summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)Author
2013-01-09Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC fixes from Olof Johansson: "People are back from the holiday breaks, and it shows. Here are a bunch of fixes for a number of platforms: - A couple of small fixes for Nomadik - A larger set of changes for kirkwood/mvebu - uart driver selection, dt clocks, gpio-poweroff fixups, a few __init annotation fixes and some error handling improvement in their xor dma driver. - i.MX had a couple of minor fixes (and a critical one for flexcan2 clock setup) - MXS has a small board fix and a framebuffer bugfix - A set of fixes for Samsung Exynos, fixing default bootargs and some Exynos5440 clock issues - A set of OMAP changes including PM fixes and a few sparse warning fixups All in all a bit more positive code delta than we'd ideally want to see here, mostly from the OMAP PM changes, but nothing overly crazy." * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits) ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers ...
2013-01-06Power: gpio-poweroff: Fix documentation and gpio_is_validAndrew Lunn
Improve the documentation to clarify level vs edge triggered power off. Improve the comments for level vs edge triggered power off. Make use of gpio_is_valid(). Reported-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-03Drivers: power: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-30Merge tag 'omap-late-cleanups' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM cleanups for omap from Olof Johansson: "From Tony Lindgren: Here are few more patches to finish the omap changes for multiplatform conversion that are not strictly fixes, but were too complex to do with the dependencies during the merge window. Those are to move of serial-omap.h to platform_data, and the removal of remaining cpu_is_omap macro usage outside mach-omap2. Then there are several trivial fixes for typos and few minimal omap2plus_defconfig updates." * tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON OMAP2: Fix a typo - replace regist with register. ARM/omap: use module_platform_driver macro ARM: OMAP2+: PMU: Remove unused header ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support ARM: OMAP2+: enable devtmpfs and devtmpfs automount ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER ARM: OMAP2+: Drop plat/cpu.h for omap2plus ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage MAINTAINERS: Add an entry for omap related .dts files
2012-12-19Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery update, part 2, from Anton Vorontsov: "These are left overs that I didn't have time to review/apply before the merge window opened. I didn't want to "spoil" the first pull request with these late patches, so they were not included: - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch creates a battery monitor device instance, so that it can be probed. It was acked by the OMAP maintainer; - A couple of late bug fixes for the charger-manager: corrects corner cases for the battery full handling." * tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6: charger-manager: Fix bug when check dropped voltage after fullbatt event charger-manager: Fix bug related to checking fully charged state of battery ARM: OMAP: rx51: Register platform device for rx51_battery
2012-12-17ARM: OMAP2+: Drop plat/cpu.h for omap2plusTony Lindgren
The cpu_is_omap macros are now local to arch/arm/mach-omap2 in soc.h and plat/cpu.h can finally be dropped for omap2+. Thanks everybody for help with fixing the drivers. Note that we can now also remove the unused plat/cpu.h from smartreflex.c and isp.c as they will cause compile errors with ARCH_MULTIPLATFORM enabled. Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Jean Pihet <jean.pihet@newoldbits.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17charger-manager: Fix bug when check dropped voltage after fullbatt eventChanwoo Choi
This patch check difference value between current voltage of battery and desc->fullbatt_uV whether positve or negative number. If difference value is negative number when current voltage of battery is larger than desc->fullbatt_uV, charger-manager return immediately because battery is fully charged. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-17charger-manager: Fix bug related to checking fully charged state of batteryChanwoo Choi
This patch fix bug related to checking fully charged state of battery when charger-manager call is_full_charged() function. After reading property of charger/fuel-gauge through power_supply API, val.intval is more than 1. So, is_full_charged() function always return true. If true, battery means fully charged state. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-17Merge tag 'mfd-3.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
2012-12-14Merge tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery subsystem updates from Anton Vorontsov: "Highlights: - Two new drivers from Pali Rohár and N900 hackers: rx51_battery and bq2415x_charger. The drivers are a part of a solution to replace the proprietary Nokia BME stack - Power supply core now registers devices with a thermal cooling subsystem, so we can now automatically throttle charging. Thanks to Ramakrishna Pallala! - Device tree support for ab8500 and max8925_power drivers - Random fixups and enhancements for a bunch of drivers." * tag 'for-v3.8-merged' of git://git.infradead.org/battery-2.6: (22 commits) max8925_power: Add support for device-tree initialization ab8500: Add devicetree support for chargalg ab8500: Add devicetree support for charger ab8500: Add devicetree support for btemp ab8500: Add devicetree support for fuelgauge twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_* jz4740-battery: Use devm_request_and_ioremap jz4740-battery: Use devm_kzalloc bq27x00_battery: Fixup nominal available capacity reporting bq2415x_charger: Fix style issues bq2415x_charger: Add Kconfig/Makefile entries power_supply: Add bq2415x charger driver power_supply: Add new Nokia RX-51 (N900) power supply battery driver max17042_battery: Fix missing verify_model_lock() return value check ds2782_battery: Fix signedness bug in ds278x_read_reg16() lp8788-charger: Fix ADC channel names lp8788-charger: Fix wrong ADC conversion lp8788-charger: Use consumer device name on setting IIO channels power_supply: Register power supply for thermal cooling device power_supply: Add support for CHARGE_CONTROL_* attributes ...
