| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (149 commits)
arm: omap: Add omap3_defconfig
AM35xx: Defconfig for AM3517 EVM board
AM35xx: Add support for AM3517 EVM board
omap: 3630sdp: defconfig creation
omap: 3630sdp: introduce 3630 sdp board support
omap3: Add defconfig for IGEP v2 board
omap3: Add minimal IGEP v2 support
omap3: Add CompuLab CM-T35 defconfig
omap3: Add CompuLab CM-T35 board support
omap3: rx51: Add wl1251 wlan driver support
omap3: rx51: Add SDRAM init
omap1: Add default kernel configuration for Herald
omap1: Add board support and LCD for HTC Herald
omap: zoom2: update defconfig for LL_DEBUG_NONE
omap: zoom3: defconfig creation
omap3: zoom: Introduce zoom3 board support
omap3: zoom: Drop i2c-1 speed to 2400
omap3: zoom: rename zoom2 name to generic zoom
omap3: zoom: split board file for software reuse
omap3evm: MIgrate to smsc911x ethernet driver
...
Fix trivial conflict (two unrelated config options added next to each
other) in arch/arm/mach-omap2/Makefile
|
|
Jonathan Cameron reports that building PCMCIA as modules doesn't work:
As module get a load of undefined symbols:
ERROR: "soc_pcmcia_request_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_free_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_enable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_disable_irqs" [drivers/pcmcia/pxa2xx_stargate2.ko] undefined!
ERROR: "soc_pcmcia_add_one" [drivers/pcmcia/pxa2xx_base.ko] undefined!
ERROR: "soc_common_pcmcia_get_timing" [drivers/pcmcia/pxa2xx_base.ko] undefined!
ERROR: "soc_pcmcia_remove_one" [drivers/pcmcia/pxa2xx_base.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
This is because soc_common tries to be built-in, but it should be a module.
Allow soc_common to be a module.
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Both iPAQs h3600 and h3100 share the same control
GPIOs for PCMCIA, so driver can be reused.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Combine both headers into one, rename to h3xxx.h and change all
users accordingly.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
gpiolib
Use of gpio_request/gpio_free in some callbacks may look ugly, but
corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet)
init/exit hooks and registering these gpios in *_mach_init is also
not possible, because htc-gpio driver starts a bit later...
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Convert all operations with GPLR/GPCR/GPSR to gpiolibs calls.
Also change all IRQ_GPIO* to gpio_to_irq(*GPIO*)
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (50 commits)
pcmcia: rework the irq_req_t typedef
pcmcia: remove deprecated handle_to_dev() macro
pcmcia: pcmcia_request_window() doesn't need a pointer to a pointer
pcmcia: remove unused "window_t" typedef
pcmcia: move some window-related code to pcmcia_ioctl.c
pcmcia: Change window_handle_t logic to unsigned long
pcmcia: Pass struct pcmcia_socket to pcmcia_get_mem_page()
pcmcia: Pass struct pcmcia_device to pcmcia_map_mem_page()
pcmcia: Pass struct pcmcia_device to pcmcia_release_window()
drivers/pcmcia: remove unnecessary kzalloc
pcmcia: correct handling for Zoomed Video registers in topic.h
pcmcia: fix printk formats
pcmcia: autoload module pcmcia
pcmcia/staging: update comedi drivers
PCMCIA: stop duplicating pci_irq in soc_pcmcia_socket
PCMCIA: ss: allow PCI IRQs > 255
PCMCIA: soc_common: remove 'dev' member from soc_pcmcia_socket
PCMCIA: soc_common: constify soc_pcmcia_socket ops member
PCMCIA: sa1111: remove duplicated initializers
PCMCIA: sa1111: wrap soc_pcmcia_socket to contain sa1111 specific data
...
|
|
Most of the irq_req_t typedef'd struct can be re-worked quite
easily:
(1) IRQInfo2 was unused in any case, so drop it.
(2) IRQInfo1 was used write-only, so drop it.
