summaryrefslogtreecommitdiff
path: root/drivers/power/Makefile
AgeCommit message (Collapse)Author
2013-03-19power_supply: Add support for tps65090-chargerRhyland Klein
This patch adds support for the tps65090 charger driver. This driver is responsible for controlling the charger aspect of the tps65090 mfd. Currently, this mainly consists of turning on and off the charger, but some features of the charger can be supported through this driver including: - Enable Auto Recharge based on Battery voltage - Fast Charge Safety Timer - Maximum battery discharge current - Maximum battery adapter current - Enable External Charge - Disable charging termination based on low charger current (supported) Once the driver is accepted, later patches can add support for the features above which are not yet supported. Based on work by: Syed Rafiuddin <srafiuddin@nvidia.com> Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-07pm2301-charger: Always compile the PM2301 Charger driver with AB8500 Battery ↵Marcus Cooper
Mgnt The PM2301 Charger should always be available when using the AB8500 Battery Management system, we're ensuring this will be the case. Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Hakan BERG <hakan.berg@stericsson.com> Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
2013-02-03Merge branch 'tb-power-2' of git://git.linaro.org/people/ljones/linux-3.0-ux500Anton Vorontsov
Pull a huge ab8500/pm2301 pile of changes from Lee Jones. Lee did an awesome job cleaning this stuff up and thus brought ab8500 Stericsson's development tree much closer to the mainline. Even more changes to come, though. Conflicts: drivers/power/Kconfig
2013-02-03power: Add battery driver for goldfish emulatorMike Lockwood
Add the emulated power driver for the Goldfish platform. This folds together the code from the Google tree, Jun Nakajima's cleanups and x86 porting work, and then a tidy up to pass checkpatch. Signed-off-by: Mike A. Chan <mikechan@google.com> [cleanup and x86 support] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [ported to 3.4] Signed-off-by: Tom Keel <thomas.keel@intel.com> [ported to 3.7 and final tidy] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-23pm2301: Provide u9540 support for the pm2301 chargerMichel JAOUEN
AC charger driver for the DB9540 based platforms. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com> Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com>
2013-01-06Merge branch 'for-anton' of git://git.linaro.org/people/ljones/linux-3.0-ux500Anton Vorontsov
2012-12-14Merge tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery subsystem updates from Anton Vorontsov: "Highlights: - Two new drivers from Pali Rohár and N900 hackers: rx51_battery and bq2415x_charger. The drivers are a part of a solution to replace the proprietary Nokia BME stack - Power supply core now registers devices with a thermal cooling subsystem, so we can now automatically throttle charging. Thanks to Ramakrishna Pallala! - Device tree support for ab8500 and max8925_power drivers - Random fixups and enhancements for a bunch of drivers." * tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6: (22 commits) max8925_power: Add support for device-tree initialization ab8500: Add devicetree support for chargalg ab8500: Add devicetree support for charger ab8500: Add devicetree support for btemp ab8500: Add devicetree support for fuelgauge twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_* jz4740-battery: Use devm_request_and_ioremap jz4740-battery: Use devm_kzalloc bq27x00_battery: Fixup nominal available capacity reporting bq2415x_charger: Fix style issues bq2415x_charger: Add Kconfig/Makefile entries power_supply: Add bq2415x charger driver power_supply: Add new Nokia RX-51 (N900) power supply battery driver max17042_battery: Fix missing verify_model_lock() return value check ds2782_battery: Fix signedness bug in ds278x_read_reg16() lp8788-charger: Fix ADC channel names lp8788-charger: Fix wrong ADC conversion lp8788-charger: Use consumer device name on setting IIO channels power_supply: Register power supply for thermal cooling device power_supply: Add support for CHARGE_CONTROL_* attributes ...