2012-12-13Merge tag 'pm-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC power management and clock changes from Olof Johansson: "This branch contains a largeish set of updates of power management and clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a few around hotplug/suspend/resume on Exynos. It includes a split-up of some of the OMAP clock data into separate files which adds to the diffstat, but gross delta is fairly reasonable." * tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support watchdog: OMAP: fixup for ARM multiplatform support ARM: EXYNOS: Add flush_cache_all in suspend finisher ARM: EXYNOS: Remove scu_enable from cpuidle ARM: EXYNOS: Fix soft reboot hang after suspend/resume ARM: EXYNOS: Add support for rtc wakeup ARM: EXYNOS: fix the hotplug for Cortex-A15 ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n ARM: OMAP4: USB: power down MUSB PHY during boot ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ...
2012-12-13Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
2012-12-12Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management update from Zhang Rui: "Highlights: - Introduction of thermal policy support, together with three new thermal governors, including step_wise, user_space, fire_share. - Introduction of ST-Ericsson db8500_thermal driver and ST-Ericsson db8500_cpufreq_cooling driver. - Thermal Kconfig file and Makefile refactor. - Fixes for generic thermal layer, generic cpucooling, rcar thermal driver and Exynos thermal driver." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) Thermal: Fix DEFAULT_THERMAL_GOVERNOR Thermal: fix a NULL pointer dereference when generic thermal layer is built as a module thermal: rcar: add rcar_zone_to_priv() macro thermal: rcar: fixup the unit of temperature thermal: cpu cooling: allow module builds thermal: cpu cooling: use const parameter while registering Thermal: Add ST-Ericsson DB8500 thermal properties and platform data. Thermal: Add ST-Ericsson DB8500 thermal driver. drivers/thermal/Makefile refactor Exynos: Add missing dependency Refactor drivers/thermal/Kconfig thermal: cpu_cooling: Make 'notify_device' static Thermal: Remove the cooling_cpufreq_list. Thermal: fix bug of counting cpu frequencies. Thermal: add indent for code alignment. thermal: rcar_thermal: remove explicitly used devm_kfree/iounap() thermal: user_space: Add missing static storage class specifiers thermal: fair_share: Add missing static storage class specifiers thermal: step_wise: Add missing static storage class specifiers Thermal: Fix oops and unlocking in thermal_sys.c ...
2012-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxAnton Vorontsov
The merge is merely to fix conflicts before sending a pull request. Conflicts: drivers/power/ab8500_btemp.c drivers/power/ab8500_charger.c drivers/power/ab8500_fg.c drivers/power/abx500_chargalg.c drivers/power/max8925_power.c Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-30Merge tag 'omap-for-v3.8/devel-prcm-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm2 From Tony Lindgren: omap prcm changes via Paul Walmsley <paul@pwsan.com>: Some miscellaneous OMAP hwmod changes for 3.8, along with a PRM change needed for one of the hwmod patches to function. Basic test logs for this branch on top of Tony's omap-for-v3.8/clock branch at commit 558a0780b0a04862a678f7823215424b4e5501f9 are here: http://www.pwsan.com/omap/testlogs/hwmod_devel_a_3.8/20121121161522/ However, omap-for-v3.8/clock at 558a0780 does not include some fixes that are needed for a successful test. With several reverts, fixes, and workarounds applied, the following test logs were obtained: http://www.pwsan.com/omap/testlogs/TEST_hwmod_devel_a_3.8/20121121162719/ which indicate that the series tests cleanly. * tag 'omap-for-v3.8/devel-prcm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (49 commits) ARM: OMAP2+: omap_device: Correct resource handling for DT boot ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count ARM: OMAP2+: PRM: initialize some PRM functions early ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP2xxx: clock: drop obsolete clock data ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections ARM: AM33xx: clock: drop obsolete clock data ARM: OMAP3xxx: clk: drop obsolete clock data ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP44xx: clock: drop obsolete clock data ARM: OMAP4: clock: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP: hwmod: Cleanup !CONFIG_COMMON_CLK parts ARM: OMAP: clock: Switch to COMMON clk ARM: OMAP2: clock: Add 24xx data using common struct clk ARM: OMAP3: clock: Add 3xxx data using common struct clk ARM: AM33XX: clock: add clock data in common clock format ARM: OMAP4: clock: Add 44xx data using common struct clk ARM: OMAP2+: clock: add OMAP CCF convenience macros to mach-omap2/clock.h ... Some context conflicts due to nearby changes resolved in arch/arm/mach-omap2/io.c. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-11-28power: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28power: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28power: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-24power: Add simple poweroff-gpio driverJamie Lentin
Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-20power: da9052-battery: Convert to the new da9052 interrupt functionsFabio Estevam
