summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2012-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking updates from David Miller: 1) tx_filtered/ps_tx_buf queues need to be accessed with the SKB queue lock, from Arik Nemtsov. 2) Don't call 802.11 driver's filter configure method until it's actually open, from Felix Fietkau. 3) Use ieee80211_free_txskb otherwise we leak control information. From Johannes Berg. 4) Fix memory leak in bluetooth UUID removal,f rom Johan Hedberg. 5) The shift mask trick doesn't work properly when 'optname' is out of range in do_ip_setsockopt(). Use a straightforward switch statement instead, the compiler emits essentially the same code but without the missing range check. From Xi Wang. 6) Fix when we call tcp_replace_ts_recent() otherwise we can erroneously accept a too-high tsval. From Eric Dumazet. 7) VXLAN bug fixes, mostly to do with VLAN header length handling, from Alexander Duyck. 8) Missing return value initialization for IPV6_MINHOPCOUNT socket option handling. From Hannes Frederic. 9) Fix regression in tasklet handling in jme/ksz884x/xilinx drivers, from Xiaotian Feng. 10) At smsc911x driver init time, we don't know if the chip is in word swap mode or not. However we do need to wait for the control register's ready bit to be set before we program any other part of the chip. Adjust the wait loop to account for this. From Kamlakant Patel. 11) Revert erroneous MDIO bus unregister change to mdio-bitbang.c 12) Fix memory leak in /proc/net/sctp/, from Tommi Rantala. 13) tilegx driver registers IRQ with NULL name, oops, from Simon Marchi. 14) TCP metrics hash table kzalloc() based allocation can fail, back down to using vmalloc() if it does. From Eric Dumazet. 15) Fix packet steering out-of-order delivery regression, from Tom Herbert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) net-rps: Fix brokeness causing OOO packets tcp: handle tcp_net_metrics_init() order-5 memory allocation failures batman-adv: process broadcast packets in BLA earlier batman-adv: don't add TEMP clients belonging to other backbone nodes batman-adv: correctly pass the client flag on tt_response batman-adv: fix tt_global_entries flags update tilegx: request_irq with a non-null device name net: correct check in dev_addr_del() tcp: fix retransmission in repair mode sctp: fix /proc/net/sctp/ memory leak Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free" net/smsc911x: Fix ready check in cases where WORD_SWAP is needed drivers/net: fix tasklet misuse issue ipv4/ip_vti.c: VTI fix post-decryption forwarding brcmfmac: fix typo in CONFIG_BRCMISCAN vxlan: Update hard_header_len based on lowerdev when instantiating VXLAN vxlan: fix a typo. ipv6: setsockopt(IPIPPROTO_IPV6, IPV6_MINHOPCOUNT) forgot to set return value doc/net: Fix typo in netdev-features.txt vxlan: Fix error that was resulting in VXLAN MTU size being 10 bytes too large ...
2012-11-15s390/3215: fix tty close handlingHeiko Carstens
The 3215 console always has the RAW3215_FIXED flag set, which causes raw3215_shutdown() not to wait for outstanding I/O requests if an attached tty gets closed. The flag however can be simply removed, so we can guarantee that all requests belonging to the tty have been processed when the tty is closed. However the tasklet that belongs to the 3215 device may be scheduled even if there is no tty attached anymore, since we have a race between console and tty processing. Thefore unconditional tty_wakekup() in raw3215_wakeup() can cause the following NULL pointer dereference: 3.465368 Unable to handle kernel pointer dereference at virtual kernel address (null) 3.465448 Oops: 0004 #1 SMP 3.465454 Modules linked in: 3.465459 CPU: 1 Not tainted 3.6.0 #1 3.465462 Process swapper/1 (pid: 0, task: 000000003ffa4428, ksp: 000000003ffb7ce0) 3.465466 Krnl PSW : 0404100180000000 0000000000162f86 (__wake_up+0x46/0xb8) 3.465480 R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3 Krnl GPRS: fffffffffffffffe 0000000000000000 0000000000000160 0000000000000001 3.465492 0000000000000001 0000000000000004 0000000000000004 000000000096b490 3.465499 0000000000000001 0000000000000100 0000000000000001 0000000000000001 3.465506 070000003fc87d60 0000000000000160 000000003fc87d68 000000003fc87d00 3.465526 Krnl Code: 0000000000162f76: e3c0f0a80004 lg %r12,168(%r15) 0000000000162f7c: 58000370 l %r0,880 #0000000000162f80: c007ffffffff00 xilf %r0,4294967295 >0000000000162f86: ba102000 cs %r1,%r0,0(%r2) 0000000000162f8a: 1211 ltr %r1,%r1 0000000000162f8c: a774002f brc 7,162fea 0000000000162f90: b904002d lgr %r2,%r13 0000000000162f94: b904003a lgr %r3,%r10 3.465597 Call Trace: 3.465599 (<0400000000000000> 0x400000000000000) 3.465602 <000000000048c77e> raw3215_wakeup+0x2e/0x40 3.465607 <0000000000134d66> tasklet_action+0x96/0x168 3.465612 <000000000013423c> __do_softirq+0xd8/0x21c 3.465615 <0000000000134678> irq_exit+0xa8/0xac 3.465617 <000000000046c232> do_IRQ+0x182/0x248 3.465621 <00000000005c8296> io_return+0x0/0x8 3.465625 <00000000005c7cac> vtime_stop_cpu+0x4c/0xb8 3.465629 (<0000000000194e06> tick_nohz_idle_enter+0x4e/0x74) 3.465633 <0000000000104760> cpu_idle+0x170/0x184 3.465636 <00000000005b5182> smp_start_secondary+0xd6/0xe0 3.465641 <00000000005c86be> restart_int_handler+0x56/0x6c 3.465643 <0000000000000000> 0x0 3.465645 Last Breaking-Event-Address: 3.465647 <0000000000403136> tty_wakeup+0x46/0x98 3.465652 3.465654 Kernel panic - not syncing: Fatal exception in interrupt 01: HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 0010F63C The easiest solution is simply to check if tty is NULL in the tasklet. If it is NULL nothing is to do (no tty attached), otherwise tty_wakeup() can be called, since we hold a reference to the tty. This is not nice... but it is a small patch and it works. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-13qeth: set new mac even if old mac is goneUrsula Braun
