summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2012-05-23Merge branch 'sbp-target-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull sbp-2 (firewire) target mode support from Nicholas Bellinger: "The FireWire SBP-2 Target is a driver for using an IEEE-1394 connection as a SCSI transport. This module uses the SCSI Target framework to expose LUNs to other machines attached to a FireWire bus, in effect acting as a FireWire hard disk similar to FireWire Target Disk mode on many Apple computers. Also included are the two drivers/firewire/ patches required by sbp-target to access fw_request fabric speed needed for mgt_agent TCODE_WRITE_BLOCK_REQUEST ops, and exporting fw_card kref logic used when creating/destroying active session references to individual endpoints. A credit goes to Chris in being able to get this code up and running so quickly w/o any target core changes, and special thanks goes out to Stefan Richter + Clemens Ladisch + Andy Grover for their help in getting this driver ready for mainline. Also, one of Chris's goals was to be able to connect sbp-target to a PowerPC based MacOS-X based client, that he accomplished along the way in this obligatory screenshot: http://linux-iscsi.org/wiki/File:Linux-fireware-target-bootc-macosx.png Great work Chris + linux-1394 team !!" Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> * 'sbp-target-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: sbp-target: Initial merge of firewire/ieee-1394 target mode support firewire: Move fw_card kref functions into linux/firewire.h firewire: Add function to get speed from opaque struct fw_request
2012-05-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull scsi-target changes from Nicholas Bellinger: "There has been lots of work in existing code in a number of areas this past cycle. The major highlights have been: * Removal of transport_do_task_sg_chain() from core + fabrics (Roland) * target-core: Removal of se_task abstraction from target-core and enforce hw_max_sectors for pSCSI backends (hch) * Re-factoring of iscsi-target tx immediate/response queues (agrover) * Conversion of iscsi-target back to using target core memory allocation logic (agrover) We've had one last minute iscsi-target patch go into for-next to address a nasty regression bug related to the target core allocation logic conversion from agrover that is not included in friday's linux-next build, but has been included in this series. On the new fabric module code front for-3.5, here is a brief status update for the three currently in flight this round: * usb-gadget target driver: Sebastian Siewior's driver for supporting usb-gadget target mode operation. This will be going out as a separate PULL request from target-pending/usb-target-merge with subsystem maintainer ACKs. There is one minor target-core patch in this series required to function. * sbp ieee-1394/firewire target driver: Chris Boot's driver for supportting the Serial Block Protocol (SBP) across IEEE-1394 Firewire hardware. This will be going out as a separate PULL request from target-pending/sbp-target-merge with two additional drivers/firewire/ patches w/ subsystem maintainer ACKs. * qla2xxx LLD target mode infrastructure changes + tcm_qla2xxx: The Qlogic >= 24xx series HW target mode LLD infrastructure patch-set and tcm_qla2xxx fabric driver. Support for FC target mode using qla2xxx LLD code has been officially submitted by Qlogic to James below, and is currently outstanding but not yet merged into scsi.git/for-next.. [PATCH 00/22] qla2xxx: Updates for scsi "misc" branch http://www.spinics.net/lists/linux-scsi/msg59350.html Note there are *zero* direct dependencies upon this for-next series for the qla2xxx LLD target + tcm_qla2xxx patches submitted above, and over the last days the target mode team has been tracking down an tcm_qla2xxx specific active I/O shutdown bug that appears to now be almost squashed for 3.5-rc-fixes." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (47 commits) iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs iscsi-target: remove dead code in iscsi_check_valuelist_for_support target: Handle ATA_16 passthrough for pSCSI backend devices target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits target: add support for the WRITE_VERIFY command target: make target_put_session void target: cleanup transport_execute_tasks() target: Remove max_sectors device attribute for modern se_task less code target: lock => unlock typo in transport_lun_wait_for_tasks target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB target: remove the t_se_count field in struct se_cmd target: remove the t_task_cdbs_ex_left field in struct se_cmd target: remove the t_task_cdbs_left field in struct se_cmd target: remove struct se_task target: move the state and execute lists to the command target: simplify command to task linkage target: always allocate a single task target: replace ->execute_task with ->execute_cmd target: remove the task_sectors field in struct se_task ...
