summaryrefslogtreecommitdiff
path: root/drivers/pci/probe.c
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-12-07Merge branch 'pci/bjorn-pcie-cap' into nextBjorn Helgaas
* pci/bjorn-pcie-cap: ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names PCI: Add and use standard PCI-X Capability register names
2012-12-07PCI: Use standard PCIe Capability Link register field namesBjorn Helgaas
Use the standard #defines for PCIe Link Status and Capability registers rather than bare numbers. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-05PCI: Add and use standard PCI-X Capability register namesBjorn Helgaas
Add and use #defines for PCI-X Capability registers and fields. Note that the PCI-X Capability has a different layout for type 0 (endpoint) and type 1 (bridge) devices. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-28PCI: Remove __dev* markingsBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p, __devint, __devinitdata, __devinitconst, and _devexit are no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28PCI: Remove CONFIG_HOTPLUG ifdefsBill Pemberton
Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-13Merge branch 'pci/don-sriov' into nextBjorn Helgaas
* pci/don-sriov: PCI: Remove useless "!dev" tests PCI: Use spec names for SR-IOV capability fields PCI: Provide method to reduce the number of total VFs supported PCI: SRIOV control and status via sysfs PCI: Use is_visible() with boot_vga attribute for pci_dev PCI: Add pci_device_type to pdev's device struct
2012-11-10PCI: Add pci_device_type to pdev's device structYinghai Lu
Need type filled in device structure so it can be used for visible attribute control in sysfs for pci_dev. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-03PCI: Move out pci_enable_bridges out of assign_unsigned_bus_resYinghai Lu
So could use assign_unassigned_bus_res pci root bus add Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-03PCI: Move pci_rescan_bus() back to probe.cYinghai Lu
We have pci_assign_unassigned_bus_resources() in as global function now. Move pci_rescan_bus() back to probe.c where it should be. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-24Merge branch 'pci/yinghai-misc' into nextBjorn Helgaas
2012-09-18PCI: Check P2P bridge for invalid secondary/subordinate rangeYinghai Lu
For bridges with "secondary > subordinate", i.e., invalid bus number apertures, we don't enumerate anything behind the bridge unless the user specified "pci=assign-busses". This patch makes us automatically try to reassign the downstream bus numbers in this case (just for that bridge, not for all bridges as "pci=assign-busses" does). We don't discover all the devices on the Intel DP43BF motherboard without this change (or "pci=assign-busses") because its BIOS configures a bridge as: pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode) [bhelgaas: changelog, change message to dev_info] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18412 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=625754 Reported-by: Brian C. Huffman <bhuffman@graze.net> Reported-by: VL <vl.homutov@gmail.com> Tested-by: VL <vl.homutov@gmail.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2012-09-13Merge branch 'pci/trivial' into nextBjorn Helgaas
* pci/trivial: PCI: Drop duplicate const in DECLARE_PCI_FIXUP_SECTION PCI: Drop bogus default from ARCH_SUPPORTS_MSI PCI: cpqphp: Remove unreachable path PCI: Remove bus number resource debug messages PCI/AER: Print completion message at KERN_INFO to match starting message PCI: Fix drivers/pci/pci.c kernel-doc warnings
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-08-24PCI: Remove bus number resource debug messagesBjorn Helgaas
These messages don't seem to add much value. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23PCI: Don't print anything while decoding is disabledBjorn Helgaas
If we try to print to the console device while its decoding is disabled, the system will hang. Reported-and-tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-08-23PCI/core: Use PCI Express Capability accessorsJiang Liu
Use PCI Express Capability access functions to simplify core. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23PCI: Remove unused field pcie_type from struct pci_devYijing Wang
With introduction of pci_pcie_type(), pci_dev->pcie_type field becomes redundant, so remove it. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23PCI: Introduce pci_pcie_type(dev) to replace pci_dev->pcie_typeYijing Wang
Introduce an inline function pci_pcie_type(dev) to extract PCIe device type from pci_dev->pcie_flags_reg field, and prepare for removing pci_dev->pcie_type. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-20PCI: Add pcie_flags_reg to cache PCIe capabilities registerYijing Wang
