summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2012-02-13Fix section mismatch in spi-pl022.cRussell King
WARNING: drivers/spi/built-in.o(.devinit.text+0xdb8): Section mismatch in reference from the function pl022_probe() to the function .init.text:pl022_dma_probe() The function __devinit pl022_probe() references a function __init pl022_dma_probe(). If pl022_dma_probe is only used by pl022_probe then annotate pl022_dma_probe with a matching annotation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-06spi-topcliff-pch: rename pch_spi_pcidev to pch_spi_pcidev_driverDanny Kukawka
Rename static struct pci_driver pch_spi_pcidev to pch_spi_pcidev_driver to get rid of warnings from modpost checks. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-06spi: Add spi-s3c64xx driver dependency on ARCH_EXYNOS4Sylwester Nawrocki
The spi-s3c64xx driver is also used on Exynos4 so update the dependency to enable build on those platforms. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [grant.likely: relax depends to ARCH_EXYNOS instead of ARCH_EXYNOS4] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-18Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-14Merge tags 'devicetree-for-linus' and 'spi-for-linus' of ↵Linus Torvalds
git://git.secretlab.ca/git/linux-2.6 2nd set of device tree changes and SPI bug fixes for v3.3 * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: of/irq: Add interrupts-names property to name an irq resource of/address: Add reg-names property to name an iomem resource * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: spi/tegra: depend instead of select TEGRA_SYSTEM_DMA
2012-01-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile
2012-01-09Merge tag 'cleanup2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Cleanups for the Samsung platforms Various cleanup changes that the device driver changes are built upon. Since the samsung cleanups depend on the device tree series, which depends on the first set of cleanups for tegra. * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: EXYNOS: Use gpio_request_one ARM: S5PV210: Use gpio_request_one ARM: S3C64XX: Modified according to SPI consolidation work ARM: S5PV210: Modified files for SPI consolidation work ARM: S5P64X0: Modified files for SPI consolidation work ARM: S5PC100: Modified files for SPI consolidation work ARM: S3C64XX: Modified files for SPI consolidation work ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung ARM: SAMSUNG: Remove SPI bus clocks from platform data ARM: S5PV210: Add SPI clkdev support ARM: S5P64X0: Add SPI clkdev support ARM: S5PC100: Add SPI clkdev support ARM: S3C64XX: Add SPI clkdev support spi/s3c64xx: Use bus clocks created using clkdev mmc: sdhci-s3c: Use generic clock names for sdhci bus clock options ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names ARM: SAMSUNG: Remove SDHCI bus clocks from platform data ARM: SAMSUNG: Use kmemdup rather than duplicating its implementation ARM: EXYNOS: remove exynos4_scu_enable()
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-07Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
spi changes queued up for v3.3 merge window * tag 'spi-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6: spi: Fix device unregistration when unregistering the bus master spi-topcliff-pch: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor spi-topcliff-pch: Support new device LAPIS Semiconductor ML7831 IOH spi/omap: Correct the error path spi/omap: call pm_runtime_disable in error path and remove spi/omap: Use a workqueue per omap2_mcspi controller
2012-01-07Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
Changes queued in gpio/next for the start of the 3.3 merge window * tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6: gpio: Add decode of WM8994 GPIO configuration gpio: Convert GPIO drivers to module_platform_driver gpio: Fix typo in comment in Samsung driver gpio: Explicitly index samsung_gpio_cfgs gpio: Add Linus Walleij as gpio co-maintainer of: Add device tree selftests of: create of_phandle_args to simplify return of phandle parsing data gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags() gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags() gpiolib: output basic details and consolidate gpio device drivers pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH spi/pl022: make the chip deselect handling thread safe spi/pl022: add support for pm_runtime autosuspend spi/pl022: disable the PL022 block when unused spi/pl022: move device disable to workqueue thread spi/pl022: skip default configuration before suspending spi/pl022: fix build warnings spi/pl022: only enable RX interrupts when TX is complete
2012-01-07Merge branch 'amba-modalias' of ↵Linus Torvalds
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: sound: aaci: Enable module alias autogeneration for AMBA drivers watchdog: sp805: Enable module alias autogeneration for AMBA drivers fbdev: amba: Enable module alias autogeneration for AMBA drivers serial: pl011: Enable module alias autogeneration for AMBA drivers serial: pl010: Enable module alias autogeneration for AMBA drivers spi: pl022: Enable module alias autogeneration for AMBA drivers rtc: pl031: Enable module alias autogeneration for AMBA drivers rtc: pl030: Enable module alias autogeneration for AMBA drivers mmc: mmci: Enable module alias autogeneration for AMBA drivers input: ambakmi: Enable module alias autogeneration for AMBA drivers gpio: pl061: Enable module alias autogeneration for AMBA drivers dmaengine: pl330: Enable module alias autogeneration for AMBA drivers dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers hwrng: nomadik: Enable module alias autogeneration for AMBA drivers ARM: amba: Auto-generate AMBA driver module aliases during modpost ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-05Merge branch 'spi/next' (early part) into spi/mergeGrant Likely
2012-01-02spi/tegra: depend instead of select TEGRA_SYSTEM_DMAOlof Johansson
It's unlikely that anyone ever wants to turn off SYSTEM_DMA, but just in case, it makes more sense to have the driver depend on it than select it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-23spi/s3c64xx: Use bus clocks created using clkdevPadmavathi Venna
This patch modifies the driver to stop depending on the clock names being passed from platform and switch over to lookup clocks generic names using clkdev Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-13spi: Fix device unregistration when unregistering the bus masterLaurent Pinchart
