summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2012-09-14Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-09-12rtlwifi: Remove EXPERIMENTAL as pre-requisite for the driversLarry Finger
All of the rtlwifi-family of drivers have been in the kernel since 3.1 or earlier. The dependence on EXPERIMENTAL can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: add e-scan support.Hante Meuleman
This patch adds e-scan support (currently i-scan is in use). E-scan is a more powerful and memory efficient method for scanning. E-scan will be the default scan method and eventually, i-scan support will be removed. The scan methods do not make any difference to the end-user. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: avoid using local usb data.Hante Meuleman
This patch removes usage of some of the local data in the usb host interface driver. This is a step in the preperation to support multiple USB devices. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: refill buffers on rx protocol error.Hante Meuleman
This patch fixes a bug where rx buffer does not get refilled if the packet received has an rx protocol error. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Clean up scan related code.Hante Meuleman
Clean up scan related code in preparation of a new scan mechanism (e-scan) which will follow in a separate patch. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Add tx flow control on net if queue for USB.Hante Meuleman
Enable tx flow control for USB host interface. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Add extra data support to firmware event queueing.Hante Meuleman
Firmware events can contain extra data. This patch adds support to copy this data when it exists. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-12brcmfmac: Stop all net if queues on tx flow halt.Hante Meuleman
When tx flow is to be blocked due to host interface throttle then all net if queues should be stopped. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11libertas: set mac control synchronously during initDaniel Drake
CMD_MAC_CONTROL is currently sent async to the firmware, and is sent from the lbs_setup_firmware() path during device init. This means that device init can complete with commands pending, and the if_sdio driver will sometimes power down the device (after init) with this command still pending. This was causing an occasional spurious command timeout after init, leading to a device reset. Fix this by making CMD_MAC_CONTROL synchronous when called from the lbs_setup_firmware() path. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Choose correct LED pin for AR9565Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Rename antenna diversity macrosSujith Manoharan
The register macros for antenna diversity are common for AR9462 and AR9565, rename them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Handle gentimer termination properlySujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: separate TxPD processing routine for APAvinash Patil
This patch adds separate tx packet descriptor routine for AP interface. This function fills bss_type, bss_num, wmm packet delay information etc for TxPD going on AP interface. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: disable WOW by defaultBing Zhao
Some platforms do not support WOW. Let's change the default wakeup criteria to 0. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: support custom world regulatory domainAmitkumar Karwar
country 00 (world regulatory domain) doesn't define channels 52 - 64 and 100 - 140. Add these channels to our custom world regulatory domain. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: do not hint regulatory domain with f/w country codeBing Zhao
We will use world regulatory domain (country 00) as default when driver is loaded. Later after a successful association cfg80211 will change the regulatory domain to a specific country if the AP has advertised country IE. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: use country ie of requested AP while associatingAmitkumar Karwar
AP's country ie is parsed and 11d information is updated in firmware while associating. Previous mwifiex_send_domain_info_cmd_fw() call in association path is not necessary now. Hence it is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: update adapter->bss_prio_tbl[j].bss_prio_cur correctlyAmitkumar Karwar
"adapter->bss_prio_tbl[j].bss_prio_head" points to linked list of interfaces with priority 'j'. "bss_prio_tbl[j].bss_prio_cur" is supposed to point to next interface every time the routine for dequeuing the packet is called. This ensures that each interface gets fair chance. Currently we have AP and station interfaces with priority '0'. Therefore "adapter->bss_prio_tbl[0].bss_prio_cur" should alternately point to AP and station nodes. Since "bss_prio_cur" is not correctly updated, for each packet picked for AP, two packets are picked for station interface. This patch fixes the problem by correctly updating "bss_prio_cur". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: have same priority for AP and station trafficAmitkumar Karwar
Currently AP interface has higher priority over station. Hence separate entries are created in "adapter->bss_prio_tbl" for these interfaces and station packet is dequeued only if there is not packet in queue for AP. It is observed that ping for station interface doesn't work if heavy traffic is running on AP. The problem is fixed by having same priority for both the interfaces. This patch also removes an extra initialisation for "priv->bss_priority". Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove AMSDU_AGGR_CTRL command response handlerAmitkumar Karwar
HostCmd_CMD_AMSDU_AGGR_CTRL is never called with GET action. So the code in mwifiex_ret_amsdu_aggr_ctrl() becomes redundant. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove 11N_CFG command response handlerAmitkumar Karwar
HostCmd_CMD_11N_CFG is never called with GET action. So the code in mwifiex_ret_11n_cfg() becomes redundant. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11mwifiex: remove get operation code for SUBSCRIBE EVENT commandAmitkumar Karwar
We don't send this command with GET action. Redundant code in mwifiex_ret_subsc_evt() is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: add 8 points for 5G temp slopRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: use peak detection for 5GHzRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Wait BT calibration to completeRajkumar Manoharan
