summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-08-25drivers/net: Remove address use from assignments of function pointersJoe Perches
"foo = &function" is more commonly written "foo = function" Done with coccinelle script: // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> drivers/net/tehuti.c used a function and struct with the same name, the function was renamed. Compile tested x86 only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25qlcnic: change reg nameAmit Kumar Salecha
Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match document. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25qlcnic: fix fw recovery for PFAmit Kumar Salecha
Privilege function should wait for npar state to be operational before creating context. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25qlcnic: support port vlan idAmit Kumar Salecha
On NIC Partition capable adapter, Administrator can configure to tag packet with particular vlan id. Packet will be tagged and strip with that vlan id. Also if 'Tagging' flag is disable, other packet will be drop. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25qlcnic: eswitch config fixesRajesh Borundia
o remove validation before deleting vlan id o Add missing 'break' while deleting vlan id. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_sdio.c
2010-08-24mlx4_en: Fix build warning in mlx4_en_create_rx_ring.David S. Miller
drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’: drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: updated driver versionYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Moving to work with GROYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: UDP RSS supportYevgeny Petrilin
Adding capability for RSS for UDP traffic, hashing is done based on IP addresses and UDP port number. The support depends on HW/FW capabilities. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: reconfiguring mac address.Yevgeny Petrilin
When Mac address is removed from one port of the CX2 device, the other device should reconfigure its Mac. This fixes an issue with failover, when both ports have the same Mac address, and one of the ports, is closed, the second one stops receiving traffic. (bugzilla #1965 at bugs.openfabrics.org) Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: get/set ringsize uses actual ring sizeYevgeny Petrilin
In case that the rings were not fully filled, the report in Ethtool should be according to the actual size that was filled. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixing report in Ethtool get_settingsYevgeny Petrilin
The report now based on query from FW, giving the correct tranciever type and link speed. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Added self diagnostics test implementationYevgeny Petrilin
The selftest includes 5 features: 1. Interrupt test: Executing commands and receiving command completion on all our interrupt vectors. 2. Link test: Verifying we are connected to valid link partner. 3. Speed test: Check that we negotiated link speed correctly. 4. Registers test: Activate HW health check command. 5. Loopback test: Send a packet on loopback interface and catch it on RX side. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Validate port up prior to transmittingYevgeny Petrilin
We might try to use resources which were not activated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Reporting link state with KERN_INFOYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixed MAX_TX_RINGS definitionYevgeny Petrilin
Defined as sum of default number of TX rings and number of rings used for priority flow control mode. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: performing CLOSE_PORT at the end of tear-down processYevgeny Petrilin
All port's resources should be closed before we give the CLOSE_PORT command to the firmware. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Setting dev->perm_addr fieldYevgeny Petrilin
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Setting actual RX ring sizeYevgeny Petrilin
When configuring HW resources, the RX ring size that is passed should be the actual size that depends on number of buffers that we succeeded to allocate. The mask for ring size should also be configured accordingly Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24mlx4_en: Fixed incorrect unmapping on RX flow.Yevgeny Petrilin
When allocating new fragments to replace the ones that would be passed to the stack, The fragments that should be replaced, are the ones that were already used. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h
2010-08-24iwlwifi: do not spuriously call ieee80211_scan_completedJohannes Berg
When a scan is aborted because the corresponding virtual interface is removed, we may still later attempt to tell mac80211 that the scan completed. This is obviously wrong, since we already told it that it was aborted, so don't do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlagn: do not check for AP mode for WEP keysJohannes Berg
Even when we configure WEP keys in AP mode ones without a station pointer are default keys, so don't check for AP mode here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_htc: Add support for bluetooth coexistence.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_common: Move bt_stomp to common for sharing with ath9k_htc.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: wait for join command complete eventGrazvydas Ignotas
Poll for join command completion instead of waiting blindly for 10 msecs. There is a timeout of 100 msecs, if the command doesn't complete by then, we return an error code. Based on wl1271 patch 99d84c1de8fdf5f9b09f07fdbc628857a040bf8b by Luciano Coelho. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: fix beacon filter table structureGrazvydas Ignotas
The beacon filter table configuration ACX structure had certain elements reversed, fix it to match TI driver. Based on wl1271 patch 1937e742639c03a6fe77239c3003ce9602302117 by Juuso Oikarinen. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: fix event handling mechanismGrazvydas Ignotas
In case both A and B events occured simultaneously, current code would only process A and clear both interrupts. Make it process both events instead. Based on wl1271 patches by Juuso Oikarinen: 1fd2794f36913992798184c464fe8f85753b13e0 13f2dc52c69bcca074cd12d4806953b2af45c386 Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24wl1251: add missing __packed modifier for some structsGrazvydas Ignotas
Several acx and cmd structures are missing __packed modifier, add it. This was noticed while comparing them with corresponding wl1271 code. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: move debug options into submenuJay Sternberg
