summaryrefslogtreecommitdiff
path: root/drivers/platform
AgeCommit message (Collapse)Author
2013-09-15Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform updates from Matthew Garrett: "Nothing amazing here, almost entirely cleanups and minor bugfixes and one bit of hardware enablement in the amilo-rfkill driver" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: platform/x86: panasonic-laptop: reuse module_acpi_driver samsung-laptop: fix config build error platform: x86: remove unnecessary platform_set_drvdata() amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310. wmi: parse_wdg() should return kernel error codes hp_wmi: Fix unregister order in hp_wmi_rfkill_setup() platform: replace strict_strto*() with kstrto*() x86: irst: use module_acpi_driver to simplify the code x86: smartconnect: use module_acpi_driver to simplify the code platform samsung-q10: use ACPI instead of direct EC calls thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirk thinkpad_acpi: return -NODEV while operating uninitialized LEDs
2013-09-11platform: convert apple-gmux driver to dev_pm_ops from legacy pm_opsShuah Khan
Convert drivers/platform/x86/apple-gmux to use dev_pm_ops instead of legacy pm_ops. This patch depends on pnp driver bus ops change to invoke pnp_driver dev_pm_ops. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Cc: Matthew Garrett <matthew.garrett@nebula.com> Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com> Cc: Ashley Lai <ashley@ashleylai.com> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05platform/x86: panasonic-laptop: reuse module_acpi_driverAndy Shevchenko
There is a macro to register and unregister modules in simple cases, Let's use it and clean up the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05samsung-laptop: fix config build errorRandy Dunlap
Fix build failure when ACPI_VIDEO=m and SAMSUNG_LAPTOP=y. The patch prevents that specific config combination. drivers/built-in.o: In function `samsung_init': samsung-laptop.c:(.init.text+0x128ff): undefined reference to `acpi_video_unregister' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Corentin Chary <corentin.chary@gmail.com> build testing: ACPI_VIDEO=m, SAMSUNG_LAPTOP=m: OK ACPI_VIDEO=y, SAMSUNG_LAPTOP=m: OK ACPI_VIDEO=y, SAMSUNG_LAPTOP=y: OK ACPI=n, SAMSUNG_LAPTOP=y: OK ACPI=n, SAMSUNG_LAPTOP=m: OK Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05platform: x86: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310.Jerome Meinke
This change extends the amilo_rfkill_id_table[] with the DMI_BOARD_NAME information of the Amilo L1310, so that the wifi device can be switched on. Signed-off-by: Jerome Meinke <meinkej@informatik.uni-freiburg.de> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05wmi: parse_wdg() should return kernel error codesDan Carpenter
The current code returns a mix of acpi_status and kernel error codes. It should just return kernel error codes. There are already error paths in this function which return -ENOMEM and that's what the caller expects. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05hp_wmi: Fix unregister order in hp_wmi_rfkill_setup()Kirill Tkhai
Register order is: wifi bluetooth wwan gps So unregister order must be: gps wwan bluetiith wifi But currently gps and wwan are swapped. Fix that. Also fix goto links. Signed-off-by: Kirill Tkhai <tkhai@yandex.ru> CC: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05platform: replace strict_strto*() with kstrto*()Jingoo Han
The usage of strict_strtoul() and strict_strtol() is not preferred, because strict_strtoul() and strict_strtol() are obsolete. Thus, kstrtoul() and kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05x86: irst: use module_acpi_driver to simplify the codeWei Yongjun
module_acpi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05x86: smartconnect: use module_acpi_driver to simplify the codeWei Yongjun
module_acpi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05platform samsung-q10: use ACPI instead of direct EC callsFrederick van der Wyck
This patch changes the Samsung Q10 backlight driver to use ACPI methods (the same ones as triggered by the brightness up/down function keys) instead of direct EC calls. The advantage is that the brightness setting is not lost on shutdown. Signed-off-by: Frederick van der Wyck <fvanderwyck@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirkAdam Lee
