summaryrefslogtreecommitdiff
path: root/drivers/s390/net
AgeCommit message (Collapse)Author
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-13s390: ctcm_mpc: Fix build after netdev refcount changes.David S. Miller
Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04qeth: tagging with VLAN-ID 0Ursula Braun
This patch adapts qeth to handle tagged frames with VLAN-ID 0 and with or without priority information in the tag. It enables qeth to receive priority-tagged frames on a base interface, for example from z/OS, without configuring an additional VLAN interface. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/qlcnic/qlcnic_init.c net/ipv4/ip_output.c
2010-09-27s390: use free_netdev(netdev) instead of kfree()Vasiliy Kulikov
Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08qeth: NAPI support for l2 and l3 disciplineFrank Blaschka
This patch adds NAPI support to the qeth layer 2 and layer 3 discipline. It is important to understand that we can not enable/disable IRQs as usual, we have to use the corresponding new QDIO interface. Also to not overdraw the budget we have to stop and restart buffer processing at any point during processing a bulk of QDIO buffers. Having the driver NAPI enabled it is possible to turn on GRO for the layer 3 discipline. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08Kconfig: have CCWGROUP depend on CLAWMike Frysinger
Since the claw code calls ccwgroup_remove_ccwdev(), we need to make sure CCWGROUP is enabled when CLAW is enabled. Otherwise we hit fun undefined references at build time: ERROR: "ccwgroup_remove_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_probe_ccwdev" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_register" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_driver_unregister" [drivers/s390/net/claw.ko] undefined! ERROR: "ccwgroup_create_from_string" [drivers/s390/net/claw.ko] undefined! Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08qeth: Use %pI6Joe Perches
Format an ipv6 address using vsprintf extensions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) ctcm: rename READ/WRITE defines to avoid redefinitions claw: rename READ/WRITE defines to avoid redefinitions phylib: available for any speed ethernet can: add limit for nframes and clean up signed/unsigned variables pkt_sched: Check .walk and .leaf class handlers pkt_sched: Fix sch_sfq vs tc_modify_qdisc oops caif-spi: Bugfix SPI_DATA_POS settings were inverted. caif: Bugfix - Increase default headroom size for control channel. net: make netpoll_rx return bool for !CONFIG_NETPOLL Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Bluetooth: Change default L2CAP ERTM retransmit timeout Bluetooth: Fix endianness issue with L2CAP MPS configuration net: Use NET_XMIT_SUCCESS where possible. isdn: mISDN: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed isdn: avm: call pci_disable_device() if pci_probe() failed usbnet: rx_submit() should return an error code. pkt_sched: Add some basic qdisc class ops verification. Was: [PATCH] sfq: add dummy bind/unbind handles pkt_sched: sch_sfq: Add dummy unbind_tcf and put handles. Was: [PATCH] sfq: add dummy bind/unbind handles ...