Since PCI Express Capabilities Register is read only, cache its value into struct pci_dev to avoid repeatedly calling pci_read_config_*(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-10Merge branch 'pci/bjorn-p2p-bridge-windows' into nextBjorn Helgaas
* pci/bjorn-p2p-bridge-windows: sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases() PCI: support sizing P2P bridge I/O windows with 1K granularity PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2) PCI: allow P2P bridge windows starting at PCI bus address zero Conflicts: drivers/pci/probe.c include/linux/pci.h
2012-07-10Merge branch 'pci/bjorn-disable-decode' into nextBjorn Helgaas
* pci/bjorn-disable-decode: PCI: disable MEM decoding while updating 64-bit MEM BARs PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
2012-07-10PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)Bjorn Helgaas
9d265124d051 and 15a260d53f7c added quirks for P2P bridges that support I/O windows that start/end at 1K boundaries, not just the 4K boundaries defined by the PCI spec. For details, see the IOBL_ADR register and the EN1K bit in the CNF register in the Intel 82870P2 (P64H2). These quirks complicate the code that reads P2P bridge windows (pci_read_bridge_io() and pci_cfg_fake_ranges()) because the bridge I/O resource is updated in the HEADER quirk, in pci_read_bridge_io(), in pci_setup_bridge(), and again in the FINAL quirk. This is confusing and makes it impossible to reassign the bridge windows after FINAL quirks are run. This patch adds support for 1K windows in the generic paths, so the HEADER quirk only has to enable this support. The FINAL quirk, which used to undo damage done by pci_setup_bridge(), is no longer needed. This removes "if (!res->start) res->start = ..." from pci_read_bridge_io(); that was part of 9d265124d051 to avoid overwriting the resource filled in by the quirk. Since pci_read_bridge_io() itself now knows about granularity, the quirk no longer updates the resource and this test is no longer needed. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-10PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, tooBjorn Helgaas
After 253d2e5498, we disable MEM and IO decoding for most devices while we size 32-bit BARs. However, we restore the original COMMAND register before we size the upper 32 bits of 64-bit BARs, so we can still cause a conflict. This patch waits to restore the original COMMAND register until we're completely finished sizing the BAR. Reference: https://lkml.org/lkml/2007/8/25/154 Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09PCI: allow P2P bridge windows starting at PCI bus address zeroBjorn Helgaas
cd81e1ea1a4c added checks that prevent us from using P2P bridge windows that start at PCI bus address zero. The reason was to "prevent us from overwriting resources that are unassigned." But generic code should allow address zero in both BARs and bridge windows, so I think that commit was a mistake. Windows at bus address zero are legal and likely to exist on machines with an offset between bus addresses and CPU addresses. For example, in the following hypothetical scenario, the bridge at 00:01.0 has a window at bus address zero and the device at 01:00.0 has a BAR at bus address zero, and I think both are perfectly valid: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x100000000-0x1ffffffff] (bus address [0x00000000-0xffffffff]) pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [mem 0x100000000-0x100ffffff] pci 0000:01:00.0: reg 10: [mem 0x100000000-0x100ffffff] Acked-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-22Merge branch 'topic/bjorn-trivial' into nextBjorn Helgaas
* topic/bjorn-trivial: PCI: remove useless pcix_set_mmrbc() dev->bus check PCI: acpiphp: check whether _ADR evaluation succeeded PCI: shpchp: remove dead code PCI: fix P2P bridge I/O port window sign extension PCI: fix upstream P2P bridge checks when enabling OBFF and LTR PCI: use __weak consistently PCI: cleanup assign_requested_resources_sorted() kernel-doc warning sparc/PCI: remove unused pcibios_assign_resource() definition
2012-06-20PCI: fix P2P bridge I/O port window sign extensionBjorn Helgaas
On P2P bridges with 32-bit I/O decoding, we incorrectly sign-extended windows starting at 0x80000000 or above. In "base |= (io_base_hi << 16)", "io_base_hi" is promoted to a signed int before being extended to an unsigned long. This would cause a window starting at I/O address 0x80000000 to be treated as though it started at 0xffffffff80008000 instead, which should cause "no compatible bridge window" errors when we enumerate devices using that I/O space. The mmio and mmio_pref casts are not strictly necessary, but without them, correctness depends on the types of the PCI_MEMORY_RANGE_MASK and PCI_PREF_RANGE_MASK constants, which are not obvious from reading the local code. Found by Coverity (CID 138747 and CID 138748). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: insert busn_res for child busYinghai Lu