Device are added as children of the bus master's parent device, but spi_unregister_master() looks for devices to unregister in the bus master's children. This results in the child devices not being unregistered. Fix this by registering devices as direct children of the bus master. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13Merge branch 'pl022' of ↵Grant Likely
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into gpio/next
2011-12-07MIPS: Alchemy: Au1300 SoC supportManuel Lauss
Add basic support for the Au1300 variant(s): - New GPIO/Interrupt controller - DBDMA ids - USB setup - MMC support - enable various PSC drivers - detection code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2866/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07spi/gpio: fix section mismatch warningManuel Lauss
Fixes: The function __devinit spi_gpio_probe() references a function __init spi_gpio_alloc.isra.4(). If spi_gpio_alloc.isra.4 is only used by spi_gpio_probe then annotate spi_gpio_alloc.isra.4 with a matching annotation. [wsa: fix spi_gpio_request(), too] Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2011-12-07spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m buildJiri Slaby
When spi_fsl_espi is chosen to be built as a module, there is a build error because we test only CONFIG_SPI_FSL_ESPI in declaration of struct mpc8xxx_spi in drivers/spi/spi_fsl_lib.h. Also some called functions are not exported. So we forbid CONFIG_SPI_FSL_ESPI to be tristate here. The error looks like: drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_bufs': drivers/spi/spi_fsl_espi.c:232: error: 'struct mpc8xxx_spi' has no member named 'len' ... Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2011-12-07spi/nuc900: Include linux/module.hAxel Lin
Include linux/module.h to fix below build error: CC drivers/spi/spi-nuc900.o drivers/spi/spi-nuc900.c:484: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-nuc900.c:489: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:489: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:489: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-nuc900.c:489: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:490: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:490: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:490: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-nuc900.c:490: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:491: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:491: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:491: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-nuc900.c:491: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:492: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:492: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:492: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-nuc900.c:492: warning: function declaration isn't a prototype make[2]: *** [drivers/spi/spi-nuc900.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2011-12-07spi/ath79: fix compile error due to missing includeGabor Juhos
Whithout including 'linux/module.h' spi-ath79 driver fails to compile with the these errors: drivers/spi/spi-ath79.c:273:12: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-ath79.c:278:20: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:278:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:278:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-ath79.c:278:20: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:279:15: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:279:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:279:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-ath79.c:279:15: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:280:16: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:280:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:280:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-ath79.c:280:16: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:281:14: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:281:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:281:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-ath79.c:281:14: warning: function declaration isn't a prototype Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2011-12-01spi/pl022: make the chip deselect handling thread safeVirupax Sadashivpetimath
There is a possibility that the pump_message and giveback run in parallel on a SMP system. Both the pump_message and giveback threads work on the same SPI message queue. Results will be in correct if the pump_message gets to work on the queue first. when the pump_message works with the queue, it reads the head of the queue and removes it from the queue. pump_message activates the chip select depending on this message read. This leads to giveback working on the modified queue or a emptied queue. If the queue is empty or if the next message on the queue (which is not the actual next message, as the pump message has removed the next message from the queue) is not for the same SPI device as that Of the previous one, giveback will de-activate the chip select activated by pump_message(), which is wrong. To solve this problem pump_message is made not to run and access the queue until the giveback is done handling the queue. I.e. by making the cur_msg NULL after the giveback has read the queue. Also a state variable has been introduced to keep track of when the CS for next message is already activated and avoid to double-activate it. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-01spi/pl022: add support for pm_runtime autosuspendChris Blair
Adds support for configuring the spi bus to use autosuspend for runtime power management. This can reduce the latency in starting an spi transfer by not suspending the device immediately following completion of a transfer. If another transfer then takes place before the autosuspend timeout, the call to resume the device can return immediately rather than needing to risk sleeping in order to resume the device. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Blair <chris.blair@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-01spi/pl022: disable the PL022 block when unusedVirupax Sadashivpetimath
Make sure we clear the enable bit when the block is not used. This will save some energy in certain hardware versions. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-01spi/pl022: move device disable to workqueue threadChris Blair
Moves the disabling of the device and clocks to the same thread in which the device and clocks are enabled. This avoids SMP issues where the device can be enabled for a transfer by one thread and then disabled by the completion of the previous transfer in another thread. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Blair <chris.blair@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-01spi/pl022: skip default configuration before suspendingVirupax Sadashivpetimath