Some new Lenovo or ThinkPad laptops don't have EC controllable LEDs, their LED quirks are 0. This patch set led_supported=TPACPI_LED_NONE when quirk equals 0. Signed-off-by: Adam Lee <adam.lee@canonical.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05thinkpad_acpi: return -NODEV while operating uninitialized LEDsAdam Lee
Not all 0-15 LEDs are available for all models, sometimes it's even not safe. This patch return -NODEV while operating uninitialized LEDs. Signed-off-by: Adam Lee <adam.lee@canonical.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-09-05Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-03Merge tag 'pm+acpi-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction of Intel Thunderbolt support on systems that use ACPI for signalling Thunderbolt hotplug events. This also should make ACPIPHP work in some cases in which it was known to have problems. From Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov. 2) ACPI core code cleanups and dock station support cleanups from Jiang Liu and Rafael J Wysocki. 3) Fixes for locking problems related to ACPI device hotplug from Rafael J Wysocki. 4) ACPICA update to version 20130725 includig fixes, cleanups, support for more than 256 GPEs per GPE block and a change to make the ACPI PM Timer optional (we've seen systems without the PM Timer in the field already). One of the fixes, related to the DeRefOf operator, is necessary to prevent some Windows 8 oriented AML from causing problems to happen. From Bob Moore, Lv Zheng, and Jung-uk Kim. 5) Removal of the old and long deprecated /proc/acpi/event interface and related driver changes from Thomas Renninger. 6) ACPI and Xen changes to make the reduced hardware sleep work with the latter from Ben Guthro. 7) ACPI video driver cleanups and a blacklist of systems that should not tell the BIOS that they are compatible with Windows 8 (or ACPI backlight and possibly other things will not work on them). From Felipe Contreras. 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo, Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen, Toshi Kani, and Wei Yongjun. 9) cpufreq ondemand governor target frequency selection change to reduce oscillations between min and max frequencies (essentially, it causes the governor to choose target frequencies proportional to load) from Stratos Karafotis. 10) cpufreq fixes allowing sysfs attributes file permissions to be preserved over suspend/resume cycles Srivatsa S Bhat. 11) Removal of Device Tree parsing for CPU device nodes from multiple cpufreq drivers that required some changes related to of_get_cpu_node() to be made in a few architectures and in the driver core. From Sudeep KarkadaNagesha. 12) cpufreq core fixes and cleanups related to mutual exclusion and driver module references from Viresh Kumar, Lukasz Majewski and Rafael J Wysocki. 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap, Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo, Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd, Stratos Karafotis, and Viresh Kumar. 14) Fixes to prevent race conditions in coupled cpuidle from happening from Colin Cross. 15) cpuidle core fixes and cleanups from Daniel Lezcano and Tuukka Tikkanen. 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano, Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij, and Sahara. 17) System sleep tracing changes from Todd E Brandt and Shuah Khan. 18) PNP subsystem conversion to using struct dev_pm_ops for power management from Shuah Khan. * tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits) cpufreq: Don't use smp_processor_id() in preemptible context cpuidle: coupled: fix race condition between pokes and safe state cpuidle: coupled: abort idle if pokes are pending cpuidle: coupled: disable interrupts after entering safe state ACPI / hotplug: Remove containers synchronously driver core / ACPI: Avoid device hot remove locking issues cpufreq: governor: Fix typos in comments cpufreq: governors: Remove duplicate check of target freq in supported range cpufreq: Fix timer/workqueue corruption due to double queueing ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT ACPI / thermal: Add check of "_TZD" availability and evaluating result cpufreq: imx6q: Fix clock enable balance ACPI: blacklist win8 OSI for buggy laptops cpufreq: tegra: fix the wrong clock name cpuidle: Change struct menu_device field types cpuidle: Add a comment warning about possible overflow cpuidle: Fix variable domains in get_typical_interval() cpuidle: Fix menu_device->intervals type cpuidle: CodingStyle: Break up multiple assignments on single line cpuidle: Check called function parameter in get_typical_interval() ...
