summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix bluetooth userland regression reported by Keith Packard, from Gustavo Padovan. 2) Revert ath9k PS idle change, from Sujith Manoharan. 3) Correct default TCP memory limits (again), from Eric Dumazet. 4) Fix tcp_rcv_rtt_update() accidental use of unscaled RTT, from Neal Cardwell. 5) We made a facility for layers like wireless to say how much tailroom they need in the SKB for link layer stuff such as wireless encryption etc., but TCP works hard to fill every SKB out to the end defeating this specification. This leads to every TCP packet getting reallocated by the wireless code in order to have the right amount of tailroom available. Fix TCP to only fill SKBs out to the real amount of data area it asked for during the allocation, this way it won't eat into the slack added for the device's tailroom needs. Reported by Marc Merlin and fixed by Eric Dumazet. 6) Leaks, endian bugs, and new device IDs in bluetooth from Santosh Nayak, João Paulo Rechi Vita, Cho, Yu-Chen, Andrei Emeltchenko, AceLan Kao, and Andrei Emeltchenko. 7) OOPS on tty_close fix in bluetooth's hci_ldisc from Johan Hovold. 8) netfilter erroneously scales TCP window twice, fix from Changli Gao. 9) Memleak fix in wext-core from Julia Lawall. 10) Consistently handle invalid TCP packets in ipv4 vs. ipv6 conntrack, from Jozsef Kadlecsik. 11) Validate IP header length properly in netfilter conntrack's ipv4_get_l4proto(). * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits) NFC: Fix the LLCP Tx fragmentation loop rtlwifi: Add missing DMA buffer unmapping for PCI drivers rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routine tcp: avoid order-1 allocations on wifi and tx path net: allow pskb_expand_head() to get maximum tailroom bridge: Do not send queries on multicast group leaves MAINTAINERS: Mark NATSEMI driver as orphan'd. tcp: fix tcp_rcv_rtt_update() use of an unscaled RTT sample tcp: restore correct limit Revert "ath9k: fix going to full-sleep on PS idle" rt2x00: Fix rfkill_polling register function. bcma: fix build error on MIPS; implicit pcibios_enable_device netfilter: nf_conntrack: fix incorrect logic in nf_conntrack_init_net netfilter: nf_ct_ipv4: packets with wrong ihl are invalid netfilter: nf_ct_ipv4: handle invalid IPv4 and IPv6 packets consistently net/wireless/wext-core.c: add missing kfree rtlwifi: Fix oops on rate-control failure mac80211: Convert WARN_ON to WARN_ON_ONCE rtlwifi: rtl8192de: Fix firmware initialization nl80211: ensure interface is up in various APIs ...
2012-04-11rtlwifi: Add missing DMA buffer unmapping for PCI driversLarry Finger
In https://bugzilla.kernel.org/show_bug.cgi?id=42976, a system with driver rtl8192se used as an AP suffers from "Out of SW-IOMMU space" errors. These are caused by the DMA buffers used for beacons never being unmapped. This bug was also reported at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/961618 Reported-and-Tested-by: Da Xue <da@lessconfused.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-11rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routineLarry Finger
The current version of rtlwifi for USB operations uses kmalloc to acquire a 32-bit buffer for each read of the device. When _usb_read_sync() is called with the rcu_lock held, the result is a "sleeping function called from invalid context" BUG. This is reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775. The first case has the lock originating from within rtlwifi and could be fixed by rearranging the locking; however, the second originates from within mac80211. The kmalloc() call is removed from _usb_read_sync() by creating a ring buffer pointer in the private area and allocating the buffer data in the probe routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [This version good for 3.3+ - different patch for 3.2 - 2.6.39] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10Revert "ath9k: fix going to full-sleep on PS idle"Sujith Manoharan
This reverts commit c1afdaff90538ef085b756454f12b29575411214. Users have reported connection failures in 3.3.1 and suspend/resume failures in 3.4-rcX. Revert this commit for now - PS IDLE can be fixed in a clean manner later on. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-10rt2x00: Fix rfkill_polling register function.Chen, Chien-Chia
Move rt2x00rfkill_register(rt2x00dev) to rt2x00lib_probe_dev function. It fixes of starting rfkill_poll function at the right time if sets hard rfkill block and reboot. rt2x00mac_rfkill_poll should be starting before bringing up the wireless interface. Signed-off-by: Chen, Chien-Chia <machen@suse.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> CC: Kevin Chou <kevin.chou@mediatek.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09rtlwifi: Fix oops on rate-control failureLarry Finger