2012-12-11ab8500: remove explicit handling of battery typeRajanikanth H.V
property, battery-type shall be one of supported technology type instead blank - refer: Documentation/devicetree/bindings/power_supply/ab8500/fg.txt for the list supported types - this patch appends to ab8500 bm devs DT binding patch set ref: commit-id e0f1abeba5c2d8a2183566717d99294fd1a29c2e git://git.infradead.org/battery-2.6.git - promote ab8500_fg probe to happen before ab8500_btemp probe as btemp driver depends on fuelgauge list, ref: ab8500_fg_get(...) Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
2012-11-24power: Add simple poweroff-gpio driverJamie Lentin
Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-19ab8500: Add devicetree support for fuelgaugeRajanikanth H.V
- This patch adds device tree support for fuelgauge driver - optimize bm devices platform_data usage and of_probe(...) Note: of_probe() routine for battery managed devices is made common across all bm drivers. - test status: - interrupt numbers assigned differs between legacy and FDT mode. Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18bq2415x_charger: Add Kconfig/Makefile entriesAnton Vorontsov
This commit adds Kconfig and Makefile entries so that we could actually build the driver. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-11-18power_supply: Add new Nokia RX-51 (N900) power supply battery driverPali Rohár
This driver exporting battery design capacity, temperature and voltage for battery in Nokia RX-51. This driver is needed for open source battery management on Nokia RX-51 (N900). Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-10-07Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "1. New drivers: - Marvell 88pm860x charger and battery drivers; - Texas Instruments LP8788 charger driver; 2. Two new power supply properties: whether a battery is authentic, and chargers' maximal currents and voltages; 3. A lot of TI LP8727 Charger cleanups; 4. New features for Charger Manager, mainly now we can disable specific regulators; 5. Random fixes and cleanups for other drivers." Fix up trivial conflicts in <linux/mfd/88pm860x.h> * tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits) pda_power: Remove ac_draw_failed goto and label charger-manager: Add support sysfs entry for charger charger-manager: Support limit of maximum possible charger-manager: Check fully charged state of battery periodically lp8727_charger: More pure cosmetic improvements lp8727_charger: Fix checkpatch warning lp8727_charger: Add description in the private data lp8727_charger: Fix a typo - chg_parm to chg_param lp8727_charger: Make some cosmetic changes in lp8727_delayed_func() lp8727_charger: Clean up lp8727_charger_changed() lp8727_charger: Return if the battery is discharging lp8727_charger: Make lp8727_charger_get_propery() simpler lp8727_charger: Make lp8727_ctrl_switch() inline lp8727_charger: Make lp8727_init_device() shorter lp8727_charger: Clean up lp8727_is_charger_attached() lp8727_charger: Use specific definition lp8727_charger: Clean up lp8727 definitions lp8727_charger: Use the definition rather than enum lp8727_charger: Fix code for getting battery temp lp8727_charger: Clear interrrupts at inital time ...
2012-09-22power: battery: Generic battery driver using IIOanish kumar
Driver to allow use of the ADC drivers supported by the IIO subsystem for battery status monitoring. Connecting this driver to the relevant IIO device requires registration of the appropriate iio_map structure array by the IIO device driver (usually from platform data). If specified the driver will also make use of a gpio to provide interrupt driven notification that the battery is fully charged. In last version: Addressed concerns raised by lars: a. made the adc_bat per device. b. get the IIO channel using hardcoded channel names. c. Minor issues related to gpio_is_valid and some code refactoring. In V1: Addressed concerns raised by Anton: a. changed the struct name to gab(generic adc battery). b. Added some functions to neaten the code. c. Some minor coding guidelines changes. d. Used the latest function introduce by lars: iio_read_channel_processed to streamline the code. In V2: Addressed concerns by lars: a. No need of allocating memory for channels.Make it array. b. Code restructring, coding style and following kernel guidelines changes suggested by him. In V3: Addressed conerns by Anton: a. Added the copyright. b. Coding guidelines changes suggested by him. c. Added Makefile and Kconfig Signed-off-by: anish kumar <anish198519851985@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-20power_supply: Enable battery-charger for 88pm860xJett.Zhou
There are charger and battery measurement feature for 88pm860x PMIC. For charger, it can support pre-charge with small current when battery is nearly exausted and then changed into fast-charge with CC&CV mode. For battery monitor, it can support battery measurement such as vbat,vsys,vchg and ibat etc,it can aslo accumulating the Coulomb value charged or discharged from battery based on Conlomb Counter, we use it to estimate battery capacity. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-09-20power_supply: Add new lp8788 charger driverKim, Milo
TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight driver and current sinks. This patch supports the charger operations including the charger interrupt handling. The LP8788 charger driver provides configurable platform data. The charger platform data includes ADC input ID, maximum battery voltage, charging parameters and etc. The ADC input is used for getting the battery voltage and temperature. Charging parameters are used for updating the charger operations such like setting charging current and setting End-of-charge conditions. When the charging interrupt occurs, power supply uevents are generated in order to update the user-space information. For platform specific charger action, the charger_event() function can be used in the platform side. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-31ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/Jean Pihet
After a clean-up of the interfaces the OMAP Smartreflex IP driver is now a generic driver. Move it to drivers/power/avs/. The build is controlled by the following Kconfig options: . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support, . CONFIG_POWER_AVS_OMAP: AVS(Adaptive Voltage Scaling) support on OMAP containing the version 1 or version 2 of the SmartReflex IP, . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-03-30Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "Various small bugfixes and enhancements, plus two new drivers: - A quite complex ab8500 charger driver, submitted by Arun Murthy @ ST-Ericsson; - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce E Robertson and Alan Cox @ Intel. And that's all." * tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits) max17042_battery: Clean up interrupt handling Revert "max8998_charger: Include linux/module.h just once" ab8500_fg: Fix some build warnings on x86_64 max17042_battery: Fix CHARGE_FULL representation. max8998_charger: Include linux/module.h just once power_supply: Convert i2c drivers to module_i2c_driver lp8727_charger: Add MODULE_DEVICE_TABLE charger-manager: Simplify charger_get_property(), get rid of a warning charger-manager: Clean up for better readability da9052-battery: Convert to use module_platform_driver da9052-battery: Fix a memory leak when unload the module da9052-battery: Add missing platform_set_drvdata ab8500: Turn unneeded global symbols into local ones ab8500_fg: Fix copy-paste error ab8500_fg: Get rid of 'struct battery_type' ab8500_fg: Get rid of 'struct v_to_cap' ab8500_btemp: Get rid of 'enum adc_therm' ab8500_charger: Convert to the new USB OTG calls ab8500-btemp: AB8500 battery temperature driver ab8500-fg: A8500 fuel gauge driver ...
