summaryrefslogtreecommitdiff
path: root/drivers/pcmcia
AgeCommit message (Collapse)Author
2012-10-19Merge branch 'testing/driver-warnings' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes A collection of warning fixes on non-ARM code from Arnd Bergmann: * 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN SCSI: ARM: make fas216_dumpinfo function conditional SCSI: ARM: ncr5380/oak uses no interrupts
2012-10-12pcmcia: sharpsl: don't discard sharpsl_pcmcia_opsArnd Bergmann
The sharpsl_pcmcia_ops structure gets passed into sa11xx_drv_pcmcia_probe, where it gets accessed at run-time, unlike all other pcmcia drivers that pass their structures into platform_device_add_data, which makes a copy. This means the gcc warning is valid and the structure must not be marked as __initdata. Without this patch, building collie_defconfig results in: drivers/pcmcia/pxa2xx_sharpsl.c:22:31: fatal error: mach-pxa/hardware.h: No such file or directory compilation terminated. make[3]: *** [drivers/pcmcia/pxa2xx_sharpsl.o] Error 1 make[2]: *** [drivers/pcmcia] Error 2 make[1]: *** [drivers] Error 2 make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pavel Machek <pavel@suse.cz> Cc: linux-pcmcia@lists.infradead.org Cc: Jochen Friedrich <jochen@scram.de> Cc: stable@vger.kernel.org
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-10-02Merge tag 'fixes-non-critical' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-critical ARM soc bug fixes from Olof Johansson: "These were submitted as bug fixes before v3.6 but not considered important enough to be included in it. Some of them cross over to cleanup territory as well, and aren't strictly bugfixes." * tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) ARM: nomadik: remove NAND_NO_READRDY use ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe() ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name ARM: ep93xx: Move ts72xx.h out of include/mach ARM: ep93xx: use __iomem pointers for MMIO ARM: msm: Fix early debug uart mapping on some memory configs ARM: msm: io: Change the default static iomappings to be shared ARM: msm: io: Remove 7x30 iomap region from 7x00 ARM: msm: Remove call to missing FPGA init on 8660 ARM: OMAP4: wakeupgen: remove duplicate AUXCOREBOOT* read/write ARM: OMAP4: wakeupgen: Fix the typo in AUXCOREBOOT register save dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const ...
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21ARM: pxa: fix return value check in pxa2xx_drv_pcmcia_probe()Wei Yongjun
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-09-20ARM: OMAP1: Make plat/mux.h omap1 onlyTony Lindgren
We are moving omap2+ to use the device tree based pinctrl-single.c and will be removing the old mux framework. This will remove the omap1 specific parts from plat-omap. Acked-by: Felipe Balbi <balbi@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-usb@vger.kernel.org Cc: linux-pcmcia@lists.infradead.org Cc: spi-devel-general@lists.sourceforge.net Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-14ARM: pxa: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-08-22pcmcia: Use common pci_stop_and_remove_bus_device()Bjorn Helgaas
Use pci_stop_and_remove_bus_device() like most other hotplug drivers rather than the special-purpose "behind_bridge" variant. This just means we have to iterate through all the devices downstream of the bridge ourselves, which is the same thing pci_stop_behind_bridge() did. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2012-07-27Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
2012-07-09ARM: sa11x0/pxa: convert OS timer registers to IOMEMRussell King
Make the OS timer registers have IOMEM like properities so they can be passed to readl_relaxed/writel_relaxed() et.al. rather than being straight volatile dereferences. Add linux/io.h includes where required. linux/io.h includes added to arch/arm/mach-sa1100/cpu-sa1100.c, arch/arm/mach-sa1100/jornada720_ssp.c, arch/arm/mach-sa1100/leds-lart.c drivers/input/touchscreen/jornada720_ts.c, drivers/pcmcia/sa1100_shannon.c from Arnd. This fixes these warnings: arch/arm/mach-sa1100/time.c: In function 'sa1100_timer_init': arch/arm/mach-sa1100/time.c:104: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type arch/arm/mach-pxa/time.c: In function 'pxa_timer_init': arch/arm/mach-pxa/time.c:126: warning: passing argument 1 of 'clocksource_mmio_init' discards qualifiers from pointer target type Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-13PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu
Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-05-07pcmcia: add driver for hx4700Paul Parsons
This patch adds support for the HP iPAQ hx4700 to the existing pxa2xx-pcmcia driver. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmciaLinus Torvalds
Pull a few PCMCIA updates from Dominik Brodowski. Fix up trivial conflict (modified code in question had been removed) in drivers/pcmcia/soc_common.c. * git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia: pcmcia at91_cf: fix raw gpio number usage ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe pcmcia: Convert to DEFINE_PCI_DEVICE_TABLE pcmcia: convert drivers/pcmcia/* to use module_platform_driver() pcmcia: irq: Remove IRQF_DISABLED
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-27Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: device tree work" from Arnd Bergmann: "Most of these patches convert code from using static platform data to describing the hardware in the device tree. This is only the first half of the changes for v3.4 because a lot of patches for this topic came in the last week before the merge window. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h} * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board ARM: OMAP2+: Remove extra ifdefs for board-generic ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected ASoC: DT: Add digital microphone binding to PAZ00 board. ARM: dt: Add ARM PMU to tegra*.dtsi ARM: at91: at91sam9x5cm/dt: add leds support ARM: at91: usb_a9g20/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support ARM: at91: at91sam9m10g45ek/dt: add leds support ARM: at91: usb_a9g20/dt: add leds support ARM: at91/pio: add new PIO3 features ARM: at91: add sam9_smc.o to at91sam9x5 build ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter ARM: at91/tc: add device tree support to atmel_tclib ...