If the set_mac_address() function of qeth is invoked, qeth deletes the old mac address first on OSA. Only if deletion returns successfully the new mac address is set on OSA. Deletion may return with a return value "MAC not found on OSA". In this case qeth should continue setting the new mac address. When the OSA cable is pulled, OSA forgets any set mac address. If the OSA network interface acts as a slave to a bonding master interface, bonding can invoke the set_mac_address function for failover purposes and depends on successful setting of the new mac address even though the old mac address could no longer be deleted. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13qeth: Fix IPA_CMD_QIPASSIST return code handlingStefan Raspl
Return codes of IPA_CMD_QIPASSIST are not checked, especially the ones which indicate that the command is not supported. As a result, the device driver would not enable all available features on older card generations. This patch adds proper checking and sets the bare minimum in the supported functions flags to avoid follow-on errors. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06s390/cio: fix length calculation in idset.cSebastian Ott
bitmap_or uses the number of bits as its length parameter and not the number of words necessary to store those bits. This fixes a regression introduced by: aa92b33 s390/cio: use generic bitmap functions Reported-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-06s390: Move css limits from drivers/s390/cio/ to include/asm/.Cornelia Huck
There's no need to keep __MAX_SUBCHANNEL and __MAX_SSID private to the common I/O layer when __MAX_CSSID is usable by everybody. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-26s390/cio: suppress 2nd path verification during resumeSebastian Ott
Do not trigger a path verification in the subchannel event function during resume from hibernate. This will be started by the pm_restore callback later. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-18s390/css: stop stsch loop after cc 3Sebastian Ott
Receiving cc=3 from store subchannel means 2 things: * the subchannel is not provided * there are no further subchannels in this subchannel set With this patch we abort the store subchannel loop after cc=3 (or an exception) and clear the subsequent bits in the subchannel id set. Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-18s390/cio: use generic bitmap functionsSebastian Ott
Use generic bitmap functions in the subchannel id bitmap to simplify and de-bloat the code. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-16qeth: fix deadlock between recovery and bonding driverStefan Raspl
The recovery thread, when failing, tears down the respective interface. To do so, it needs to obtain the rtnl lock first, as the interface configuration is changed. If another process tries to modify an interface setting at the same time, that process can obtain the rtnl lock first, but the respective callback in the qeth driver will block until recovery has completed - which cannot happen since the calling process already obtained it. In one particular case, the bonding driver acquired the rtnl lock to modify the card's MAC address, while the recovery failed at the same time due to the card being removed. Hence qeth_l2_set_mac_address (implicitly holding the rtnl lock) was waiting on qeth_l2_recover, which deadlocked when waiting on the rtnl lock. This patch uses rtnl_trylock instead of rtnl_lock in the recovery thread. If the lock cannot be obtained, the interface will be left up, but the card state remains in CARD_STATE_RECOVER, which will prevent any further activities on the card. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16smsgiucv: reestablish IUCV path after resumeHendrik Brueckner
smsg_pm_restore_thaw() uses wrong checking before reconnecting the IUCV path to *MSG. It is corrected with this patch. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-09s390/zcrypt: remove duplicated include from zcrypt_pcixcc.cWei Yongjun
Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-10-09s390/dcssblk: cleanup device attribute usageSebastian Ott
