summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-10-21bnx2x: Fix Coalescing configurationDmitry Kravkov
bnx2x drivers configure coalescing incorrectly (e.g., as a result of a call to 'ethtool -c'). Although this is almost invisible to the user (due to NAPI) designated tests will show the configuration is incorrect. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21bnx2x: Unlock VF-PF channel on MAC/VLAN config errorAriel Elior
Current code returns upon failure, leaving the VF-PF in an unusable state; This patch adds the missing release so further commands could pass between PF and VF. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21bnx2x: Prevent an illegal pointer dereference during panicYuval Mintz
During a panic, the driver tries to print the Management FW buffer of recent commands. To do so, the driver reads the address of that buffer from a known address. If the buffer is unavailable (e.g., PCI reads don't work, MCP is failing, etc.), the driver will try to access the address it has read, possibly causing a kernel panic. This check 'sanitizes' the access, validating the read value is indeed a valid address inside the management FW's buffers. The patch also removes a read outside the scope of the buffer, which resulted in some unrelated chraracters appearing in the log. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21bnx2x: Fix Maximum CoS estimation for VFsYuval Mintz
bnx2x VFs do not support Multi-CoS; Current implementation erroneously sets the VFs maximal number of CoS to be > 1. This will cause the driver to call alloc_etherdev_mqs() with a number of queues it cannot possibly support and reflects in 'odd' driver prints. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacingMugunthan V N
When interrupt pacing is enabled, receive/transmit statistics are not updated properly by hardware which leads to ISR return with IRQ_NONE and inturn kernel disables the interrupt. This patch removed the checking of receive/transmit statistics from ISR. This patch is verified with AM335x Beagle Bone Black and below is the kernel warn when interrupt pacing is enabled. [ 104.298254] irq 58: nobody cared (try booting with the "irqpoll" option) [ 104.305356] CPU: 0 PID: 1073 Comm: iperf Not tainted 3.12.0-rc3-00342-g77d4015 #3 [ 104.313284] [<c001bb84>] (unwind_backtrace+0x0/0xf0) from [<c0017db0>] (show_stack+0x10/0x14) [ 104.322282] [<c0017db0>] (show_stack+0x10/0x14) from [<c0507920>] (dump_stack+0x78/0x94) [ 104.330816] [<c0507920>] (dump_stack+0x78/0x94) from [<c0088c1c>] (__report_bad_irq+0x20/0xc0) [ 104.339889] [<c0088c1c>] (__report_bad_irq+0x20/0xc0) from [<c008912c>] (note_interrupt+0x1dc/0x23c) [ 104.349505] [<c008912c>] (note_interrupt+0x1dc/0x23c) from [<c0086d74>] (handle_irq_event_percpu+0xc4/0x238) [ 104.359851] [<c0086d74>] (handle_irq_event_percpu+0xc4/0x238) from [<c0086f24>] (handle_irq_event+0x3c/0x5c) [ 104.370198] [<c0086f24>] (handle_irq_event+0x3c/0x5c) from [<c008991c>] (handle_level_irq+0xac/0x10c) [ 104.379907] [<c008991c>] (handle_level_irq+0xac/0x10c) from [<c00866d8>] (generic_handle_irq+0x20/0x30) [ 104.389812] [<c00866d8>] (generic_handle_irq+0x20/0x30) from [<c0014ce8>] (handle_IRQ+0x4c/0xb0) [ 104.399066] [<c0014ce8>] (handle_IRQ+0x4c/0xb0) from [<c000856c>] (omap3_intc_handle_irq+0x60/0x74) [ 104.408598] [<c000856c>] (omap3_intc_handle_irq+0x60/0x74) from [<c050d8e4>] (__irq_svc+0x44/0x5c) [ 104.418021] Exception stack(0xde4f7c00 to 0xde4f7c48) [ 104.423345] 7c00: 00000001 00000000 00000000 dd002140 60000013 de006e54 00000002 00000000 [ 104.431952] 7c20: de345748 00000040 c11c8588 00018ee0 00000000 de4f7c48 c009dfc8 c050d300 [ 104.440553] 7c40: 60000013 ffffffff [ 104.444237] [<c050d8e4>] (__irq_svc+0x44/0x5c) from [<c050d300>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 104.454220] [<c050d300>] (_raw_spin_unlock_irqrestore+0x34/0x44) from [<c00868c0>] (__irq_put_desc_unlock+0x14/0x38) [ 104.465295] [<c00868c0>] (__irq_put_desc_unlock+0x14/0x38) from [<c0088068>] (enable_irq+0x4c/0x74) [ 104.474829] [<c0088068>] (enable_irq+0x4c/0x74) from [<c03abd24>] (cpsw_poll+0xb8/0xdc) [ 104.483276] [<c03abd24>] (cpsw_poll+0xb8/0xdc) from [<c044ef68>] (net_rx_action+0xc0/0x1e8) [ 104.492085] [<c044ef68>] (net_rx_action+0xc0/0x1e8) from [<c0048a90>] (__do_softirq+0x100/0x27c) [ 104.501338] [<c0048a90>] (__do_softirq+0x100/0x27c) from [<c0048cd0>] (do_softirq+0x68/0x70) [ 104.510224] [<c0048cd0>] (do_softirq+0x68/0x70) from [<c0048e8c>] (local_bh_enable+0xd0/0xe4) [ 104.519211] [<c0048e8c>] (local_bh_enable+0xd0/0xe4) from [<c048c774>] (tcp_rcv_established+0x450/0x648) [ 104.529201] [<c048c774>] (tcp_rcv_established+0x450/0x648) from [<c0494904>] (tcp_v4_do_rcv+0x154/0x474) [ 104.539195] [<c0494904>] (tcp_v4_do_rcv+0x154/0x474) from [<c043d750>] (release_sock+0xac/0x1ac) [ 104.548448] [<c043d750>] (release_sock+0xac/0x1ac) from [<c04844e8>] (tcp_recvmsg+0x4d0/0xa8c) [ 104.557528] [<c04844e8>] (tcp_recvmsg+0x4d0/0xa8c) from [<c04a8720>] (inet_recvmsg+0xcc/0xf0) [ 104.566507] [<c04a8720>] (inet_recvmsg+0xcc/0xf0) from [<c0439744>] (sock_recvmsg+0x90/0xb0) [ 104.575394] [<c0439744>] (sock_recvmsg+0x90/0xb0) from [<c043b778>] (SyS_recvfrom+0x88/0xd8) [ 104.584280] [<c043b778>] (SyS_recvfrom+0x88/0xd8) from [<c043b7e0>] (sys_recv+0x18/0x20) [ 104.592805] [<c043b7e0>] (sys_recv+0x18/0x20) from [<c0013da0>] (ret_fast_syscall+0x0/0x48) [ 104.601587] handlers: [ 104.603992] [<c03acd94>] cpsw_interrupt [ 104.608040] Disabling IRQ #58 Cc: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18qlcnic: Validate Tx queue only for 82xx adapters.Himanshu Madhani
o validate Tx queue only in case of adapters which supports multi Tx queue. This patch is to fix regression introduced in commit aa4a1f7df7cbb98797c9f4edfde3c726e2b3841f "qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter" Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18be2net: pass if_id for v1 and V2 versions of TX_CREATE cmdVasundhara Volam
It is a required field for all TX_CREATE cmd versions > 0. This fixes a driver initialization failure, caused by recent SH-R Firmwares (versions > 10.0.639.0) failing the TX_CREATE cmd when if_id field is not passed. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18wanxl: fix info leak in ioctlSalva Peiró
The wanxl_ioctl() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró <speiro@ai2.upv.es> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please pull this batch of fixes intended for the 3.12 stream! For the mac80211 bits, Johannes says: "Jouni fixes a remain-on-channel vs. scan bug, and Felix fixes client TX probing on VLANs." And also: "This time I have two fixes from Emmanuel for RF-kill issues, and fixed two issues reported by Evan Huus and Thomas Lindroth respectively." On top of those... Avinash Patil adds a couple of mwifiex fixes to properly inform cfg80211 about some different types of disconnects, avoiding WARNINGs. Mark Cave-Ayland corrects a pointer arithmetic problem in rtlwifi, avoiding incorrect automatic gain calculations. Solomon Peachy sends a cw1200 fix for locking around calls to cw1200_irq_handler, addressing "lost interrupt" problems. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17net: qmi_wwan: Olivetti Olicard 200 supportEnrico Mioso
This is a QMI device, manufactured by TCT Mobile Phones. A companion patch blacklisting this device's QMI interface in the option.c driver has been sent. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Antonella Pellizzari <anto.pellizzari83@gmail.com> Tested-by: Dan Williams <dcbw@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17virtio-net: refill only when device is up during setting queuesJason Wang
We used to schedule the refill work unconditionally after changing the number of queues. This may lead an issue if the device is not up. Since we only try to cancel the work in ndo_stop(), this may cause the refill work still work after removing the device. Fix this by only schedule the work when device is up. The bug were introduce by commit 9b9cd8024a2882e896c65222aa421d461354e3f2. (virtio-net: fix the race between channels setting and refill) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17virtio-net: don't respond to cpu hotplug notifier if we're not readyJason Wang
We're trying to re-configure the affinity unconditionally in cpu hotplug callback. This may lead the issue during resuming from s3/s4 since - virt queues haven't been allocated at that time. - it's unnecessary since thaw method will re-configure the affinity. Fix this issue by checking the config_enable and do nothing is we're not ready. The bug were introduced by commit 8de4b2f3ae90c8fc0f17eeaab87d5a951b66ee17 (virtio-net: reset virtqueue affinity when doing cpu hotplug). Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17yam: remove a no-op in yam_ioctl()Dan Carpenter
We overwrite the ->bitrate with the user supplied information on the next line. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17net/ethernet: cpsw: Bugfix interrupts before enabling napiMarkus Pargmann
If interrupts happen before napi_enable was called, the driver will not work as expected. Network transmissions are impossible in this state. This bug can be reproduced easily by restarting the network interface in a loop. After some time any network transmissions on the network interface will fail. This patch fixes the bug by enabling napi before enabling the network interface interrupts. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17bnx2x: record rx queue for LRO packetsEric Dumazet
