summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2009-01-25[SCSI] ibmvfc: Fix DMA mapping leak on memory allocation failureBrian King
There is currently a DMA mapping leak that can occur in the ibmvfc driver if we fail to allocate a scatterlist. Fix this by unmapping the scatterlist in the failure path. Additionally, only log an error for a scatterlist allocation failure if the log level is greater than the default, since this can occur when running Active Memory Sharing and this is not considered an error. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Update version number to 8.03.00-k2.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Add checks for a valid fcport in ↵Seokmann Ju
dev-loss-tmo/terminate_rport_io callbacks. Commit f78badb1ae07e7f8b835ab2ea0b456ed3fc4caf4 ([SCSI] fc transport: pre-emptively terminate i/o upon dev_loss_tmo timeout) changed the callback semantics of dev_loss_tmo and terminate_rport_io such that repeated calls could be made. This could result in the the driver using stale (NULLed-out, in dev_loss_tmo) data from the rport. Correct this by addint a simple check to ensure a valid fcport is attached. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations.Andrew Vasquez
Jeremy Higdon noted (http://marc.info/?l=linux-scsi&m=123262143131788&w=2) that the rework done in commit e315cd28b9ef0d7b71e462ac16e18dbaa2f5adfe was not setting the proper consistent and streaming DMA masks prior to memory allocations. Correct this and remove the unnecessary prototype. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Correct descriptions in flash manipulation routines.Joe Carnuccio
When clearing the flash device's SR, the comment is incorrect... clearing the SR is 2 steps: 1. the SR protect bit is 1, so the first write zero clears only that bit, 2. the SR protect bit is now 0, so the next write zero clears the remaining bits. The sector erase debug print more correctly identifies that the erase failed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Correct regression in EH abort handling.Andrew Vasquez
Commit 73208dfd7ab19f379d73e8a0fbf30f92c203e5e8 (qla2xxx: add support for multi-queue adapter) inadvertently backed-out the fix in 5bff55db3dc4d659f46b4d2fce2f61c1964c2762 (qla2xxx: Return a FAILED status when abort mailbox-command fails.). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Correct endianness issue during flash manipulation.Andrew Vasquez
The flash data was incorrectly being converted (cpu_to_le32()) when using the bulk-flash-write mailbox command (ISP25xx and above). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode.Lalit Chandivade
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.Andrew Vasquez
Pre-ISP81XX parts (including ISP24xx and ISP25xx) could contain a firmware image within a segment of flash, driver would fallback to loading this firmware if the request-firmware interface failed (userspace .bin file). Moving forward, all ISP81XX parts will ship with a suggested-to-be-used firmware image within flash which all driver should first attempt to load. If the flash firmware load fails, the driver will then fallback to loading firmware via the request-firmware interface (ql8100_fw.bin). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Always serialize mailbox command execution.Andrew Vasquez
Original code would incorrectly bypass serialization if the DPC thread were performing a big-hammer operation (ISP abort). This short circuit, though rare, would subsequently stomp on a secondary thread's mailbox command execution. Found during ISP81XX testing. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for ↵Andrew Vasquez
IS_NOPOLLING_TYPE() ISPs. Original code should work as well given qla24xx_reset_adapter() is only called in extreme cases where the HBA is taken offline. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger ↵Andrew Vasquez
flash parts. Also removes unneeded 'findex' local variable within routine. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla2xxx: Fix memory leak in error pathAnirban Chakraborty
Reviewed-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] qla4xxx: do not reuse session when connecting to different target portMike Christie
