summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2012-06-20Merge tag 'tty-3.5-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg Kroah-Hartman: "Here are 3 patches resolving a boot regression (the mop500 fix), a build warning fix, and a kernel-doc fix. All tiny, but should go into the final 3.5 release. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial/amba-pl011: move custom pin control to driver serial: fix serial_txx9.c build warning/typo serial: fix kernel-doc warnings in 8250.c
2012-06-16Merge tag 'stable/for-linus-3.5-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull five Xen bug-fixes from Konrad Rzeszutek Wilk: - When booting as PVHVM we would try to use PV console - but would not validate the parameters causing us to crash during restore b/c we re-use the wrong event channel. - When booting on machines with SR-IOV PCI bridge we didn't check for the bridge and tried to use it. - Under AMD machines would advertise the APERFMPERF resulting in needless amount of MSRs from the guest. - A global value (xen_released_pages) was not subtracted at bootup when pages were added back in. This resulted in the balloon worker having the wrong account of how many pages were truly released. - Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback. * tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: mark local pages as FOREIGN in the m2p_override xen/setup: filter APERFMPERF cpuid feature out xen/balloon: Subtract from xen_released_pages the count that is populated. xen/pci: Check for PCI bridge before using it. xen/events: Add WARN_ON when quick lookup found invalid type. xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness. xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN xen/hvc: Collapse error logic.
2012-06-13Merge branches 'sh/urgent', 'sh/core', 'sh/clockevents', 'sh/asm-generic' ↵Paul Mundt
and 'sh/trivial' into sh-fixes-for-linus
2012-06-13serial: sh-sci: Make probe fail for ports that exceed the maximum countLaurent Pinchart
The driver supports a maximum number of ports configurable at compile time. Make sure the probe() method fails when registering a port that exceeds the maximum instead of returning success without registering the port. This fixes a crash at system suspend time, when the driver tried to suspend a non-registered port using the UART core. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-13serial: sh-sci: Fix probe error pathsLaurent Pinchart
When probing fails, the driver must not try to cleanup resources that have not been initialized. Fix this. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-12serial/amba-pl011: move custom pin control to driverLinus Walleij
We had a boot regression in Ux500 in the merge window because two orthogonal pin control schemes for the PL011 were merged at the same time: - One using the .init() and .exit() hooks into the platform for Ux500 putting the pins into default vs sleep state respectively as the port was started/stopped. commit a09806607fd20bed2f8c41fe22793386790a14aa "ARM: ux500: switch to using pinctrl for uart0" - One hogging the default setting at PL011 probe() commit 258e055111d3cde2607e0d04eb91da2f7a59b591 "serial: amba-pl011: adopt pinctrl support" To get a solution that works for both let's scrap the stuff in the platform callbacks, instead have the driver itself select default and sleep states when the port is started/stopped. Hopefully this works for all clients. Platform callbacks are bad for device tree migration anyway, so this rids us of another problem in Ux500. Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12serial: fix serial_txx9.c build warning/typoRandy Dunlap
Fix kconfig symbol test to use "defined": drivers/tty/serial/serial_txx9.c: warning: "CONFIG_CONSOLE_POLL" is not defined [-Wundef] Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12serial: fix kernel-doc warnings in 8250.cRandy Dunlap
Fix kernel-doc warnings in drivers/tty/serial/8250/8250.c: Warning(drivers/tty/serial/8250/8250.c:3128): No description found for parameter 'up' Warning(drivers/tty/serial/8250/8250.c:3128): Excess function parameter 'port' description in 'serial8250_register_8250_port' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-02tty: Revert the tty locking series, it needs more workLinus Torvalds