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-08-26Merge branch 'acpi-assorted'Rafael J. Wysocki
* acpi-assorted: ACPI / osl: Kill macro INVALID_TABLE(). earlycpio.c: Fix the confusing comment of find_cpio_data(). ACPI / x86: Print Hot-Pluggable Field in SRAT. ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c ACPI / thermal: Remove the unused lock of struct acpi_thermal ACPI / osl: Fix osi_setup_entries[] __initdata attribute location ACPI / numa: Fix __init attribute location in slit_valid() ACPI / dock: Fix __init attribute location in find_dock_and_bay() ACPI / Sleep: Fix incorrect placement of __initdata ACPI / processor: Fix incorrect placement of __initdata ACPI / EC: Fix incorrect placement of __initdata ACPI / scan: Drop unnecessary label from acpi_create_platform_device() ACPI: Move acpi_bus_get_device() from bus.c to scan.c ACPI / scan: Allow platform device creation without any IO resources ACPI: Cleanup sparse warning on acpi_os_initialize1() platform / thinkpad: Remove deprecated hotkey_report_mode parameter ACPI: Remove the old /proc/acpi/event interface
2013-08-23Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge fixes from Andrew Morton: "A few fixes. One is a licensing change and I don't do licensing, so please eyeball that one" Licensing eye-balled. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/lz4: correct the LZ4 license memcg: get rid of swapaccount leftovers nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error drivers/platform/olpc/olpc-ec.c: initialise earlier
2013-08-23drivers/platform/olpc/olpc-ec.c: initialise earlierDaniel Drake
Being a low-level component, various drivers (e.g. olpc-battery) assume that it is ok to communicate with the OLPC Embedded Controller during probe. Therefore the OLPC EC driver must be initialised before other drivers try to use it. This was the case until it was recently moved out of arch/x86 and restructured around commits ac2504151f5a ("Platform: OLPC: turn EC driver into a platform_driver") and 85f90cf6ca56 ("x86: OLPC: switch over to using new EC driver on x86"). Use arch_initcall so that olpc-ec is readied earlier, matching the previous behaviour. Fixes a regression introduced in Linux-3.6 where various drivers such as olpc-battery and olpc-xo1-sci failed to load due to an inability to communicate with the EC. The user-visible effect was a lack of battery monitoring, missing ebook/lid switch input devices, etc. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Andres Salomon <dilinger@queued.net> Cc: Paul Fox <pgf@laptop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-20x86: wmi: convert class code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the wmi class code to use the correct field. Cc: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-18Revert "hp-wmi: Enable hotkeys on some systems"Matthew Garrett
This reverts commit b253c9d1d858a3f115f791ee4fe2b9399ae7dbbd. It's still causing problems on some systems. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-08-18sony-laptop: Fix reporting of gfx_switch_statusDaniel Serpell
Signed-off-by: Daniel Serpell <daniel.serpell@gmail.com> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-08-18sony-laptop: return a negative error code in sonypi_compat_init()Wei Yongjun
Return -1 in the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-15platform / thinkpad: Remove deprecated hotkey_report_mode parameterThomas Renninger
It is somewhat strange that the default value to support the depracated interface is set (1). Anyway this has existed for years. The previous patch already removed the functionality to still export events through /proc. Now this param is useless and should vanish too. Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Matthew Garrett <matthew.garrett@nebula.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15ACPI: Remove the old /proc/acpi/event interfaceThomas Renninger
It is quite some time that this one has been deprecated. Get rid of it. Should some really important user be overseen, it may be reverted and the userspace program worked on first, but it is time to do something to get rid of this old stuff... Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: Matthew Garrett <matthew.garrett@nebula.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-15PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.Rusty Russell
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-10x86 platform drivers: fix gpio leakLibo Chen