qla4xxx does not check the I_T nexus values correctly so it ends up creating one session to the target. If a portal should disappear or they should be reported in different order the driver will think it is already logged in when it could now be speaking to a different target portal or accessing it through a different initiator port (iscsi initiator port is not tied to hardware and is just the initiator name plus isid so you could end up with multiple ports through one host). This patch has the driver check the iscsi scsi port values when matching sessions (we do not check the initiator name because that is static). It results in a portal from each target portal group getting logged into instead of just one per target. In the future the firmware should hopefully send us notification of other sessions that are created to other portals within the same tpgt and the sessions should have different isids. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-25[SCSI] libiscsi: fix iscsi pool leakMike Christie
I am not sure what happened. It looks like we have always leaked the q->queue that is allocated from the kfifo_init call. nab finally noticed that we were leaking and this patch fixes it by adding a kfree call to iscsi_pool_free. kfifo_free is not used per kfifo_init's instructions to use kfree. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-16Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: serial: Add 16850 uart type support to OF uart driver hvc_console: Remove tty->low_latency powerpc: Get the number of SLBs from "slb-size" property powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices powerpc/ps3: printing fixups for l64 to ll64 conversion drivers/video powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsi powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3 powerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppc powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/char powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/block powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc powerpc/ps3: ps3_repository_read_mm_info() takes u64 * arguments powerpc/ps3: clear_bit()/set_bit() operate on unsigned longs powerpc/ps3: The lv1_ routines have u64 parameters powerpc/ps3: Use dma_addr_t down through the stack powerpc/ps3: set_dabr() takes an unsigned long powerpc: Cleanup from l64 to ll64 change drivers/scsi
2009-01-16Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_fsl: Return non-zero on error in probe() drivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha build libata: New driver for OCTEON SOC Compact Flash interface (v7). libata: Add another column to the ata_timing table. sata_via: Add VT8261 support pata_atiixp: update port enabledness test handling [libata] get-identity ioctl: Fix use of invalid memory pointer
2009-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Skip deleted devices in __scsi_device_lookup_by_target() [SCSI] Add SUN Universal Xport to no attach blacklist [SCSI] iscsi_tcp: make padbuf non-static [SCSI] mpt fusion: Add Firmware debug support [SCSI] mpt fusion: Add separate msi enable disable for FC,SPI,SAS [SCSI] mpt fusion: Update MPI Headers to version 01.05.19 [SCSI] qla2xxx: Fix ISP restart bug in multiq code
2009-01-16[libata] get-identity ioctl: Fix use of invalid memory pointerJeff Garzik
for SAS drivers. Caught by Ke Wei (and team?) at Marvell. Also, move the ata_scsi_ioctl export to libata-scsi.c, as that seems to be the general trend. Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsiStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc: Cleanup from l64 to ll64 change drivers/scsiStephen Rothwell
This is a powerpc specific driver. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-13[SCSI] Skip deleted devices in __scsi_device_lookup_by_target()Hannes Reinecke