2010-08-12ctcm: rename READ/WRITE defines to avoid redefinitionsUrsula Braun
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to CTCM_READ/CTCM_WRITE to avoid warnings. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-12claw: rename READ/WRITE defines to avoid redefinitionsHeiko Carstens
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to READ_CHANNEL/WRITE_CHANNEL which should suffice. Fixes this: In file included from drivers/s390/net/claw.c:93: drivers/s390/net/claw.h:78:1: warning: "WRITE" redefined In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/debug.h:12, from drivers/s390/net/claw.c:68: include/linux/fs.h:156:1: warning: this is the location of the previous definition Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-09[S390] cmm, smsgiucv_app: convert sender to uppercaseHendrik Brueckner
The sender kernel parameter contains a z/VM user ID where alphabetic characters must be specified in uppercase. Allow users to specify lowercase characters and convert the sender string to uppercase at module initialization. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-07-23qeth: avoid useless removal of multicast addressesUrsula Braun
Function qeth_l2_remove_device invokes qeth_l2_del_all_mc at the end. This is needless, because it is already called in the offline function. And even more this is invalid, because multicast addresses cannot be removed in DOWN state. Thus this patch deletes invocation of qeth_l2_del_all_mc in function qeth_l2_remove_device. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Use memdup_user when user data is immediately copied into the ↵Julia Lawall
allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: return zero from reply callback functionsUrsula Braun
Reply callback functions in qeth should return zero if command response consists of one part only, otherwise qeth continues waiting for further parts of the command response. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23claw: A claw device is a group of just 2 ccw devicesUrsula Braun
When creating a claw device, just 2 subchannels have to be grouped. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: avoid loop if ipa command response is missingUrsula Braun
If qeth issues an ipa command, but for some reasons the response never comes back, qeth reaches a timeout. Reset the irq_pending flag of the write channel in timeout handling code and trigger a recovery to avoid endless looping for the following ipa command. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: serialize sysfs-triggered device configurationsUrsula Braun
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: Clear mac_bits field when switching between Layer 2 and Layer 3Carsten Otte
This patch fixes a problem that occurs when switching from layer 3 to layer 2 mode. Resetting this mac_bits makes sure that we retrieve our mac address from the card, otherwise the interface simply would'nt work. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23qeth: IP address takeover flag settingKlaus-Dieter Wacker
The qeth IP address flag setting is possible when device is offline. When setting device online afterwards the current set IP addresses have to be correctly registered with the device regarding the IP address takeover attribute. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: handle missing z/VM authorization of OSXUrsula Braun
For z/VM guest operating systems, OSX CHPIDs can only be used, if LPAR and z/VM userID are explicitly authorized through the Service Element. Issue a message if this SE-authorization is missing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: specify correct function level for OSN devicesUrsula Braun
OSN devices use the same function level as OSD devices. This patch adds OSN-devices to the initialization function for func_level. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: fix page breaks in hw headersFrank Blaschka
Turning on memory debugging showed there could be page breaks in hardware headers. OSA does not allow this so we had to add code to bounce the header in case there is a page break. This patch also fixes a problem in case the skb->data part of a fragmented skb spreads multiple pages. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: fix use after free for qeths debug areaCarsten Otte
The function qeth_free_buffer_pool is called _after_ the per-card debug area has been released. This debug message is not all that usefull anyway, and thus gets removed. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: Fold qeth_qerr debug areaCarsten Otte
This patch removes the qerr debug area. Most info that goes in here is logged to the card's local debug area already, those duplicates are removed. All other elements are moved to the card's local debug area. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: Fold qeth_misc debug areaCarsten Otte
This patch removes the misc debug area. Instead of logging the entire skb we just log a pointer to it into the card's local debug area in qeth_core_get_next_skb. Other then that, this debug area is not used anywhere. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: Fold qeth_sense debug areaCarsten Otte
This patch removes the sense debug area completely. Despite the name this debug area makes no sense at all because it's unused completely. Ouch. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: Fold qeth_trace debug areaCarsten Otte
This patch removes the qeth_trace debug area. All relevant data is logged into either qeth_setup or into each card's own debug area. Superfluous information (such as the card number when logging into the card's own debug area) is removed without replacement. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: Add new s390 debug feature for each qeth cardCarsten Otte
This patch adds a debug area for each qeth card. This debug area will replace various other debug areas that are global for all cards handled by the device driver. On crash dump analysis this makes life easier when trying to find out what's going on with an interface. Also, the forest of debug areas for this device driver is significantly cleared up. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23qeth: Rework qeth_dbf_longtextCarsten Otte
