summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2012-08-28s390/dasd: fix ioctl return valueHeiko Carstens
For unimplemented ioctls the dasd driver should return -ENOTTY. Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-08-08s390/sclp_sdias: Add missing break and "fall through"Michael Holzheu
If the last block of the HSA is read, EVSTATE_ALL_STORED is returned by SCLP. Because of a missing break in the switch statement two trace entries are written in this case: "all stored" and "part stored". This patch adds the missing break and also adds a "fall through" comment to improve the readability. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reported-by: David A Gilbert <DavidAGilbert@uk.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking updates and fixes from David Miller: 1) Reinstate the no-ref optimization for input route lookups in ipv4 to fix some routing cache removal perf regressions. 2) Make TCP socket pre-demux work on ipv6 side too, from Eric Dumazet. 3) Get RX hash value from correct place in be2net driver, from Sarveshwar Bandi. 4) Validation of FIB cached routes missing critical check, from Eric Dumazet. 5) EEH support in mlx4 driver, from Kleber Sacilotto de Souza. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits) ipv6: Early TCP socket demux ipv4: Fix input route performance regression. pch_gbe: vlan skb len fix pch_gbe: add extra clean tx pch_gbe: fix transmit watchdog timeout ixgbe: fix panic while dumping packets on Tx hang with IOMMU be2net: Fix to parse RSS hash from Receive completions correctly. net/mlx4_en: Limit the RFS filter IDs to be < RPS_NO_FILTER hyperv: Add error handling to rndis_filter_device_add() hyperv: Add a check for ring_size value ipv4: rt_cache_valid must check expired routes net/pch_gpe: Cannot disable ethernet autonegation qeth: repair crash in qeth_l3_vlan_rx_kill_vid() netiucv: cleanup attribute usage net: wiznet add missing HAS_IOMEM dependency be2net: Missing byteswap in be_get_fw_log_level causes oops on PowerPC mlx4: Add support for EEH error recovery cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWAN wanmain: comparing array with NULL caif: fix NULL pointer check ...
2012-07-25qeth: repair crash in qeth_l3_vlan_rx_kill_vid()frank.blaschka@de.ibm.com
Commit efc73f4b "net: Fix memory leak - vlan_info struct" adds deletion of VLAN 0 for devices with feature NETIF_F_HW_VLAN_FILTER. For driver qeth these are the layer 3 devices. Usually there exists no separate vlan net_device for VLAN 0. Thus the qeth functions qeth_l3_free_vlan_addresses4() and qeth_l3_free_vlan_addresses6() require an extra checking if function __vlan_find_dev_deep() returns with a net_device. Cc: stable@vger.kernel.org Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-25netiucv: cleanup attribute usagefrank.blaschka@de.ibm.com
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Acked-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-24Merge tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Avi Kivity: "Highlights include - full big real mode emulation on pre-Westmere Intel hosts (can be disabled with emulate_invalid_guest_state=0) - relatively small ppc and s390 updates - PCID/INVPCID support in guests - EOI avoidance; 3.6 guests should perform better on 3.6 hosts on interrupt intensive workloads) - Lockless write faults during live migration - EPT accessed/dirty bits support for new Intel processors" Fix up conflicts in: - Documentation/virtual/kvm/api.txt: Stupid subchapter numbering, added next to each other. - arch/powerpc/kvm/booke_interrupts.S: PPC asm changes clashing with the KVM fixes - arch/s390/include/asm/sigp.h, arch/s390/kvm/sigp.c: Duplicated commits through the kvm tree and the s390 tree, with subsequent edits in the KVM tree. * tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits) KVM: fix race with level interrupts x86, hyper: fix build with !CONFIG_KVM_GUEST Revert "apic: fix kvm build on UP without IOAPIC" KVM guest: switch to apic_set_eoi_write, apic_write apic: add apic_set_eoi_write for PV use KVM: VMX: Implement PCID/INVPCID for guests with EPT KVM: Add x86_hyper_kvm to complete detect_hypervisor_platform check KVM: PPC: Critical interrupt emulation support KVM: PPC: e500mc: Fix tlbilx emulation for 64-bit guests KVM: PPC64: booke: Set interrupt computation mode for 64-bit host KVM: PPC: bookehv: Add ESR flag to Data Storage Interrupt KVM: PPC: bookehv64: Add support for std/ld emulation. booke: Added crit/mc exception handler for e500v2 booke/bookehv: Add host crit-watchdog exception support KVM: MMU: document mmu-lock and fast page fault KVM: MMU: fix kvm_mmu_pagetable_walk tracepoint KVM: MMU: trace fast page fault KVM: MMU: fast path of handling guest page fault KVM: MMU: introduce SPTE_MMU_WRITEABLE bit KVM: MMU: fold tlb flush judgement into mmu_spte_update ...