__scsi_device_lookup_by_target() will always return the first sdev with a matching LUN, regardless of the state. However, when this sdev is in SDEV_DEL scsi_device_lookup_by_target() will ignore this device and so any valid device on the list after the deleted device will never be found. So we have to modify __scsi_device_lookup_by_target() to skip any device in SDEV_DEL. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13[SCSI] Add SUN Universal Xport to no attach blacklistILLES, Marton
I was using a Sun ST2510 device (iSCSI) and a special "block device" appeared which is used by SUN Common Array Manager in-band management. However it also appeared as a block device and caused some IO error: [ 716.868000] scsi 15:0:0:31: Direct-Access SUN Universal Xport 0735 PQ: 0 ANSI: 5 [ 716.868000] qla4xxx 0000:04:01.1: scsi(15:0:0:31): Enabled tagged queuing, queue depth 32. [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.868000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.868000] sd 15:0:0:31: [sdf] 40960 512-byte hardware sectors (21 MB) [ 716.868000] sd 15:0:0:31: [sdf] Write Protect is off [ 716.868000] sd 15:0:0:31: [sdf] Mode Sense: 77 00 10 08 [ 716.872000] sd 15:0:0:31: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 716.872000] sdf: unknown partition table [ 716.932000] sd 15:0:0:31: [sdf] Attached SCSI disk [ 716.932000] sd 15:0:0:31: Attached scsi generic sg6 type 0 [ 717.412000] end_request: I/O error, dev sdf, sector 40 [ 717.412000] Buffer I/O error on device sdf, logical block 5 [ 717.412000] Buffer I/O error on device sdf, logical block 6 [ 717.412000] Buffer I/O error on device sdf, logical block 7 [ 717.412000] Buffer I/O error on device sdf, logical block 8 [ 717.412000] Buffer I/O error on device sdf, logical block 9 [ 717.412000] Buffer I/O error on device sdf, logical block 10 [ 717.412000] Buffer I/O error on device sdf, logical block 11 [ 717.412000] Buffer I/O error on device sdf, logical block 12 [ 717.412000] Buffer I/O error on device sdf, logical block 13 [ 717.412000] Buffer I/O error on device sdf, logical block 14 After some googling it appeared that similar issue has been solved for SGI/IBM devices in 4869040512082b761de2d7c35975d01044f8bfea, so here is the patch for SUN, please apply. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13[SCSI] iscsi_tcp: make padbuf non-staticKaren Xie
virt_to_page() call should not be used on kernel text and data addresses. virt_to_page() is used by sg_init_one(). So change padbuf to be allocated within iscsi_segment. Signed-off-by: Karen Xie <kxie@chelsio.com> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13[SCSI] qla2xxx: Fix ISP restart bug in multiq codeAnirban Chakraborty
After restarting ISP the additional queues are not being setup correctly. The following patch fixes the issue. Please apply. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13powerpc: Change u64/s64 to a long long integer typeIngo Molnar
Convert arch/powerpc/ over to long long based u64: -#ifdef __powerpc64__ -# include <asm-generic/int-l64.h> -#else -# include <asm-generic/int-ll64.h> -#endif +#include <asm-generic/int-ll64.h> This will avoid reoccuring spurious warnings in core kernel code that comes when people test on their own hardware. (i.e. x86 in ~98% of the cases) This is what x86 uses and it generally helps keep 64-bit code 32-bit clean too. [Adjusted to not impact user mode (from paulus) - sfr] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] qla2xxx: Update version number to 8.03.00-k1. [SCSI] qla2xxx: Add ISP81XX support. [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations. [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump. [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump. [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages. [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled. [SCSI] qla2xxx: Remove support for reading/writing HW-event-log. [SCSI] cxgb3i: add missing include [SCSI] scsi_lib: fix DID_RESET status problems [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD [SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts [SCSI] sd: Correctly handle 6-byte commands with DIX [SCSI] sd: DIF: Fix tagging on platforms with signed char [SCSI] sd: DIF: Show app tag on error [SCSI] Fix error handling for DIF/DIX [SCSI] scsi_lib: don't decrement busy counters when inserting commands [SCSI] libsas: fix test for negative unsigned and typos [SCSI] a2091, gvp11: kill warn_unused_result warnings [SCSI] fusion: Move a dereference below a NULL test ... Fixed up trivial conflict due to moving the async part of sd_probe around in the async probes vs using dev_set_name() in naming.
