summaryrefslogtreecommitdiff
path: root/drivers/s390/net
AgeCommit message (Collapse)Author
2012-05-16s390/qdio: Cleanup error handling to driversJan Glauber
Various improvements of qdio error reporting to the upper-layer drivers (qeth, zfcp): - Split QDIO_ERROR_ACTIVATE_CHECK_CONDITION into: QDIO_ERROR_ACTIVATE: qdio termination interrupt QDIO_ERROR_GET_BUF_STATE: QIOASSIST eqbs error QDIO_ERROR_SET_BUF_STATE: QIOASSIST sqbs error Add QDIO_ERROR_FATAL / QDIO_ERROR_TEMPORARY masks to ease recovery decision in upper-layer drivers. - Don't (ab-)use qdio handler errors as return codes for do_QDIO but use standard error codes: -ENOBUFS: temporary target CC=2 condition -EBUSY: unresolved SIGA-W CC=2 busy condition -EIO: I/O error (CC=1, CC=3) - Remove unneeded memory clobber from SIGA-R - Remove EX_TABLE entry on SIGA-W, we want to see these errors Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-04-24qeth: Use blkt defaults for OSA Express 4Stefan Raspl
The previous blkt defaults for OSA Express 4 cards produced inadequate performance for streaming workloads. The present patch will apply a set of more appropriate defaults. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24qeth: allow change of blkt default valuesUrsula Braun
There exist qeth sysfs blkt attributes to change the default blkt values. But blkt changes are reset during online setting due to a 2nd invocation of qeth_determine_capabilites(). This patch makes sure blkt default values are configured during 1st run of qeth_determine_capabilities() only. Thus blkt changes are kept during online setting. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reported-by: Horst Hartmann <horst.hartmann@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-08lcs: Return zero from ccwgroup devs set_offline functionKlaus-Dieter Wacker
A return code of non-zero of the devs ccwgroup set_offline function leaves the dev in online state. Having done a partly offlining may leave the dev in unusable state. To make sure the dev is set to offline, zero is returned. A setup trace entry is written in case the offlining steps encountered some trouble. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08qeth: meaningful return code for set_mac_addressUrsula Braun
Setting an invalid mac-address for a qeth layer2 device returns with a strange error code: # ip link set hsi1 address 00:00:00:00:00:01 RTNETLINK answers: Unknown error 18446744073709486085 Problem is caused by wrong usage of the return_code field within structure qeth_ipa_cmd. With this patch the ip command above returns SIOCSIFHWADDR: Invalid argument Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08ctcm: use correct idal word list for ctcmpcBelinda Thompson
Communication Server Linux uses the ctcmpc code of the ctcm driver. Sending problems have shown up caused by a wrong idal word list for the first ccw. Function ctcmpc_chx_txdone() invokes the function to prepare the idal word list without setting an appropriate length for the first ccw, which may lead to an incomplete idal word list. This patch sets the maximum buffer size as data length of the first ccw. Thus correct idal word lists are guaranteed in all cases. Signed-off-by: Belinda Thompson <belindat@us.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08ctcm: make ctcmpc debugging compilableUrsula Braun
ctcmpc debugging can be activated defining constant DEBUGCCW. The debugging part contains wrong checks for 64 bit addresses. Thus the debugging version does not compile. This patch corrects the 64-bit address checks to make it compilable. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reviewed-by: Belinda Thompson <belindat@us.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-08qeth: synchronize discipline module loadingFrank Blaschka
During system startup udev may try to configure devices in parallel so we have to synchronize discipline module loading. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08qeth: add wake_up on write channelUrsula Braun
To send commands on the write channel 8 buffers exist. If all 8 buffers are used, a wait is triggered on the write channel. When such buffer are freed, a wake_up is needed. This patch adds the missing wake_up in qeth_release_buffer(). This fix is especially important when running Communications Controller for Linux on System z. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08qeth: add query OSA address table supportFrank Blaschka
Add qeth device private ioctl to query the OSA address table. This helps debugging hw related problems. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-02qeth: Move away from using neighbour entries in qeth_l3_fill_header()David Miller