Whenever BT calibration requested, WLAN has to wait for the calibration to be completed. But right now we defer the waiting which might cause BT calibration to fail. Fix that. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11rndis_wlan: remove pointless check from rndis_scan()Wei Yongjun
In rndis_scan(), 'request' is actually always valid pointer and the !request check is unneeded, so remove it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add PCI ID for AR9565Sujith Manoharan
Enable AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Program correct PLL value for AR9565Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Fix spur mitigation for AR9565Sujith Manoharan
Exclude CCK spur mitigation, freq 2437 for OFDM and add AR9565-specific logic. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Set correct max streams for AR9565Sujith Manoharan
Also, set the correct chainmask. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 HW supportSujith Manoharan
Various parts of the code require AR9565 checks, this patch adds them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add AR9565 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Add version/revision macros for AR9565Sujith Manoharan
And recognize the device in the init path. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11p54: fix off-by-one null pointer bug in p54_tx_80211Christian Lamparter
This patch fixes a regression which was introduced in: "mac80211: move TX station pointer and restructure TX" IP: p54_tx_80211+0x21/0x513 [p54common] Oops: 0000 [#1] SMP Modules linked in: p54usb p54common [...] Pid: 13394, comm: hostapd 3.6.0-rc4-wl+ RIP: 0010:p54_tx_80211+0x21/0x513 RSP: 0018:... EFLAGS: 00010292 [...] Process hostapd Stack: [...] Call Trace: p54_bss_info_changed+0x204/0x21e [p54common] ieee80211_del_station+0x16/0x32 [mac80211] ieee80211_start_ap+0x10f/0x157 [mac80211] nl80211_start_ap+0x315/0x361 [cfg80211] p54_tx_80211 function is called as part of the beacon update. The caller p54_bss_info_changed has to supply a valid tx control struct, or the control->sta will lead to a null pointer dereference. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11drivers/net/wireless/ath/ath9k/ar9003_mac.c: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Add Generic hardware timer interrupt in debugfsMohammed Shafi Shajakhan
Having generic hardware timer interrupt in debugfs would come handy when we are debugging 3 WIRE BTCOEX issues. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and configure thermocal for AR9462Rajkumar Manoharan
Read and configure thermometer calibration results read from OTP card. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Read and apply thermometer settings from EEPROMRajkumar Manoharan
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11drivers/net/wireless/rtlwifi/rtl8192de/phy.c: removes unnecessary semicolonPeter Senna Tschudin
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11wireless: at76c50x: eliminate hex2str()Andy Shevchenko
The hex2str() is substituted by '%*phD' specificator. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Cancel BTCOEX related work before disabling BTCOEXMohammed Shafi Shajakhan
Before disabling BTCOEX in the h/w cancel all BTCOEX related works. This is similar to the commit in ath9k(c32cdbd8) ath9k: Stop the BTCOEX timers before disabling BTCOEX Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: Add a modparam to enable BTCOEX rather than defaultMohammed Shafi Shajakhan
Enable BTCOEX for WB193(which seems to be the only supported ath9k_htc BTCOEX chipset)only when it is enabled via modparam, rather than enabling it by default. Cc: Vivek Natarajan <nataraja@qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_htc: minor cleanup in ath9k_htc_add_stationMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Cleanup add/change_interface callbacksMohammed Shafi Shajakhan
*Remove all the checks that will be handled by cfg80211 based on the interface combination advertised. For instance, driver supports at the maximum 8 beaconing interface, while we advertise maximum 8 beaconing interface in the interface combination support. *cfg80211 will take care of not allowing us to add an interface that is not supported by the driver, further if the change_interface changes the old interface to a beaconing interface while we had reached the max limit of 8 beaconing interface, again cfg80211 takes care of this stuff! So remove all these checks. *Beautify placing PS wrappers in the appropriate position. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Remove an obselete function declarationMohammed Shafi Shajakhan
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Make use of ath_stop_ani wrapperMohammed Shafi Shajakhan
Additionally it has a neat debug message informing us that we are stopping the ANI algorithm. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k: Fix BTCOEX timer triggering comparisionMohammed Shafi Shajakhan
Its more correct to convert btcoex_period to 'us' while comparing with btcoex_no_stomp which is in 'us'. Did not find any functionality issues being fixed, as the generic hardware timer triggers are usually refreshed with the newer duty cycle. Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11ath9k_hw: Fix invalid MCI GPM index access/cachingMohammed Shafi Shajakhan
There is a possibility that AR_MCI_GPM_1 register can return 0xdeadbeef and this results in caching of invalid GPM index in ar9003_mci_is_gpm_valid. Ensure we have appropriate checks to avoid this. Cc: xijin luo <xijin@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-11brcm80211: Remove bogus memcpy in ai_detachAndi Kleen
gcc 4.8 warns for this memcpy. While the copy size is correct, the whole copy seems to be a nop because the destination is never used, and there's no need to use memcpy to copy pointers anyways. And the type of the pointer was wrong, but at least those are always the same. Just remove it. /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c: In function 'ai_detach': /backup/lsrc/git/linux-lto-2.6/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c:539:32: warning: argument to 'sizeof' in 'memcpy' call is the same pointer type 'struct si_pub **' as the destination; expected 'struct si_pub *' or an explicit length [-Wsizeof-pointer-memaccess] memcpy(&si_local, &sih, sizeof(struct si_pub **)); ^ Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-10-22 13:59:25 (GMT)