2009-01-08powerpc: Fix iseries drivers build failure without CONFIG_VIOPATHKamalesh Babulal
iSeries dependent drivers fail to build, when CONFIG_VIOPATH is disabled. Fix the problem by making those drivers select it. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-asyncLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async: async: don't do the initcall stuff post boot bootchart: improve output based on Dave Jones' feedback async: make the final inode deletion an asynchronous event fastboot: Make libata initialization even more async fastboot: make the libata port scan asynchronous fastboot: make scsi probes asynchronous async: Asynchronous function calls to speed up kernel boot
2009-01-07[SCSI] qla2xxx: Update version number to 8.03.00-k1.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] qla2xxx: Add ISP81XX support.Andrew Vasquez
Codes to support new FCoE boards. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.Andrew Vasquez
Original code would inadvertanly place I/Os on the default request-queue. Also, correctly pass in the proper MSI-X vector during response-queue initialization. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.Andrew Vasquez
Original code would not read request/response queue pointers. Also, collapse code into a helper qla25xx_copy_mq() function in preparation for newer ISP parts. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.Andrew Vasquez
In preparation for new ISP types with varying dump procedures. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization ↵Andrew Vasquez
with MSI-X enabled. ROMs in recent ISPs have MSI-X support, so it's no longer necessary for the driver to fallback to interrupt polling during ISP re-initialization. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] qla2xxx: Remove support for reading/writing HW-event-log.Andrew Vasquez
Software should not touch this region of flash, as the firmware will be the only writer and consumer of the region. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] cxgb3i: add missing includeAl Viro
it needs scatterlist.h - indirect chain of includes doesn't work on a lot of targets. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Karen Xie <kxie@chelsio.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07[SCSI] scsi_lib: fix DID_RESET status problemsJames Bottomley
Andrew Vaszquez said: > There's a problem that is causing commands returned by the LLD with > a DID_RESET status to be reissued with cleared cmd->sdb data which > in our tests are manifesting in firmware detected overruns. Here's > a snippet of a READ_10 scsi_cmnd upon completion by the storage The problem is caused by: commit b60af5b0adf0da24c673598c8d3fb4d4189a15ce Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon Nov 3 15:56:47 2008 -0500 [SCSI] simplify scsi_io_completion() Because scsi_release_buffers() is called before commands that go through the ACTION_RETRY and ACTION_DELAYED_RETRY legs are requeued. However, they're not re-prepared, so nothing ever reallocates the buffer resources to them. Fix this by releasing the buffers only if we're not going to go down these legs (but scsi_release_buffers() on all legs including two in scsi_end_request(); this latter needs a special version __scsi_release_buffers() because the final one can be called after the request has been freed, so the bidi test in scsi_release_buffers(), which touches the request has to be skipped). Reported-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-07fastboot: make scsi probes asynchronousArjan van de Ven
This patch makes part of the scsi probe (which is mostly device spin up and the partition scan) asynchronous. Only the part that runs after getting the device number allocated is asynchronous, ensuring that device numbering remains stable. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-06[SCSI] fc transport: restore missing dev_loss_tmo callback to LLDDJames Smart
When we reworked the transport for the rport lifetimes, in cases where the rport was reused as a container for tgt id bindings, we inadvertantly removed the callback to the driver indicating that dev_loss_tmo had fired. This patch restores that functionality. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-06trivial: Fix misspelling of "firmware" in qla1280.cNick Andrew
Fix misspelling of "firmware" in qla1280.c It's spelled "firmware". Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06trivial: Fix misspelling of "firmware" in a100u2w.cNick Andrew
Fix misspelling of "firmware" in a100u2w.c It's spelled "firmware". Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06trivial: Fix misspelling of "firmware" in megaraid.cNick Andrew
Fix misspelling of "firmware" in megaraid.c Fixed "firmware", "ownership" and grammar in the same comment. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06trivial: Fix misspelling of "firmware" in ql4_mbx.cNick Andrew
Fix misspelling of "firmware" in ql4_mbx.c It's spelled "firmware". Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-06trivial: fix singal -> signal typoFrederik Schwarzer
Typo fix. Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-05[SCSI] aha152x_cs: Fix regression that keeps driver from using shared interruptsLarry Finger
At some point since 2.6.22, the aha152x_cs driver stopped working and started erring on load with the following messages: kernel: pcmcia: request for exclusive IRQ could not be fulfilled. kernel: pcmcia: the driver needs updating to supported shared IRQ lines. With the following change, the driver works with shared IRQs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.28], [2.6.27], [2.6.26] Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-05[SCSI] sd: Correctly handle 6-byte commands with DIXMartin K. Petersen
DIF does not work with 6-byte commands so we previously ignored those commands when preparing a request. However, DIX does not need RDPROTECT/WRPROTECT to be set and 6-byte commands are consequently perfectly valid in host-only mode. This patch fixes a problem where we would set the wrong DIX operation when issuing commands to a legacy disk. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-05[SCSI] sd: DIF: Fix tagging on platforms with signed charMartin K. Petersen
Switch tag arrays to u8 to prevent problems on platforms with signed char. Reported-by: Tim LaBerge <tim.laberge@Quantum.Com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>