summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
AgeCommit message (Collapse)Author
2012-02-19[SCSI] qla2xxx: Print mailbox command opcode and return code when a command ↵Chad Dupuis
times out. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Reduce mbx-command timeout for Login/Logout requests.Andrew Vasquez
Don't use default 30 second mailbox-command timeout for these serial requests, instead, limit the TMO to the standard 2*RATOV plus some fudge-factor. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Prep zero-length BSG data-transfer requests.Andrew Vasquez
During command failure/non-recognition, the upper-layer FC-transport expects the drivers to set job-reply->reply_payload_rcv_len. Do this in a consistent manner to avoid duplication. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Perform implicit logout during rport tear-down.Andrew Vasquez
During rport tear-down, make sure we do an implicit LOGO of the fcport in our firmware to try to clear any residual commands associated with that fcport. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Handle failure cases during fabric_loginChad Dupuis
Make sure that all calls to ha->isp_ops->fabric_login() check the return value for failure. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Increase speed of flash access in ISP82xx adapters to ↵Chad Dupuis
improve firmware load speed. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Return blank sysfs string on initial get thermal failure.Joe Carnuccio
When thermal temperature initially fails, return a blank string to the sysfs interface. This fixes the initial display of 0.00 followed by subsequent display of blank line; the initial 0.00 should have not displayed for cards that do not support thermal temperature. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Handle change notifications based on switch scan results.Arun Easi
Instead of processing each RSCN individually, use only the name server results from the switch to tell the existance of a given fcport. Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Correct print format for edc ql_log() calls.Joe Carnuccio
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Use consistent DL mask for ELS/CT passthru requests.Andrew Vasquez
The driver is logging a slew of 'good' status requests for ELS/CT passthrough commands. Change some log messages from: * ql_log() -> ql_dbg() * ql_log_info -> ql_dbg_user Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Consolidation of SRB processing.Giridhar Malavali
Rework the structures related to SRB processing to minimize the memory allocations per I/O and manage resources associated with and completions from common routines. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Use a valid enode-mac if none defined.Andrew Vasquez
Original 'defaults' were not OUI valid. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Enhancements to support ISP83xx.Giridhar Malavali
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla2xxx: Enhanced the dump routines to capture multiple request and ↵Giridhar Malavali
response queues. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Update version number to 8.03.07.13-k.Chad Dupuis
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Remove resetting memory during device initialization for ↵Shyam Sundar
ISP82xx. With IOs running and PegHalt testing the system reboots when memory reset is performed during device initialization. Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization ↵Giridhar Malavali
failures during next reset cycle. Complete the mailbox command timed out before initiating another abort cycle to recover so that mailbox commands issued during next reset cycle don't fail due to pending mailbox access timeout. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Remove check for null fcport from host reset handler.Michael Christie
Remove the check for a NULL fcport so that the host reset will run unconditionally to unwedge any commands before the device is offlined and to prevent a quick runthrough of the SCSI error handling. Signed-off-by: Michael Christie <mchristi@redhat.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers.Andrew Vasquez
ISP2200 adapters only have 24 mailbox registers so read only that many. Reported-by: Olatunji Ruwase <oor@cs.cmu.edu> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB ↵Andrew Vasquez
processing. This can cause instability in mailbox command state machine handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command.Andrew Vasquez
Not clearing the options flags in mbx1 could lead the firmware into interpreting old data in mbx1 through mbx8. This could lead to inadvertent DMA read/write operations to stale memory. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Add an "is reset active" helper.Andrew Vasquez
Many locations within the driver would use an inconsistent set of checks to determine ISP-reset state. Consolidate the checks into this inline-helper. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand.Chad Dupuis
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-18[SCSI] qla2xxx: Propagate up abort failures.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: remove redundant semicolonJesper Juhl
One ';' at the end of the return statement is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Do not check for minidump when device state is ↵Chad Dupuis
QLA82XX_DEV_READY. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Move initialization of some variables before iospace_config.Chad Dupuis
Some variables need to be initialized before we config PCI I/O config space or else strange firmware initialization errors may occur. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Ensure there's enough request-queue space for passthru IOCBs.Andrew Vasquez
The driver should ensure there's a sufficient number of IOCBs to satisfy the number of scatter-gather entries specified in the command. Add a 'count' to the control structure, srb_ctx, to use in qla2x00_alloc_iocbs(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Implement FCP priority tagging for 82xx adapters.Saurav Kashyap
This provides a capability to set a priority in the FCP packet. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Consolidated IOCB processing routines.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Process marker IOCB request on request queue 0.Giridhar Malavali
When multiple request queues are created process the marker IOCB request on request queue 0. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Added a new entry to ISP specific function pointers structure.Giridhar Malavali
Add a new function to ISP specific pointers structure to take care of ISP specific PCI IO space configuration. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Corrected the display of firmware dump availability for ISP82xx.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Corrected the default setting of the help text of Minidump ↵Giridhar Malavali
capture mask. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Corrections to returned sysfs error codes.Joe Carnuccio
Correct the erroneous return codes introduced by the following patch: "Return sysfs error codes appropriate to conditions". Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Correct report-id acquisition checkGiridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Fix to include FCE data as part of dump.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Limit excessive DPC cycles.Andrew Vasquez
The 'continue' cases neglected to place the thread in an interruptible state, causing the DPC routine to wake immediately. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Only read requested mailbox registers.Andrew Vasquez
When reading the incoming mailbox registers, read only the specified ones. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Proper cleanup of pass through commands when firmware ↵Giridhar Malavali
returns error. [jejb: fixed up checkpatch and casting errors] Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Update to dynamic logging.Chad Dupuis
This patch contains minor fixes to our new logging infrastructure: - Remove extranous messages. - Re-add 'nexus' and 'hdl' information. - Adjusted the message ids to fill up the holes. - Display FCP_CMND priority on update. - Log only mail box error conditions. - Do not print "Firmware ready **** FAILED ****" if cable is unplugged. - Drop noisy 'fw_state...curr time...' message. - Correct nexus display during abort. - Add a special case error-logging set to '1'. - Catagorize I/O exception display handling. - Correct the bsg msg code printing. - Dont use dynamic logging after host is removed. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Make the logging functions verify their arguments and fixed ↵Joe Perches
the current broken uses as appropriate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla2xxx: Use less stack to emit logging messages.Joe Perches
Return early when logging level too low. Use normal kernel codeing style for function braces. Add const where appropriate to logging functions. Remove now unused #define QL_DBG_BUF_LEN. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Update version number to 8.03.07.12-k.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Submit all chained IOCBs for passthrough commands on request ↵Giridhar Malavali
queue 0. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Correct fc_host port_state display.Saurav Kashyap
[jejb: checkpatch fixes] Add more fine grain parsing of vha->loop_state to export a more accurate fc_host port_state. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Disable generating pause frames when firmware hang detected ↵Giridhar Malavali
for ISP82xx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Clear mailbox busy flag during premature mailbox completion ↵Giridhar Malavali
for ISP82xx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Encapsulate prematurely completing mailbox commands during ↵Chad Dupuis
ISP82xx firmware hang. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v0.10.2 at 2024-10-27 14:50:32 (GMT)