when request_irq fails, we should release gpiochip v2: fix warning: ignoring return value of 'gpiochip_remove Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10toshiba_acpi: Add dependency on SERIO_I8042Seth Forshee
Configuring this option as a module with ACPI_TOSHIBA built-in results in the following errors: drivers/built-in.o: In function `toshiba_acpi_remove': >> toshiba_acpi.c:(.text+0x314bb0): undefined reference to `i8042_remove_filter' drivers/built-in.o: In function `toshiba_acpi_add': >> toshiba_acpi.c:(.devinit.text+0xb822): undefined reference to `i8042_install_filter' >> toshiba_acpi.c:(.devinit.text+0xb98b): undefined reference to `i8042_remove_filter' Add a dependency to prevent ACPI_TOSHIBA from being built-in when SERIO_I8042=m. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. 1015E/UAceLan Kao
Need to set wapf to 4 for ASUSTeK COMPUTER INC. 1015E/U, so that user can toggle wifi function through function key correctly. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10Add trivial driver to disable Intel Smart ConnectMatthew Garrett
Intel Smart Connect is an Intel-specific ACPI interface for configuring devices to wake up at regular intervals so they can pull down mail or other internet updates, and then go to sleep again. If a user enables this in Windows and then reboots into Linux, the device may wake up if it's put to sleep. Since there's no Linux userland support for any of this, the machine will then remain awake until something else puts it back to sleep. I haven't figured out all that much about how this works (there's a bunch of different ACPI calls available on the device), but this seems to be enough to turn it off. We can add more features to this driver if anyone ever cares about figuring out what the rest of the calls do or writing some Linux userspace to implement the rest of it. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10Add support driver for Intel Rapid Start TechnologyMatthew Garrett
Intel Rapid Start Technology is a firmware-based suspend-to-disk implementation. Once placed in S3, the device will wake once either a timeout elapses or the battery reaches a critical level. It will then resume to the firmware and copy the contents of RAM to a specialised partition, and then power off the machine. If the user turns the machine back on the firmware will copy the contents of the partition back to RAM and then resume from S3 as normal. This driver provides an interface for configuring the wakeup events and timeout. It still requires firmware support and an appropriate suspend partition. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10hp-wmi: add supports for POST code errorAlex Hung
HP laptops include a POST code error query 0x2A that reports which point BIOS fails to boot at. The error code is kept in CMOS until it is cleared. Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-wmi: control wlan-led only if wapf == 4AceLan Kao
Controlling the wlan led seems to have some side effects to the machines with wapf value is not equal to 4. It will make the keyboard backlight out of order. So, the patch will enable the wlan led function only if the wapf == 4. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=46791 Reported-by: Mirto Silvio Busico <m.busico@ieee.org> Tested-by: Karol Herbst <karolherbst@me.com> Tested-by: drunkenbatman <drunkenbatman@gmail.com> Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10drivers/platform/x86/intel_ips: Convert to module_pci_driverLibo Chen
use module_pci_driver instead of init/exit, make code clean. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-nb-wmi: ignore ALS notification key codeViktar Vauchkevich
Ignore Ambient Light Sensor notification key code 0xC6 found in ASUS UX31a. When the illuminance changes dmesg shows: [10814.939979] asus_wmi: Unknown key c6 pressed Signed-off-by: Viktar Vauchkevich <victorenator@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10asus-wmi: append newline to messagesvic
Append newline to messages. Signed-off-by: Viktar Vauchkevich <victorenator@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10x86: asus-laptop: fix invalid point accessLibo Chen
asus->name is null or point to const string,so it is not suitable to kfree it. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-10x86: msi-laptop: fix memleakLibo Chen