2012-05-21iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecsNicholas Bellinger
This patch fixes a bug in iscsit_allocate_iovecs() where iov_count was incorrectly calculated using min(1UL, data_length / PAGE_SIZE) instead of max(1UL, data_length / PAGE_SIZE), that ends up triggering an OOPs for large block I/O when the SGL <-> iovec mapping exceeds the bogus iov_count allocation size. This is a regression introduced during the iscsi-target conversion back to using core memory allocation here: commit bfb79eac2026b411df9e253a9c350039b4b04bb7 Author: Andy Grover <agrover@redhat.com> Date: Tue Apr 3 15:51:29 2012 -0700 target/iscsi: Go back to core allocating data buffer for cmd Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17iscsi-target: remove dead code in iscsi_check_valuelist_for_supportDan Carpenter
Neither "acceptor_values" nor "proposer_values" can be NULL here when scanning the value lists for incoming iSCSI login parameters such as HeaderDigest=CRC32C,None. Smatch complains because we are not allowed to pass NULL pointers to strchr(). Also I removed a second later check for "!acceptor_values" because it gets checked on the next line in the do while condition. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17target: Fix bug in handling of FILEIO + block_device resize opsNicholas Bellinger
This patch fixes a bug in the handling of FILEIO w/ underlying block_device resize operations where the original fd_dev->fd_dev_size was incorrectly being used in fd_get_blocks() for READ_CAPACITY response payloads. This patch avoids using fd_dev->fd_dev_size for FILEIO devices with an underlying block_device, and instead changes fd_get_blocks() to get the sector count directly from i_size_read() as recommended by hch. Reported-by: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17target: Handle ATA_16 passthrough for pSCSI backend devicesmengcong
The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs with a SATA CD-ROM. This patch adds support to it so that PSCSI CD-ROM passthrough works with the cdrecord. (nab: Add !passthrough check to prevent non pSCSI backends from ATA_16) Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attributeNicholas Bellinger
This patch adds support for ALUA MI_REPORT_TARGET_PGS extended header format defined within SPC-4. It changes target core ALUA emulation logic within target_emulate_report_target_port_groups() to support both the extended and original length only header formats. It includes adding a new 'implict_trans_secs' attribute for each ALUA target port group to control the value returned to the application client for an recommended implict translation timeout in seconds. By default this value is currently set to zero, and limited up to 255 by virtue of using a single byte in the extended header format. This value is used by target_emulate_report_target_port_groups() within the extended header logic to set IMPLICIT TRANSITION TIME as defined by spc4r30. Cc: Hannes Reinecke <hare@suse.de> Cc: Rob Evers <revers@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-17target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bitsNicholas Bellinger
This patch fixes the MAINTENANCE_IN service action type checks to only look at the proper lower 5 bits of cdb byte 1. This addresses the case where MI_REPORT_TARGET_PGS w/ extended header using the upper three bits of cdb byte 1 was not processed correctly in transport_generic_cmd_sequencer, as well as the three cases for standby, unavailable, and transition ALUA primary access state checks. Also add MAINTENANCE_IN to the excluded list in transport_generic_prepare_cdb() to prevent the PARAMETER DATA FORMAT bits from being cleared. Cc: Hannes Reinecke <hare@suse.de> Cc: Rob Evers <revers@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-15target: add support for the WRITE_VERIFY commandBernhard Kohl
Some legacy OS use WRITE_VERIFY on hard disks. Signed-off-by: Bernhard Kohl <bernhard.kohl@gmx.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-14target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setupsBernhard Kohl
This patch addresses a bug in a special case for target core SPC-2 RELEASE logic where the same physical client (eg: iSCSI InitiatorName) with differing iSCSI session identifiers (ISID) is allowed to incorrectly release the same client's SPC-2 reservation from the non reservation holding path. Note this bug is specific to iscsi-target w/ SPC-2 reservations, and with the default enforce_pr_isids=1 device attr setting in target-core controls if a InitiatorName + different ISID reservations are handled the same as a single iSCSI client entity. Signed-off-by: Bernhard Kohl <bernhard.kohl@gmx.net> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11target: make target_put_session voidJörn Engel
No real change, it effectively already was. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11target: cleanup transport_execute_tasks()Jörn Engel
The function is effectively void and doesn't need any goto logic. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-11target: Drop incorrect se_lun_acl release for dynamic -> explict ACL conversionNicholas Bellinger