(3) Instance (private data to be passed to the IRQ handler):
Most PCMCIA drivers using pcmcia_request_irq() to actually
register an IRQ handler set the "dev_id" to the same pointer
as the "priv" pointer in struct pcmcia_device. Modify the two
exceptions (ipwireless, ibmtr_cs) to also work this waym and
set the IRQ handler's "dev_id" to p_dev->priv unconditionally.
(4) Handler is to be of type irq_handler_t.
(5) Handler != NULL already tells whether an IRQ handler is present.
Therefore, we do not need the IRQ_HANDLER_PRESENT flag in
irq_req_t.Attributes.
CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: Jaroslav Kysela <perex@perex.cz>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Karsten Keil <isdn@linux-pingi.de>
for the Bluetooth parts: Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
pcmcia_request_window() only needs a pointer to struct pcmcia_device, not
a pointer to a pointer.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Acked-by: Karsten Keil <keil@b1-systems.de> (for ISDN)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
pcmcia_get_window() and pcmcia_get_mem_page() were only called from
pcmcia_ioctl.c. Therefore, move these functions to that file, and
remove the useless EXPORTs.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Logic changes based on top of the other patches:
This set of patches changed window_handle_t from being a pointer to an
unsigned long. The unsigned long is now a simple index into socket->win[].
Going from a pointer to unsigned long should leave the user space interface
unchanged unless I'm mistaken.
This change results in code that is less error prone and a user space
interface which is much cleaner and safer. A nice side effect is that we
are also are able to remove all members except one from window_t.
[ linux@dominikbrodowski.net:
Update to 2.6.31. Also, a plain "index" to socket->win[] does not
work, as several codepaths rely on "window_handle_t" being
non-zero if used. Therefore, set the window_handle_t to the
socket->win[] index + 1. ]
CC: netdev@vger.kernel.org
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
No logic changes, just pass struct pcmcia_socket to pcmcia_get_mem_page()
[linux@dominikbrodowski.net: update to 2.6.31]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
No logic changes, just pass struct pcmcia_device to pcmcia_map_mem_page()
[linux@dominikbrodowski.net: update to 2.6.31]
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-scsi@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Acked-by: Karsten Keil <keil@b1-systems.de> (for ISDN)
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
No logic changes, just pass struct pcmcia_device to pcmcia_release_window().
[linux@dominikbrodowski.net: update to 2.6.31]
CC: netdev@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
The result of calling kzalloc is never used or freed.
The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
when != if (...) { <+...x...+> }
(
x->f1 = E
|
(x->f1 == NULL || ...)
|
f(...,x->f1,...)
)
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Fix handling of Zoomed Video Registers in the Topic pcmcia controller
( http://bugzilla.kernel.org/show_bug.cgi?id=14581 ). The information
has been retrieved from the Topic manual which can be obtained from
Toshiba.
The Zoomed Video is used with PCMCIA Cards like the Margi DVD-to-Go.
[linux@dominikbrodowski.net: whitespace & commit message fix]
Signed-off-by: Avi Cohen Stuart <avi.cohenstuart@infor.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
|
|
Attempt to load the "pcmcia" module for 16-bit PCMCIA cards, so that
PCMCIA support becomes available without pcmciautils/udev userspace
interaction. Based on a suggestion and a patch
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
but converted it to request_module_nowait() and move it to a later
stage.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
skt->irq is a mere duplication of pcmcia_socket's pci_irq member.
Get rid of it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
The 'dev' member is now only ever written, so we can safely remove it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
No one should modify the ops structure supplied to soc_pcmcia_socket
so make it const.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Move the individual socket probing and initialization down into the
SoC specific support files, thereby allowing soc_common_drv_pcmcia_probe
to be eliminated. soc_common.c now no longer deals with distinct groups
of sockets.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Mechanically transplant the removal code from soc_common into each
SoC specific base support file, thereby allowing
soc_common_drv_pcmcia_remove to be removed. No other changes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Factor out the functionality for adding and removing a single
socket, thereby allowing SoCs to individually register each
socket. The advantage of this approach is that SoCs can then
extend soc_pcmcia_socket as they wish.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Convert soc_common.c to be a stand alone module, rather than wrapping
it up into the individual SoC specific base modules. In doing this,
we need to add init/exit functions for soc_common to register/remove
the cpufreq notifier.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
As suggested by Wolfram Sang <w.sang@pengutronix.de>, use dev_dbg(),
and dev_{err,warn,info}() in pd6729.c, and add some "\n" suggested by
Komuro <komurojun-mbn@nifty.com>. In the ISR, use pr_devel() and
dev_vdbg() as they are only compiled if DEBUG (or, for dev_vdbg(),
VERBOSE_DEBUG) are set explicitly.
