summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2015-02-13Reset to 3.12.37Scott Wood
2014-03-22x86_pkg_temp_thermal: Do not expose as a hwmon deviceJean Delvare
commit 79786880a47a8c5b4c8146c03432b3387a07a169 upstream. The temperature value reported by x86_pkg_temp_thermal is already reported by the coretemp driver. So, do not expose this thermal zone as a hwmon device, because it would be redundant. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2013-10-21Merge branch 'x86_pkg_temp' of .git into for-rcZhang Rui
2013-10-21Revert "drivers: thermal: parent virtual hwmon with thermal zone"Zhang Rui
Commit b82715fdd4a5407f56853b24d387d484dd9c3b5b introduces a 'device' subdirectory under /sys/class/hwmon/hwmonX/ directory, for the thermal_zone hwmon devices. And this results in different handling by libsensors. The problem is reported and discussed in this thread http://marc.info/?l=linux-pm&m=138229306109596&w=2 This patch reverts commit b82715fdd4a5407f56853b24d387d484dd9c3b5b. Reported-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-10-15drivers: thermal: allow ti-soc-thermal run without pcb zoneEduardo Valentin
This patch changes the behavior of TI SoC thermal driver when there is a PCB thermal zone. Instead of reporting an error code when reading from PCB temperature sensor fails, this patch will make the driver attempt to compose the hotspot extrapolation based on bandgap readings only. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-10-15thermal: exynos: Provide initial setting for TMU's test MUX address at ↵Lukasz Majewski
Exynos4412 The commit d0a0ce3e77c795258d47f9163e92d5031d0c5221 ("thermal: exynos: Add missing definations and code cleanup") has removed setting of test MUX address value at TMU configuration setting. This field is not present on Exynos4210 and Exynos5 SoCs. However on Exynos4412 SoC it is required to set this field after reset because without it TMU shows maximal available temperature, which causes immediate platform shutdown. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-10-15thermal: exynos: Provide separate TMU data for Exynos4412Lukasz Majewski
Up till now Exynos5250 and Exynos4412 had the same definitions for TMU data. Following commit changes that, by introducing separate exynos4412_default_tmu_data structure. Since Exynos4412 was chronologically first, the corresponding name for TMU registers and default data was renamed. Additionally, new SOC_ARCH_EXYNOS4412 type has been defined. Moreover, the SOC_ARCH_EXYNOS name has been changed to SOC_ARCH_EXYNOS5250. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-10-15thermal: exynos: Remove check for thermal device pointer at ↵Lukasz Majewski
exynos_report_trigger() The commit 4de0bdaa9677d11406c9becb70c60887c957e1f0 ("thermal: exynos: Add support for instance based register/unregister") broke check for presence of therm_dev at global thermal zone in exynos_report_trigger(). The resulting wrong test prevents thermal_zone_device_update() call, which calls handlers for situation when trip points are passed. Such behavior prevents thermal driver from proper reaction (when TMU interrupt is raised) in a situation when overheating is detected at TMU hardware. It turns out, that after exynos thermal subsystem redesign (at v3.12) this check is not needed, since it is not possible to register thermal zone without valid thermal device. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-25Thermal: x86_pkg_temp: change spin lockSrinivas Pandruvada
x86_pkg_temp receives thermal notifications via a callback from a therm_throt driver, where thermal interrupts are processed. This callback is pkg_temp_thermal_platform_thermal_notify. Here to avoid multiple interrupts from cores in a package, we disable the source and also set a variable to avoid scheduling delayed work function. This variable is protected via spin_lock_irqsave. On one buggy platform, we still receiving interrupts even if the source is disabled. This can cause deadlock/lockdep warning, when interrupt is generated while under spinlock in work function. Change spin_lock to spin_lock_irqsave and spin_unlock to spin_unlock_irqrestore as the data it is trying to protect can also be modified in a notification call called from interrupt handler. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-09-03drivers: thermal: add check when unregistering cpu coolingEduardo Valentin
This patch avoids NULL pointer accesses while unregistering cpu cooling devices, in case a NULL pointer is received. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03thermal: thermal_core: allow binding with limits on bind_paramsEduardo Valentin
When registering a thermal zone device using platform information via bind_params, the thermal framework will always perform the cdev binding using the lowest and highest limits (THERMAL_NO_LIMIT). This patch changes the data structures so that it is possible to inform what are the desired limits for each trip point inside a bind_param. The way the binding is performed is also changed so that it uses the new data structure. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03drivers: thermal: make usage of CONFIG_THERMAL_HWMON optionalEduardo Valentin
When registering a new thermal_device, the thermal framework will always add a hwmon sysfs interface. This patch adds a flag to make this behavior optional. Now when registering a new thermal device, the caller can optionally inform if hwmon interface is desirable. This can be done by means of passing a thermal_zone_params.no_hwmon == true. In order to keep same behavior as of today, all current calls will by default create the hwmon interface. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Zhang Rui <rui.zhang@intel.com> Suggested-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03drivers: thermal: parent virtual hwmon with thermal zoneEduardo Valentin
When creating virtual hwmon devices based out of thermal zone devices, the virtual devices won't have parents. This patch changes the code so that the parent of virtual hwmon devices is the thermal zone device that they are based of. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03thermal: hwmon: move hwmon support to single fileEduardo Valentin