2012-03-25Merge branch 'sa1111' into sa11x0Russell King
Conflicts: arch/arm/common/sa1111.c arch/arm/mach-sa1100/neponset.c Fixed: arch/arm/mach-sa1100/assabet.c for the neponset changes
2012-03-24ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.cRussell King
Move the PCMCIA interface register definitions into the driver, rather than keeping them in a common place. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-24Merge branch 'pcmcia' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #3 ARM updates from Russell King: "This adds gpio support to soc_common, allowing an amount of code to be deleted from each PCMCIA socket driver for the PXA/SA11x0 SoCs." * 'pcmcia' of git://git.linaro.org/people/rmk/linux-arm: PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix. PCMCIA: make lubbock socket driver part of sa1111_cs PCMCIA: add Kconfig control for building sa11xx_base.c PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_io PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure code PCMCIA: soc_common: remove explicit wrprot initialization in socket drivers PCMCIA: soc_common: remove soc_pcmcia_*_irqs functions PCMCIA: sa11x0: h3600: convert to use new irq/gpio management PCMCIA: sa11x0: simpad: convert to use new irq/gpio management PCMCIA: sa11x0: shannon: convert to use new irq/gpio management PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio management PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystem PCMCIA: sa11x0: cerf: convert to use new irq/gpio management PCMCIA: sa11x0: assabet: convert to use new irq/gpio management PCMCIA: sa1111: use new per-socket irq/gpio infrastructure PCMCIA: pxa: convert PXA socket drivers to use new irq/gpio management PCMCIA: soc_common: add GPIO support for card status signals PCMCIA: soc_common: move common initialization into soc_common
2012-03-23Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
2012-03-09Merge 3.3-rc6 into driver-core-nextGreg Kroah-Hartman
This was done to resolve a conflict in the drivers/base/cpu.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08Merge branch 'dt' of git://github.com/hzhuang1/linux into next/dtOlof Johansson
* 'dt' of git://github.com/hzhuang1/linux: (6 commits) Document: devicetree: add OF documents for arch-mmp ARM: dts: append DTS file of pxa168 ARM: mmp: append OF support on pxa168 ARM: mmp: enable rtc clk in pxa168 i2c: pxa: add OF support serial: pxa: add OF support (plus update to v3.3-rc6)
2012-03-03pcmcia at91_cf: fix raw gpio number usageJoachim Eastwood
This patches fixes two things: * Use gpio_valid function to check gpio before usage This must be done after 63b4c29678500 which uses -EINVAL for unused pin's * Use gpio_to_irq to convert gpio's to irq The driver assumed a 1:1 mapping between gpio and irq numbers. This is no longer true after d0fbda9add3281. Tested on custom RM9200 board with 8gb CF card. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probeAxel Lin
If pxa2xx_drv_pcmcia_add_one fails, it will go to err1 error path. Add a missing clk_put in the error path. Checking the ret value after the for loop is redundant, it is always false. Thus remove the redundant checking. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03pcmcia: Convert to DEFINE_PCI_DEVICE_TABLEAxel Lin
Convert static struct pci_device_id *[] to static DEFINE_PCI_DEVICE_TABLE tables. Also convert to use PCI_DEVICE macro for better readablity. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03pcmcia: convert drivers/pcmcia/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/pcmcia/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Marc Zyngier <maz@misterjones.org> [for the viper part] Acked-by: Manuel Lauss <manuel.lauss@googlemail.com> [for the db1xxx_ss.c part] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-03-03pcmcia: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2012-02-29Merge branch 'at91-3.4-base2+cleanup' of ↵Arnd Bergmann
git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup * 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits) ARM: at91: properly sort dtb files in Makefile.boot ARM: at91: add at91sam9g25ek.dts in Makefile.boot ARM: at91/board-dt: drop default console Atmel: move console default platform_device to serial driver ARM: at91: merge SRAM Memory banks thanks to mirroring ARM: at91: finally drop at91_sys_read/write ARM: at91/rtc-at91sam9: pass the GPBR to use via resources ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use ARM: at91/PMC: make register base soc independent ARM: at91/PMC: move assignment out of printf ARM: at91/pm_slowclock: add runtime detection of memory contoller ARM: at91: make sdram/ddr register base soc independent ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h ARM: at91/pm_slowclock: function slow_clock() accepts parameters ARM: at91/pm_slowclock: rename register to named define ARM: at91/ST: remove not needed casts ARM: at91: make ST (System Timer) soc independent ARM: at91: make matrix register base soc independent ARM: at91/at91x40: remove use of at91_sys_read/write Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board, at91/pm_cleanup and at91/base. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-27PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridgeYinghai Lu