Now we can insert busn_res now, after all root bus's get inserted. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: add default busn_res for pci_scan_bus()Yinghai Lu
also do not need to shrink busn_res. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: add default busn_resourceYinghai Lu
We need to put into the resources list for legacy system. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: checking busn_res in pci_scan_root_bus()Yinghai Lu
Some callers do not supply the bus number aperture, usually because they do not know the end. In this case, we assume the aperture extends from the root bus number to bus 255, scan the bus, and shrink the bus number resource so it ends at the largest bus number we found. This is obviously not correct because the actual end of the aperture may well be larger than the largest bus number we found. But I guess it's all we have for now. Also print out one info about that, so we could find out which path does not have busn_res in resources list. [bhelgaas: changelog, _safe iterator unnecessary, use %pR format for bus] Signed-off-by: Yinghai Lu <yinghai@kernel.org>
2012-06-13PCI: insert busn_res in pci_create_root_bus()Yinghai Lu
That busn_res is from resources list. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: add busn_res operation functionsYinghai Lu
Will use them insert/update busn res in pci_bus struct. [bhelgaas: print conflicting entry if insertion fails] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: build a bus number resource tree for every domainYinghai Lu
This adds get_pci_domain_busn_res(), which returns the root of the bus number resource tree for a domain, creating it if necessary. We will later populate the tree with the bus numbers used by host bridges and P2P bridges in the domain. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu
Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-07Merge branch 'topic/stratus' into nextBjorn Helgaas
2012-04-30PCI: work around Stratus ftServer broken PCIe hierarchyBjorn Helgaas
A PCIe downstream port is a P2P bridge. Its secondary interface is a link that should lead only to device 0 (unless ARI is enabled)[1], so we don't probe for non-zero device numbers. Some Stratus ftServer systems have a PCIe downstream port (02:00.0) that leads to both an upstream port (03:00.0) and a downstream port (03:01.0), and 03:01.0 has important devices below it: [0000:02]-+-00.0-[03-3c]--+-00.0-[04-09]--... \-01.0-[0a-0d]--+-[USB] +-[NIC] +-... Previously, we didn't enumerate device 03:01.0, so USB and the network didn't work. This patch adds a DMI quirk to scan all device numbers, not just 0, below a downstream port. Based on a patch by Prarit Bhargava. [1] PCIe spec r3.0, sec 7.3.1 CC: Myron Stowe <mstowe@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: James Paradis <james.paradis@stratus.com> CC: Matthew Wilcox <matthew.r.wilcox@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: add host bridge release supportYinghai Lu
We need a hook to release host bridge resources allocated when creating root bus. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: add generic device into pci_host_bridge structYinghai Lu
Use that device for pci_root_bus bridge pointer. Use pci_release_bus_bridge_dev() to release allocated pci_host_bridge in remove path. Use root bus bridge pointer to get host bridge pointer instead of searching host bridge list. That leaves the host bridge list unused, so remove it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-30PCI: move host bridge-related code to host-bridge.cYinghai Lu
Move host bridge-related code from probe.c to a new host-bridge.c. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-03-20PCI: fix bridge I/O window bus-to-resource conversionBjorn Helgaas
In 5bfa14ed9f3c, I forgot to initialize res2.flags before calling pcibios_bus_to_resource(), which depends on the resource type to locate the correct aperture. This bug won't hurt x86, which currently never has an offset between bus and CPU addresses, but will affect other architectures. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: Move "pci reassigndev resource alignment" out of quirks.cYinghai Lu
This isn't really a quirk; calling it directly from pci_add_device makes more sense. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-24PCI: collapse pcibios_resource_to_busBjorn Helgaas
Everybody uses the generic pcibios_resource_to_bus() supplied by the core now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-24PCI: add generic pcibios_resource_to_bus()Bjorn Helgaas