We've moving to a model where dst_entry objects to not have a reference to the associated neighbour entry, instead such neighbours must be looked up on-demand. Here in qeth_l3_fill_header() it's actually much simpler to use the information in the route itself. The code is already conditionalized upon protocol type. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
2012-01-25Driver core: driver_find() drops reference before returningAlan Stern
As part of the removal of get_driver()/put_driver(), this patch (as1510) changes driver_find(); it now drops the reference it acquires before returning. The patch also adjusts all the callers of driver_find() to remove the now unnecessary calls to put_driver(). In addition, the patch adds a warning to driver_find(): Callers must make sure the driver they are searching for does not get unloaded while they are using it. This has always been the case; driver_find() has never prevented a driver from being unregistered or unloaded. Hence the patch will not introduce any new bugs. The existing callers all seem to be okay in this respect, however I don't understand the video drivers well enough to be certain about them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Kyungmin Park <kyungmin.park@samsung.com> CC: Andy Walls <awalls@md.metrocast.net> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits) [S390] disassembler: mark exception causing instructions [S390] Enable exception traces by default [S390] return address of compat signals [S390] sysctl: get rid of dead declaration [S390] dasd: fix fixpoint divide exception in define_extent [S390] dasd: add sanity check to detect path connection error [S390] qdio: fix kernel panic for zfcp 31-bit [S390] Add s390x description to Documentation/kdump/kdump.txt [S390] Add VMCOREINFO_SYMBOL(high_memory) to vmcoreinfo [S390] dasd: fix expiration handling for recovery requests [S390] outstanding interrupts vs. smp_send_stop [S390] ipc: call generic sys_ipc demultiplexer [S390] zcrypt: Fix error return codes. [S390] zcrypt: Rework length parameter checking. [S390] cleanup trap handling [S390] Remove Kerntypes leftovers [S390] topology: increase poll frequency if change is anticipated [S390] entry[64].S improvements [S390] make arch/s390 subdirectories depend on config option [S390] kvm: move cmf host id constant out of lowcore ... Fix up conflicts in arch/s390/kernel/{smp.c,topology.c} due to the sysdev removal clashing with "topology: get rid of ifdefs" which moved some of that code around.
2011-12-27[S390] qdio: fix kernel panic for zfcp 31-bitSteffen Maier
The queue_start_poll function pointer field in struct qdio_initialize had to change its type and become a vector of function pointers to support asynchronous delivery of storage blocks so rename the field to make the type change explicit and ensure no other user of qdio tries to use the field the old way. During setting up the qdio queues, only dereference vector elements if the vector is actually allocated. Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-20qeth: recovery through asynchronous deliveryEinar Lueck
If recovery is triggered in presence of pending asynchronous deliveries of storage blocks we do a forced cleanup after the corresponding tasklets are completely stopped and trigger appropriate notifications for the correspondingerror state. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20qeth: improve recovery during resource shortageFrank Blaschka
In case there are no system resources to run a recovery we have to clear recovery bitmasks so a further automatic or manual driven recovery can fix up the device. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20netiucv: allow multiple interfaces to same peerUrsula Braun
The NETIUCV device driver allows to connect a Linux guest on z/VM to another z/VM guest based on the z/VM communication facility IUCV. Multiple output paths to different guests are possible, as well as multiple input paths from different guests. With this feature, you can configure multiple point-to-point NETIUCV interfaces between your Linux on System z instance and another z/VM guest. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20qeth: forbid recovery during shutdownUrsula Braun
A recovery does not make sense during shutdown and may even cause an error like this: qeth 0.0.f503: A recovery process has been started for the device Badness at drivers/s390/cio/qdio_main.c:1156 Modules linked in: autofs4 sunrpc dm_multipath scsi_dh scsi_mod qeth_l3 ipv6 vmu r qeth qdio ccwgroup ext3 jbd mbcache dasd_eckd_mod dasd_mod dm_mirror dm_region _hash dm_log dm_mod [last unloaded: scsi_wait_scan] CPU: 3 Not tainted 2.6.32-202.el6.s390x #1 Process qeth_recover (pid: 1498, task: 000000003efe2040, ksp: 000000003d5e3b80) Krnl PSW : 0404200180000000 000003c000be6da8 (qdio_int_handler+0x88/0x43c [qdio] ) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: ffffffffffff3bac 0000000000000005 0000000000000000 fffffffffffffff4 0000000000000000 