summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-03-20gianfar: Poll only active Rx queuesClaudiu Manoil
Split the napi budget fairly among the active queues only, instead of dividing it by the total number of Rx queues assigned to the given interrupt group. Use the h/w indication field RXFi in rstat (receive status register) to identify the active rx queues from the current interrupt group (i.e. receive event occured on ring i, if ring i is part of the current interrupt group). This indication field in rstat, RXFi i=0..7, allows us to find out on which queues of the same interrupt group do we have incomming traffic once we entered the polling routine for the given interrupt group. After servicing the ring i, the corresponding bit RXFi will be written with 1 to clear the active queue indication for that ring. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20gianfar: Fix tx napi pollingClaudiu Manoil
There are 2 issues with the current napi poll routine, with regards to tx ring cleanup: 1) for multi-queue devices (MQ_MG_MODE), should tx_bit_map != rx_bit_map, which is possible (and supported in h/w) if the DT property "fsl,tx-bit-map" holds a different value than rx_bit_map, the current polling routine will service the wrong Tx queues in this case (i.e. the interrupt group will receive interrupts from tx queues that it will not service) 2) Tx cleanup completion consumes napi budget, whereas the napi budget should be reserved for Rx work only. The patch fixes these issues and provides a clean napi polling routine. Napi poll completion is reached when all the Rx queues have been serviced and there is no Tx work to do. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Pull in the 'net' tree to get Daniel Borkmann's flow dissector infrastructure change. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20net: fec: Define indexes as 'unsigned int'Fabio Estevam
Fix the following warnings that happen when building with W=1 option: drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_free_buffers': drivers/net/ethernet/freescale/fec.c:1337:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_alloc_buffers': drivers/net/ethernet/freescale/fec.c:1361:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] drivers/net/ethernet/freescale/fec.c: In function 'fec_enet_init': drivers/net/ethernet/freescale/fec.c:1631:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20lpc_eth: fix error return code in lpc_eth_drv_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20sh_eth: check TSU registers ioremap() errorSergei Shtylyov
One must check the result of ioremap() -- in this case it prevents potential kernel oops when initializing TSU registers further on... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20sh_eth: fix bitbang memory leakSergei Shtylyov
sh_mdio_init() allocates pointer to 'struct bb_info' but only stores it locally, so that sh_mdio_release() can't free it on driver unload. Add the pointer to 'struct bb_info' to 'struct sh_eth_private', so that sh_mdio_init() can save 'bitbang' variable for sh_mdio_release() to be able to free it later... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-20ath6kl: fix size_t printf warningsKalle Valo
My new tracing code for ath6kl introduced these warnings on 64-bit: trace.h:38:1: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat] trace.h:61:1: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat] trace.h:84:1: warning: format '%d' expects argument of type 'int', but argument 6 has type 'size_t' [-Wformat] trace.h:119:1: warning: format '%d' expects argument of type 'int', but argument 7 has type 'size_t' [-Wformat] trace.h:173:1: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat] trace.h:193:1: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat] trace.h:221:1: warning: format '%d' expects argument of type 'int', but argument 5 has type 'size_t' [-Wformat] Fix them by using %zd. Reported-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-19net/smsc911x: Use NULL instead of integer for pointerSachin Kamat
Silences the following sparse warning: drivers/net/ethernet/smsc/smsc911x.c:2145:30: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Fix byte-order of IEEE addressAlan Ott
Load the 64-bit Extended (IEEE) address into the hardware in the proper byte order. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Increase max SPI speed to 10MHzAlan Ott
Upon consulting the datasheet further, it does indicates a maximum speed for SCK at 10MHz. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: Warn if transmit interrupts timeoutAlan Ott
Issue a warning if a transmit complete interrupt doesn't happen in time. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-19mrf24j40: pinctrl supportAlan Ott
Activate pinctrl settings when used with a DT system. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18rt2800: 5592: add more USB devices IDsStanislaw Gruszka
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: iq calibration for 5GHzStanislaw Gruszka
Based on: RT5592_IQCalibration() DPO_RT5572_LinuxSTA_2.6.1.3_20121022/cips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add KconfigStanislaw Gruszka
Enable support to 5592 chip. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: TXWI & RXWI descriptors sizeStanislaw Gruszka
Based on: TXWI_STRUC RXWI_STRUC from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/chip/rtmp_mac.h Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add chip specific vgc calculationsStanislaw Gruszka
Based on: RT5592_ChipAGCAdjust() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add AGC initStanislaw Gruszka
Based on: RT5592_RTMPAGCInit() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: add write_with_rx_chain functionStanislaw Gruszka
Based on: AsicBBPWriteWithRxChain() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: rearrange bbp/rfcsr initializationStanislaw Gruszka
This makes order of initialization of various registers similar like on vendor driver. Based on: NICInitializeAsic() RT5592LoadRFNormalModeSetup() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chip/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add iq calibrationStanislaw Gruszka
Based on: GetIQCalibration() IQCalibration() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: more channel switch registers settings (BBP & GLRT)Stanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: enable rf initStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: setup LDO_CFG0 when configuring channelStanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: init frequency calibrationStanislaw Gruszka
Based on: InitFrequencyCalibrationMode() RT5592_ChipCap from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/frq_cal.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initialize RF_38/39/30 registersStanislaw Gruszka
Based on: RT5592LoadRFNormalModeSetup() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initialize BBP_R138 registerStanislaw Gruszka