1. fix two visible mistakes: * when load_scm_model_init faild, we should call platform_device_del(msipf_device) * msipf_attribute_group should be remove in err case 2. change some tags, give them real meaning. Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-08amilo-rfkill: Add dependency on SERIO_I8042Ben Hutchings
I forgot to add this when changing the driver to use the proper i8042 functions. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-08dell-laptop: fix error return code in dell_init()Wei Yongjun
Fix to return -ENOMEM in the alloc_page() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-08hp-wmi: Enable hotkeys on some systemsMatthew Garrett
Kyle Evans discovered that he needed to set some bits in an EC register in order to receive hotkey events. Doing so blindly broke some otherwise working HP laptops. It turns out that there's a WMI call that accesses the same register, so let's try calling that instead. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Cc: Kyle Evans <kvans32@gmail.com>
2013-07-03drivers: avoid format string in dev_set_nameKees Cook
Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-01x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()lan,Tianyu
HP wmi platform driver fails to initialize GPS and causes poweroff failure in HP Elitebook 6930p. Call Trace: [<ffffffffa088d25a>] hp_wmi_bios_setup+0x25a/0x3a0 [hp_wmi] [<ffffffff8135978c>] platform_drv_probe+0x3c/0x70 [<ffffffff81356d6a>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff81357407>] driver_probe_device+0x87/0x3a0 [<ffffffff813577f3>] __driver_attach+0x93/0xa0 [<ffffffff81357760>] ? __device_attach+0x40/0x40 [<ffffffff81355403>] bus_for_each_dev+0x63/0xa0 [<ffffffff81356e8e>] driver_attach+0x1e/0x20 [<ffffffff81356a28>] bus_add_driver+0x1f8/0x2b0 [<ffffffff81357e81>] driver_register+0x71/0x150 [<ffffffff813594e6>] platform_driver_register+0x46/0x50 [<ffffffff813595ab>] platform_driver_probe+0x1b/0xa0 [<ffffffffa088d55e>] hp_wmi_init+0x1be/0x1fb [hp_wmi] [<ffffffffa088d3a0>] ? hp_wmi_bios_setup+0x3a0/0x3a0 [hp_wmi] [<ffffffff8100210a>] do_one_initcall+0x10a/0x160 [<ffffffff810bdac6>] load_module+0x1b46/0x2640 [<ffffffff8128da20>] ? ddebug_proc_write+0xf0/0xf0 [<ffffffff810be662>] sys_init_module+0xa2/0xf0 [<ffffffff814d975d>] system_call_fastpath+0x1a/0x1f Code: 48 ff ff ff 80 7b 24 00 74 d2 41 83 e5 01 45 38 ec 74 c9 48 8d bb a0 03 00 00 e8 ed fb aa e0 5b 41 5c 41 5d 44 89 f0 41 5e 5d c3 <0f> 0b 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 RIP [<ffffffffa05c57af>] rfkill_set_hw_state+0x9f/0xb0 [rfkill] RSP <ffff880071523b60> Check code and find this error is caused by misusing variable bluetooth_rfkill where gps_rfkill should be. Reported-and-tested-by: Iru Cai <mytbk920423@gmail.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=58401 Cc: All <stable@vger.kernel.org> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-09Add support for fan button on Ideapad Z580Maxim Mikityanskiy
The patch adds support for fan control button on Ideapad Z580. This is the same button as on Z570, but it raises different bit in VPCCMD_R_SPECIAL_BUTTONS. Also add message to dmesg when unknown button press detected, it will help adding support for new special buttons. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Tested-by: Ivan Vojtko <nekroman.sk@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08pvpanic: pvpanic device driverHu Tao
pvpanic device is a qemu simulated device through which guest panic event is sent to host. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08asus-nb-wmi: set wapf=4 for ASUSTeK COMPUTER INC. X75AAceLan Kao
BugLink: http://bugs.launchpad.net/bugs/1172151 Need to set wapf to 4 for ASUSTeK COMPUTER INC. X75A, so that user can toggle wifi function through function key correctly. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08drivers: platform: x86: Use PTR_RET functionAlexandru Gheorghiu
Used PTR_RET function instead of IS_ERR and PTR_ERR. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08sony-laptop: SVS151290S kbd backlight and gfx switch supportArthur Wirski
SVS151290S series uses handle 0x0163 for keyboard backlight and 0x015B for the graphics switch. Signed-off-by: Arthur Wirski <awirski@gmail.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-05-08hp-wmi: add more definitions for new event_id'sAlex Hung
New HP laptops start generating new events, and hp-wmi prints unknown event_ids for them. This patch also removes these messages Signed-off-by: Alex Hung <alex.hung@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>