When the rate-control indexing is incorrectly set up, mac80211 issues a warning and returns NULL from the call to ieee80211_get_tx_rate(). When this happens, avoid a NULL pointer dereference. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09rtlwifi: rtl8192de: Fix firmware initializationLarry Finger
Before the switch to asynchronous firmware loading (mainline commit b0302ab), it was necessary to load firmware when initializing the first of the units in a dual-mac system. After the change, it is necessary to load firmware in both units. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-07Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bug fixes from Chris Metcalf: "This includes Paul Gortmaker's change to fix the <asm/system.h> disintegration issues on tile, a fix to unbreak the tilepro ethernet driver, and a backlog of bugfix-only changes from internal Tilera development over the last few months. They have all been to LKML and on linux-next for the last few days. The EDAC change to MAINTAINERS is an oddity but discussion on the linux-edac list suggested I ask you to pull that change through my tree since they don't have a tree to pull edac changes from at the moment." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits) drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing MAINTAINERS: update EDAC information tilepro ethernet driver: fix a few minor issues tile-srom.c driver: minor code cleanup edac: say "TILEGx" not "TILEPro" for the tilegx edac driver arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally arch/tile: remove bogus performance optimization arch/tile: return SIGBUS for addresses that are unaligned AND invalid arch/tile: fix finv_buffer_remote() for tilegx arch/tile: use atomic exchange in arch_write_unlock() arch/tile: stop mentioning the "kvm" subdirectory arch/tile: export the page_home() function. arch/tile: fix pointer cast in cacheflush.c arch/tile: fix single-stepping over swint1 instructions on tilegx arch/tile: implement panic_smp_self_stop() arch/tile: add "nop" after "nap" to help GX idle power draw arch/tile: use proper memparse() for "maxmem" options arch/tile: fix up locking in pgtable.c slightly arch/tile: don't leak kernel memory when we unload modules arch/tile: fix bug in delay_backoff() ...
2012-04-07Merge tag 'stable/for-linus-3.4-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm
2012-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking updates from David Miller: 1) Fix inaccuracies in network driver interface documentation, from Ben Hutchings. 2) Fix handling of negative offsets in BPF JITs, from Jan Seiffert. 3) Compile warning, locking, and refcounting fixes in netfilter's xt_CT, from Pablo Neira Ayuso. 4) phonet sendmsg needs to validate user length just like any other datagram protocol, fix from Sasha Levin. 5) Ipv6 multicast code uses wrong loop index, from RongQing Li. 6) Link handling and firmware fixes in bnx2x driver from Yaniv Rosner and Yuval Mintz. 7) mlx4 erroneously allocates 4 pages at a time, regardless of page size, fix from Thadeu Lima de Souza Cascardo. 8) SCTP socket option wasn't extended in a backwards compatible way, fix from Thomas Graf. 9) Add missing address change event emissions to bonding, from Shlomo Pongratz. 10) /proc/net/dev regressed because it uses a private offset to track where we are in the hash table, but this doesn't track the offset pullback that the seq_file code does resulting in some entries being missed in large dumps. Fix from Eric Dumazet. 11) do_tcp_sendpage() unloads the send queue way too fast, because it invokes tcp_push() when it shouldn't. Let the natural sequence generated by the splice paths, and the assosciated MSG_MORE settings, guide the tcp_push() calls. Otherwise what goes out of TCP is spaghetti and doesn't batch effectively into GSO/TSO clusters. From Eric Dumazet. 12) Once we put a SKB into either the netlink receiver's queue or a socket error queue, it can be consumed and freed up, therefore we cannot touch it after queueing it like that. Fixes from Eric Dumazet. 13) PPP has this annoying behavior in that for every transmit call it immediately stops the TX queue, then calls down into the next layer to transmit the PPP frame. But if that next layer can take it immediately, it just un-stops the TX queue right before returning from the transmit method. Besides being useless work, it makes several facilities unusable, in particular things like the equalizers. Well behaved devices should only stop the TX queue when they really are full, and in PPP's case when it gets backlogged to the downstream device. David Woodhouse therefore fixed PPP to not stop the TX queue until it's downstream can't take data any more. 14) IFF_UNICAST_FLT got accidently lost in some recent stmmac driver changes, re-add. From Marc Kleine-Budde. 