalHolger Schurig
No code ever initialized this variable, so it was 0 because of kzalloc(). But no other code changes it, making it rather useless. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->{data,bcn}_avg_factorHolger Schurig
Those two variables were initialized with some default values, but there is no code that would ever change them. So we could use as well the defaults directly. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->rxpd_rateHolger Schurig
No code uses the contents of this variable, so it can go. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: remove adapter->txrateHolger Schurig
The value of txrate was only set by a CMD_802_11_TX_RATE_QUERY command, but there was no code in the driver that ever issued this command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] libertas: fix WEXT quality reportingDan Williams
Found by Ronak and others at Marvell. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-08-17 18:00:49 (GMT)