This reverts the tty layer change to use per-tty locking, because it's not correct yet, and fixing it will require some more deep surgery. The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but there are several smaller commits that built upon it, they also get reverted here. The list of reverted commits is: fde86d310886 - tty: add lockdep annotations 8f6576ad476b - tty: fix ldisc lock inversion trace d3ca8b64b97e - pty: Fix lock inversion b1d679afd766 - tty: drop the pty lock during hangup abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock() fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef39be4 - tty_lock: Localise the lock The revert had a trivial conflict in the 68360serial.c staging driver that got removed in the meantime. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31tty: add lockdep annotationsEric Dumazet
tty_lock_pair() do the right thing to avoid deadlocks, but should instruct LOCKDEP of this to avoid a splat. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
2012-05-29tty: fix ldisc lock inversion traceAlan Cox
This is caused by tty_release using tty_lock_pair to lock both sides of the pty/tty pair, and then tty_ldisc_release dropping and relocking one side only. We can drop both fine, so drop both to avoid any lock ordering concerns. Rework the release path to fix the new locking model. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29pty: Fix lock inversionAlan Cox
The ptmx_open path takes the tty and devpts locks in the wrong order because tty_init_dev locks and returns a locked tty. As far as I can tell this is actually safe anyway because the tty being returned is new so nobody can get a reference to lock it at this point. However we don't even need the devpts lock at this point, it's only held as a byproduct of the way the locks were pushe down. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-26Merge branches 'fixes-for-linus', 'generic', 'cavium', 'module.h-fixes', ↵Ralf Baechle
'next/ath79' and 'next/lantiq' into mips-for-linux-next
2012-05-24xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness.Konrad Rzeszutek Wilk
We need to make sure that those parameters are setup to be correct. As such the value of 0 is deemed invalid and we find that we bail out. The hypervisor sets by default all of them to be zero and when the hypercall is done does a simple: a.value = d->arch.hvm_domain.params[a.index]; Which means that if the Xen toolstack forgot to setup the proper HVM_PARAM_CONSOLE_EVTCHN (or the PFN one), we would get the default value of 0 and use that. CC: stable@kernel.org Fixes-Oracle-Bug: 14091238 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-24xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFNKonrad Rzeszutek Wilk
We weren't resetting the parameter to be passed in to a known default. Nor were we checking the return value of hvm_get_parameter. CC: stable@kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-24xen/hvc: Collapse error logic.Konrad Rzeszutek Wilk
All of the error paths are doing the same logic. In which case we might as well collapse them in one path. CC: stable@kernel.org Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-24Merge branch 'delete-mca' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull the MCA deletion branch from Paul Gortmaker: "It was good that we could support MCA machines back in the day, but realistically, nobody is using them anymore. They were mostly limited to 386-sx 16MHz CPU and some 486 class machines and never more than 64MB of RAM. Even the enthusiast hobbyist community seems to have dried up close to ten years ago, based on what you can find searching various websites dedicated to the relatively short lived hardware. So lets remove the support relating to CONFIG_MCA. There is no point carrying this forward, wasting cycles doing routine maintenance on it; wasting allyesconfig build time on validating it, wasting I/O on git grep'ping over it, and so on." Let's see if anybody screams. It generally has compiled, and James Bottomley pointed out that there was a MCA extension from NCR that allowed for up to 4GB of memory and PPro-class machines. So in *theory* there may be users out there. But even James (technically listed as a maintainer) doesn't actually have a system, and while Alan Cox claims to have a machine in his cellar that he offered to anybody who wants to take it off his hands, he didn't argue for keeping MCA support either. So we could bring it back. But somebody had better speak up and talk about how they have actually been using said MCA hardware with modern kernels for us to do that. And David already took the patch to delete all the networking driver code (commit a5e371f61ad3: "drivers/net: delete all code/drivers depending on CONFIG_MCA"). * 'delete-mca' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: MCA: delete all remaining traces of microchannel bus support. scsi: delete the MCA specific drivers and driver code serial: delete the MCA specific 8250 support. arm: remove ability to select CONFIG_MCA