2012-03-26ab8500-btemp: AB8500 battery temperature driverArun Murthy
This driver is responsible for battery detection, obtaining battery temperature and monitor the battery temperature by taking precautionary measurements when battery temperature goes beyond or below the thresholds. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26Add I2C driver for Summit Microelectronics SMB347 Battery Charger.Bruce E. Robertson
Driver support for the Summit I²C battery charger. This is used in some Intel devices. Signed-off-by: Bruce E. Robertson <bruce.e.robertson@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-08DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave driversRenata Sayakhova
Signed-off-by: Renata Sayakhova <rsayakhova@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-06power_supply: Add DA9052 battery driverAshish Jangam
Driver for DA9052 battery charger. This driver depends on DA9052 MFD core dirver for definitions and methods. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-06bq20z75: Rename to sbs-batteryRhyland Klein
This driver for the bq20z75 implemented the register spec defined by the SBS standard. As this is not unique to this the TI part this was originally written for, we can generalize this driver to show its support for any SBS compliant battery. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04power_supply: Add LP8727 charger driverWoogyom Kim
National Semiconductor LP8727 is the battery charger with Micro/Mini USB interface. This IC includes below functions: - I2C interface for accessing user registers - Single input Li-Ion battery charger - Charger input ID detection from Micro/Mini USB - Multiplexing switches on USB, UART Signed-off-by: Woogyom Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04power_supply: Add initial Charger-Manager driverDonggeun Kim
Because battery health monitoring should be done even when suspended, it needs to wake up and suspend periodically. Thus, userspace battery monitoring may incur too much overhead; every device and task is woken up periodically. Charger Manager uses suspend-again to provide in-suspend monitoring. This patch allows to monitor battery health in-suspend state. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-31Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: gpio-charger: Fix checking return value of request_any_context_irq power_supply: MAX17042: Support additional properties max8903_charger: Allow platform data to be __initdata power_supply: Add charger driver for MAX8998/LP3974 power_supply: Add charger driver for MAX8997/8966 max17042_battery: Remove obsolete cleanup for clientdata twl4030_charger: Fix warnings wm831x_power: Support multiple instances wm831x_backup: Support multiple instances apm_power: Fix style error in macros s3c_adc_battery: Fix annotation for s3c_adc_battery_probe() bq20z75: Enable detection after registering bq20z75: Add support for external notification
2011-07-08power_supply: Add charger driver for MAX8998/LP3974Donggeun Kim
This patch supports power supply APIs for MAX8998/LP3974. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-07-08power_supply: Add charger driver for MAX8997/8966Donggeun Kim
MAX8997/8966 chip is a multi-function device which includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and Battery charging control. The driver for it is located at drivers/mfd. This patch supports battery charging control of MAX8997/8966 chip and provides power supply class information to userspace. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: KyungMin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-05-27Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: PXA: Use dev_pm_ops in z2_battery ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery ds2760_battery: Fix indexing of the 4 active full EEPROM registers power: Make test_power driver more dynamic. bq27x00_battery: Name of cycle count property max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) ARM: RX-51: Enable isp1704 power on/off isp1704_charger: Allow board specific powering routine gpio-charger: Add gpio_charger_resume power_supply: Add driver for MAX8903 charger
2011-05-27w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC supportClifton Barnes
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC. It was suggested to combine this functionality with the current ds2782 driver. Unfortunately, I'm unable to commit the time to refactoring this driver to that extent and I don't have a platform with the ds2782 part to validate that there are no regression issues by adding this functionality. [akpm@linux-foundation.org: use min_t()] Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-20power_supply: Add driver for MAX8903 chargerMyungJoo Ham
MAX8903 is an integrated battery charger and selector with two power inputs (USB and AC adapter). This driver enables the charger, handles interrupts, and provides power-supply-class information to userland. Tested on Exynos4 NURI / S5PC210 SLP7 boards. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-14power_supply: Add MAX17042 Fuel Gauge DriverMyungJoo Ham
