summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-03-04sfc: Use write-combining to reduce TX latencyBen Hutchings
Based on work by Neil Turton <nturton@solarflare.com> and Kieran Mansley <kmansley@solarflare.com>. The BIU has now been verified to handle 3- and 4-dword writes within a single 128-bit register correctly. This means we can enable write- combining and only insert write barriers between writes to distinct registers. This has been observed to save about 0.5 us when pushing a TX descriptor to an empty TX queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Bump version to 3.1Ben Hutchings
All features originally planned for version 3.1 (and some that weren't) have been implemented. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Remove configurable FIFO thresholds for pause frame generationBen Hutchings
In Falcon we can configure the fill levels of the RX data FIFO which trigger the generation of pause frames (if enabled), and we have module parameters for this. Siena does not allow the levels to be configured (or, if it does, this is done by the MC firmware and is not configurable by drivers). So far as I can tell, the module parameters are not used by our internal scripts and have not been documented (with the exception of the short parameter descriptions). Therefore, remove them and always initialise Falcon with the default values. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Expose TX push and TSO counters through ethtool statisticsBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Update copyright datesBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Do not read STAT1.FAULT in efx_mdio_check_mmd()Ben Hutchings
This field does not exist in all MMDs we want to check, and all callers allow it to be set (fault_fatal = 0). Remove the loopback condition, as STAT2.DEVPRST should be valid regardless of any fault. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Read MC firmware version when requested through ethtoolBen Hutchings
We currently make no use of siena_nic_data::fw_{version,build} except to format the firmware version for ethtool_get_drvinfo(). Since we only read the version at start of day, this information is incorrect after an MC firmware update. Remove the cached version information and read it via MCDI whenever it is requested. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Reduce size of efx_rx_buffer further by removing data memberSteve Hodgson
Instead calculate the KVA of receive data. It's not like it's a hard sum. [bwh: Fixed to work with GRO.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28sfc: Reduce size of efx_rx_buffer by unionising skb and pageSteve Hodgson
[bwh: Forward-ported to net-next-2.6.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-02-28net: convert bonding to use rx_handlerJiri Pirko
This patch converts bonding to use rx_handler. Results in cleaner __netif_receive_skb() with much less exceptions needed. Also bond-specific work is moved into bond code. Did performance test using pktgen and counting incoming packets by iptables. No regression noted. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28netpoll: remove IFF_IN_NETPOLL flagAmerigo Wang
V4: rebase to net-next-2.6 This patch removes the flag IFF_IN_NETPOLL, we don't need it any more since we have netpoll_tx_running() now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28bonding: sync netpoll code with bridgeAmerigo Wang
V4: rebase to net-next-2.6 V3: remove an useless #ifdef. This patch unifies the netpoll code in bonding with netpoll code in bridge, thanks to Herbert that code is much cleaner now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25rtlwifi: Need to include vmalloc.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-02-24igb: update version stringCarolyn Wyborny
This will synchronize the version with the out of tree driver which shares its functionality. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: Update Intel copyright notice for driver source.Carolyn Wyborny
This fix updates copyright information to include current year 2011. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igb: add support for VF Transmit rate limit using iproute2Lior Levy
Implemented igb_ndo_set_vf_bw function which is being used by iproute2 tool. In addition, updated igb_ndo_get_vf_config function to show the actual rate limit to the user. The rate limitation can be configured only when the link is up. The rate limit value can be ranged between 0 and actual link speed measured in Mbps. A value of '0' disables the rate limit for this specific VF. iproute2 usage will be 'ip link set ethX vf Y rate Z'. After the command is made, the rate will be changed instantly. To view the current rate limit, use 'ip link show ethX'. The rates will be zeroed only upon driver reload or a link speed change. This feature is being supported only by 82576 device. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24igbvf: remove Tx hang detectionLior Levy
Removed Tx hang detection mechanism from igbvf. This mechanism has no affect and can cause false alarm message in some cases. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbevf: Fix name of function in function header commentGreg Rose
Some of the function names in function header comments did not match actual name of the function. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbevf: Enable jumbo frame support for X540 VFGreg Rose
The X540 controller allows jumbo frame setup on a per VF basis. Enable use of jumbo frames when the VF device belongs to the X540 controller. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-24ixgbe: Enable Jumbo Frames on the X540 10Gigabit ControllerGreg Rose
The X540 controller supports jumbo frames in SR-IOV mode. Allow configuration of jumbo frames either in the PF driver or on behalf of a VF. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-23qlcnic: Remove validation for max tx and max rx queuesRajesh Borundia
Max rx queues and tx queues are governed by fimware. So driver should not validate these values. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23qlcnic: fix checks for auto_fw_resetamit salecha
o Remove checks of 1 for auto_fw_reset module parameter. auto_fw_reset is of type int and can have value > 1. o Remove unnecessary #define for 1 Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23r6040: bump to version 0.27 and date 23Feb2011Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23r6040: fix multicast operationsShawn Lin