This replaces the generic versions of pcibios_resource_to_bus() and pcibios_bus_to_resource() in asm-generic/pci.h with versions that use pci_resource_to_bus() and pci_bus_to_resource(). The replacements are equivalent except that they can apply host bridge window offsets when the arch has supplied them by using pci_add_resource_offset(). Each arch can convert to using pci_add_resource_offset() individually by removing its device resource fixups from pcibios_fixup_bus() and supplying ARCH_HAS_GENERIC_PCI_OFFSETS. ARCH_HAS_GENERIC_PCI_OFFSETS can be removed after all have converted. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-24PCI: convert bus addresses to resource when reading BARsBjorn Helgaas
Some PCI host bridges translate CPU addresses to PCI bus addresses. Previously, we initialized pci_dev resources with PCI bus addresses, then converted them to CPU addresses later in arch-specific code (pcibios_fixup_resources()), which leaves a window of time where the pci_dev resources are incorrect. This patch adds support in the core for this address translation. When the arch creates the root bus, it can supply the host bridge address translation information, and the core can use it to set the pci_dev resources correctly from the beginning. This gives us a way to fix the problem that quirks that run between device discovery and pcibios_fixup_resources() fail because they use pci_dev resources that haven't been converted. The reference below is to one such problem that affected ARM and ia64. Note that this patch has no effect until an arch starts using pci_add_resource_offset() with a non-zero offset: before that, all all host bridge windows have a zero offset and pci_bus_to_resource() copies the pci_bus_region directly to the struct resource. Reference: https://lkml.org/lkml/2009/10/12/405 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-24PCI: add struct pci_host_bridge_window with CPU/bus address offsetBjorn Helgaas
Some PCI host bridges apply an address offset, so bus addresses on PCI are different from CPU addresses. This patch adds a way for architectures to tell the PCI core about this offset. For example: LIST_HEAD(resources); pci_add_resource_offset(&resources, host->io_space, host->io_offset); pci_add_resource_offset(&resources, host->mem_space, host->mem_offset); pci_scan_root_bus(parent, bus, ops, sysdata, &resources); Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-24PCI: add struct pci_host_bridge and a list of all bridges foundBjorn Helgaas
This adds a list of all PCI host bridges we find and a way to look up the host bridge from a pci_dev. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-24PCI: don't publish new root bus until it's fully initializedBjorn Helgaas
When pci_create_root_bus() adds the new struct pci_bus to the global pci_root_buses list, the bus becomes visible to other parts of the kernel, so it should be fully initialized. This patch delays adding the bus to the pci_root_buses list until after all the struct pci_bus initialization is finished. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-02-23PCI: fix memleak for pci dev removing during hotplugYinghai Lu
unreferenced object 0xffff880276d17700 (size 64): comm "swapper/0", pid 1, jiffies 4294897182 (age 3976.028s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 18 f9 de 76 02 88 ff ff ...........v.... 10 00 00 00 0e 00 00 00 0f 28 40 00 00 00 00 00 .........(@..... backtrace: [<ffffffff81c8aede>] kmemleak_alloc+0x26/0x43 [<ffffffff811385f0>] __kmalloc+0x121/0x183 [<ffffffff813cf821>] pci_add_cap_save_buffer+0x35/0x7c [<ffffffff813d12b7>] pci_allocate_cap_save_buffers+0x1d/0x65 [<ffffffff813cdb52>] pci_device_add+0x92/0xf1 [<ffffffff81c8afe6>] pci_scan_single_device+0x9f/0xa1 [<ffffffff813cdbd2>] pci_scan_slot.part.20+0x21/0x106 [<ffffffff813cdce2>] pci_scan_slot+0x2b/0x35 [<ffffffff81c8dae4>] __pci_scan_child_bus+0x51/0x107 [<ffffffff81c8d75b>] pci_scan_bridge+0x376/0x6ae [<ffffffff81c8db60>] __pci_scan_child_bus+0xcd/0x107 [<ffffffff81c8dbab>] pci_scan_child_bus+0x11/0x2a [<ffffffff81cca58c>] pci_acpi_scan_root+0x18b/0x21c [<ffffffff81c916be>] acpi_pci_root_add+0x1e1/0x42a [<ffffffff81406210>] acpi_device_probe+0x50/0x190 [<ffffffff814a0227>] really_probe+0x99/0x126 Need to free saved_buffer for capabilities. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23PCI: Fix device class print outYinghai Lu
Found debug print of class is shifted. | pci 0000:f8:15.2: [8086:2b56] type 0 class 0x000600 Code is trying to print class with 6 digits, but use shifted class with 4 digits valid value as variable. Change to original dev->class directly. Also remove not needed calculating of local variable class, because it will be updated after pci_fixup_device(pci_fixup_early...) Also unify type print out when class and header is not matched. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v0.10.2 at 2024-09-16 03:10:45 (GMT)