CC: Komuro <komurojun-mbn@nifty.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
As all in-tree drivers have been converted to not use cs_error() any more,
drop these functions and definitions, and update the Documentation.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Add a few more error and debug messages to the PCMCIA core.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Make use of the dynamic debug infrastructure in various PCMCIA socket
drivers. By doing so, only the drivers relying on soc_common make use
of CONFIG_PCMCIA_DEBUG. Therefore, update the Kconfig entry accordingly.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Use the generic "dynamic debug" infrastructure instead of
CONIG_PCMCIA_DEBUG in the PCMCIA core (pcmcia.ko and pcmcia_core.ko). To
enable debugging, enable CONFIG_DYNAMIC_DEBUG, mount debugfs and
$ echo -n 'module pcmcia_core +p' > /sys/kernel/debug/dynamic_debug/control
for the complete module "pcmcia_core", for example. For more detailled
instructions, please see Documentation/dynamic-debug-howto.txt
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Remove the pcmcia_get_{first,next}_tuple() calls no longer needed by
(current) pcmcia device drivers.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
As a replacement to pcmcia_get_{first,next}_tuple() and
pcmcia_get_tuple_data(), three new -- and easier to use --
functions are added:
- pcmcia_get_tuple() to get the very first CIS entry of one
type.
- pcmcia_loop_tuple() to loop over all CIS entries of one type.
- pcmcia_get_mac_from_cis() to read out the hardware MAC address
from CISTPL_FUNCE.
Only a handful of drivers need these functions anyway, as most
CIS access is already handled by pcmcia_loop_config(), which
now shares the same backed (pccard_loop_tuple()) with
pcmcia_loop_tuple().
A pcmcia_get_mac_from_cis() bug noted by Komuro
<komurojun-mbn@nifty.com> has been fixed in this revision.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Commit 0c570cdeb8fdfcb354a3e9cd81bfc6a09c19de0c
(PM / yenta: Fix cardbus suspend/resume regression) caused resume to
fail on systems with two CardBus bridges. While the exact nature
of the failure is not known at the moment, it can be worked around by
splitting the yenta resume into an early part, executed during the
early phase of resume, that will only resume the socket and power it
up if there was a card in it during suspend, and a late part,
executed during "regular" resume, that will carry out all of the
remaining yenta resume operations.
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14334, which is a
listed regression from 2.6.31.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reported-by: Stephen J. Gowdy <gowdy@cern.ch>
Tested-by: Jose Marino <braket@hotmail.com>
|
|
Out of 10 PCI_IDs found in the PCMCIA subsystem, only two were not defined in
pci_ids.h. Move them and drop the duplicates. Successfully build-tested.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
The CL-PD6729 chip in some docking station is not initialized properly
under Linux. In that case, do not load the pd6729 driver.
[Dominik Brodowski <linux@dominikbrodowski.net>: spelling fixes, check for NULL not 0]
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Fix more possible warnings introduced by my commit
1d80766554322236aee50d6023693b3210b9cf38 as fixed by the previous patch from
Randy Dunlap. Not tested due to no hardware.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.