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-07Merge branch 'virtio-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio changes from Rusty Russell: "New workflow: same git trees pulled by linux-next get sent straight to Linus. Git is awkward at shuffling patches compared with quilt or mq, but that doesn't happen often once things get into my -next branch." * 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits) lguest: fix occasional crash in example launcher. virtio-blk: Disable callback in virtblk_done() virtio_mmio: Don't attempt to create empty virtqueues virtio_mmio: fix off by one error allocating queue drivers/virtio/virtio_pci.c: fix error return code virtio: don't crash when device is buggy virtio: remove CONFIG_VIRTIO_RING virtio: add help to CONFIG_VIRTIO option. virtio: support reserved vqs virtio: introduce an API to set affinity for a virtqueue virtio-ring: move queue_index to vring_virtqueue virtio_balloon: not EXPERIMENTAL any more. virtio-balloon: dependency fix virtio-blk: fix NULL checking in virtblk_alloc_req() virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path virtio-blk: Add bio-based IO path for virtio-blk virtio: console: fix error handling in init() function tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace tools: Add guest trace agent as a user tool virtio/console: Allocate scatterlist according to the current pipe size ...
2012-10-03Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley <JBottomley@Parallels.com>" Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...
2012-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
2012-10-02Merge SCSI misc branch into isci-for-3.6 tagJames Bottomley
2012-10-01Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
2012-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-28virtio: support reserved vqsMichael S. Tsirkin
virtio network device multiqueue support reserves vq 3 for future use (useful both for future extensions and to make it pretty - this way receive vqs have even and transmit - odd numbers). Make it possible to skip initialization for specific vq numbers by specifying NULL for name. Document this usage as well as (existing) NULL callback. Drivers using this not coded up yet, so I simply tested with virtio-pci and verified that this patch does not break existing drivers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio-ring: move queue_index to vring_virtqueueJason Wang
Instead of storing the queue index in transport-specific virtio structs, this patch moves them to vring_virtqueue and introduces an helper to get the value. This lets drivers simplify their management and tracing of virtqueues. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-26s390/dasd: check count address during online settingStefan Haberland
A common way to prepare a z/VM mini disk is to format the real device with a z/VM tool like CPFMTXA and then define a mini disk that excludes the first cylinder, i.e. the cylinder 0 of the virtual disk is located at cylinder 1 of the real device. The DASD device driver will recognize such a mini disk as formatted, as the uniform record layout on the disk matches that of an LDL formatted device. However, the cylinder value in the 'count' field of the ECKD records matches the geometry of the real device, and not that of the mini disk, so I/O requests will fail with 'record not found' errors. To make the mini disk usable, it needs to be formatted with a tool like dasdfmt. To enable tools like distribution installation tools to recognize this situation, the DASD device driver should report such a mini disk as 'not formatted'. To this end we need to extend the device recognition code to check not just for proper record sizes, but also for proper cylinder/head/record values. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Reviewed-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26drivers/s390/char/monreader.c: fix error return codePeter Senna Tschudin
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add uninitialized_var() to suppress false positive compiler warningsHeiko Carstens
Get rid of these: arch/s390/kernel/smp.c:134:19: warning: ‘status’ may be used uninitialized in this function [-Wuninitialized] arch/s390/mm/pgtable.c:641:10: warning: ‘table’ may be used uninitialized in this function [-Wuninitialized] arch/s390/mm/pgtable.c:644:12: warning: ‘page’ may be used uninitialized in this function [-Wuninitialized] drivers/s390/cio/cio.c:1037:14: warning: ‘schid’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/tape: remove even more tape block leftoversHeiko Carstens
Fix this compile error: In file included from drivers/s390/char/tape_core.c:29:0: drivers/s390/char/tape_std.h:103:66: warning: ‘struct request’ declared inside parameter list [enabled by default] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/ap_bus: add missing ifdefHeiko Carstens
Get rid of this compile warning for CONFIG_32BIT: drivers/s390/crypto/ap_bus.c:168:12: warning: ‘ap_configuration_available’ defined but not used [-Wunused-function] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/qdio: fix truncated debug output of hex valuesJan Glauber
Calling debug_event the s390 debug feature only logs up to buf_size bytes of the debug view. If debug_event is called with more bytes than buf_size the additional data is ignored and not logged in the debug view. Use multiple calls to debug_event if the length exceeds buf_size. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/zcryt: Handle AP configuration changesHolger Dengler