This patch removes some potentially problematic legacy code within core_clear_initiator_node_from_tpg() that was originally intended to release left over se_lun_acl setup during dynamic NodeACL+MappedLUN generate when running with TPG demo-mode operation. Since we now only ever expect to allocate and release se_lun_acl from within target_core_fabric_configfs.c:target_fabric_make_mappedlun() and target_fabric_drop_mappedlun() context respectively, this code for demo-mode release is incorrect and needs to be removed. Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09sbp-target: Initial merge of firewire/ieee-1394 target mode supportChris Boot
The FireWire SBP-2 Target is a driver for using an IEEE-1394 connection as a SCSI transport. This module uses the SCSI Target framework to expose LUNs to other machines attached to a FireWire bus, in effect acting as a FireWire hard disk similar to FireWire Target Disk mode on many Apple computers. This commit contains the squashed pull from Chris Boot's SBP-2-Target: https://github.com/bootc/Linux-SBP-2-Target.git patch-v3 firewire-sbp-target: Add sbp_base.h header firewire-sbp-target: Add sbp_configfs.c firewire-sbp-target: Add sbp_fabric.{c,h} firewire-sbp-target: Add sbp_management_agent.{c,h} firewire-sbp-target: Add sbp_login.{c,h} firewire-sbp-target: Add sbp_target_agent.{c,h} firewire-sbp-target: Add sbp_scsi_cmnd.{c,h} firewire-sbp-target: Add to target Kconfig and Makefile Also add bootc's entry to the MAINTAINERS file. Great work Chris !! Signed-off-by: Chris Boot <bootc@bootc.net> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Andy Grover <agrover@redhat.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09target: Remove max_sectors device attribute for modern se_task less codeNicholas Bellinger
This patch removes the original usage of dev_attr->max_sectors in favor of dev_attr->hw_max_sectors that is now being enforced by target core from within transport_generic_cmd_sequencer() for SCF_SCSI_DATA_SG_IO_CDB ops. After the recent se_task removal patches from hch, this value for IBLOCK backends being set via configfs by userspace from an saved max_sectors value that is turning out to be problematic, so it makes sense to go ahead and remove this now legacy attribute all-together. This patch also continues to make se_dev_set_default_attribs() do (sectors / block_size) alignment for what actually get used by target_core_mod to be safe here, following the same alignment currently used by fabric_max_sectors. Reported-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09target: lock => unlock typo in transport_lun_wait_for_tasksDan Carpenter
target_stop_cmd() returns with the lock held and IRQs disabled. The intent was to unlock here. This bug was originally added with: commit cf572a9627c9ae86082216de109780c1d2e2ee28 Author: Christoph Hellwig <hch@infradead.org> Date: Tue Apr 24 00:25:05 2012 -0400 target: move the state and execute lists to the command Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-09target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDBNicholas Bellinger
Instead of depending upon a max_sectors value that may be set via configfs based upon original HW queue limitations, go ahead and convert to using the hw_max_sectors reported by the backend device in order to determine when to reject an I/O's who's sector count exceeds what is supported by the backend with a single se_cmd descriptor. It addresses a potential case where se_dev_attrib.max_sectors for IBLOCK backends has already been set via queue_max_sectors() to something small like max_sectors=32 (LVM, DRBD may do this), resulting typically sized SCF_SCSI_DATA_SG_IO_CDB to be incorrectly rejected with invalid_cdb_field in transport_generic_cmd_sequencer(). Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove the t_se_count field in struct se_cmdChristoph Hellwig
Now that tasks are gone we are guaranteed to only get a single completion per command, and thus don't need this counter. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove the t_task_cdbs_ex_left field in struct se_cmdChristoph Hellwig
Now that tasks are gone we are guaranteed to only get a single completion per command, and thus don't need this counter. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove the t_task_cdbs_left field in struct se_cmdChristoph Hellwig
Now that tasks are gone we are guaranteed to only get a single completion per command, and thus don't need this counter. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove struct se_taskChristoph Hellwig
We can use struct se_cmd for everything it did. Make sure to pass the S/G list and data direction to the execution function to ease adding back BIDI support later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: move the state and execute lists to the commandChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: simplify command to task linkageChristoph Hellwig