000000000000000c 0000000000000000 000000003ca97000 0000000000000380 fffffffffffffff4 000000003f22d800 000000003f22c478 000003c000bdf000 000003c000bea270 000000003f447e10 000000003f447db0 Krnl Code: 000003c000be6d9a: c21f00000004 clfi %r1,4 000003c000be6da0: a7c40021 brc 12,3c000be6de2 000003c000be6da4: a7f40001 brc 15,3c000be6da6 >000003c000be6da8: e320a0080004 lg %r2,8(%r10) 000003c000be6dae: a7390003 lghi %r3,3 000003c000be6db2: a72b0178 aghi %r2,376 000003c000be6db6: a7490001 lghi %r4,1 000003c000be6dba: a7590000 lghi %r5,0 Call Trace: ([<000000000080ee80>] __per_cpu_offset+0x0/0x200) [<00000000003d90e8>] ccw_device_call_handler+0x70/0xcc [<00000000003d83a2>] ccw_device_irq+0x82/0x180 [<00000000003cc6a8>] do_IRQ+0x16c/0x1ec [<0000000000118abe>] io_return+0x0/0x8 [<000003c000d04c74>] qeth_determine_capabilities+0x208/0x5cc [qeth] ([<000003c000d04c4a>] qeth_determine_capabilities+0x1de/0x5cc [qeth]) [<000003c000d0a6e0>] qeth_core_hardsetup_card+0x160/0x1258 [qeth] [<000003c000f49f56>] __qeth_l3_set_online+0x132/0xb14 [qeth_l3] [<000003c000f4ac70>] qeth_l3_recover+0x168/0x224 [qeth_l3] [<000000000016e210>] kthread+0xa4/0xac [<0000000000109c6e>] kernel_thread_starter+0x6/0xc [<0000000000109c68>] kernel_thread_starter+0x0/0xc The patch forbids start of a recovery once qeth shutdown is running. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20qeth: suspicious rcu_dereference_check in recoveryUrsula Braun
qeth layer3 recovery invokes its set_multicast_list function, which invokes function __vlan_find_dev_deep requiring rcu_read_lock or rtnl lock. This causes kernel messages: kernel: [ INFO: suspicious rcu_dereference_check() usage. ] kernel: --------------------------------------------------- kernel: net/8021q/vlan_core.c:70 invoked rcu_dereference_check() without protection! kernel: stack backtrace: kernel: CPU: 0 Not tainted 3.1.0 #9 kernel: Process qeth_recover (pid: 2078, task: 000000007e584680, ksp: 000000007e3e3930) kernel: 000000007e3e3d08 000000007e3e3c88 0000000000000002 0000000000000000 kernel: 000000007e3e3d28 000000007e3e3ca0 000000007e3e3ca0 00000000005e77ce kernel: 0000000000000000 0000000000000001 ffffffffffffffff 0000000000000001 kernel: 000000000000000d 000000000000000c 000000007e3e3cf0 0000000000000000 kernel: 0000000000000000 0000000000100a18 000000007e3e3c88 000000007e3e3cc8 kernel: Call Trace: kernel: ([<0000000000100926>] show_trace+0xee/0x144) kernel: [<00000000005d395c>] __vlan_find_dev_deep+0xb0/0x108 kernel: [<00000000004acd3a>] qeth_l3_set_multicast_list+0x976/0xe38 kernel: [<00000000004ae0f4>] __qeth_l3_set_online+0x75c/0x1498 kernel: [<00000000004aefec>] qeth_l3_recover+0xc4/0x1d0 kernel: [<0000000000185372>] kthread+0xa6/0xb0 kernel: [<00000000005ed4c6>] kernel_thread_starter+0x6/0xc kernel: [<00000000005ed4c0>] kernel_thread_starter+0x0/0xc The patch makes sure the rtnl lock is held once qeth recovery invokes its set_multicast_list function. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-05net: Rename dst_get_neighbour{, _raw} to dst_get_neighbour_noref{, _raw}.David Miller
To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Roland Dreier <roland@purestorage.com>
2011-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The forcedeth changes had a conflict with the conversion over to atomic u64 statistics in net-next. The libertas cfg.c code had a conflict with the bss reference counting fix by John Linville in net-next. Conflicts: drivers/net/ethernet/nvidia/forcedeth.c drivers/net/wireless/libertas/cfg.c
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: Reduce CPU consumption through less SIGA-r callsEinar Lueck
Patch avoids SIGA-r calls in case of SIGA-r required. It only calls SIGA-r if a threshold of free buffer is reached. CPU consumption is reduced as a consequence. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: l3 fix rcu splat in xmitFrank Blaschka
when use dst_get_neighbour to get neighbour, we need rcu_read_lock to protect, since dst_get_neighbour uses rcu_dereference. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16netiucv: reinsert dev_alloc_name for device namingUrsula Braun
Invocation of dev_alloc_name() is re-inserted, because the created net_device name is used to create the device name for the iucv bus. This device is created before the register_netdev call. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: remove WARN_ON leftoverChristian Borntraeger
The patch "qeth: exploit asynchronous delivery of storage blocks" added a WARN_ON in qeth_schedule_recovery. A device recovery should not cause a kernel warning. This is obviously a debugging left-over that we forgot to remove. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16qeth: return with -EPERM if sniffing is not enabledUrsula Braun