2012-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David S Miller: 1) Remove the ipv4 routing cache. Now lookups go directly into the FIB trie and use prebuilt routes cached there. No more garbage collection, no more rDOS attacks on the routing cache. Instead we now get predictable and consistent performance, no matter what the pattern of traffic we service. This has been almost 2 years in the making. Special thanks to Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who have helped along the way. I'm sure that with a change of this magnitude there will be some kind of fallout, but such things ought the be simple to fix at this point. Luckily I'm not European so I'll be around all of August to fix things :-) The major stages of this work here are each fronted by a forced merge commit whose commit message contains a top-level description of the motivations and implementation issues. 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on input. 3) TCP SYN/ACK performance tweaks from Eric Dumazet. 4) Add namespace support for netfilter L4 conntrack helpers, from Gao Feng. 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from Yuval Mintz. 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet. 7) Support for connection tracker helpers in userspace, from Pablo Neira Ayuso. 8) Allow userspace driven TX load balancing functions in TEAM driver, from Jiri Pirko. 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with embedded gotos. 10) TCP Small Queues, essentially minimize the amount of TCP data queued up in the packet scheduler layer. Whereas the existing BQL (Byte Queue Limits) limits the pkt_sched --> netdevice queuing levels, this controls the TCP --> pkt_sched queueing levels. From Eric Dumazet. 11) Reduce the number of get_page/put_page ops done on SKB fragments, from Alexander Duyck. 12) Implement protection against blind resets in TCP (RFC 5961), from Eric Dumazet. 13) Support the client side of TCP Fast Open, basically the ability to send data in the SYN exchange, from Yuchung Cheng. Basically, the sender queues up data with a sendmsg() call using MSG_FASTOPEN, then they do the connect() which emits the queued up fastopen data. 14) Avoid all the problems we get into in TCP when timers or PMTU events hit a locked socket. The TCP Small Queues changes added a tcp_release_cb() that allows us to queue work up to the release_sock() caller, and that's what we use here too. From Eric Dumazet. 15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits) genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP r8169: revert "add byte queue limit support". ipv4: Change rt->rt_iif encoding. net: Make skb->skb_iif always track skb->dev ipv4: Prepare for change of rt->rt_iif encoding. ipv4: Remove all RTCF_DIRECTSRC handliing. ipv4: Really ignore ICMP address requests/replies. decnet: Don't set RTCF_DIRECTSRC. net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse. ipv4: Remove redundant assignment rds: set correct msg_namelen openvswitch: potential NULL deref in sample() tcp: dont drop MTU reduction indications bnx2x: Add new 57840 device IDs tcp: avoid oops in tcp_metrics and reset tcpm_stamp niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value niu: Fix to check for dma mapping errors. net: Fix references to out-of-scope variables in put_cmsg_compat() net: ethernet: davinci_emac: add pm_runtime support net: ethernet: davinci_emac: Remove unnecessary #include ...