Convert to the new da9052 interrupt functions, so that we can get rid of irq_base references. Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19max8925_power: Add support for device-tree initializationQing Xu
This patch adds support for initializing platform data from the device-tree description. Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19ab8500: Add devicetree support for chargalgRajanikanth H.V
This patch adds device tree support for charging algorithm driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19ab8500: Add devicetree support for chargerRajanikanth H.V
This patch adds device tree support for ab8500-charger driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19ab8500: Add devicetree support for btempRajanikanth H.V
This patch adds device tree support for battery-temperature-monitor driver Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19ab8500: Add devicetree support for fuelgaugeRajanikanth H.V
- This patch adds device tree support for fuelgauge driver - optimize bm devices platform_data usage and of_probe(...) Note: of_probe() routine for battery managed devices is made common across all bm drivers. - test status: - interrupt numbers assigned differs between legacy and FDT mode. Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19twl4030_charger: Change TWL4030_MODULE_* ids to TWL_MODULE_*Peter Ujfalusi
To facilitate upcoming cleanup in twl stack. No functional changes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19jz4740-battery: Use devm_request_and_ioremapMarcos Paulo de Souza
No functional changes. Just a cleanup. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19jz4740-battery: Use devm_kzallocMarcos Paulo de Souza
This is just a small cleanup, makes a logic a little bit more simplier. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-19bq27x00_battery: Fixup nominal available capacity reportingPali Rohár
We should not not report nominal available capacity if battery is not calibrated, as we don't want to represent bogus values in the sysfs and confuse userland. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18bq2415x_charger: Fix style issuesAnton Vorontsov
I hate doing these style fixups myself, but I also hate inconsitent code. Normally I just ask to resubmit the patch with the issues fixed, but N900 is special: I have a selfish interest in it. :) Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-11-18bq2415x_charger: Add Kconfig/Makefile entriesAnton Vorontsov
This commit adds Kconfig and Makefile entries so that we could actually build the driver. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-11-18power_supply: Add bq2415x charger driverPali Rohár
The bq2415x charger driver is needed for example on Nokia N900 for charging battery. Driver is part of open source project to replace proprietary battery management. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18power_supply: Add new Nokia RX-51 (N900) power supply battery driverPali Rohár
This driver exporting battery design capacity, temperature and voltage for battery in Nokia RX-51. This driver is needed for open source battery management on Nokia RX-51 (N900). Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18max17042_battery: Fix missing verify_model_lock() return value checkAlan Cox
The second error check is unreachable because the lock function isn't assigned to ret. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18ds2782_battery: Fix signedness bug in ds278x_read_reg16()Dan Carpenter
We need to check for negative values before doing the swab16() for the error handling to work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18lp8788-charger: Fix ADC channel namesKim, Milo
The name of ADC channel is configurable in the platform side. This name is referenced in the IIO consumer driver. To get the IIO channel, specific name in the platform data is used as an parameter of the iio_channel_get(). Thus, lp8788_adc_id platform data are replaced with specific names. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18lp8788-charger: Fix wrong ADC conversionKim, Milo
To get the battery voltage and temperature, IIO ADC functions are used. LP8788 ADC driver provides RAW and SCALE channel information. This patch fixes wrong ADC result. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Reviewed-by Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18lp8788-charger: Use consumer device name on setting IIO channelsKim, Milo
To get the ADC value for the battery voltage and temperature, LP8788 ADC driver is used. LP8788 charger driver is the consumer of LP8788 ADC driver. Thus, specific ADC driver name is required on getting the channel using iio_channel_get(). Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18power_supply: Register power supply for thermal cooling deviceRamakrishna Pallala
This patch registers the power supply as a cooling device if the power supply has support for charge throttling. Now with this change low level drivers need not register with thermal framework as it is automatically done by power supply framework. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18power_supply: Add support for CHARGE_CONTROL_* attributesRamakrishna Pallala
Add support for power supply attributes CHARGE_CONTROL_LIMIT and CHARGE_CONTROL_LIMIT_MAX. These new attributes will enable the user space to implement custom charging algorithms based on platform state. Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-17generic-adc-battery: Pointer math issue in gab_probe()Dan Carpenter