RPS support is kind of broken on bnx2x, because only non LRO packets get proper rx queue information. This triggers reorders, as it seems bnx2x like to generate a non LRO packet for segment including TCP PUSH flag : (this might be pure coincidence, but all the reorders I've seen involve segments with a PUSH) 11:13:34.335847 IP A > B: . 415808:447136(31328) ack 1 win 457 <nop,nop,timestamp 3789336 3985797> 11:13:34.335992 IP A > B: . 447136:448560(1424) ack 1 win 457 <nop,nop,timestamp 3789336 3985797> 11:13:34.336391 IP A > B: . 448560:479888(31328) ack 1 win 457 <nop,nop,timestamp 3789337 3985797> 11:13:34.336425 IP A > B: P 511216:512640(1424) ack 1 win 457 <nop,nop,timestamp 3789337 3985798> 11:13:34.336423 IP A > B: . 479888:511216(31328) ack 1 win 457 <nop,nop,timestamp 3789337 3985798> 11:13:34.336924 IP A > B: . 512640:543968(31328) ack 1 win 457 <nop,nop,timestamp 3789337 3985798> 11:13:34.336963 IP A > B: . 543968:575296(31328) ack 1 win 457 <nop,nop,timestamp 3789337 3985798> We must call skb_record_rx_queue() to properly give to RPS (and more generally for TX queue selection on forward path) the receive queue information. Similar fix is needed for skb_mark_napi_id(), but will be handled in a separate patch to ease stable backports. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17usbnet: fix error return code in usbnet_probe()Wei Yongjun
Fix to return -ENOMEM in the padding pkt alloc fail error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: report the correct LPANikita Kiryanov
Report the LPA by checking mii_if_info, instead of just saying "no LPA" every time. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: Implement full reset of DM9000 network deviceMichael Abbott
A Davicom application note for the DM9000 network device recommends performing software reset twice to correctly initialise the device. Without this reset some devices fail to initialise correctly on system startup. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: take phy out of reset during initNikita Kiryanov
Take the phy out of reset explicitly during system resume to avoid losing network connectivity. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: during init reset phy only for dm9000bNikita Kiryanov
Some of the changes introduced in commit 6741f40 (DM9000B: driver initialization upgrade) break functionality on DM9000A (error message during NFS boot: "dm9000 dm9000.0: eth0: link down") Since the changes were meant to serve only DM9000B, make them dependent on the chip type. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-10-14mwifiex: inform cfg80211 about disconnect for P2P client interfaceAvinash Patil
This patch adds missing cfg80211_disconnected event for P2P client interface upon successful deauthenticate command, deauthenticate event or disassociate event from FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-14mwifiex: inform cfg80211 about disconnect if device is removedAvinash Patil
If device is surprise removed, commands sent to FW including deauthenticate command fail as bus writes fail. We update our media_connected status to false and inform cfg80211 about disconnection only when command is successful. Since cfg80211 assumes device is still connected, it results into following WARN_ON during unload: WARNING: CPU: 0 PID: 18245 at net/wireless/core.c:937 cfg80211_netdev_notifier_call+0x175/0x4d0 [cfg80211]() Avoid this by emitting cfg80211_disconnected event even if the deauthenticate command fails. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-11net: smc91x: dont't use SMC_outw for fixing up halfword-aligned dataWill Deacon
SMC_outw invokes an endian-aware I/O accessor, which may change the data endianness before writing to the device. This is not suitable for data transfers where the memory buffer is simply a string of bytes that does not require any byte-swapping. This patches fixes the smc91x SMC_PUSH_DATA macro so that it uses the string I/O accessor for outputting the leading or trailing halfwords on halfword-aligned buffers. Cc: <netdev@vger.kernel.org> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-11farsync: fix info leak in ioctlSalva Peiró
The fst_get_iface() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-11net: sh_eth: Correct fix for RX packet errors on R8A7740Simon Horman
Nguyen Hong Ky posted a patch to correct RX packet errors on R8A7740 which was applied as 2c6221e4a5aab417 ("net: sh_eth: Fix RX packets errors on R8A7740"). Unfortunately sh_eth.c contains many similar instances of struct sh_eth_cpu_data and the patch was miss-applied, updating sh7734_data instead of r8a7740_data. This patch corrects this problem by. 1. Reverting the change to sh7734_data and; 2. Applying the change to r8a7740_data. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-10wireless: cw1200: acquire hwbus lock around cw1200_irq_handler() call.Solomon Peachy