The loading of the default configuration before suspending has been in the driver since its inception, but it is not really needed. Especially so since we take to all the trouble of enabling and disabling power and clock just to do this. Let's scrap this now. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-01spi/pl022: fix build warningsJonas Aaberg
The driver build complains with newer compilers unless you initialize this struct properly. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-12-01spi/pl022: only enable RX interrupts when TX is completeChris Blair
For interrupt mode transfers, start with only TX interrupts enabled to reduce the overall number of interrupts received. Once TX is complete, enable RX interrupts to complete the transfer. Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Chris Blair <chris.blair@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-26ARM: 7175/1: add subname parameter to mfp_set_groupg callersAxel Lin
commit 798681bf "ARM: 7158/1: add new MFP implement for NUC900" adds subname parameter for mfp_set_groupg. Thus add subname parameter to the callers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-22spi: pl022: Enable module alias autogeneration for AMBA driversDave Martin
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2011-11-20Merge branch 'fixes' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: wire up process_vm_writev and process_vm_readv syscalls ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list ARM: 7158/1: add new MFP implement for NUC900 ARM: 7157/1: fix a building WARNING for nuc900 ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF ARM: 7155/1: arch.h: Declare 'pt_regs' locally ARM: 7154/1: mach-bcmring: fix build error in dma.c ARM: 7153/1: mach-bcmring: fix build error in core.c ARM: 7152/1: distclean: Remove generated .dtb files ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors ARM: 7149/1: spi/pl022: Enable clock in probe Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"
2011-11-17Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul
resolved conflicts: drivers/media/video/mx3_camera.c
2011-11-14spi: drop "select SPI_MASTER_OF"Paul Bolle
There is no Kconfig symbol named SPI_MASTER_OF. The select statement for that symbol is a nop. Drop it. While we're touching that Kconfig entry also drop a superfluous dependency on SPI (this entry is wrapped in "if SPI" / "endif"). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-09atmel/spi: fix missing probeJean-Christophe PLAGNIOL-VILLARD
Commit 940ab889 "drivercore: Add helper macro for platform_driver boilerplate" converted this driver to use module_platform_driver, but due to the use of platform_driver_probe(), this resulted in the call to atmel_spi_probe being lost. Place the call to this function into the driver structure. fix section missmatch atmel_spi_probe is marked __init where it's supposed to be __devinit atmel_spi_remove is marked __exit where it's supposed to be __devexit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-08ARM: 7149/1: spi/pl022: Enable clock in probeUlf Hansson
Make sure we enable the clock before leaving probe. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-05Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-10-31spi: Add export.h for THIS_MODULE/EXPORT_SYMBOL to spi.cPaul Gortmaker
This uses both EXPORT_SYMBOL and THIS_MODULE, both which come from the export.h file now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31spi: Add module.h to implicit users in drivers/spiPaul Gortmaker
We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31spi, serial: move to dma_transfer_directionVinod Koul
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves spi, serial drivers to use new enum Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
2011-10-29spi-topcliff-pch: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Co., Ltd. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29spi-topcliff-pch: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA
ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: drivercore: Add helper macro for platform_driver boilerplate spi: irq: Remove IRQF_DISABLED OMAP: SPI: Fix the trying to free nonexistent resource error spi/spi-ep93xx: add module.h include spi/tegra: fix compilation error in spi-tegra.c spi: spi-dw: fix all sparse warnings spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate spi/spi-pl022: Don't allocate more sg than required. spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet spi/spi-pl022: Resolve formatting issues
2011-10-29spi/omap: Correct the error pathShubhrajyoti D
Currently McSPI driver doesnt follow correct failure fallback steps attempting to correct the same. Also: - label names changed to give meaningful names. - Setting the driver data to NULL in remove Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29spi/omap: call pm_runtime_disable in error path and removeShubhrajyoti D
omap mcspi probe() doesnt call pm_runtime disable functions in case of failure. remove() doesnt call pm_runtime disable. This could lead to warnings as below on subsequent insmod. ~# insmod spi-omap2-mcspi.ko [ 255.383671] omap2_mcspi omap2_mcspi.1: Unbalanced pm_runtime_enable! ... This patch adds the pm_runtime disable() at appropriate stages. Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-29spi/omap: Use a workqueue per omap2_mcspi controllerShubhrajyoti D
Currently all the spi controllers share the work queue. This patch allocates a work queue per controller. Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-27Merge branch 'clk' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7131/1: clkdev: Add Common Macro for clk_lookup clk: spi-pl022: convert to clk_prepare()/clk_unprepare() clk: timer-sp: convert to clk_prepare()/clk_unprepare() clk: sa1111: convert to clk_prepare()/clk_unprepare() clk: mmci: convert to clk_prepare()/clk_unprepare() clk: amba-pl011: convert to clk_prepare()/clk_unprepare() clk: amba-pl010: convert to clk_prepare()/clk_unprepare() clk: amba-clcd: convert to clk_prepare()/clk_unprepare() clk: amba bus: convert to clk_prepare()/clk_unprepare() clk: provide prepare/unprepare functions
2011-10-27Merge branch 'amba' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7079/1: spi: Fix builderror in spi-pl022.c PM: add runtime PM support to MMCI PM: add runtime PM support to core Primecell driver
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
generated by cgit v0.10.2 at 2024-11-06 02:00:26 (GMT)