The old pci_remove_behind_bridge actually do stop and remove. Make the name reflect that to reduce confusion. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23ARM: at91: make sdram/ddr register base soc independentJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-21PCMCIA: sa1111: rename sa1111 socket drivers to have sa1111_ prefix.Russell King
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: make lubbock socket driver part of sa1111_csRussell King
Lubbock is just another SA1111 socket driver, so now that Kconfig has better control of which files get built, we can sanitize the build for this. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: add Kconfig control for building sa11xx_base.cRussell King
sa11xx_base.c is currently built when either PCMCIA_SA1100 or PCMCIA_SA1111 are selected. Let's move the logic into Kconfig. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa1111: jornada720: no need to disable IRQs around sa1111_set_ioRussell King
sa1111_set_io() already contains the necessary locking within itself to safely change the state of a set of GPIOs. There's no need for callers to protect this by disabling IRQs themselves. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa1111: pass along sa1111_pcmcia_configure_socket() failure codeRussell King
Pass along the sa1111_pcmcia_configure_socket() failure code to higher levels, rather than just returning zero. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: soc_common: remove explicit wrprot initialization in socket driversRussell King
soc_common already initializes state.wrprot to zero, so explicitly setting wrprot to zero in the socket drivers has no additional effect. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: soc_common: remove soc_pcmcia_*_irqs functionsRussell King
Now that we use gpios and gpio_to_irq() etc to manage the various card status signals within soc_common, and all socket drivers are converted, these functions are no longer used. We can now get rid of these helper functions. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa11x0: h3600: convert to use new irq/gpio managementRussell King
Convert iPAQ socket driver to use the new irq/gpio management. As this already uses the GPIO subsystem, these changes are localized to just the PCMCIA directory. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa11x0: simpad: convert to use new irq/gpio managementRussell King
Convert Simpad socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-21PCMCIA: sa11x0: shannon: convert to use new irq/gpio managementRussell King
Convert Shannon socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-16ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probeAxel Lin
If pxa2xx_drv_pcmcia_add_one fails, it will go to err1 error path. Add a missing clk_put in the error path. Checking the ret value after the for loop is redundant, it is always false. Thus remove the redundant checking. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-02-09ARM: sa1111: add platform enable/disable functionsRussell King
Add platform hooks to be called when individual sa1111 devices are enabled and disabled. This will allow us to move some platform specifics out of the individual drivers. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09ARM: sa11x0: neponset: provide function to manipulate NCR_0Russell King
Rather than having direct register accesses to NCR_0 scattered amongst the code, provide a function instead. This contains the necessary race protection for this platform, ensuring that updates to this register are safe. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-09pcmcia: fix socket refcount decrementing on each resumeRussell King
