summaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid/comminit.c
AgeCommit message (Collapse)Author
2008-05-02[SCSI] aacraid: Add Power Management supportMark Salyzyn
For firmware that supports the feature(s), add the ability to start or stop an array using the associated SCSI commands, to automatically manage the spin-up of an array on new I/O reporting back the appropriate check conditions and actions in cooperation with the normal timeout mechanisms and enable the blackout period management in the Firmware associated with the background spin-down of the arrays when the Firmware times out and deems the arrays as idle. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-19drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-01-23[SCSI] aacraid: fix big endian issuesSalyzyn, Mark
Big endian systems issues discovered in the aacraid driver. Somewhat reverses a patch from November 7th of last year that removed swap operations because they formerly were being assigned to an u8 array when they should have been assigned to an le32 array. This patch is largely inert for any little endian processor architecture. It resolves a bug in delivering the BlinkLED AIF event to registered applications when the adapter or associated hardware was reset due to ill health. A rare corner case occurrence, also largely unnoticed by any as it was a new (untested!) feature. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-29fix abuses of ptrdiff_tAl Viro
Use of ptrdiff_t in places like - if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len)) + if (!access_ok(VERIFY_WRITE, (u8 __user *) + (ptrdiff_t) u_tmp->rx_buf, + u_tmp->len)) is wrong; for one thing, it's a bad C (it's what uintptr_t is for; in general we are not even promised that ptrdiff_t is large enough to hold a pointer, just enough to hold a difference between two pointers within the same object). For another, it confuses the fsck out of sparse. Use unsigned long or uintptr_t instead. There are several places misusing ptrdiff_t; fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06[SCSI] aacraid: kmalloc/memset->kzallocSalyzyn, Mark
Inspired somewhat by Vignesh Babu <vignesh.babu@wipro.com> patch to dpt_i2o.c to replace kmalloc/memset sequences with kzalloc, doing the same for the aacraid driver. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-01[SCSI] aacraid: resolve compiler warnings using ptrdiff_tSalyzyn, Mark
Unsigned long is not always the same size as a pointer, namely on 32 bit systems with 64 bit address space. Ptrdiff_t is the same size as a pointer in all configurations. By using ptrdiff_t we can mitigate the warning messages on these configurations. There should be no side effects of this patch. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-27[SCSI] aacraid: rework communication support codeMark Haverkamp
Received from Mark Salyzyn, Replace all if/else communication transports with a platform function call. This is in recognition of the need to migrate to up-and-coming transports. Currently the Linux driver does not support two available communication transports provided by our products, these will be added in future patches, and will expand the platform function set. Signed-off-by Mark Haverkamp <markh@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-13[PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24[SCSI] aacraid: merge rx and rkt codeMark Haverkamp
Received from Mark Salyzyn: The only real difference between the rkt and rx platform modules is the offset of the message registers. This patch recognizes this similarity and simplifies the driver to reduce it's code footprint and to improve maintainability by reducing the code duplication. Visibly, the 'rkt.c' portion of this patch looks more complicated than it really is. View it as retaining the rkt-only specifics of the interface. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] aacraid: Check for unlikely errorsMark Haverkamp
Received from Mark Salyzyn The enclosed patch cleans up some code fragments, adds some paranoia (unproven causes of potential driver failures). Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26[SCSI] aacraid: remove x86_64 IOMMU dependent codeSalyzyn, Mark
This may seem like a DILLIGAF, but after chatting with the F/W folks, there is no harm in dropping the page calculation as denoted in the enclosed patch for these older adapters in this new age of 4GB+ memory sticks. Any resource optimization within the old-old-old adapters for systems with less than 4G of memory is of little consequence. The existing AAC_QUIRK_31BIT flag in linit.c should look after the rest of the legacy hardware DMA limitations. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-20[SCSI] aacraid: small misc. cleanupsMark Haverkamp
Received from Mark Salyzyn Spelling correction, orphaned comment removal & update branch name. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-20[SCSI] aacraid: remove unneeded listMark Haverkamp
Received From Mark Salyzyn The queue tracking is just not being used, not even for debugging. Information about outstanding commands can be acquired from the scsi structures. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] aacraid: use kthread_ APIChristoph Hellwig
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Salyzyn, Mark <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04[SCSI] aacraid: Update global function namesMark Haverkamp
Received from Mark Salyzyn, Reduce the possibility of namespace collision. Prefix with aac_. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] aacraid: Newer adapter communication iterface supportMark Haverkamp
Received from Mark Salyzyn. This patch adds the 'new comm' interface, which modern AAC based adapters that are less than a year old support in the name of much improved performance. These modern adapters support both the legacy and the 'new comm' interfaces. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26[SCSI] aacraid: fib size math fixMark Haverkamp
Received from Mark Salyzyn from Adaptec. The size of the command packet's scatter gather list maximum size was miscalculated in the low range leading to the driver initialization limiting the maximum i/o size that could go to the Adapter. There were no negative operational side effects resulting from this bad math, only a subtle limit in performance of the Adapter at the top end of the range. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26[SCSI] aacraid: initialization timeoutMark Haverkamp
Received from Mark Salyzyn from Adaptec. In the rare instances where the adapter, or the motherboard, is misbehaving; driver initialization or shutdown becomes problematic. By introducing a 3 minute timeout on the first interrupt driven command during initialization, or the issuance of the adapter shutdown command during driver unload, we can resolve the lockup problems induced by common (but rare) hardware misbehaviors. The timeout during initialization, should it occur, is accompanied by a message presented to the console and the logs indicating that the user should inspect and resolve problems with interrupt routing. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26[SCSI] aacraid: Greater than 2TB capacity supportMark Haverkamp
Received from Mark Salyzyn from Adaptec. There are a few adapters that are capable of creating devices with this large of a capacity, but now that we have the large fib support in, the management applications will be capable of generating them. The problem is, once they are created, the driver will not be able to access the devices correctly without this patch. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-05[SCSI] aacraid: interupt mitigationMark Haverkamp
Received from Mark Salyzyn from Adaptec: If more than two commands are outstanding to the controller, there is no need to notify the adapter via a PCI bus transaction of additional commands added into the queue; it will get to them when it works through the produce/consumer indexes. This reduced the PCI traffic in the driver to submit a command to the queue to near zero allowing a significant number of commands to be turned around with no need to block for the PCI bridge to flush the notify request to the adapter. Interrupt mitigation has always been present in the driver; it was turned off because of a bug that prevented one from realizing the usefulness of the feature. This bug is fixed in this patch. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] 2.6 aacraid: Variable FIB size (updated patch)Mark Haverkamp
New code from the Adaptec driver. Performance enhancement for newer adapters. I hope that this isn't too big for a single patch. I believe that other than the few small cleanups mentioned, that the changes are all related. - Added Variable FIB size negotiation for new adapters. - Added support to maximize scatter gather tables and thus permit requests larger than 64KB/each. - Limit Scatter Gather to 34 elements for ROMB platforms. - aac_printf is only enabled with AAC_QUIRK_34SG - Large FIB ioctl support - some minor cleanup Passes sparse check. I have tested it on x86 and ppc64 machines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] aacraid: remove sparse warningsMark Haverkamp
This patch addresses the sparse -Wbitwise warnings that Christoph wanted me to eliminate. This mostly consisted of making data structure elements of hardware associated structures the __le* equivalent. Although there were a couple places where there was mixing of cpu and le variable math. These changes have been tested on both an x86 and ppc machine running bonnie++. The usage of the LE32_ALL_ONES macro has been eliminated. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] drivers/scsi/aacraid/: make some functions staticAdrian Bunk
This patch makes some needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!