This patch decouples qeth_dbf_longtext from qeth's static debug array. The function only uses one member anyway. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23smsgiucv: guarantee single iucv connect in thawUrsula Braun
If another smsgiucv_app device exists, suspend / resume fails with iucv path list corruption, because the same iucv_path_connect is called twice. The patch introduces a flag to save connect status of the smsgiucv path to make sure iucv_path_connect in smsg_pm_restore_thaw is called only once. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-18qeth: support the new OSA CHPID types OSX and OSMUrsula Braun
The qeth driver is enabled to support the new OSA CHPID types OSX and OSM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18drivers/s390/net: Drop memory allocation castJulia Lawall
Drop cast on the result of kmalloc and similar functions. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; @@ - (T *) (\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17[S390] qdio: remove API wrappersJan Glauber
Remove qdio API wrappers used by qeth and replace them by calling the appropriate functions directly. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-16qeth: synchronize configuration interfaceFrank Blaschka
Synchronize access to the drivers configuration interface. Also do not allow configuration changes during online/offline transition. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16qeth: new message if OLM limit is reachedUrsula Braun
z/OS may activate Optimized Latency Mode (OLM) for a connection through an OSA Express3 adapter, which reduces the number of allowed concurrent connections, if adapter is used in shared mode. Create a meaningful message, if activation of an OSA-connection fails due to an active OLM-connection on the shared OSA-adapter. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16qeth: exploit HW TX checksummingFrank Blaschka
OSA supports HW TX checksumming in layer 3 mode. Enable this feature and remove software fallback used for TSO. Cleanup checksum bits to indicate OSA can do checksumming only for IPv4 TCP and UDP. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-04-03net: convert multicast list to list_headJiri Pirko
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-22qeth: l3 fix build error in ipv6 addr list handlingFrank Blaschka
Adapt qeth l3 to: commit c2e21293c054817c42eb5fa9c613d2ad51954136 (ipv6: convert addrconf list to hlist) converted lst_next member of inet6_ifaddr struct to a hlist. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-17net: convert multiple drivers to use netdev_for_each_mc_addr, part7Jiri Pirko
In mlx4, using char * to store mc address in private structure instead. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits) bridge: ensure to unlock in error path in br_multicast_query(). drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages sky2: Avoid rtnl_unlock without rtnl_lock ipv6: Send netlink notification when DAD fails drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant ipconfig: Handle devices which take some time to come up. mac80211: Fix memory leak in ieee80211_if_write() mac80211: Fix (dynamic) power save entry ipw2200: use kmalloc for large local variables ath5k: read eeprom IQ calibration values correctly for G mode ath5k: fix I/Q calibration (for real) ath5k: fix TSF reset ath5k: use fixed antenna for tx descriptors libipw: split ieee->networks into small pieces mac80211: Fix sta_mtx unlocking on insert STA failure path rt2x00: remove KSEG1ADDR define from rt2x00soc.h net: add ColdFire support to the smc91x driver asix: fix setting mac address for AX88772 ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}. net: Fix dev_mc_add() ...
2010-03-10qeth: change checksumming default for HiperSocketsFrank Blaschka
Deactivate inbound checksumming on HiperSocket is a valid but dangerous optimization in case the frame is routed from an OSA network to an HiperSockets network. To go for sure we change the default to software checksumming. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: no recovery after layer mismatch (z/VM NICs)Ursula Braun
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: set promisc off after trace disabling failureUrsula Braun
If HiperSockets Network Traffic Analyzer is switched off, but trace disabling fails somehow, the qeth driver does not switch off its promisc mode status. A following sniffer reactivation fails, since qeth does not see a need to reenable tracing. At the same time the code analyzing results of trace commands is restructured. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: l3 send dhcp in non pass thru modeFrank Blaschka
dhcp frames are valid IPv4 packets so there is no need to send them in pass thru mode. This allows dhcp packets to pass HiperSockets. Also the dhcp release frame is send out correctly with this patch. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10qeth: enable kmsg hash processing in qeth_core_sys.cUrsula Braun
provide qeth kmsg definitions to enable hash string generation for kernel message created with dev_err(). Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08[S390] smsgiucv_app: deliver z/VM CP special messages (SMSG) as ueventsHendrik Brueckner
The smsgiucv_app driver registers a callback with the smsgiucv driver to receive z/VM CP special messages (SMSG) starting with "APP". When the callback is called for special messages, the driver creates an uevent for the received message. The uevent consists of additional environment data containing the message prefix ("APP"), message sender, and message content. udev rules can be used to trigger application specific actions through matching the content or sender of the special message. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v0.10.2 at 2024-11-06 23:32:05 (GMT)