15) Fix link flaps in ixgbe, from Eric W. Multanen. 16) Descriptor writeback fixes in e1000e from Matthew Vick. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) net: fix a race in sock_queue_err_skb() netlink: fix races after skb queueing doc, net: Update ndo_start_xmit return type and values doc, net: Remove instruction to set net_device::trans_start doc, net: Update netdev operation names doc, net: Update documentation of synchronisation for TX multiqueue doc, net: Remove obsolete reference to dev->poll ethtool: Remove exception to the requirement of holding RTNL lock MAINTAINERS: update for Marvell Ethernet drivers bonding: properly unset current_arp_slave on slave link up phonet: Check input from user before allocating tcp: tcp_sendpages() should call tcp_push() once ipv6: fix array index in ip6_mc_add_src() mlx4: allocate just enough pages instead of always 4 pages stmmac: re-add IFF_UNICAST_FLT for dwmac1000 bnx2x: Clear MDC/MDIO warning message bnx2x: Fix BCM57711+BCM84823 link issue bnx2x: Clear BCM84833 LED after fan failure bnx2x: Fix BCM84833 PHY FW version presentation bnx2x: Fix link issue for BCM8727 boards. ...
2012-04-06xen: only check xen_platform_pci_unplug if hvmIgor Mammedov
commit b9136d207f08 xen: initialize platform-pci even if xen_emul_unplug=never breaks blkfront/netfront by not loading them because of xen_platform_pci_unplug=0 and it is never set for PV guest. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-05bonding: properly unset current_arp_slave on slave link upVeaceslav Falico
When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05mlx4: allocate just enough pages instead of always 4 pagesThadeu Lima de Souza Cascardo
The driver uses a 2-order allocation, which is too much on architectures like ppc64, which has a 64KiB page. This particular allocation is used for large packet fragments that may have a size of 512, 1024, 4096 or fill the whole allocation. So, a minimum size of 16384 is good enough and will be the same size that is used in architectures of 4KiB sized pages. This will avoid allocation failures that we see when the system is under stress, but still has plenty of memory, like the one below. This will also allow us to set the interface MTU to higher values like 9000, which was not possible on ppc64 without this patch. Node 1 DMA: 737*64kB 37*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 51904kB 83137 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 10420096kB Total swap = 10420096kB 107776 pages RAM 1184 pages reserved 147343 pages shared 28152 pages non-shared netstat: page allocation failure. order:2, mode:0x4020 Call Trace: [c0000001a4fa3770] [c000000000012f04] .show_stack+0x74/0x1c0 (unreliable) [c0000001a4fa3820] [c00000000016af38] .__alloc_pages_nodemask+0x618/0x930 [c0000001a4fa39a0] [c0000000001a71a0] .alloc_pages_current+0xb0/0x170 [c0000001a4fa3a40] [d00000000dcc3e00] .mlx4_en_alloc_frag+0x200/0x240 [mlx4_en] [c0000001a4fa3b10] [d00000000dcc3f8c] .mlx4_en_complete_rx_desc+0x14c/0x250 [mlx4_en] [c0000001a4fa3be0] [d00000000dcc4eec] .mlx4_en_process_rx_cq+0x62c/0x850 [mlx4_en] [c0000001a4fa3d20] [d00000000dcc5150] .mlx4_en_poll_rx_cq+0x40/0x90 [mlx4_en] [c0000001a4fa3dc0] [c0000000004e2bb8] .net_rx_action+0x178/0x450 [c0000001a4fa3eb0] [c00000000009c9b8] .__do_softirq+0x118/0x290 [c0000001a4fa3f90] [c000000000031df8] .call_do_softirq+0x14/0x24 [c000000184c3b520] [c00000000000e700] .do_softirq+0xf0/0x110 [c000000184c3b5c0] [c00000000009c6d4] .irq_exit+0xb4/0xc0 [c000000184c3b640] [c00000000000e964] .do_IRQ+0x144/0x230 Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Tested-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04stmmac: re-add IFF_UNICAST_FLT for dwmac1000Marc Kleine-Budde
In commit (bfab27a stmmac: add the experimental PCI support) the IFF_UNICAST_FLT flag has been removed from the stmmac_mac_device_setup() function. This patch re-adds the flag. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Clear MDC/MDIO warning messageYaniv Rosner
This patch clears a warning message of "MDC/MDIO access timeout" which may appear when interface is loaded due to missing clock setting before resetting the LED, and starting periodic function too early. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM57711+BCM84823 link issueYaniv Rosner