2012-07-20s390/comments: unify copyright messages and remove file namesHeiko Carstens
Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-17s390: Use eth_random_addrJoe Perches
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16s390/ap: resend enable adapter interrupt request.Holger Dengler
The adapter interrupt for an APQN must be re-enabled after a reset. This patch sends the interrupt enablement request again, if the APQN is busy or the reset is still in progress. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-16s390/dasd: add shutdown actionStefan Haberland
Add a mechanism to wait for outstanding IO during shutdown. Schedule the block_bh and device_bh and wait until our request queues are empty. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-05qeth: Convert over to dst_neigh_lookup_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13KVM: s390: Perform early event mask processing during bootHeinz Graalfs
For processing under KVM it is required to detect the actual SCLP console type in order to set it as preferred console. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-06-05s390/vmlogrdr: cleanup driver attribute usageSebastian Ott
Let the driver core handle driver attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05s390/vmlogrdr: cleanup device attribute usageSebastian Ott
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05s390/cio/chp: cleanup attribute usageSebastian Ott
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Heiko Carstens: "A couple of s390 patches for the 3.5 merge window. Just a collection of bug fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uaccess: fix access_ok compile warnings s390/cmpxchg: select HAVE_CMPXCHG_LOCAL option s390/cmpxchg: fix sign extension bugs s390/cmpxchg: fix 1 and 2 byte memory accesses s390/cmpxchg: fix compile warnings specific to s390 s390/cmpxchg: add missing memory barrier to cmpxchg64 s390/cpu: remove cpu "capabilities" sysfs attribute s390/kernel: Fix smp_call_ipl_cpu() for offline CPUs s390/kernel: Introduce memcpy_absolute() function s390/headers: replace __s390x__ with CONFIG_64BIT where possible s390/headers: remove #ifdef __KERNEL__ from not exported headers s390/irq: split irq stats for cpu-measurement alert facilities s390/kexec: Move early_pgm_check_handler() to text section s390/kdump: Use real mode for PSW restart and kexec s390/kdump: Account /sys/kernel/kexec_crash_size changes in OS info s390/kernel: Remove OS info init function call and diag 308 for kdump
2012-05-24Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM changes from Avi Kivity: "Changes include additional instruction emulation, page-crossing MMIO, faster dirty logging, preventing the watchdog from killing a stopped guest, module autoload, a new MSI ABI, and some minor optimizations and fixes. Outside x86 we have a small s390 and a very large ppc update. Regarding the new (for kvm) rebaseless workflow, some of the patches that were merged before we switch trees had to be rebased, while others are true pulls. In either case the signoffs should be correct now." Fix up trivial conflicts in Documentation/feature-removal-schedule.txt arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h. I suspect the kvm_para.h resolution ends up doing the "do I have cpuid" check effectively twice (it was done differently in two different commits), but better safe than sorry ;) * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits) KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block KVM: s390: onereg for timer related registers KVM: s390: epoch difference and TOD programmable field KVM: s390: KVM_GET/SET_ONEREG for s390 KVM: s390: add capability indicating COW support KVM: Fix mmu_reload() clash with nested vmx event injection KVM: MMU: Don't use RCU for lockless shadow walking KVM: VMX: Optimize %ds, %es reload KVM: VMX: Fix %ds/%es clobber KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte() KVM: VMX: unlike vmcs on fail path KVM: PPC: Emulator: clean up SPR reads and writes KVM: PPC: Emulator: clean up instruction parsing kvm/powerpc: Add new ioctl to retreive server MMU infos kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler KVM: PPC: Book3S: Enable IRQs during exit handling KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Fix stbux emulation KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields ...
2012-05-24s390/headers: replace __s390x__ with CONFIG_64BIT where possibleHeiko Carstens
Replace __s390x__ with CONFIG_64BIT in all places that are not exported to userspace or guarded with #ifdef __KERNEL__. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-24s390/headers: remove #ifdef __KERNEL__ from not exported headersHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-22Merge tag 'tty-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY updates from Greg Kroah-Hartman: "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge window. Nothing major in here, just lots of incremental changes from Alan and Jiri reworking some tty core things to behave better and to get a more solid grasp on some of the nasty tty locking issues. There are a few tty and serial driver updates in here as well. All of this has been in the linux-next releases for a while with no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits) serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller. serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width. serial: bfin_uart: narrow the reboot condition in DMA tx interrupt serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller. Revert "serial_core: Update buffer overrun statistics." tty: hvc_xen: NULL dereference on allocation failure tty: Fix LED error return tty: Allow uart_register/unregister/register tty: move global ldisc idle waitqueue to the individual ldisc serial8250-em: Add DT support serial8250-em: clk_get() IS_ERR() error handling fix serial_core: Update buffer overrun statistics. tty: drop the pty lock during hangup cris: fix missing tty arg in wait_event_interruptible_tty call tty/amiserial: Add missing argument for tty_unlock() tty_lock: Localise the lock pty: Lock the devpts bits privately tty_lock: undo the old tty_lock use on the ctty serial8250-em: Emma Mobile UART driver V2 Add missing call to uart_update_timeout() ...