Detect external AP bus configuration changes and request an AP device rescan. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/vmlogrdr: change return value from -ENOSYS to -EOPNOTSUPPHeiko Carstens
Changing the return value of vmlogrdr_open() to -EOPNOTSUPP if O_NONBLOCK is specified shouldn't have any negative side effects. Any existing user wouldn't specify that flag since it wouldn't work anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/etr,stp: use -EOPNOTSUPP instead of -ENOSYSHeiko Carstens
Change -ENOSYS to -EOPNOTSUPP. Return value is used only internally. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/sclp: use -EOPNOTSUPP instead of -ENOSYSHeiko Carstens
The return value was only internally used, so it's ok to change. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/dasd: fix return value for non-existent ioctlsHeiko Carstens
For non-existent ioctls -ENOTTY should be returned. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/sysinfo,stsi: change return code handlingHeiko Carstens
Change return code handling of the stsi() function: In case function code 0 was specified the return value is the current configuration level (already shifted). That way all the code that actually copied the stsi_0() function can go away. Otherwise the return value is 0 (success) or negative to indicate an error (currently only -EOPNOTSUPP). Also stsi() is no longer an inline function. The function is not performance critical, but every caller would generate an exception table entry for this function. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/3270: drop unused spinlock from struct con3270Jean Delvare
I was checking why this spinlock was never initialized, but it turns out it's not used anywhere, so we can drop it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm: reorder scm_removeSebastian Ott
Do not reset drvdata before the block device is cleaned up. With a non-empty block queue drvdata could be accessed. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm: remove superfluous lockSebastian Ott
Remove the spinlock from struct scm_device. drvdata and attributes are guarded via device_lock. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/scm_block: force cluster writesSebastian Ott
Force writes to Storage Class Memory (SCM) to be in done in clusters. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add scm block driverSebastian Ott
Block device driver for Storage Class Memory (SCM). This driver provides a block device interface for each available SCM increment. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/eadm_sch: add support for irq statisticsSebastian Ott
Add support for EADM interrupt statistics in /proc/interrupts. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/cio: add eadm subchannel driverSebastian Ott
This driver allows usage of EADM subchannels. EADM subchannels act as a communication vehicle for SCM increments. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add scm notificationSebastian Ott
Detect an scm change notification in store event information. Update affected scm devices and notify their drivers. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add scm bus driverSebastian Ott
Bus driver to manage Storage Class Memory. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/chsc: implement store SCM informationSebastian Ott
chsc_scm_info will be used to detect all available increments of storage class memory. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add eadm related structuresSebastian Ott
Add structures to be used by the eadm subchannel driver. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390: add eadm facility bitsSebastian Ott
Add the eadm facility bits to the css characteristics and move them to a new header. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/css: export css_sched_sch_todoSebastian Ott
Allow subchannel drivers build as a module to schedule subchannel work. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/zcrypt: Add support for CEX4 crypto cardHolger Dengler
New zcrypt module supports IBM CryptoExpress 4 cards. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/zcrypt: Separate msgtype implementation from card modules.Holger Dengler
Msgtype implementations are now separated from card specific modules and can be dynamically registered. Existing msgtype implementations are restructured in modules. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/ap: Add functiton facility information as AP device attribute.Holger Dengler
Add the function facility information as new ap_device and sysfs attribute. Also make the number of requests in device queue and in device driver queue accessible in sysfs. Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-26s390/ap: configuration information exploitationHolger Dengler
Query AP configuration information. Improve performance of AP bus scans by skipping AP device probing, if the AP deviec is not configured. Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>