Fix a link problem on the second port of BCM57711 + BCM84823 boards due to incorrect macro usage. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Clear BCM84833 LED after fan failureYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM84833 PHY FW version presentationYaniv Rosner
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix link issue for BCM8727 boards.Yaniv Rosner
This patch fixes a link problem on BCM57712 + BCM8727 designs in which the TX laser is controller by GPIO, after 1.60.xx drivers were previously loaded. On these designs the TX_LASER is enabled by logic AND between the PHY (through MDIO), and the GPIO. When an old driver is used, it disables the MDIO part, hence the GPIO control had no affect de facto. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Restore 1G LED on BCM57712+BCM8727 designs.Yaniv Rosner
Fix no-LED problem when link speed is 1G on BCM57712 + BCM8727 designs, by removing a logic error checking for a different PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM578x0-SFI pre-emphasis settingsYaniv Rosner
Fix 578x0-SFI pre-emphasis settings per HW recommendations to achieve better link strength. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM57810-KR AN speed transitionYaniv Rosner
BCM57810-KR link may not come up in 1G after running loopback test, so set the relevant registers to their default values before starting KR autoneg. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Fix BCM57810-KR FCYaniv Rosner
Fix 57810-KR flow-control handling link is achieved via CL37 AN. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: PFC fixYaniv Rosner
Fix a problem in which PFC frames are not honored, due to incorrect link attributes synchronization following PMF migration, and verify PFC XON is not stuck from previous link change. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04sky2: copy received packets on inefficient unaligned architecturestephen hemminger
Modified from original patch from Chris. The sky2 driver has to have 8 byte alignment of receive buffer on some chip versions. On architectures which don't support efficient unaligned access this doesn't work very well. The solution is to just copy all received packets which is what the driver already does for small packets. This allows the driver to be used on the Tilera TILEmpower-Gx, since the tile architecture doesn't currently handle kernel unaligned accesses, just userspace. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04net/bonding: correctly proxy slave neigh param setup ndo functionShlomo Pongratz
The current implemenation was buggy for slaves who use ndo_neigh_setup, since the networking stack invokes the bonding device ndo entry (from neigh_params_alloc) before any devices are enslaved, and the bonding driver can't further delegate the call at that point in time. As a result when bonding IPoIB devices, the neigh_cleanup hasn't been called. Fix that by deferring the actual call into the slave ndo_neigh_setup from the time the bonding neigh_setup is called. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04net/bonding: emit address change event also in bond_releaseShlomo Pongratz
commit 7d26bb103c4 "bonding: emit event when bonding changes MAC" didn't take care to emit the NETDEV_CHANGEADDR event in bond_release, where bonding actually changes the mac address (to all zeroes). As a result the neighbours aren't deleted by the core networking code (which does so upon getting that event). Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Nothing too big here, just small fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix more fallout from 9f97da78bf (Disintegrate asm/system.h for ARM) ARM: fix bios32.c build warning ARM: 7337/1: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms ARM: fix missing bug.h include in arch/arm/kernel/insn.c ARM: sa11x0: fix build errors from DMA engine API updates
2012-04-03r8169: enable napi on resume.Artem Savkov
NAPI is disabled during suspend and needs to be enabled on resume. Without this the driver locks up during resume in rtl_reset_work() trying to disable NAPI again. Signed-off-by: Artem Savkov <artem.savkov@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03bnx2x: correction to firmware interfaceYuval Mintz
Commit 621b4d6 updated the bnx2x driver to a new FW version, but lacked a commit to a header file with changes to the firmware's interface. The missing interface change causes iscsi and fcoe to misbehave with the updated firmware. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03phy:icplus:fix Auto Power Saving in ip101a_config_init.Srinivas Kandagatla