2012-05-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "Just a random collection of bug-fixes and cleanups, nothing new in this merge request." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) s390/ap: Fix wrong or missing comments s390/ap: move receive callback to message struct s390/dasd: re-prioritize partition detection message s390/qeth: reshuffle initialization s390/qeth: cleanup drv attr usage s390/claw: cleanup drv attr usage s390/lcs: cleanup drv attr usage s390/ctc: cleanup drv attr usage s390/ccwgroup: remove ccwgroup_create_from_string s390/qeth: stop using struct ccwgroup driver for discipline callbacks s390/qeth: switch to ccwgroup_create_dev s390/claw: switch to ccwgroup_create_dev s390/lcs: switch to ccwgroup_create_dev s390/ctcm: switch to ccwgroup_create_dev s390/ccwgroup: exploit ccwdev_by_dev_id s390/ccwgroup: introduce ccwgroup_create_dev s390: fix race on TIF_MCCK_PENDING s390/barrier: make use of fast-bcr facility s390/barrier: cleanup barrier functions s390/claw: remove "eieio" calls ...
2012-05-18KVM: s390: add capability indicating COW supportChristian Borntraeger
Currently qemu/kvm on s390 uses a guest mapping that does not allow the guest backing page table to be write-protected to support older systems. On those older systems a host write protection fault will be delivered to the guest. Newer systems allow to write-protect the guest backing memory and let the fault be delivered to the host, thus allowing COW. Use a capability bit to tell qemu if that is possible. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-16qeth: recognize vlan devices in layer3 modefrank.blaschka@de.ibm.com
The qeth layer3 driver is notified about IP address changes. Changes concerning qeth driven network interfaces have to be forwarded to the OSA-card. This includes IP addresses of VLAN interfaces with a qeth device as base device. Function qeth_l3_verify_vlan_dev() determines if the net_device of the IP event belongs to a vlan device belonging to a qeth device as real device. This function is broken starting with commit 7ff0bcf676f7ed224ce21b58c7858c8e527068b2 , which means IP addresses of VLAN devices are no longer set at the base qeth device. The patch repairs function qeth_l3_verify_vlan_dev(). Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16qeth: remove token ring part 2Frank Blaschka
Commit 1abd2296b4a1ee7b6a883541c3ede52042a09521 starts removing token ring from qeth_l3. This patch removes the rest of token ring related code from the driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16s390/ap: Fix wrong or missing commentsHolger Dengler
Fix wrong or missing comments of ap inline assemblies. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/ap: move receive callback to message structHolger Dengler
Move the receive callback from zdev_driver to ap_message structure to get a more flexible asynchronous ap message handling. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/qeth: reshuffle initializationSebastian Ott
Reshuffle the init function of the qeth driver to ensure that the driver is usable at the time it is registered. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/qeth: cleanup drv attr usageSebastian Ott
Cleanup attributes of the qeth ccwgroup driver. Ensure availability of driver attributes by the time the driver is registered. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/claw: cleanup drv attr usageSebastian Ott
Rename attributes of the claw_group_driver. Also get rid of the call to driver_remove_file. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/lcs: cleanup drv attr usageSebastian Ott
Rename attributes of the lcs_group_driver. Also get rid of the call to driver_remove_file. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/ctc: cleanup drv attr usageSebastian Ott
Rename attributes of the ctcm_group_driver. Also get rid of the call to driver_remove_file. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/ccwgroup: remove ccwgroup_create_from_stringSebastian Ott
Remove the old ccwgroup_create_from_string interface since all drivers have been converted to ccwgroup_create_dev. Also remove now unused members of ccwgroup_driver. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/qeth: stop using struct ccwgroup driver for discipline callbacksSebastian Ott
The interface between qeth and its disciplines should not depend on struct ccwgroup_driver, as a qeth discipline is not a ccwgroup driver on its own. Instead provide the particular callbacks in struct qeth_discipline. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/qeth: switch to ccwgroup_create_devSebastian Ott
Switch to the new ccwgroup_create_dev interface. Also wrap device attributes in a struct device_type and let the driver core create these attributes automagically. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/claw: switch to ccwgroup_create_devSebastian Ott