Now that we only have a single task per command we can use a direct pointer to it instead of list. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: always allocate a single taskChristoph Hellwig
Simply transport_generic_new_cmd to only allocate a single task. For normal unidirection commands nothing changes except that the code is a lot simpler now. Any BIDI support that used to work will stop now for the next few patches at least. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: replace ->execute_task with ->execute_cmdChristoph Hellwig
Make CDB emulation work on commands instead of tasks again as a preparation of removing tasks completely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove the task_sectors field in struct se_taskChristoph Hellwig
Remove the task_sectors field that isn't used anywhere. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove the task_size field in struct se_taskChristoph Hellwig
Now that we don't split commands the size field in the task is always equivalent to the one in the CDB, even in cases where we have two tasks due to a BIDI transfer. Just refer the the size in the command instead of duplicating it in the task. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove the task_lba field in struct se_taskChristoph Hellwig
Now that we don't split commands the lba field in the task is always equivalent to the one in the CDB, even in cases where we have two tasks due to a BIDI transfer. Just refer the the lba in the command instead of duplicating it in the task. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove target_get_task_cdbChristoph Hellwig
Now that tasks are always the same size as the command there is no need to rewrite a CDB in common code. Notw that we keep the separately allocated CDB in the pscsi and stgt backends for now, to easy reintroducing any command splitting local to these backends if nessecary. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: remove the unused transport_limit_task_sectors helperChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: Handle GET_EVENT_STATUS_NOTIFICATION passthroughStefan Hajnoczi
The SCSI MMC GET_EVENT_STATUS_NOTIFICATION command can be used to find out about media change, among other things. This patch adds it to the command sequencer so that PSCSI CD-ROM passthrough works with modern Linux guests that issue this command. Tested-by: Cong Meng <mengcong@cn.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target/iscsi: cleanup some allocation style issuesDan Carpenter
We can use kcalloc() here instead of kzalloc(). It's better style and it has overflow checking built in. Also -ENOMEM is the correct error code for allocation errors. -1 means -EPERM. None of the callers preserve the error codes so it doesn't matter except as a cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Go back to core allocating data buffer for cmdAndy Grover
We originally changed iscsi to allocate its own buffers just as an intermediate step to clean up some core buffer allocation mechanisms. Now we can put it back. Also had to change allocate_iovecs to use data_length instead of t_data_nents because iovecs are now allocated before the data buffer, thus t_data_nents is not yet initialized. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: Call core_alua_check_nonop_delay in target_submit_cmd()Andy Grover
It appears iscsi is the only one to call this in its cmd submit path, but it appears to be applicable to all fabrics, and should always be called. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Fold _decide_list_to_build into _build_pdu_and_seq_listsAndy Grover
Rename iscsit_build_pdu_and_seq_list to iscsit_do_build_pdu_and_seq_lists Rename iscsit_do_build_list to iscsit_build_pdu_and_seq_lists Move code from iscsit_decide_list_to_build into _seq_pdu_list.c, seems a better fit. Also update some comments in pdu/seq code for correctness and whitespace. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Eliminate iscsi_cmd.data_lengthAndy Grover
Redundant, just use iscsi_cmd->se_cmd.data_length once se_cmd is initialized, or hdr->data_length before then. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Move init_se_cmd closer to lookup_cmd_lunAndy Grover
if we can get calls to init_se_cmd, get_sess_cmd, lookup_cmd_lun, core_alua_check_nonop_delay, and handle_cdb_direct next to each other, then we can just call target_submit_cmd. This is a step towards that goal. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Inline iscsit_allocate_se_cmd and *_for_tmrAndy Grover
Trying to move a bunch of stuff around so iscsi can use target_submit_cmd someday, and so stuff needs to be in that function directly instead of hidden, so it can be reordered etc. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: rewrite comment for generic_new_cmdAndy Grover
Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: Rename target_allocate_tasks to target_setup_cmd_from_cdbAndy Grover
