summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-11-07forcedeth: remove unneeded stats updatesdavid decotigny
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Acknowledge only interrupts that are being processedMike Ditto
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: fix race when unloading moduledavid decotigny
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07usbnet: fix oops in usbnet_start_xmitKonstantin Khlebnikov
This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e SKB can be NULL at this point, at least for cdc-ncm. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07ixgbe: Fix compile for kernel without CONFIG_PCI_IOV definedRose, Gregory V
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params()Jesper Juhl
If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07brcm80211: smac: eliminate a null pointer dereference in dma.cArend van Spriel
Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall <julia@diku.dk> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07b43: HT-PHY: report signal to mac80211Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07b43: fill ctl1 word on all newer PHYs, fix PHY errorsRafał Miłecki
This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-07Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scsi: drop unused Kconfig symbol pci: drop unused Kconfig symbol stmmac: drop unused Kconfig symbol x86: drop unused Kconfig symbol powerpc: drop unused Kconfig symbols powerpc: 40x: drop unused Kconfig symbol mips: drop unused Kconfig symbols openrisc: drop unused Kconfig symbols arm: at91: drop unused Kconfig symbol samples: drop unused Kconfig symbol m32r: drop unused Kconfig symbol score: drop unused Kconfig symbols sh: drop unused Kconfig symbol um: drop unused Kconfig symbol sparc: drop unused Kconfig symbol alpha: drop unused Kconfig symbol Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig as per Michal: the STMMAC_DUAL_MAC config variable is still unused and should be deleted.
2011-11-07Merge branch 'stable/vmalloc-3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: net: xen-netback: use API provided by xenbus module to map rings block: xen-blkback: use API provided by xenbus module to map rings xen: use generic functions instead of xen_{alloc, free}_vm_area()
2011-11-07Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-04bonding: comparing a u8 with -1 is always falseDan Carpenter
slave->duplex is a u8 type so the in bond_info_show_slave() when we check "if (slave->duplex == -1)", it's always false. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04sky2: fix regression on Yukon Optimastephen hemminger
Changes to support other Optima types, introduced an accidental regression that caused 88E8059 to come up in 10Mbit/sec. The Yukon Optima supports a reverse auto-negotiation feature that was incorrectly setup, and not needed. The feature could be used to allow wake-on-lan at higher speeds. But doing it correctly would require other changes to initialization. Reported-by: Pavel Mateja <pavel@netsafe.cz> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04i825xx:xscale:8390:freescale: Fix Kconfig dependanciesJeff Kirsher
i825xx and xscale are "sub" Kconfigs to NET_VENDOR_INTEL, so NET_VENDOR_INTEL should contain ALL the dependencies of the "sub" Kconfigs. Same with 8390 is a "sub" Kconfig to NET_VENDOR_NATSEMI, so NET_VENDOR_NATSEMI needs to contains ALL the dependencies. Freescale Kconfig only had fs_enet as a sub Kconfig, and already contained the needed dependencies, just cleaned up the dependencies. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04macvlan: receive multicast with local addressstephen hemminger
When implementing VRRP v2 using macvlan several problems were discovered. VRRP is weird in that all routers participating in a redundant group use the same virtual MAC address. Macvlan is a natural driver to use for this but it doesn't work. The problem is that packets with a macvlan device's source address are not received. The problem is actually a regression that date back almost 2 years now. The original problems started with: commit 618e1b7482f7a8a4c6c6e8ccbe140e4c331df4e9 Author: Arnd Bergmann <arnd@arndb.de> Date: Thu Nov 26 06:07:10 2009 +0000 macvlan: implement bridge, VEPA and private mode This patches restores the original 2.6.32 behavior. Allowing multicast packets received with the VRRP source address to be received. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Update version to 3.121Matt Carlson
