summaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid/aachba.c
AgeCommit message (Collapse)Author
2007-04-17[SCSI] aacraid: fix aacraid not finding deviceSalyzyn, Mark
Thanks for the help from Steve Fox and Duane Cox investigating this issue, I'd like to report that we found the problem. The issue is with the patch Steve Fox isolated below, by not accommodating older adapters properly and issuing a command they do not support when retrieving storage parameters about the arrays. This simple patch resolves the problem (and more accurately mimics the logic of the original code before the patch). Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01[SCSI] aacraid: fix print of Firmware Build Date and add TSIDSalyzyn, Mark
The Adapter build date that is to be printed on instantiation was not displayed as a result of the supplemental adapter information structure not being in sync with the Firmware; the driver took an early test cycle version that had a miss-sized padded region at the head and the structure was not re-checked at the end of qualification. The Build Date was not a priority and is merely a cosmetic enhancement, and the wrong location for the start of the structure member would not induce any side-effect problems. We updated the structure to match the actual format, and added the TSID (Tech Support Identification) value print, should it be present, to the adapter instantiation announcements during driver load. This later enhancement should improve the relationship between Service folk & Tech Support if the printed value of the TSID found it's way into the circular file labeled G... Neither of these values show in sysfs (yet). Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-21[SCSI] aacraid: cleanup and version stamp driverSalyzyn, Mark
There is some residual cleanup of the last series of patches and the need to bump the revision number to draw the line in the sand. The cmd->SCp.phase is set in the aac_valid_context routine, then set again to the same value following it's return. The cmd->scsi_done is set twice in the aac_queuecommand routine. Free up the scsidev FILO in aac_probe_container as it is not needed further down the function in any case. Improve the efficiency of the abort handler kernel print parameters. Bump revision number of driver to approximate the equivalent in the Adaptec supplied version. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-21[SCSI] aacraid: check buffer address in aac_internal_transferSalyzyn, Mark
Captured a panic on an older kernel where an application issuing commands via sg was sending requests that lacked a request_buffer, thus the buffer pointer used in aac_internal_transer was NULL. The application was fixed closing the issue, but felt it was advised to immunize the driver against the eventuality. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] aacraid: Improved error handlingMark Haverkamp
Received from Mark Salyzyn, This set of fixes improve error handling stability of the driver. A popular manifestation of the problems is an NULL pointer reference in the interrupt handler when referencing portions of the scsi command context, or in the scsi_done handling when an offlined device is referenced. The aacraid driver currently does not get notification of orphaned command completions due to devices going offline. The driver also fails to handle the commands that are finished by the error handler, and thus can complete again later at the hands of the adapter causing situations of completion of an invalid scsi command context. Test Unit Ready calls abort assuming that the abort was successful, but are not, and thus when the interrupt from the adapter occurs, they reference invalid command contexts. We add in a TIMED_OUT flag to inform the aacraid FIB context that the interrupt service should merely release the driver resources and not complete the command up. We take advantage of this with the abort handler as well for select abortable commands. And we detect and react if a command that can not be aborted is currently still outstanding to the controller when reissued by the retry mechanism. Signed-off-by: Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] aacraid: remove un-needed references to container id (cid)Mark Haverkamp
Received from Mark Salyzyn, This little patch removes the ',cid)' container identification argument from some of the functions. The argument is used in some cases as merely a debug helper and thus not used, and in others, the value can be quickly acquired from the scsi command in their single solitary use in the procedure rather than wasting resources on passing the argument in from above. Signed-off-by: Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-20[SCSI] aacraid: Fix blocking issue with container probing function (cast update)Mark Haverkamp
Received from Mark Salyzyn, The aac_probe_container call blocks. This is an issue because it is called on occasion in the context of the queuecommand handler. Once in a blue moon this has resulted in a kernel panic sleeping during interrupt; or problems with some embedded system versions of the kernel that depend on queuecommand to not block. This ugly patch rewrites the aac_probe_container call into a new routine _aac_probe_container that is an asynchronous state machine to complete the series of operations. The legacy blocking aac_probe_container call used in other areas of the driver (during initialization scanning for all targets and in the separate hot-add/remove [aacraid] thread) merely issues _aac_probe_container and then simple spins calling schedule() waiting for completion. Signed-off-by: Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-27[SCSI] aacraid: expanded expose physical device code (new)Mark Haverkamp
Received from Mark Salyzyn, Take the expose_physicals flag and allow the user to select default (physicals available via /dev/sg), exposed (physicals available via /dev/sd for experimental reasons) and hidden (physicals blocked from all access). This expands the functionality of the previous expose_physicals insmod parameter which was added to support some experimental configurations. Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27[SCSI] aacraid: rework packet support codeMark Haverkamp