In order to improve code organization, this patch moves the hwmon sysfs support to a file named thermal_hwmon. This helps to add extra support for hwmon without scrambling the code. In order to do this move, the hwmon list head is now using its own locking. Before, the list used the global thermal locking. Also, some minor changes in the code were required, as recommended by checkpatch.pl. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: exynos: Clean up non-DT remnantsSachin Kamat
Commit 1cd1ecb6 ("thermal: exynos: Remove non DT based support") cleaned up some non-DT code. However, there were few more things needed for complete cleanup to make this driver DT only. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: exynos: Fix potential NULL pointer dereferenceSachin Kamat
NULL pointer was being dereferenced in its own error message. Changed it to the correct device pointer. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: exynos: Fix typos in KconfigSachin Kamat
Fixes some trivial typos. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: ti-soc-thermal: Ensure to compute thermal trendRanganath Krishnan
Workaround to compute thermal trend even when update interval is not set. This patch will ensure to compute the thermal trend when bandgap counter delay is not set. Signed-off-by: Ranganath Krishnan <ranganath@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: ti-soc-thermal: Set the bandgap mask counter delay valueRanganath Krishnan
Set the bandgap mask counter_delay with the polling_delay value on registering the thermal zone. This patch will ensure to get the correct update interval for computing the thermal trend. Signed-off-by: Ranganath Krishnan <ranganath@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: ti-soc-thermal: Initialize counter_delay field for TI DRA752 sensorsRanganath Krishnan
Initialize MPU, GPU, CORE, DSPEVE and IVA thermal sensors of DRA752 bandgap with the counter delay mask. Signed-off-by: Ranganath Krishnan <ranganath@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-15Merge branch 'fixes' of .git into nextZhang Rui
2013-08-15thermal: step_wise: return instance->target by defaultEduardo Valentin
In case the trend is not changing or when there is no request for throttling, it is expected that the instance would not change its requested target. This patch improves the code implementation to cover for this expected behavior. With current implementation, the instance will always reset to cdev.cur_state, even in not expected cases, like those mentioned above. This patch changes the step_wise governor implementation of get_target so that we accomplish: (a) - default value will be current instance->target, so we do not change the thermal instance target unnecessarily. (b) - the code now it is clear about what is the intention. There is a clear statement of what are the expected outcomes (c) - removal of hardcoded constants, now it is put in use the THERMAL_NO_TARGET macro. (d) - variable names are also improved so that reader can clearly understand the difference between instance cur target, next target and cdev cur_state. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by: Ruslan Ruslichenko <ruslan.ruslichenko@ti.com> Signed-of-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: step_wise: cdev only needs update on a new target stateShawn Guo
The cooling device only needs update on a new target state. Since we already check old target in thermal_zone_trip_update(), we can do one more check to see if it's a new target state. If not, we can reasonably save some uncecesary code execution. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15Merge branches 'exynos', 'imx' and 'fixes' of .git into nextZhang Rui
2013-08-15Thermal/cpu_cooling: Return directly for the cpu out of allowed_cpus in the ↵Lan Tianyu
cpufreq_thermal_notifier() cpufreq_thermal_notifier() is to change the cpu's cpufreq in the allowed_cpus mask when associated thermal-cpufreq cdev's cooling state is changed. It's a cpufreq policy notifier handler and it will be triggered even if those cpus out of allowed_cpus has changed freq policy. cpufreq_thermal_notifier() checks the policy->cpu. If it belongs to allowed_cpus, change max_freq(default to 0) to the desire cpufreq value and pass 0 and max_freq to cpufreq_verify_within_limits() as cpufreq scope. But if not, do nothing and max_freq will remain 0. This will cause the cpufreq scope to become 0~0. This is not right. This patch is to return directly after finding cpu not belonging to allowed_cpus. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: exynos_tmu: fix wrong error check for mapped memoryNaveen Krishna Chatradhi
The error check is checking for a "base" mapped memory base instead of "base_common". Fixing the same. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: imx: implement thermal alarm interrupt handlingPhilipp Zabel
Enable automatic measurements at 10 Hz and use the alarm interrupt to react more quickly to sudden temperature changes above the passive or critical temperature trip points. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: imx: dynamic passive and SoC specific critical trip pointsPhilipp Zabel
Set passive and critical trip point values depending on the maximum die temperature stored in the OCOTP fuses. This allows higher trip points for industrial and automotive rated i.MX6 SoCs. Also allow to configure the passive trip point from userspace. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-13thermal: exynos: Support for TMU regulator defined at device treeAmit Daniel Kachhap
TMU probe function now checks for a device tree defined regulator. For compatibility reasons it is allowed to probe driver even without this regulator defined. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add hardware mode thermal calibration supportAmit Daniel Kachhap
This patch adds support for h/w mode calibration in the TMU controller. Soc's like 5440 support this features. The h/w bits needed for calibration setting are same as that of enum calibration_type. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Fix to set the second point correction valueAmit Daniel Kachhap
This patch sets the second point trimming value according to the platform data if the register value is 0. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add thermal configuration data for exynos5440 TMU sensorAmit Daniel Kachhap
This patch adds configuration data for exynos5440 soc. Also register definations for the controller are added. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add driver support for exynos5440 TMU sensorAmit Daniel Kachhap