This patch updates the tg3 version to 3.121. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Eliminate timer race with reset_taskMatt Carlson
During shutdown, it is impossible to reliably disable the timer and reset_task threads. Each thread can schedule the other, which leads to shutdown code that chases its tail. To fix the problem, this patch removes the ability of tg3_reset_task to schedule a new timer thread. To support this change, tg3_timer no longer terminates itself, but rather goes into a polling mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Schedule at most one tg3_reset_task runMatt Carlson
It is possible for multiple threads in the tg3 driver to each attempt to schedule a run of tg3_reset_task(). The multiple tg3_reset_task executions could all wind up on the same queue (and execute serially) or wind up on the queues of another processor (which could execute in parallel). Either scenario is not what was truly desired. This patch adds a new flag, TG3_FLAG_RESET_TASK_PENDING, and uses it to determine whether or not to schedule another run of tg3_reset_task(). With the new flag comes two new functions to facilitate scheduling and descheduling of tg3_reset_task(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Obtain PCI function number from deviceMatt Carlson
This patch adds code to attempt to obtain the PCI function number from the device rather than accept the number handed by the kernel. In pass-through scenarios, the function number handed by the kernel may not reflect the true function of the device. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Fix irq alloc error cleanup pathMatt Carlson
This patch fixes a bug where the irq error cleanup path did not free all the resources it allocated. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Ben Li <benli@broadcom.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Fix 4k skb error recovery pathMatt Carlson
On the error recovery resource unwind path, it is possible for the driver to attempt to unmap a fragment that hadn't been mapped. This patch fixes the problem by correcting the "last" parameter supplied. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Fix 4k tx bd segmentation codeMatt Carlson
The new 4k tx bd segmentation code had a bug in the error cleanup path. If the driver did not map all the physical fragments, the abort path would wind up advancing the producer index beyond the point where the setup code stopped. This would ultimately turn into a tx recovery error where the driver would expect the skb pointer to be set when it isn't. This patch fixes the problem, and then makes the code a little easier to understand. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04tg3: Fix APE mutex init and useMatt Carlson
APE mutex register blocks are shared by all ports of multiport devices. For some mutexing purposes, each function is assigned their own register. For other cases, each function is assigned its own request and grant bits of a single register. For the latter cases, the tg3 driver is incorrectly allowing each function to use the same set of grant / request bits. This patch fixes the code so that each function uses the appropriate bitset. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) be2net: Add detect UE feature for Lancer be2net: Prevent CQ full condition for Lancer be2net: Fix disabling multicast promiscous mode be2net: Fix endian issue in RX filter command af_packet: de-inline some helper functions MAINTAINERS: Add can-gw include to maintained files net: Add back alignment for size for __alloc_skb net: add missing bh_unlock_sock() calls l2tp: fix race in l2tp_recv_dequeue() ixgbevf: Update release version ixgbe: DCB, return max for IEEE traffic classes ixgbe: fix reading of the buffer returned by the firmware ixgbe: Fix compiler warnings ixgbe: fix smatch splat due to missing NULL check ixgbe: fix disabling of Tx laser at probe ixgbe: Fix link issues caused by a reset while interface is down igb: Fix for I347AT4 PHY cable length unit detection e100: make sure vlan support isn't advertised on old adapters e1000e: demote a debugging WARN to a debug log message net: fix typo in drivers/net/ethernet/xilinx/ll_temac_main.c ...