Received from Mark Salyzyn, Replace all if/else packet formations with platform function calls. This is in recognition of the proliferation of read and write packet types, and in the need to migrate to up-and-coming packets for new products. Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[SCSI] aacraid: expose physical devicesMark Haverkamp
Received from Mark Salyzyn: I am placing this functionality into an insmod parameter. Normally the physical components are exported to sg, and are blocked from showing up in sd. Note that the pass-through I/O path via the driver through the Firmware to the physical disks is not an optimized path, the card is designed for Hardware RAID, elevator sorting and caching. This should not be used as a means for utilizing the aacraid based controllers as a generic scsi/SATA/SAS controller, performance should suck by a few percentage points, any RAID meta-data on the drives will confuse the controller about who owns the drives and there is a high risk of destroying content in both directions. Unreliable and for experimentation or strange controlled circumstances only. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-24[SCSI] aacraid: misc cleanupMark Haverkamp
Received from Mark Salyzyn: Basically cleanup, nothing here will have an affect. Adjusting some error codes, removing superfluous definitions and code fragments. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] aacraid: Reset adapter in recovery timeoutMark Haverkamp
Received from Mark Salyzyn If the adapter is in blinkled (Firmware Assert) when error recovery timeout actions have been triggered, perform an adapter warm reset and restart the initialization. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] aacraid: Check for unlikely errorsMark Haverkamp
Received from Mark Salyzyn The enclosed patch cleans up some code fragments, adds some paranoia (unproven causes of potential driver failures). Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-23[PATCH] More BUG_ON conversionEric Sesterhenn
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10[SCSI] drivers/scsi: Use ARRAY_SIZE macroTobias Klauser
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of the macro. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-06[SCSI] fix up request buffer reference in various scsi driversChristoph Hellwig
Various scsi drivers use scsi_cmnd.buffer and scsi_cmnd.bufflen in their queuecommand functions. Those fields are internal storage for the midlayer only and are used to restore the original payload after request_buffer and request_bufflen have been overwritten for EH. Using the buffer and bufflen fields means they do very broken things in error handling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: adjustable timeoutsMark Haverkamp
Received From Mark Salyzyn Add the ability to adjust for unusual corner case failures. Both of these additional module parameters deal with embedded, non-intel or complicated system scenarios. Aif_timeout can be increased past the default 2 minute timeout to drop application registrations when a system has an unusually high event load resulting from continuing management requests, or simultaneous builds, or sluggish user space as a result of system load. Startup_timeout can be increased past the default 3 minute timeout to drop an adapter initialization for systems that have a very large number of targets, or slow to spin-up targets, or a complicated set of array configurations that extend the time for the firmware to declare that it is operational. This timeout would only have an affect on non-intel based systems, as the (more patient) BIOS would generally be where the startup delay would be dealt with. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: optimize sg allocMark Haverkamp
Received From Mark Salyzyn Slight space and speed efficiency improvement. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Driver version updateMark Haverkamp
Received from Mark Salyzyn Fix module param Update driver version. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: General driver cleanupMark Haverkamp
Received from Mark Salyzyn Remove superfluous code, optimize code, harden code, cast code, correct some text, use msleep instead of schedule_timeout_interruptible. No bugs. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Track command ownership in driverMark Haverkamp
Received from Mark Salyzyn The loss of the ownership flags, despite their flaws, in the scsi command were sorely missed and are reinstated more accurately in the aacraid driver to track commands and permit us to properly handle error recovery actions. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] aacraid: Use scmd_ functionsMark Haverkamp
Received from Mark Salyzyn Clean up the remaining scsi id access methods, drop ID_LUN_TO_CONTAINER macro. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-28[PATCH] Replace 0xff.. with correct DMA_xBIT_MASKMatthias Gehre
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: Matthias Gehre <M.Gehre@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-04[SCSI] aacraid: use no_uld_attach flagMark Haverkamp
Received From Mark Salyzyn. In order to support user tools accessing the array components (SMART, Mode Page information, Cache page adjustments, WWN determination, Firmware updates etc), we take advantage of the no_uld_attach flag and deprecate the code that filters Inquiries to block the requests to array components. The quirk prevents the sd layer from attaching to the components. We also took the opportunity to balance the queue depths based on the total adapter queue depth to the array devices to reduce the chances of starvation. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] aacraid: Update global function namesMark Haverkamp
Received from Mark Salyzyn, Reduce the possibility of namespace collision. Prefix with aac_. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-09[SCSI] aacraid: Fix read capacity 16 return dataMark Haverkamp
Received from Mark Salyzyn. The return data from a read capacity 16 needs to have RTO_EN and PROT_EN zeroed out. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] use scmd_id(), scmd_channel() throughout codeJeff Garzik
Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] aacraid: Newer adapter communication iterface supportMark Haverkamp