Based on: RT5592LoadRFNormalModeSetup() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initalize BBP_R103 register on new revisionsStanislaw Gruszka
Based on: NICInitRT5592RFRegisters() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: initalize RF_R27 on older revisionsStanislaw Gruszka
Based on: NICInitRT5592RFRegisters() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: RF early registers initializationStanislaw Gruszka
Based on: NICInitRT5592RFRegisters() RF5592Reg_2G_5G[] from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c This patch also merge common frequency adjustment (RF_R17 settings) code. Further work is needed, to setup more RF/BBP/MAC registers after that. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: common BBP initializationStanislaw Gruszka
Add BBP registers initialization common with other chipsets, but for now performed only for 5592. Based on: NICInitBBP() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: BBP registers initializationStanislaw Gruszka
Based on: NICInitRT5592BbpRegisters() NICInitBBP() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: MAC registers initalizationStanislaw Gruszka
Based on: NICInitRT5592MacRegisters() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c On vendor driver we do not initialize TX_SW_CFG{1,2}. However the same difference is between rt2x00 and vendor driver for 5390 chip. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: channel config stubStanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: add channels tableStanislaw Gruszka
Based on: RT5592_ChipSwitchChannel() RT5592_Frequency_Plan_Xtal20M[] RT5592_Frequency_Plan_Xtal40M[] from: DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: 5592: early definesStanislaw Gruszka
Add basic defines for 5592 chip. It can not be enabled until CONFIG_RT2800USB_RT55XX configuration option will be provided in the Kconfig. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2800: do not crash if spec->channels is NULLStanislaw Gruszka
In case the spec->channels was not specified, print warning instead of hard crash the kernel. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2x00: Fix tx status reporting for reordered frames in rt2800pciHelmut Schaa
rt2800 hardware sometimes reorders tx frames when transmitting to multiple BA enabled STAs concurrently. For example a tx queue [ STA1 | STA2 | STA1 | STA2 ] can result in the tx status reports [ STA1 | STA1 | STA2 | STA2 ] when the hw decides to put the frames for STA1 in one AMPDU. To mitigate this effect associate the currently processed tx status to the first frame in the tx queue with a matching wcid. This patch fixes several problems related to incorrect tx status reporting. Furthermore the tx rate selection is much more stable when communicating with multiple STAs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18rt2x00: Revert "rt2x00: remove unused argument"Helmut Schaa
This reverts commit db36f792370959ff26458f80942cf98fe8249d95 since I'm going to use the data pointer that was removed in a follow up patch. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: cleanup VHT capYogesh Ashok Powar
Firmware returned VHT cap has the same format that cfg80211 expects. There is no need to parse the vht cap from the firmware and then set it to ieee80211_sta_vht_cap. Just copying is sufficient. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18Merge tag 'for-linville-20130318' of git://github.com/kvalo/ath6klJohn W. Linville
2013-03-18rtlwifi: usb: add missing freeing of skbuffJussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: cancel cmd timer and free curr_cmd in shutdown processBing Zhao
curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: skip pending commands after function shutdownBing Zhao
During rmmod mwifiex_sdio processing FUNC_SHUTDOWN command is sent to firmware. Firmware expcets only FUNC_INIT once WLAN function is shut down. Any command pending in the command queue should be ignored and freed. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: fix race when queuing commandsAmitkumar Karwar
Running the following script repeatedly on XO-4 with SD8787 produces command timeout and system lockup. insmod mwifiex_sdio.ko sleep 1 ifconfig eth0 up iwlist eth0 scan & sleep 0.5 rmmod mwifiex_sdio mwifiex_send_cmd_async() is called for sync as well as async commands. (mwifiex_send_cmd_sync() internally calls it for sync command.) "adapter->cmd_queued" gets filled inside mwifiex_send_cmd_async() routine for both types of commands. But it is used only for sync commands in mwifiex_wait_queue_complete(). This could lead to a race when two threads try to queue a sync command with another sync/async command simultaneously. Get rid of global variable and pass command node as a parameter to mwifiex_wait_queue_complete() to fix the problem. Cc: <stable@vger.kernel.org> # 3.8 Reported-by: Daniel Drake <dsd@laptop.org> Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k: limit tx path hang check to normal data queuesFelix Fietkau
The beacon and multicast-buffer queues are managed by the beacon tasklet, and the generic tx path hang check does not help in any way here. Running it on those queues anyway can introduce some race conditions leading to unnecessary chip resets. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k_hw: revert chainmask to user configuration after calibrationFelix Fietkau
The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18iwl3945: fix length of dma buffersStanislaw Gruszka
commit bdb084b22d8aee66c87af5e9c36bd6cf7f3bccfd Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Wed Feb 13 15:49:08 2013 +0100 iwlegacy: more checks for dma mapping errors broke il3945_tx_skb() dma buffer length settings, what results on firmware errors like showed below and make 3945 device non usable. iwl3945 0000:02:00.0: Microcode SW error detected. Restarting 0x82000008. iwl3945 0000:02:00.0: Loaded firmware version: 15.32.2.9 iwl3945 0000:02:00.0: Start IWL Error Log Dump: iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1 iwl3945 0000:02:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line iwl3945 0000:02:00.0: SYSASSERT (0x5) 0000208934 0x008B6 0x0035E 0x00320 0x00000 267 iwl3945 0000:02:00.0: Error Reply type 0x00000001 cmd Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18bnx2x: fix occasional statistics off-by-4GB errorMaciej Żenczykowski
The UPDATE_QSTAT function introduced on February 15, 2012 in commit 1355b704b9ba "bnx2x: consistent statistics after internal driver reload" incorrectly fails to handle overflow during addition of the lower 32-bit field of a stat. This bug is present since 3.4-rc1 and should thus be considered a candidate for stable 3.4+ releases. Google-Bug-Id: 8374428 Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: Mintz Yuval <yuvalmin@broadcom.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-07-27 14:21:59 (GMT)