2011-11-04be2net: Add detect UE feature for LancerPadmanabh Ratnakar
Add code to detect UE in case of Lancer. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04be2net: Prevent CQ full condition for LancerPadmanabh Ratnakar
Indicate to HW that the CQ is cleaned up before posting new RX buffers. This prevents the HW to go into CQ full error condition. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04be2net: Fix disabling multicast promiscous modePadmanabh Ratnakar
If user tries to disable multicast promiscous mode, the adapter remains in this mode as resetting the multicast promiscous mode was missing in RX filter command. Fixed this. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-04be2net: Fix endian issue in RX filter commandPadmanabh Ratnakar
Use cpu_to_le32() for mcast_num field in RX filter command as this field is of type u32. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-02ixgbevf: Update release versionGreg Rose
Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: DCB, return max for IEEE traffic classesJohn Fastabend
Returning the max traffic classes on get requests simplifies user space configurations because applications will know explicitly how many traffic classes can be used. Typical switch implementations use 2 or 3 traffic classes so this not seen often today. And user space can learn the number of traffic classes by return codes but this allows user space to configure ixgbe correctly at the start. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: fix reading of the buffer returned by the firmwareEmil Tantilov
This patch fixes some issues found in the buffer read portion of ixgbe_host_interface_command() - use `bi` as the buffer index counter instead of `i` - add conversion to native cpu byte ordering on register read - fix conversion from bytes to dword - use dword_len instead of buf_len when reading the register Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: Fix compiler warningsGreg Rose
Wrap SR-IOV specific functions in CONFIG_PCI_IOV to avoid compiler warnings. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: fix smatch splat due to missing NULL checkJohn Fastabend
ixgbe_ieee_ets and ixgbe_ieee_pfc are intialized at the same time. Do a check for both before configuring IEEE802.1Qaz. Also max_frame was causing a sparse warning resolved here as well. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: fix disabling of Tx laser at probeEmil Tantilov
register_netdev() calls ndo_set_features() which may result in HW reset which in turn will bring the laser back up. This patch moves ixgbe_laser_tx_disable() below register_netdev() in ixgbe_probe() to make sure laser is shut off on load. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02ixgbe: Fix link issues caused by a reset while interface is downEmil Tantilov
Interface fails to obtain link on 82599 SFP in the following scenario: 1. Set advertised speed to GB: ethtool -s eth0 advertise 0x20 2. Bring interface down ip link set eth0 down 3. Issue any command that leads to a reset: ethtool -t eth0 4. Bring link back up: ip link set eth0 up Following patch makes sure that the driver flaps the Tx laser every time ixgbe_start_hw() is called, and not only when the speed is set. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02igb: Fix for I347AT4 PHY cable length unit detectionKantecki, Tomasz
The PHY cable length unit detection was not using the correct the correct PHY data variable for I347AT4. Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02e100: make sure vlan support isn't advertised on old adaptersJesse Brandeburg
e100 parts don't support vlan offload but they generally do allow use of vlans in higher software layers via the 8021q module. That said, there are a couple of really old revisions of e100 hardware that don't even allow the longer frame sizes required for vlan use with standard MTU. Use the VLAN_CHALLENGED flag to prevent vlan binding to these devices. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Michael Tokarev <mjt@tls.msk.ru> CC: David Lamparter <equinox@diac24.net> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02e1000e: demote a debugging WARN to a debug log messageBruce Allan
This debugging message was recently added but it does not need to be as alarming as a WARN. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-02Merge branch 'akpm' (Andrew's incoming - part two)Linus Torvalds
Says Andrew: "60 patches. That's good enough for -rc1 I guess. I have quite a lot of detritus to be rechecked, work through maintainers, etc. - most of the remains of MM - rtc - various misc - cgroups - memcg - cpusets - procfs - ipc - rapidio - sysctl - pps - w1 - drivers/misc - aio" * akpm: (60 commits) memcg: replace ss->id_lock with a rwlock aio: allocate kiocbs in batches drivers/misc/vmw_balloon.c: fix typo in code comment drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop w1: disable irqs in critical section drivers/w1/w1_int.c: multiple masters used same init_name drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal drivers/power/ds2780_battery.c: add a nolock function to w1 interface drivers/power/ds2780_battery.c: create central point for calling w1 interface w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it pps gpio client: add missing dependency pps: new client driver using GPIO pps: default echo function include/linux/dma-mapping.h: add dma_zalloc_coherent() sysctl: make CONFIG_SYSCTL_SYSCALL default to n sysctl: add support for poll() RapidIO: documentation update drivers/net/rionet.c: fix ethernet address macros for LE platforms RapidIO: fix potential null deref in rio_setup_device() RapidIO: add mport driver for Tsi721 bridge ...