Received from Mark Salyzyn. This patch adds the 'new comm' interface, which modern AAC based adapters that are less than a year old support in the name of much improved performance. These modern adapters support both the legacy and the 'new comm' interfaces. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28Merge HEAD from ../scsi-misc-2.6-old James Bottomley
2005-10-28[SCSI] aacraid: fix inquiry pageMark Haverkamp
Received from Mark Salyzyn. This patch uses the adapter supplemental information AdapterTypeText as the default for the array name. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] aacraid: Use DMA mask definesJames Bottomley
From: Mark Haverkamp <markh@osdl.org> Received from Mark Salyzyn. This patch changes the driver over to utilizing the DMA_64BIT_MASK and DMA_32BIT_MASK manifests. Applies to the scsi-rc-fixes-2.6 git tree. Signed-off-by: Mark Haverkamp <markh@osdl.org> Rejects fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26[SCSI] aacraid: fib size math fixMark Haverkamp
Received from Mark Salyzyn from Adaptec. The size of the command packet's scatter gather list maximum size was miscalculated in the low range leading to the driver initialization limiting the maximum i/o size that could go to the Adapter. There were no negative operational side effects resulting from this bad math, only a subtle limit in performance of the Adapter at the top end of the range. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26[SCSI] aacraid: initialization timeoutMark Haverkamp
Received from Mark Salyzyn from Adaptec. In the rare instances where the adapter, or the motherboard, is misbehaving; driver initialization or shutdown becomes problematic. By introducing a 3 minute timeout on the first interrupt driven command during initialization, or the issuance of the adapter shutdown command during driver unload, we can resolve the lockup problems induced by common (but rare) hardware misbehaviors. The timeout during initialization, should it occur, is accompanied by a message presented to the console and the logs indicating that the user should inspect and resolve problems with interrupt routing. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26[SCSI] aacraid: handle AIF hotplug events (update)Mark Haverkamp
Received from Mark Salyzyn from Adaptec. Hotplug sniffs the AIFs (events) from the adapter and if a container change resulting in the device going offline (container zero), online (container zero completed) or changing capacity (morph) it will take actions by calling the appropriate API. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26[SCSI] aacraid: Greater than 2TB capacity supportMark Haverkamp
Received from Mark Salyzyn from Adaptec. There are a few adapters that are capable of creating devices with this large of a capacity, but now that we have the large fib support in, the management applications will be capable of generating them. The problem is, once they are created, the driver will not be able to access the devices correctly without this patch. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-05[SCSI] aacraid: bad BUG_ON fixMark Haverkamp
This was noticed by Doug Bazamic and the fix found by Mark Salyzyn at Adaptec. There was an error in the BUG_ON() statement that validated the calculated fib size which can cause the driver to panic. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28[SCSI] aacraid: Fix aacraid probe breakage (updated)Mark Haverkamp
This patch fixes the bad assumption of the aacraid driver with use_sg. I used the 3w-xxxx driver fix as a guide for this. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08[SCSI] aacraid: correct use of cmd->timeout fieldJames Bottomley
The cmd->timeout field has been obsolete for a while now. While looking to remove it, I came across this use in the aacraid driver. It looks like you want to initialise the firmware with the current timeout of the command (in seconds), so the value I think you should be using is cmd->timeout_per_command. Acked by: Mark Haverkamp <markh@osdl.org> Acked by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-05[SCSI] aacraid: sgraw command supportMark Haverkamp
Received from Mark Salyzyn from Adaptec: This patch adds support for the new raw io command. This new command offers much larger io commands, is more friendly to the internal firmware structure requiring less translation efforts by the firmware and offers support for targets greater than 2TB (patch to support >2TB will be sent in the future). Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-05[SCSI] aacraid: remove duplicate io callback codeMark Haverkamp
Received from Mark Salyzyn from Adaptec: This patch removes the duplicate code in the write_callback command completion handler, and renames read_callback to io_callback. Optimized the lba calculation into the debug print routine macro to optimize the i/o code path. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] aacraid: New products patchMark Haverkamp
This patch add the following products to the driver: IBM ServeRAID 8i ICP 9014R0 ICP 9024R0 ICP 9047MA ICP 9087MA ICP 9085LI ICP 5085AU Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] 2.6 aacraid: Variable FIB size (updated patch)Mark Haverkamp
New code from the Adaptec driver. Performance enhancement for newer adapters. I hope that this isn't too big for a single patch. I believe that other than the few small cleanups mentioned, that the changes are all related. - Added Variable FIB size negotiation for new adapters. - Added support to maximize scatter gather tables and thus permit requests larger than 64KB/each. - Limit Scatter Gather to 34 elements for ROMB platforms. - aac_printf is only enabled with AAC_QUIRK_34SG - Large FIB ioctl support - some minor cleanup Passes sparse check. I have tested it on x86 and ppc64 machines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] aacraid: remove sparse warningsMark Haverkamp
This patch addresses the sparse -Wbitwise warnings that Christoph wanted me to eliminate. This mostly consisted of making data structure elements of hardware associated structures the __le* equivalent. Although there were a couple places where there was mixing of cpu and le variable math. These changes have been tested on both an x86 and ppc machine running bonnie++. The usage of the LE32_ALL_ONES macro has been eliminated. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] drivers/scsi/aacraid/: make some functions staticAdrian Bunk
This patch makes some needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!