This fixes a memory-corrupting bug: not only does it cause the warning, but as a result of dropping the refcount to zero, it causes the pcmcia_socket0 device structure to be freed while it still has references, causing slab caches corruption. A fatal oops quickly follows this warning - often even just a 'dmesg' following the warning causes the kernel to oops. While testing suspend/resume on an ARM device with PCMCIA support, and a CF card inserted, I found that after five suspend and resumes, the kernel would complain, and shortly die after with slab corruption. WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() As the message doesn't give a clue about which kobject, and the built-in debugging in drivers/base/power/main.c happens too late, this was added right before each get_device(): printk("%s: %p [%s] %u\n", __func__, dev, kobject_name(&dev->kobj), atomic_read(&dev->kobj.kref.refcount)); and on the 3rd s2ram cycle, the following behaviour observed: On the 3rd suspend/resume cycle: dpm_prepare: c1a0d998 [pcmcia_socket0] 3 dpm_suspend: c1a0d998 [pcmcia_socket0] 3 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 3 dpm_resume: c1a0d998 [pcmcia_socket0] 3 dpm_complete: c1a0d998 [pcmcia_socket0] 2 4th: dpm_prepare: c1a0d998 [pcmcia_socket0] 2 dpm_suspend: c1a0d998 [pcmcia_socket0] 2 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 2 dpm_resume: c1a0d998 [pcmcia_socket0] 2 dpm_complete: c1a0d998 [pcmcia_socket0] 1 5th: dpm_prepare: c1a0d998 [pcmcia_socket0] 1 dpm_suspend: c1a0d998 [pcmcia_socket0] 1 dpm_suspend_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume_noirq: c1a0d998 [pcmcia_socket0] 1 dpm_resume: c1a0d998 [pcmcia_socket0] 1 dpm_complete: c1a0d998 [pcmcia_socket0] 0 ------------[ cut here ]------------ WARNING: at include/linux/kref.h:41 kobject_get+0x28/0x50() Modules linked in: ucb1x00_core Backtrace: [<c0212090>] (dump_backtrace+0x0/0x110) from [<c04799dc>] (dump_stack+0x18/0x1c) [<c04799c4>] (dump_stack+0x0/0x1c) from [<c021cba0>] (warn_slowpath_common+0x50/0x68) [<c021cb50>] (warn_slowpath_common+0x0/0x68) from [<c021cbdc>] (warn_slowpath_null+0x24/0x28) [<c021cbb8>] (warn_slowpath_null+0x0/0x28) from [<c0335374>] (kobject_get+0x28/0x50) [<c033534c>] (kobject_get+0x0/0x50) from [<c03804f4>] (get_device+0x1c/0x24) [<c0388c90>] (dpm_complete+0x0/0x1a0) from [<c0389cc0>] (dpm_resume_end+0x1c/0x20) ... Looking at commit 7b24e7988263 ("pcmcia: split up central event handler"), the following change was made to cs.c: return 0; } #endif - - send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW); + if (!(skt->state & SOCKET_CARDBUS) && (skt->callback)) + skt->callback->early_resume(skt); return 0; } And the corresponding change in ds.c is from: -static int ds_event(struct pcmcia_socket *skt, event_t event, int priority) -{ - struct pcmcia_socket *s = pcmcia_get_socket(skt); ... - switch (event) { ... - case CS_EVENT_PM_RESUME: - if (verify_cis_cache(skt) != 0) { - dev_dbg(&skt->dev, "cis mismatch - different card\n"); - /* first, remove the card */ - ds_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH); - mutex_lock(&s->ops_mutex); - destroy_cis_cache(skt); - kfree(skt->fake_cis); - skt->fake_cis = NULL; - s->functions = 0; - mutex_unlock(&s->ops_mutex); - /* now, add the new card */ - ds_event(skt, CS_EVENT_CARD_INSERTION, - CS_EVENT_PRI_LOW); - } - break; ... - } - pcmcia_put_socket(s); - return 0; -} /* ds_event */ to: +static int pcmcia_bus_early_resume(struct pcmcia_socket *skt) +{ + if (!verify_cis_cache(skt)) { + pcmcia_put_socket(skt); + return 0; + } + dev_dbg(&skt->dev, "cis mismatch - different card\n"); + /* first, remove the card */ + pcmcia_bus_remove(skt); + mutex_lock(&skt->ops_mutex); + destroy_cis_cache(skt); + kfree(skt->fake_cis); + skt->fake_cis = NULL; + skt->functions = 0; + mutex_unlock(&skt->ops_mutex); + /* now, add the new card */ + pcmcia_bus_add(skt); + return 0; +} As can be seen, the original function called pcmcia_get_socket() and pcmcia_put_socket() around the guts, whereas the replacement code calls pcmcia_put_socket() only in one path. This creates an imbalance in the refcounting. Testing with pcmcia_put_socket() put removed shows that the bug is gone: dpm_suspend: c1a10998 [pcmcia_socket0] 5 dpm_suspend_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume_noirq: c1a10998 [pcmcia_socket0] 5 dpm_resume: c1a10998 [pcmcia_socket0] 5 dpm_complete: c1a10998 [pcmcia_socket0] 5 Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-04PCMCIA: sa11x0: nanoengine: convert reset handling to use GPIO subsystemRussell King
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem instead. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: sa11x0: nanoengine: convert to use new irq/gpio managementRussell King
Convert Nanoengine socket driver to use the new irq/gpio management. This is slightly more involved because we have to touch the private platform header file to modify the GPIO bitmasks to be GPIO numbers. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-04PCMCIA: sa11x0: cerf: convert reset handling to use GPIO subsystemRussell King
Rather than accessing GPSR and GPCR directly, use the GPIO subsystem instead. Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>