This patch renames a horribly misnamed function that no longer allocate tasks to something more descriptive for it's modern use in target core. (nab: Fix up ib_srpt to use this as well ahead of a target_submit_cmd conversion) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Misc cleanups from Agrover (round 2)Andy Grover
This patch includes the handful of squashed patches for target/iscsi from Andy's original series into lio-core/master code: *) Make iscsit_add_reject static *) Remove unused data_offset_end from iscsi_datain_req *) Remove "#if 0" stubs *) Rename iscsi_datain_req to cmd_datain_node *) Cleanups for built_r2ts_for_cmd() *) Cleanups for Cleanup build_sendtargets_response() Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Refactor target_tx_thread immediate+response queue loopsAndy Grover
Immediate queue: Consolidate down to one switch statement by moving send_tx_data and stuff from second switch into the first switch, or the functions the first switch calls. Response queue: Do not lock istate_lock except directly around i_state modifications. Put entire ISTATE_SEND_DATAIN path within first switch statement, in prep for further refactoring. All other cases set use_misc = 1 and will not be using sendpage, so just use send_tx_data for these and set use_misc param to 1. map_sg, sent_status, use_misc, and se_cmd vars no longer needed. Then put immediate and response handling in separate functions in order to get iscsi_target_tx_thread down to where it fits on a page. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Remove unneeded locking from iscsi_target_tx_threadAndy Grover
When processing immediate queue, we're switching on a local variable so it's not necessary to lock around it. However, we are modifying cmd->i_state in two spots, so lock around those parts only. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Misc cleanups from Agrover (round 1)Andy Grover
*) Use decoded cmd->immediate_cmd for conditional instead of re-examining hdr->opcode *) Make iscist_dataout_post_crc_passed more legible *) use max() to reduce code in build_r2ts_for_cmd() *) Remove CONFIG_SMP and if 0 ifdefs *) Replace if/goto with a while loop *) Remove unused conn->tx_immediate_queue and tx_response_queue Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target/iscsi: Rename iscsi_cmd.i_list to iscsi_cmd.i_conn_nodeAndy Grover
The name change makes it clear this list_head is so the cmd can be an item in the connection's conn_cmd_list. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: Remove transport_do_task_sg_chain() and associated detritusRoland Dreier
Now that all fabrics are converted over to using se_cmd->t_data_sg directly, we can drop the task sg chaining support. With the modern memory allocation in target core, task sg chaining is needless overhead -- we would split up the main cmd sglist into pieces, and then splice those pieces back together instead of just using the original list directly. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15tcm_fc: Remove use of transport_do_task_sg_chain()Roland Dreier
With the modern target core, se_cmd->t_data_sg already points to a sglist that covers the whole command. So task_sg chaining is needless overhead and obfuscation -- instead of splicing the split up task sglists back into one list, we can just use the original list directly. Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kiran Patil <Kiran.patil@intel.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: stop splitting commands into multiple tasksChristoph Hellwig
From hch: The high-performance backends (iblock and rd) support tasks of unlimited size. With that there is no reason to keep a complex infrastructure for splitting up commands in place. Stop doing so and only submit a single task per data direction. Once this is in place we can slowly remove fields from the task that duplicate things in the command, or move other fields into the command. From nab: The benefit to IBLOCK performance by removing the additional fast-path allocation overhead + SGL mapping to se_task->task_sg[] is now greater than transparently supporting an received CDB I/O length that exceeds what is allowed by backend pSCSI LLD hardware max_sectors, that was originally supported for all backend export cases. This change may effect some users of pSCSI users on legacy hardware, but I think most folks are now using TYPE_DISK struct scsi_device export with IBLOCK. The only other place where this may can issues that cannot be resolved with IBLOCK TYPE_DISK is using TYPE_ROM, TYPE_TAPE or other pSCSI non TYPE_DISK export with an SCSI LLDs using a smaller max_sectors. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: don't limit transfer sizes for the ramdisk backendChristoph Hellwig
The ramdisk backend has not inherent limitations for handling requests, so don't artificially limits the transfer size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-15target: misc ramdisk backend cleanupsChristoph Hellwig
Remove various leftovers of the old direct/indirect split, as well as the unused rd_request structure and a couple unused defines and fields. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>