This patch fixes Auto Power Saving configuration in ip101a_config_init which was broken as there is no phy register write followed after setting IP101A_APS_ON flag. This patch also fixes the return value of ip101a_config_init. Without this patch ip101a_config_init returns 2 which is not an error accroding to IS_ERR and the mac driver will continue accessing 2 as valid pointer to phy_dev resulting in memory fault. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net
2012-04-03e1000e: Guarantee descriptor writeback flush success.Matthew Vick
In rare circumstances, a descriptor writeback flush may not work if it arrives on a specific clock cycle as a writeback request is going out. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-03e1000e: prevent oops when adapter is being closed and reset simultaneouslyBruce Allan
When the adapter is closed while it is simultaneously going through a reset, it can cause a null-pointer dereference when the two different code paths simultaneously cleanup up the Tx/Rx resources. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-03ixgbe: driver fix for link flapMultanen, Eric W
Fix up code so that changes in DCB settings are detected only when ixgbe_dcbnl_set_all is called. Previously, a series of 'change' commands followed by a call to ixgbe_dcbnl_set_all() would always be handled as a HW change - even if the net change was zero. This patch checks for this case of no actual change and skips going through the HW set process. Without this fix, the link could reset and result in a link flap. The core change in this patch is to check for changes in the ixgbe_copy_dcb_cfg() routine - and return a bitmask of detected changes. The other places where changes were detected previously can be removed. Signed-off-by: Eric Multanen <eric.w.multanen@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-03ppp: Don't stop and restart queue on every TX packetDavid Woodhouse
For every transmitted packet, ppp_start_xmit() will stop the netdev queue and then, if appropriate, restart it. This causes the TX softirq to run, entirely gratuitously. This is "only" a waste of CPU time in the normal case, but it's actively harmful when the PPP device is a TEQL slave — the wakeup will cause the offending device to receive the next TX packet from the TEQL queue, when it *should* have gone to the next slave in the list. We end up seeing large bursts of packets on just *one* slave device, rather than using the full available bandwidth over all slaves. This patch fixes the problem by *not* unconditionally stopping the queue in ppp_start_xmit(). It adds a return value from ppp_xmit_process() which indicates whether the queue should be stopped or not. It *doesn't* remove the call to netif_wake_queue() from ppp_xmit_process(), because other code paths (especially from ppp_output_wakeup()) need it there and it's messy to push it out to the other callers to do it based on the return value. So we leave it in place — it's a no-op in the case where the queue wasn't stopped, so it's harmless in the TX path. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Provide device string properly for USB i2400m wimax devices, also don't OOPS when providing firmware string. From Phil Sutter. 2) Add support for sh_eth SH7734 chips, from Nobuhiro Iwamatsu. 3) Add another device ID to USB zaurus driver, from Guan Xin. 4) Loop index start in pool vector iterator is wrong causing MAC to not get configured in bnx2x driver, fix from Dmitry Kravkov. 5) EQL driver assumes HZ=100, fix from Eric Dumazet. 6) Now that skb_add_rx_frag() can specify the truesize increment separately, do so in f_phonet and cdc_phonet, also from Eric Dumazet. 7) virtio_net accidently uses net_ratelimit() not only on the kernel warning but also the statistic bump, fix from Rick Jones. 8) ip_route_input_mc() uses fixed init_net namespace, oops, use dev_net(dev) instead. Fix from Benjamin LaHaise. 9) dev_forward_skb() needs to clear the incoming interface index of the SKB so that it looks like a new incoming packet, also from Benjamin LaHaise. 10) iwlwifi mistakenly initializes a channel entry as 2GHZ instead of 5GHZ, fix from Stanislav Yakovlev. 11) Missing kmalloc() return value checks in orinoco, from Santosh Nayak. 12) ath9k doesn't check for HT capabilities in the right way, it is checking ht_supported instead of the ATH9K_HW_CAP_HT flag. Fix from Sujith Manoharan. 13) Fix x86 BPF JIT emission of 16-bit immediate field of AND instructions, from Feiran Zhuang. 14) Avoid infinite loop in GARP code when registering sysfs entries. From David Ward. 15) rose protocol uses memcpy instead of memcmp in a device address comparison, oops. Fix from Daniel Borkmann. 16) Fix build of lpc_eth due to dev_hw_addr_rancom() interface being renamed to eth_hw_addr_random(). From Roland Stigge. 