psy->properties is an enum (32 bit type) so adding sizeof() puts us four times further along than we intended. It should be cast to a char pointer before doing the math. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-16generic-adc-battery: Fix checking return value of request_any_context_irqAxel Lin
On failure, request_any_context_irq() returns a negative value. On success, it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-05Thermal: Pass zone parameters as argument to tzd_registerDurgadoss R
This patch adds the thermal zone parameter as an argument to the tzd_register() function call; and updates other drivers using this function. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-10-15ARM: OMAP: SmartReflex: pass device dependent data via platform dataJean Pihet
Remove the device dependent code (ex. cpu_is_xxx()) and settings from the driver code and instead pass them via the platform data. This allows a clean separation of the driver code and the platform code, as required by the move of the platform header files to include/linux/platform_data. Note about the smartreflex functional clocks: the smartreflex fclks are derived from sys_clk and have the same name as the main_clk from the hwmod entry, in order for the SmartReflex driver to request the fclk (using clk_get(dev, "fck")). Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Thermal updates from Len Brown: "The generic Linux thermal layer is gaining some new capabilities (generic cooling via cpufreq) and some new customers (ARM). Also, an ACPI EC bug fix plus a regression fix." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (30 commits) tools/power/acpi/acpidump: remove duplicated include from acpidump.c ACPI idle, CPU hotplug: Fix NULL pointer dereference during hotplug cpuidle / ACPI: fix potential NULL pointer dereference ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop ACPI: EC: Make the GPE storm threshold a module parameter thermal: Exynos: Fix NULL pointer dereference in exynos_unregister_thermal() Thermal: Fix bug on cpu_cooling, cooling device's id conflict problem. thermal: exynos: Use devm_* functions ARM: exynos: add thermal sensor driver platform data support thermal: exynos: register the tmu sensor with the kernel thermal layer thermal: exynos5: add exynos5250 thermal sensor driver support hwmon: exynos4: move thermal sensor driver to driver/thermal directory thermal: add generic cpufreq cooling implementation Fix a build error. thermal: Fix potential NULL pointer accesses thermal: add Renesas R-Car thermal sensor support thermal: fix potential out-of-bounds memory access Thermal: Introduce locking for cdev.thermal_instances list. Thermal: Unify the code for both active and passive cooling Thermal: Introduce simple arbitrator for setting device cooling state ...
2012-10-09Merge branches 'fixes-for-37', 'ec' and 'thermal' into releaseLen Brown
2012-10-09Merge branch 'release' of ↵Len Brown
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux into thermal Conflicts: drivers/staging/omap-thermal/omap-thermal-common. OMAP supplied dummy TC1 and TC2, at the same time that the thermal tree removed them from thermal_zone_device_register() drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c propogate the upstream MAX_IDR_LEVEL re-name to prevent a build failure Previously-fixed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-08Merge tag 'for_3.7-fixes-pm' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-v3.7-rc1/fixes-pm OMAP PM related fixes for v3.7-rc
2012-10-07Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "1. New drivers: - Marvell 88pm860x charger and battery drivers; - Texas Instruments LP8788 charger driver; 2. Two new power supply properties: whether a battery is authentic, and chargers' maximal currents and voltages; 3. A lot of TI LP8727 Charger cleanups; 4. New features for Charger Manager, mainly now we can disable specific regulators; 5. Random fixes and cleanups for other drivers." Fix up trivial conflicts in <linux/mfd/88pm860x.h> * tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits) pda_power: Remove ac_draw_failed goto and label charger-manager: Add support sysfs entry for charger charger-manager: Support limit of maximum possible charger-manager: Check fully charged state of battery periodically lp8727_charger: More pure cosmetic improvements lp8727_charger: Fix checkpatch warning lp8727_charger: Add description in the private data lp8727_charger: Fix a typo - chg_parm to chg_param lp8727_charger: Make some cosmetic changes in lp8727_delayed_func() lp8727_charger: Clean up lp8727_charger_changed() lp8727_charger: Return if the battery is discharging lp8727_charger: Make lp8727_charger_get_propery() simpler lp8727_charger: Make lp8727_ctrl_switch() inline lp8727_charger: Make lp8727_init_device() shorter lp8727_charger: Clean up lp8727_is_charger_attached() lp8727_charger: Use specific definition lp8727_charger: Clean up lp8727 definitions lp8727_charger: Use the definition rather than enum lp8727_charger: Fix code for getting battery temp lp8727_charger: Clear interrrupts at inital time ...
2012-10-02ARM: OMAP: SmartReflex: fix error path in init functionJean Pihet
Fix the error handling path in omap_sr_probe to correctly de-allocate resources in case of problems. Signed-off-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>