This fixes "lost interrupt" problems that occurred on SPI-based systems. cw1200_irq_handler() expects the hwbus to be locked, but on the SPI-path, that lock wasn't taken (unlike in the SDIO-path, where the generic SDIO-code takes care of acquiring the lock). Cc: stable@vger.kernel.org Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Solomon Peachy <pizza@shaftnet.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10rtlwifi: rtl8192cu: Fix error in pointer arithmeticMark Cave-Ayland
An error in calculating the offset in an skb causes the driver to read essential device info from the wrong locations. The main effect is that automatic gain calculations are nonsense. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [2.6.39+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-09can: at91-can: fix device to driver data mapping for platform devicesMarc Kleine-Budde
In commit: 3078cde7 can: at91_can: add dt support device tree support was added to the at91_can driver. In this commit the mapping of device to driver data was mixed up. This results in the sam9x5 parameters being used for the sam9263 and the workaround for the broken mailbox 0 on the sam9263 not being activated. This patch fixes the broken platform_device_id table. Cc: linux-stable <stable@vger.kernel.org> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-10-09can: flexcan: fix mx28 detection by rearanging OF match tableMarc Kleine-Budde
The current implemetation of of_match_device() relies that the of_device_id table in the driver is sorted from most specific to least specific compatible. Without this patch the mx28 is detected as the less specific p1010. This leads to a p1010 specific workaround is activated on the mx28, which is not needed. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-10-09can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and ↵Marc Kleine-Budde
abort pending TX In patch 0d1862e can: flexcan: fix flexcan_chip_start() on imx6 the loop in flexcan_chip_start() that iterates over all mailboxes after the soft reset of the CAN core was removed. This loop put all mailboxes (even the ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63, this aborts any pending TX messages. After a cold boot there is random garbage in the mailboxes, which leads to spontaneous transmit of CAN frames during first activation. Further if the interface was disabled with a pending message (usually due to an error condition on the CAN bus), this message is retransmitted after enabling the interface again. This patch fixes the regression by: 1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX FIFO, 8 is used by TX. 2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that mailbox is aborted. Cc: linux-stable <stable@vger.kernel.org> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-10-09Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: =================== Please pull this batch of fixes intended for 3.12... Most of the bits are for iwlwifi -- Johannes says: "I have a fix for WoWLAN/D3, a PCIe device fix, we're removing a warning, there's a fix for RF-kill while scanning (which goes together with a mac80211 fix) and last but not least we have many new PCI IDs." Also for iwlwifi is a patch from Johannes to correct some merge damage that crept into the tree before the last merge window. On top of that, Felix Fietkau sends an ath9k patch to avoid a Tx scheduling hang when changing channels to do a scan. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09gianfar: Enable eTSEC-20 erratum w/a for P2020 Rev1Claudiu Manoil
Enable workaround for P2020/P2010 erratum eTSEC 20, "Excess delays when transmitting TOE=1 large frames". The impact is that frames lager than 2500-bytes for which TOE (i.e. TCP/IP hw accelerations like Tx csum) is enabled may see excess delay before start of transmission. This erratum was fixed in Rev 2.0. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09gianfar: Use mpc85xx support for errata detectionClaudiu Manoil
Use the macros and defines from mpc85xx.h to simplify and prevent errors in identifying a mpc85xx based SoC for errata detection. This should help enabling (and identifying) workarounds for various mpc85xx based chips and revisions. For instance, express MPC8548 Rev.2 as: (SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20) instead of: (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020) Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09gianfar: Enable eTSEC-A002 erratum w/a for all partsClaudiu Manoil
A002 is still in "no plans to fix" state, and applies to all the current P1/P2 parts as well, so it's resonable to enable its workaround by default, for all the soc's with etsec. The impact of not enabling this workaround for affected parts is that under certain conditons (runt frames or even frames with RX error detected at PHY level) during controller reset, the controller might fail to indicate Rx reset (GRS) completion. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-10-09Merge branch 'sfc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller
Ben Hutchings says: ==================== Some more fixes for EF10 support; hopefully the last lot: 1. Fixes for reading statistics, from Edward Cree and Jon Cooper. 2. Addition of ethtool statistics for packets dropped by the hardware before they were associated with a specific function, from Edward Cree. 3. Only bind to functions that are in control of their associated port, as the driver currently assumes this is the case. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08qlcnic: add missing destroy_workqueue() on error path in qlcnic_probe()Wei Yongjun
Add the missing destroy_workqueue() before return from qlcnic_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08moxa: fix the error handling in moxart_mac_probe()Wei Yongjun
This patch fix the error handling in moxart_mac_probe(): - return -ENOMEM in some memory alloc fail cases - add missing free_netdev() in the error handling case Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08xen-netback: transition to CLOSED when removing a VIFDavid Vrabel
If a guest is destroyed without transitioning its frontend to CLOSED, the domain becomes a zombie as netback was not grant unmapping the shared rings. When removing a VIF, transition the backend to CLOSED so the VIF is disconnected if necessary (which will unmap the shared rings etc). This fixes a regression introduced by 279f438e36c0a70b23b86d2090aeec50155034a9 (xen-netback: Don't destroy the netdev until the vif is shut down). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Paul Durrant <Paul.Durrant@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08net/mlx4_en: Fix pages never dma unmapped on rxAmir Vadai
This patch fixes a bug introduced by commit 51151a16 (mlx4: allow order-0 memory allocations in RX path). dma_unmap_page never reached because condition to detect last fragment in page is wrong. offset+frag_stride can't be greater than size, need to make sure no additional frag will fit in page => compare offset + frag_stride + next_frag_size instead. next_frag_size is the same as the current one, since page is shared only with frags of the same size. CC: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08net/mlx4_en: Rename name of mlx4_en_rx_alloc membersAmir Vadai
Add page prefix to page related members: @size and @offset into @page_size and @page_offset CC: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08net: sh_eth: Fix RX packets errors on R8A7740Nguyen Hong Ky
This patch will fix RX packets errors when receiving big size of data by set bit RNC = 1. RNC - Receive Enable Control 0: Upon completion of reception of one frame, the E-DMAC writes the receive status to the descriptor and clears the RR bit in EDRRR to 0. 1: Upon completion of reception of one frame, the E-DMAC writes (writes back) the receive status to the descriptor. In addition, the E-DMAC reads the next descriptor and prepares for reception of the next frame. In addition, for get more stable when receiving packets, I set maximum size for the transmit/receive FIFO and inserts padding in receive data. Signed-off-by: Nguyen Hong Ky <nh-ky@jinso.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08tun: don't look at current when non-blockingMichael S. Tsirkin
We play with a wait queue even if socket is non blocking. This is an obvious waste. Besides, it will prevent calling the non blocking variant when current is not valid. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08mrf24j40: Use level-triggered interruptsAlan Ott
The mrf24j40 generates level interrupts. There are rare cases where it appears that the interrupt line never gets de-asserted between interrupts, causing interrupts to be lost, and causing a hung device from the driver's perspective. Switching the driver to interpret these interrupts as level-triggered fixes this issue. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08mrf24j40: Use threaded IRQ handlerAlan Ott
Eliminate all the workqueue and interrupt enable/disable. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08mrf24j40: Move INIT_COMPLETION() to before packet transmissionAlan Ott
This avoids a race condition where complete(tx_complete) could be called before tx_complete is initialized. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-07can: dev: fix nlmsg size calculation in can_get_size()Marc Kleine-Budde
This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-07net/ethernet: cpsw: DT read bool dual_emacMarkus Pargmann
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-07net: ethernet: cpsw: Search childs for slave nodesMarkus Pargmann
The current implementation searches the whole DT for nodes named "slave". This patch changes it to search only child nodes for slaves. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-07 20:52:20 (GMT)