Switch to the new ccwgroup_create_dev interface. Also wrap device attributes in a struct device_type and let the driver core create these attributes automagically. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/lcs: switch to ccwgroup_create_devSebastian Ott
Switch to the new ccwgroup_create_dev interface. Also wrap device attributes in a struct device_type and let the driver core create these attributes automagically. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/ctcm: switch to ccwgroup_create_devSebastian Ott
Switch to the new ccwgroup_create_dev interface. Also wrap device attributes in a struct device_type and let the driver core create these attributes automagically. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/ccwgroup: exploit ccwdev_by_dev_idSebastian Ott
Instead of finding devices via driver_find_device use the bus_find_device wrapper get_ccwdev_by_dev_id. This allows us to get rid of the ccw_driver argument of ccwgroup_create_dev and thus simplify the interface. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/ccwgroup: introduce ccwgroup_create_devSebastian Ott
Add a new interface for drivers to create a group device. Via the old interface ccwgroup_create_from_string we would create a virtual device in a way that only the caller of this function would match and bind to. Via the new ccwgroup_create_dev we stop playing games with the driver core and directly set the driver of the new group device. For drivers which have todo additional setup steps (like setting driver_data) provide a new setup driver callback. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/claw: remove "eieio" callsHeiko Carstens
If the code really depends on ordering it's already racy. The additional memory barriers (eieio) don't help with that. If the code is not racy the memory barriers also aren't needed. In any case, just remove them. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/memory hotplug: initialize storage keysHeiko Carstens
Add missing storage key initialization when memory comes online. Didn't hurt until now, since the kernel always uses access key 0. However for debugging purposes we sometimes use a different key and it might be good if everything is properly initialized... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/time: always use stckf instead of stck if availableHeiko Carstens
The store clock fast instruction saves a couple of instructions compared to the store clock instruction. Always use stckf instead of stck if it is available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/tape: remove tape block leftoversHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390: remove superfluous tpi from wait_cons_devMartin Schwidefsky
wait_cons_dev waits for a particular subchannel to complete an I/O. It is not necessary to use tpi to get the subchannel id as it is already known. This avoids changes to the interrupt subclass mask and allows to remove the lock & unlock of the subchannel lock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390/qdio: Cleanup error handling to driversJan Glauber
Various improvements of qdio error reporting to the upper-layer drivers (qeth, zfcp): - Split QDIO_ERROR_ACTIVATE_CHECK_CONDITION into: QDIO_ERROR_ACTIVATE: qdio termination interrupt QDIO_ERROR_GET_BUF_STATE: QIOASSIST eqbs error QDIO_ERROR_SET_BUF_STATE: QIOASSIST sqbs error Add QDIO_ERROR_FATAL / QDIO_ERROR_TEMPORARY masks to ease recovery decision in upper-layer drivers. - Don't (ab-)use qdio handler errors as return codes for do_QDIO but use standard error codes: -ENOBUFS: temporary target CC=2 condition -EBUSY: unresolved SIGA-W CC=2 busy condition -EIO: I/O error (CC=1, CC=3) - Remove unneeded memory clobber from SIGA-R - Remove EX_TABLE entry on SIGA-W, we want to see these errors Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-16s390: delete any traces of token ring supportPaul Gortmaker
The token ring support is going away from the core kernel. Divorce the S390 drivers from it in advance. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-24qeth: Use blkt defaults for OSA Express 4Stefan Raspl
The previous blkt defaults for OSA Express 4 cards produced inadequate performance for streaming workloads. The present patch will apply a set of more appropriate defaults. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-24qeth: allow change of blkt default valuesUrsula Braun
There exist qeth sysfs blkt attributes to change the default blkt values. But blkt changes are reset during online setting due to a 2nd invocation of qeth_determine_capabilites(). This patch makes sure blkt default values are configured during 1st run of qeth_determine_capabilities() only. Thus blkt changes are kept during online setting. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Reported-by: Horst Hartmann <horst.hartmann@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23Merge 3.4-rc4 into tty-nextGreg Kroah-Hartman
This resolves the merge problem with: drivers/tty/serial/pch_uart.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>