This patch modifies TMU controller to add changes needed to work with exynos5440 platform. This sensor registers 3 instance of the tmu controller with the thermal zone and hence reports 3 temperature output. This controller supports upto five trip points. For critical threshold the driver uses the core driver thermal framework for shutdown. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add support to access common register for multistanceAmit Daniel Kachhap
This patch adds support to parse one more common set of TMU register. First set of register belongs to each instance of TMU and second set belongs to common TMU registers. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: use device resource management infrastructureAmit Daniel Kachhap
This patch uses the device pointer stored in the configuration structure and converts to dev_* prints and devm API's. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add TMU features to check instead of using SOC typeAmit Daniel Kachhap
This patch adds several features supported by TMU as bitfields. This features varies across different SOC type and comparing the features present in the TMU is more logical than comparing the soc itself. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add support to handle many instances of TMUAmit Daniel Kachhap
This patch adds support to handle multiple instances of the TMU controllers. This is done by removing the static structure to register with the core thermal and creating it dynamically for each instance of the TMU controller. The interrupt is made shared type to handle shared interrupts. Now since the ISR needs the core thermal framework to be registered so request_irq is moved after the core registration is done. Also the identifier of the TMU controller is extracted from device tree alias. This will be used for TMU specific initialisation. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Remove non DT based supportAmit Daniel Kachhap
Recently non DT support from Exynos platform is removed and hence removing non DT support from the driver also. This will help in easy maintainence. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Make the zone handling use trip informationAmit Daniel Kachhap
This code simplifies the zone handling to use the trip information passed by the TMU driver and not the hardcoded macros. This also helps in adding more zone support. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Return success even if no cooling data suppliedAmit Daniel Kachhap
This patch removes the error return in the bind/unbind routine as the platform may not register any cpufreq cooling data. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Modify private_data to appropriate name driver_dataAmit Daniel Kachhap
This patch renames member private_data to driver_data of the thermal zone registration structure as this item stores the driver related data and uses it to call the driver related callbacks. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add support for instance based register/unregisterAmit Daniel Kachhap
This code modifies the thermal driver to have multiple thermal zone support by replacing the global thermal zone variable with device data member of thermal_zone_device. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Fix to clear only the generated interruptsAmit Daniel Kachhap
This patch uses the TMU status register to know the generated interrupts and only clear them in the interrupt handler. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Support thermal trippingAmit Daniel Kachhap
TMU urgently sends active-high signal (thermal trip) to PMU, and thermal tripping by hardware logic. Thermal tripping means that PMU cuts off the whole power of SoC by controlling external voltage regulator. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Move register definitions from driver to data fileAmit Daniel Kachhap
This patch migrates the TMU register definition/bitfields to data file. This is needed to support SoC's which use the same TMU controller but register validity, offsets or bitfield may slightly vary across SOC's. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add extra entries in the tmu platform dataAmit Daniel Kachhap
This patch adds entries min_efuse_value, max_efuse_value, default_temp_offset, trigger_type, cal_type, trim_first_point, trim_second_point, max_trigger_level trigger_enable in the TMU platform data structure. Also the driver is modified to use the data passed by these new platform memebers instead of the constant macros. All these changes helps in separating the SOC specific data part from the TMU driver. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add missing definations and code cleanupAmit Daniel Kachhap
This patch adds some extra register bitfield definations and cleans up the code to prepare for moving register macros and definations inside the TMU data section. In this code cleanup the TMU enable bit is correctly used as bit0 and bit1 is taken care which is reserve bit. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Bifurcate exynos tmu driver and configuration dataAmit Daniel Kachhap
This code splits the exynos tmu driver code into SOC specific data parts. This will simplify adding new SOC specific data to the same TMU controller. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Move exynos_thermal.h from include/* to driver/* folderAmit Daniel Kachhap
This patch renames and moves include/linux/platform_data/exynos_thermal.h to drivers/thermal/samsung/exynos_tmu.h. This file movement is needed as exynos SOC's are not supporting non-DT based platforms and this file now just contains exynos tmu driver related definations. Also struct freq_clip_table is now moved to exynos_thermal_common.c as it fixes the compilation issue occuring because now this new tmu header file is included in tmu driver c file and not in the common thermal header file. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Rename exynos_thermal.c to exynos_tmu.cAmit Daniel Kachhap
This patch renames exynos_thermal.c to exynos_tmu.c. This change is needed as this file now just contains exynos tmu driver related codes and thermal zone or cpufreq cooling registration related changes are not there anymore. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>