Without appropriate configuration at the SE, a HiperSockets device cannot be used for sniffing. Setting the sniffer attribute is rejected with -EPERM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-10net: Fix references to deleted NET_ETHERNET Kconfig setting.David S. Miller
Change them over to plain "ETHERNET" Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-30[S390] sparse: fix sparse static warningsMartin Schwidefsky
Make functions and data static to avoid sparse warnings. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] fix mismatch in summation of I/O IRQ statisticsPeter Oberparleiter
Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-09-15qeth: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com> Cc: linux390@de.ibm.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: add support for af_iucv HiperSockets transportFrank Blaschka
This patch extends the HiperSockets device driver to send and receive af_iucv traffic over HiperSockets transport. TX: Driver uses new asynchronous delivery of storage blocks to pass flow control/congestion information from the HiperSockets microcode to the af_iucv socket. RX: Memory for incoming traffic is preallocated and passed to HiperSockets layer. If receiver is not capable to clean its buffers shared with HiperSockets and pass new memory to the HiperSockets layer this will cause flow control/congestion events on the sender. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: exploit asynchronous delivery of storage blocksEinar Lueck
This patch exploits the QDIO support for asynchronous delivery of storage blocks for Hipersockets. The exploitation is not configured per default and may be enabled via the function qeth_configure_cq. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: support forced signal adapter indicationsEinar Lueck
This patch ensures that signal adapter commands are issued if they are indicated to be required. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qdio: support asynchronous delivery of storage blocksfrank.blaschka@de.ibm.com
This patch introduces support for asynchronous delivery of storage blocks for Hipersockets. Upper layers may exploit this functionality to reuse SBALs for which the delivery status is still pending. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: do not apply priority queuing to HiperSocketsUrsula Braun
OSA cards can be configured to support 1 or 4 output queues. This does not apply to HiperSockets. This patch limits determination of the configured number of output queues to OSA cards only, but excludes HiperSockets. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13qeth: l3 ipv6 vlan not working on shared OSA chpidFrank Blaschka
In layer 3 mode IPv6 over VLAN does not work on newer OSA levels in case the sender and receiver run on the same (shared) OSA adapter. Keep vlan info in the skb so the qdio header is filled with the required vlan tag. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-21qeth: do vlan cleanupJiri Pirko
- unify vlan and nonvlan rx path - kill card->vlangrp and qeth_l3_vlan_rx_register Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18net: Abstract dst->neighbour accesses behind helpers.David S. Miller
dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-rxon.c drivers/net/wireless/rtlwifi/pci.c net/netfilter/ipvs/ip_vs_core.c
2011-06-07net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06[S390] qdio: Split SBAL entry flagsJan Glauber
The qdio SBAL entry flag is made-up of four different values that are independent of one another. Some of the bits are reserved by the hardware and should not be changed by qdio. Currently all four values are overwritten since the SBAL entry flag is defined as an u32. Split the SBAL entry flag into four u8's as defined by the hardware and don't touch the reserved bits. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-05-18qeth: use ndo_set_features callback for initial setup and recoveryFrank Blaschka
This patch uses the ndo_set_features callback during normal device startup or recovery to turn on hardware RX checksum. Patch was done with much help from Michal Miroslaw, thx!!! Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13ctcm: get rid of compile warningUrsula Braun
-Wunused-but-set-variable generates compile warnings. The affected variables are removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13lcs: get rid of compile warningHeiko Carstens
-Wunused-but-set-variable generates a compile warning for lcs' tasklet function. Invoked functions contain already error handling; thus additional return code checking is not needed here. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13claw: remove unused return code handlingHeiko Carstens
Remove unused return code handling. The claw driver is mostly dead, so just make sure it keeps compiling without warnings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-20 07:09:12 (GMT)