This was done with:
#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"
for header in $headers; do
old="#include <mach\/$header"
new="#include <plat\/$header"
for dir in $omap_dirs; do
find $dir -type f -name \*.[chS] | \
xargs sed -i "s/$old/$new/"
done
find drivers/ -type f -name \*omap*.[chS] | \
xargs sed -i "s/$old/$new/"
for file in $other_files; do
sed -i "s/$old/$new/" $file
done
done
for header in $(ls $mach_dir_old/*.h); do
git mv $header $plat_dir_new/
done
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
... for struct pcmcia_device only provides for 4 anyway.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
pccard_read_tuple(), which is only used by the PCMCIA core, should
handle TUPLE_RETURN_COMMON more sensibly: If a specific function (which
may be 0) is requested, set tuple.Attributes = 0 as was done in all
PCMCIA drivers. If, however, BIND_FN_ALL is requested, return the
"common" tuple. As to the callers of pccard_read_tuple():
- All calls to pcmcia_validate_cis() had set the "function" parameter to
BIND_FN_ALL. Therefore, remove the "function" parameter and make the
parameter to pccard_read_tuple explicit.
- Calls to CISTPL_VERS_1 and CISTPL_MANFID now set BIND_FN_ALL. This was
already the case for calls to CISTPL_LONGLINK_MFC.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Fix new pcmcia printk format warnings:
[This has now moved from linux-next to mainline.
Originally sent 2009-SEP-17.]
drivers/pcmcia/i82365.c:1055: warning: format '%#x' expects type 'unsigned int', but argument 6 has type 'phys_addr_t'
drivers/pcmcia/i82365.c:1055: warning: format '%#x' expects type 'unsigned int', but argument 7 has type 'phys_addr_t'
drivers/pcmcia/tcic.c:734: warning: format '%#x' expects type 'unsigned int', but argument 6 has type 'phys_addr_t'
drivers/pcmcia/tcic.c:734: warning: format '%#x' expects type 'unsigned int', but argument 7 has type 'phys_addr_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits)
ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7
ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()
ARM: 5740/1: fix valid_phys_addr_range() range check
ARM: 5739/1: ARM: allow empty ATAG_CORE
ARM: 5735/1: sa1111: CodingStyle cleanups
ARM: 5738/1: Correct TCM documentation
ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs
ARM: 5733/1: fix bcmring compile error
ARM: 5732/1: remove redundant include file
ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3
ARM: Ensure do_cache_op takes mmap_sem
ARM: Fix __cpuexit section mismatch warnings
ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast
ARM: includecheck fix: mach-davinci, board-dm365-evm.c
ARM: Remove unused CONFIG SA1100_H3XXX
ARM: Fix warning: unused variable 'highmem'
ARM: Fix warning: #warning syscall migrate_pages not implemented
ARM: Fix SA11x0 clocksource warning
ARM: Fix SA1100 Neponset serial section mismatch
ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warnings
...
|
|
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Since 2.6.29 the PCI PM core have been restoring the standard
configuration registers of PCI devices in the early phase of
resume. In particular, PCI devices without drivers have been handled
this way since commit 355a72d75b3b4f4877db4c9070c798238028ecb5
(PCI: Rework default handling of suspend and resume). Unfortunately,
this leads to post-resume problems with CardBus devices which cannot
be accessed in the early phase of resume, because the sockets they
are on have not been woken up yet at that point.
To solve this problem, move the yenta socket resume to the early
phase of resume and, analogously, move the suspend of it to the late
phase of suspend. Additionally, remove some unnecessary PCI code
from the yenta socket's resume routine.
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13092, which is a
post-2.6.28 regression.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Florian <fs-kernelbugzilla@spline.de>
Cc: stable@kernel.org
|
|
pcmcia_socket_dev_suspend() doesn't use its second argument, so it
may be dropped safely.
This change is necessary for the subsequent yenta suspend/resume fix.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@kernel.org
|
|
WARNING: drivers/pcmcia/sa1100_cs.o(.data+0x48): Section mismatch in reference from the variable sa11x0_pcmcia_hw_init to the function .init.text:pcmcia_assabet_init()
The variable sa11x0_pcmcia_hw_init references
the function __init pcmcia_assabet_init()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: drivers/pcmcia/sa1111_cs.o(.text+0x298): Section mismatch in reference from the function pcmcia_probe() to the function .init.text:pcmcia_neponset_init()
The function pcmcia_probe() references
the function __init pcmcia_neponset_init().
This is often because pcmcia_probe lacks a __init
annotation or the annotation of pcmcia_neponset_init is wrong.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
Conflicts:
MAINTAINERS
|