more debug options being added so it is useful to move them into a submenu for ease of readability when using config commands like make menuconfig and make xconfig Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: enable experimental ucode supportJay Sternberg
ucode firmware may need to be released as experimental for testing or debugging. released ucode filenames have the API version as the last component. experimental ucode files will have that component be "exp" and the fw_version string reported by ethtool will also contain the string EXP to clearly identify this ucode from released ucode. EXP is short for EXPERIMENTAL since fw_version has a max lenght on 32. this capability is controlled by Kconfig and defaulted to not be used. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: remove unused iwl_send_card_state functionWey-Yi Guy
iwl_send_card_state() is not being call from anywhere, remove it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: configurable ampdu factor and densityWey-Yi Guy
Add ampdu factor and density to .cfg, this allow both parameters can be configure per device based. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: more generic name for rssi calc in iwlagnWey-Yi Guy
Change the define to more generic naming to match _agn devices since the rssi calculation are common function for 5000 series and up Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: additional parameter in REPLY_RX_PHY_CMDWey-Yi Guy
Adding additional parameter in REPLY_RX_PHY_CMD, frame_time indicate the frame's time on the air based on byte count and frame rate calculation Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlagn: continue perform rate scale when error detectedWey-Yi Guy
If for some reason, the actual link command not matching neither active nor search table; instead of return and not performing rate scale, by-pass the data collection and continue the rate scale process. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlagn: adjust starting action for rate scaleWey-Yi Guy
During rate scale, reset starting action after making action adjustment to avoid the possibility of break out of loop too early. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: refactor iwl_setup_rxon_timingJohannes Berg
All callers of iwl_setup_rxon_timing() also send the command right away, so rename the function to iwl_send_rxon_timing() and move the sending into it. Also, some callers clear the data, this can be done always and thus moved in as well. Finally, there's no reason for the function to acquire the spinlock, but it should be called with the mutex held, so assert that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: cleanup iwl_set_rxon_channel()Shanyu Zhao
Update outdated comments of iwl_set_rxon_channel() to reflect the current signature. Also remove the unnecessary validation of the channel. Those channel info are constructed in iwlwifi driver and mac80211 will never modify the content of the struct. Also everytime before this function is called the channel info has been validated already (as a paranoid check). Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: avoid race condition in channel changeShanyu Zhao
When iwl_mac_config() is called by mac80211, the channel pointer hw->conf->channel can potentially change, resulting in mismatch band and channel number when configuring RXON command. To avoid this situation, save the channel pointer in local variables and validate the channel before using it. Note that priv->mutex is locked during the whole function so the local variables are safe. Same change is applied to iwl_mac_channel_switch() since basically it copies code from iwl_mac_config(). Also removed an outdated comment in the flow. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: do not call ieee80211_frequency_to_channelShanyu Zhao
A few cases in iwlwifi driver function ieee80211_frequency_to_channel() is called to get channel number from center frequency. This is not needed since the channel number is already saved in hw_value field of struct ieee80211_channel in function iwlcore_init_geos(). So replace those function calls with hw_value field of struct ieee80211_channel. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: make aggregation time limit configurableWey-Yi Guy
By default, aggregation time limit is 4000 uSec, add the parameter to .cfg to allow this parameter can be configure per device base if needed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: max/min aggregation time limitWey-Yi Guy
Set the minimum and maximum for aggregation time limit in uSec. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: additional comments in iwl_cfgWey-Yi Guy
No functional changes, just add additional comments to iwl_cfg structure Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: remove unused defineWey-Yi Guy
IWL_SIXTY_SECS is not been used, remove it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24Hostap: Fix "'ret' set but not used" warning message from GCC in hostapJulian Calaby
CC [M] drivers/net/wireless/hostap/hostap_ioctl.o drivers/net/wireless/hostap/hostap_ioctl.c: In function 'prism2_request_scan': drivers/net/wireless/hostap/hostap_ioctl.c:1666:6: warning: variable 'ret' set but not used Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: fix thermal throttling related power management operationWey-Yi Guy
The current approach is very broken because it adds an often-used code path that will not initialise "cmd" at all. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Shanyu Zhao <shanyu.zhao.intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24mac80211-hwsim: allow configuring IBSSJohannes Berg
It will not look standard-compliant in a sniffer because because it doesn't * sync TSF * adjust the TSF in beacons * send beacons at TBTT * cancel beacons when another phy sends However, it does allow testing the configuration and parts of the mac80211 code for IBSS and as such is still useful. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24p54: improve eeprom parserChristian Lamparter
Like other vendors, p54* devices have a checksum for the EEPROM descriptor data. This patch enhances the parser code to generate and verify the data fields, before initializing the radio-chip on the card. Note: If you have to bootstrap an alternative EEPROM image for your device and you don't know how to generate a valid crc ccitt checksum, you should take a look at: http://git.kernel.org/?p=linux/kernel/git/chr/p54tools.git The "checksum" utility loads a binary p54 EEPROM blob (use the -f switch, to skip the check) and applies the correct crc automatically. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>