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit registers. Besides, MAX17042 has much more features than MAX17040; e.g., a thermistor, current and current accumulation measurement, battery internal resistance estimate, average values of measurement, and others. This patch implements a driver for MAX17042. In this initial release, we have implemented the most basic features of a fuel gauge: measure the battery capacity and voltage. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-11-18power_supply: Add gpio charger driverLars-Peter Clausen
This patch adds a simple driver for chargers indicating their online status through a GPIO pin. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06power_supply: Makefile cleanupmatt mooney
Replace EXTRA_CFLAGS with ccflags-y; remove if-statements and replace with lists using the kbuild idiom. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-30power_supply: Add driver for TWL4030/TPS65950 BCI chargerGrazvydas Ignotas
TWL4030/TPS65950 is a multi-function device with integrated charger, which allows charging from AC or USB. This driver enables the charger and provides several monitoring functions. Tested on OMAP3 Pandora board. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-06power_supply: Add driver for TI BQ20Z75 gas gauge ICRhyland Klein
This driver depends on I2C and uses SMBUS for communication with the host. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-19power_supply: Add isp1704 charger detection driverHeikki Krogerus
NXP ISP1704 is Battery Charging Specification 1.0 compliant USB transceiver. This adds a power supply driver for ISP1704 and ISP1707 USB transceivers. Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-12Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: intel_mid_battery: Fix battery scaling intel_mid_battery: Fix the argument order to intel_scu_ipc_command olpc_battery: Fix build failure caused by sysfs changes Add s3c-adc-battery driver Intel MID platform battery driver Fix up trivial conflicts (battery drivers added from different branches) in drivers/power/{Kconfig,Makefile}
2010-08-05POWER: Add JZ4740 battery driver.Lars-Peter Clausen
Add support for the battery voltage measurement part of the JZ4740 ADC unit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1416/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-23Add s3c-adc-battery driverVasily Khoruzhick
s3c-adc-battery is driver for monitoring and charging battery on iPAQ H1930/H1940/RX1950. It depends on s3c-adc driver to get battery voltage and current. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-06-17Intel MID platform battery driverNithish Mahalingam
The PMIC Battery driver provides battery charging and battery gauge functionality on Intel MID platforms. This provides the basic functions. There are some USB drivers to merge before the selection of charging between the different USB power levels can be enabled. Moved to a platform device by Alek Du. Signed-off-by: Nithish Mahalingam <nithish.mahalingam@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-18power_supply: Add test_power driverAnton Vorontsov
Just a handy driver that is used for testing purposes. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-04-06Driver for Zipit Z2 battery chipMarek Vasut
This patch adds driver for Zipit Z2 battery chip called AER915. No details are known about the chip. The chip is available through I2C bus at address 0x55 and it's register 0x02 contains battery voltage. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-03-07power_supply: Enable power supply of max8925Haojian Zhuang
MAX8925 is a PMIC that contains charger component Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-15Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: power_supply_sysfs: Handle -ENODATA in a special way wm831x_backup: Remove unused variables gta02: Set pcf50633 charger_reference_current_ma pcf50633: Query charger status directly pcf50633: Properly reenable charging when the supply conditions change pcf50633: Get rid of charging restart software auto-triggering pcf50633: introduces battery charging current control pcf50633: Add ac power supply class to the charger wm831x: Factor out WM831x backup battery charger
2009-11-27collie: add battery driverThomas Kunze
This driver is based on tosa_battery.c.
2009-11-16wm831x: Factor out WM831x backup battery chargerMark Brown
The backup battery on WM831x is a separate IP block to the main PMU and is largely unrelated to the main supply functionality. Factor it out into a separate driver in order to reflect this and better support future hardware versions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-09-04power_supply: Add driver for the PMU on WM831x PMICsMark Brown
The WM831x PMICs provide power path management from three sources: a wall supply, USB and a battery with integrated charger. They also provide an additional backup supply with integrated for maintaining always on functionality such as the RTC and monitoring of power switches. After some initial configuration at startup the device operates autonomously, the driver simply provides reporting of the current state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
2009-06-30Add ds2782 battery gas gauge driverRyan Mallon
This patch adds a driver for ds2782 battery devices. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2009-06-08Add MAX17040 Fuel Gauge driverMinkyu Kang
The MAX17040 is a I2C interfaced Fuel Gauge systems for lithium-ion batteries This patch adds support the MAX17040 Fuel Gauge Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>