17) Make ipv6 RTM_GETROUTE interpret RTA_IIF attribute the same way that ipv4 does. Fix from Shmulik Ladkani. 18) via-rhine has an inverted bit test, causing suspend/resume regressions. Fix from Andreas Mohr. 19) RIONET assumes 4K page size, fix from Akinobu Mita. 20) Initialization of imask register in sky2 is buggy, because bits are "or'd" into an uninitialized local variable. Fix from Lino Sanfilippo. 21) Fix FCOE checksum offload handling, from Yi Zou. 22) Fix VLAN processing regression in e1000, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) sky2: dont overwrite settings for PHY Quick link tg3: Fix 5717 serdes powerdown problem net: usb: cdc_eem: fix mtu net: sh_eth: fix endian check for architecture independent usb/rtl8150 : Remove duplicated definitions rionet: fix page allocation order of rionet_active via-rhine: fix wait-bit inversion. ipv6: Fix RTM_GETROUTE's interpretation of RTA_IIF to be consistent with ipv4 net: lpc_eth: Fix rename of dev_hw_addr_random net/netfilter/nfnetlink_acct.c: use linux/atomic.h rose_dev: fix memcpy-bug in rose_set_mac_address Fix non TBI PHY access; a bad merge undid bug fix in a previous commit. net/garp: avoid infinite loop if attribute already exists x86 bpf_jit: fix a bug in emitting the 16-bit immediate operand of AND bonding: emit event when bonding changes MAC mac80211: fix oper channel timestamp updation ath9k: Use HW HT capabilites properly MAINTAINERS: adding maintainer for ipw2x00 net: orinoco: add error handling for failed kmalloc(). net/wireless: ipw2x00: fix a typo in wiphy struct initilization ...
2012-04-02sky2: dont overwrite settings for PHY Quick linkLino Sanfilippo
This patch corrects a bug in function sky2_open() of the Marvell Yukon 2 driver in which the settings for PHY quick link are overwritten. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by: Stephen Hemminger <shemminger@vyattta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02tg3: Fix 5717 serdes powerdown problemMatt Carlson
If port 0 of a 5717 serdes device powers down, it hides the phy from port 1. This patch works around the problem by keeping port 0's phy powered up. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02drivers/net/ethernet/tile: fix netdev_alloc_skb() bombingChris Metcalf
Commit dae2e9f430c46c29e3f771110094bd3da3625aa4 changed dev_alloc_skb() to netdev_alloc_skb(), adding a dev pointer, but erroneously used "->" instead of "." for a struct member when accessing the dev pointer. This change fixes the build breakage. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02tilepro ethernet driver: fix a few minor issuesChris Metcalf
This commit fixes a number of issues seen with the driver: - Improve handling of return credits to the hardware shim - Use skb_frag_size() appropriately - Fix driver so it works properly with netpoll for console over UDP Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02Merge remote-tracking branch 'kumar/next' into mergeBenjamin Herrenschmidt
2012-04-02net: usb: cdc_eem: fix mtuRabin Vincent
Make CDC EEM recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1494 bytes, and the host is unable to receive standard 1500-byte frames from the device. Tested with the Linux USB Ethernet gadget. Cc: Oliver Neukum <oliver@neukum.name> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02net: sh_eth: fix endian check for architecture independentYoshihiro Shimoda
SuperH has the "CONFIG_CPU_LITTLE_ENDIAN" and the "__LITTLE_ENDIAN__". But, other architecture doesn't have them. So, this patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02usb/rtl8150 : Remove duplicated definitionshuajun li
There exist duplicated macro definitions in rtl8150.c, remove them. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02rionet: fix page allocation order of rionet_activeAkinobu Mita
rionet_active is allocated from the page allocator and the allocation order is calculated on the assumption that the page size is 4KB, so it wastes memory on more than 4K page systems. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02via-rhine: fix wait-bit inversion.Andreas Mohr
Bug appeared in a384a33bb1c9ec2d99db2046b41f57023fa7d77b ("via-rhine: RHINE_WAIT_FOR macro removal). It can be noticed during suspend/resume. Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Cc: David Lv <DavidLv@viatech.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01net: lpc_eth: Fix rename of dev_hw_addr_randomstigge@antcom.de
In parallel to the integration of lpc_eth.c, dev_hw_addr_random() has been renamed to eth_hw_addr_random(). This patch fixes it also in the new driver lpc_eth.c. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>