2011-11-02drivers/net/rionet.c: fix ethernet address macros for LE platformsAlexandre Bounine
Modify Ethernet addess macros to be compatible with BE/LE platforms Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Chul Kim <chul.kim@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: <stable@kernel.org> [2.6.39+] Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02Merge git://github.com/rustyrussell/linuxLinus Torvalds
* git://github.com/rustyrussell/linux: virtio-blk: use ida to allocate disk index virtio: Add platform bus driver for memory mapped virtio device virtio: Dont add "config" to list for !per_vq_vector virtio: console: wait for first console port for early console output virtio: console: add port stats for bytes received, sent and discarded virtio: console: make discard_port_data() use get_inbuf() virtio: console: rename variable virtio: console: make get_inbuf() return port->inbuf if present virtio: console: Fix return type for get_inbuf() virtio: console: Use wait_event_freezable instead of _interruptible virtio: console: Ignore port name update request if name already set virtio: console: Fix indentation virtio: modify vring_init and vring_size to take account of the layout containing *_event_idx virtio.h: correct comment for struct virtio_driver virtio-net: Use virtio_config_val() for retrieving config virtio_config: Add virtio_config_val_len() virtio-console: Use virtio_config_val() for retrieving config
2011-11-02iwlwifi: don't perform "echo test" when cmd queue stuckWey-Yi Guy
Perform "echo test" when cmd queue stuck detected, somethime it will cause calltrace. I am not sure how to fix it yet, just remove the action now until find a better way to handle it. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02b43: Remove unneeded messageLarry Finger
The driver can spam the logs with "RX: Packet dropped" messages. These drops originate from 1. a correpted PLCP, 2. decryption errors, and 3. packet size underruns. Condition #3 logs a separate message, thus no dropped message is needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02iwlwifi: allow pci_enable_msi failWey-Yi Guy
Continue the init process even fail to enable msi out_iounmap is no longer used, remove it Reported-by: werner <w.landgraf@ru.ru> Tested-by: werner <w.landgraf@ru.ru> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02libertas: ensure we clean up a scan request properlyAndres Salomon
Commit 2e30168b ("libertas: terminate scan when stopping interface") adds cleanup code to lbs_eth_stop to call cfg80211_scan_done if there's an outstanding cfg80211_scan_request. However, it assumes that the scan request was allocated via the cfg80211 stack. Libertas has its own internal allocation method, kept track of with priv->internal_scan. This doesn't set scan_req->wiphy, amongst other things, which results in hitting a BUG() when we call cfg80211_scan_done on the request. This provides a function to take care of the low-level scan_req cleanup details. We simply call that to deal with finishing up scan requests. The bug we were hitting was: [ 964.321495] kernel BUG at net/wireless/core.h:87! [ 964.329970] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 964.341963] pgd = dcf80000 ... [ 964.849998] 9fe0: 00000000 beb417b8 4018e280 401e822c 60000010 00000004 00000000 00000000 [ 964.865007] [<c003104c>] (__bug+0x1c/0x28) from [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) [ 964.895324] [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) from [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) [ 964.895324] [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) from [<c03002a0>] (__dev_close_many+0x94/0xc4) [ 964.918995] [<c03002a0>] (__dev_close_many+0x94/0xc4) from [<c030037c>] (dev_close_many+0x78/0xe0) Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-02ath9k_hw: Fix noise floor calibration timeout on fast channel changeRajkumar Manoharan
During the fast channel change noise floor values are being loaded twice at init_cal and after channel_change. The commit "ath9k_hw: Improve fast channel change for AR9003 chips" overlooked it that caused failure to load nf while doing bgscan. This patch performs noise floor calibration after the fast and full reset. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-10 05:31:15 (GMT)