The original code does not work well when the number of mulitcast address to handle is greater than MCAST_MAX. It only enable promiscous mode instead of multicast hash table mode, so the hash table function will not be activated and all multicast frames will be recieved in this condition. This patch fixes the following issues with the r6040 NIC operating in multicast: 1) When the IFF_ALLMULTI flag is set, we should write 0xffff to the NIC hash table registers to make it process multicast traffic. 2) When the number of multicast address to handle is smaller than MCAST_MAX, we should use the NIC multicast registers MID1_{L,M,H}. 3) The hashing of the address was not correct, due to an invalid substraction (15 - (crc & 0x0f)) instead of (crc & 0x0f) and an incorrect crc algorithm (ether_crc_le) instead of (ether_crc). 4) If necessary, we should set HASH_EN flag in MCR0 to enable multicast hash table function. Reported-by: Marc Leclerc <marc-leclerc@signaturealpha.com> Tested-by: Marc Leclerc <marc-leclerc@signaturealpha.com> Signed-off-by: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Albert Chen <albert.chen@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23atl1[ce]: fix sparse warningsstephen hemminger
The dmaw_block is an enum and max_pay_load is u32. Therefore sparse gives warning about comparison of unsigned and signed value. Resolve by using min_t to force cast. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-02-22Merge branch 'net/ax88796' of git://git.pengutronix.de/git/mkl/linux-2.6David S. Miller
2011-02-22be2net: use hba_port_num instead of port_numAjit Khaparde
Use hba_port_num for phy loopback and ethtool phy identification. From: Suresh R <suresh.reddy@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: add code to display temperature of ASICAjit Khaparde
Add support to display temperature of ASIC via ethtool -S From: Somnath K <somnath.kotur@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: fix to ignore transparent vlan ids wrongly indicated by NICAjit Khaparde
With transparent VLAN tagging, the ASIC wrongly indicates packets with VLAN ID. Strip them off in the driver. The VLAN Tag to be stripped will be given to the host as an async message. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: variable name changeAjit Khaparde
change occurances of stats_ioctl_sent to stats_cmd_sent Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: fixes in ethtool selftestAjit Khaparde
> add missing separator between items in ethtool self_test array > fix reporting of test resluts when link is down and when selftest command fails. From: Suresh R <suresh.reddy@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: add new counters to display via ethtool statsAjit Khaparde
New counters: > jabber frame stats > red drop stats Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-02-22Merge branch 'fec' of git://git.pengutronix.de/git/ukl/linux-2.6David S. Miller
2011-02-22sh: sh_eth: Add support ethtoolNobuhiro Iwamatsu
This commit supports following functions. - get_settings - set_settings - nway_reset - get_msglevel - set_msglevel - get_link - get_strings - get_ethtool_stats - get_sset_count About other function, the device does not support. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-21ath9k_hw: Fix power on resetSujith Manoharan
Commit "ath9k_hw: add an extra delay when reseting AR_RTC_RESET" added an extra udelay to the reset routine. As the required delay is already present, remove this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add support for RT5390 chipRA-Shiang Tu
Add new RT5390 chip support Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add/Modify the GPIO register definitionShiang Tu
Revise/Add GPIO register related definitions Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add/Modify protection related register definitionsShiang Tu
Make the definition of protection related registers more precisely Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Remove superfluos empty lineHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21Revert "rt2x00 : avoid timestamp for monitor injected frame."Helmut Schaa
This reverts commit e81e0aef32bfa7f593b14479b9c7eaa7196798ac "rt2x00 : avoid timestamp for monitor injected frame." as it breaks proper timestamp insertion into probe responses injected by hostapd for example. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Benoit PAPILLAULT <benoit.papillault@free.fr> Cc: Alban Browaeys <prahal@yahoo.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Minor optimization for devices with RTS/CTS offloadHelmut Schaa
Only devices that don't have RTS/CTS offload need to check for IEEE80211_TX_RC_USE_RTS_CTS and IEEE80211_TX_RC_USE_CTS_PROTECT. By swapping both conditions we keep the same number of needed conditionals for devices without RTS/CTS offload but save one conditional on devices with RTS/CTS offload. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Fix rt2800 txpower setting to correct valueRA-Jay Hung
TX_PWR_CFG_* setting need to consider below cases -compesate 20M/40M tx power delta for 2.4/5GHZ band -limit maximum EIRP tx power to power_level of regulatory requirement Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna ↵RA-Jay Hung
diversity support For RT3070/RT3090/RT3390 with RX antenna diversity support, we must select default antenna using gpio control way even if we do not turn on antenna diversity feature. Seperate the meaning of TX/RX chain and antenna. Some chips use 2x2 TX/RX chain but may have 3 RX antennas or 1x1 TX/RX chain but may have 2 RX antennas to do antenna diversity. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Remove obsolete/unused macrosLarry Finger
The original code has many macros that are no longer needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192ce: Fix endian warningsLarry Finger
Drivers rtlwifi, and rtl8192ce generate a large number of sparse warnings. This patch fixes most of them. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: Modify build system for rtl8192cuLarry Finger
Modify Kconfig and Makefile to build rtl8192cu. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rtlwifi: rtl8192cu: Add routine trxGeorge
Add routine rtlwifi/rtl8192cu/trx.c. This routine differs from the rtl8192ce file of the same name. Signed-off-by: George <george0505@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-08 16:44:06 (GMT)