2012-05-23Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: "This tree includes assorted platform driver updates and a preparatory series for a platform with custom DMA remapping semantics (sta2x11 I/O hub)." * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vsmp: Fix number of CPUs when vsmp is disabled keyboard: Use BIOS Keyboard variable to set Numlock x86/olpc/xo1/sci: Report RTC wakeup events x86/olpc/xo1/sci: Produce wakeup events for buttons and switches x86, platform: Initial support for sta2x11 I/O hub x86: Introduce CONFIG_X86_DMA_REMAP x86-32: Introduce CONFIG_X86_DEV_DMA_OPS
2012-05-23Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH updates from Paul Mundt: - New CPUs: SH7734 (SH-4A), SH7264 and SH7269 (SH-2A) - New boards: RSK2+SH7264, RSK2+SH7269 - Unbreaking kgdb for SMP - Consolidation of _32/_64 page fault handling. - watchdog and legacy DMA chainsawing, part 1 - Conversion to evt2irq() hwirq lookup, to support relocation of vectored IRQs for irqdomains. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (98 commits) sh: intc: Kill off special reservation interface. sh: Enable PIO API for hp6xx and se770x. sh: Kill off machvec IRQ hinting. sh: dma: More legacy cpu dma chainsawing. sh: Kill off MAX_DMA_ADDRESS leftovers. sh: Tidy up some of the cpu legacy dma header mess. sh: Move sh4a dma header from cpu-sh4 to cpu-sh4a. sh64: Fix up vmalloc fault range check. Revert "sh: Ensure fixmap and store queue space can co-exist." serial: sh-sci: Fix for port types without BRI interrupts. sh: legacy PCI evt2irq migration. sh: cpu dma evt2irq migration. sh: sh7763rdp evt2irq migration. sh: sdk7780 evt2irq migration. sh: migor evt2irq migration. sh: landisk evt2irq migration. sh: kfr2r09 evt2irq migration. sh: ecovec24 evt2irq migration. sh: ap325rxa evt2irq migration. sh: urquell evt2irq migration. ...
2012-05-22Merge tag 'tty-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY updates from Greg Kroah-Hartman: "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge window. Nothing major in here, just lots of incremental changes from Alan and Jiri reworking some tty core things to behave better and to get a more solid grasp on some of the nasty tty locking issues. There are a few tty and serial driver updates in here as well. All of this has been in the linux-next releases for a while with no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits) serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller. serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width. serial: bfin_uart: narrow the reboot condition in DMA tx interrupt serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller. Revert "serial_core: Update buffer overrun statistics." tty: hvc_xen: NULL dereference on allocation failure tty: Fix LED error return tty: Allow uart_register/unregister/register tty: move global ldisc idle waitqueue to the individual ldisc serial8250-em: Add DT support serial8250-em: clk_get() IS_ERR() error handling fix serial_core: Update buffer overrun statistics. tty: drop the pty lock during hangup cris: fix missing tty arg in wait_event_interruptible_tty call tty/amiserial: Add missing argument for tty_unlock() tty_lock: Localise the lock pty: Lock the devpts bits privately tty_lock: undo the old tty_lock use on the ctty serial8250-em: Emma Mobile UART driver V2 Add missing call to uart_update_timeout() ...
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
2012-05-21hvc_xen: NULL dereference on allocation failureDan Carpenter
If kzalloc() returns a NULL here, we pass a NULL to xencons_disconnect_backend() which will cause an Oops. Also I removed the __GFP_ZERO while I was at it since kzalloc() implies __GFP_ZERO. CC: stable@kernel.org Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-21SERIAL: MIPS: lantiq: implement OF supportJohn Crispin
Add devicetree and handling for our new clkdev clocks. The patch is rather straightforward. .of_match_table is set and the 3 irqs are now loaded from the devicetree. This series converts the lantiq target to clkdev amongst other things. The driver needs to handle two clocks now. The fpi bus clock used to derive the divider and the clock gate needed on some socs to make the secondary port work. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Cox <alan@linux.intel.com> Cc: linux-serial@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3809/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-18serial: sh-sci: Fix for port types without BRI interrupts.Paul Mundt
In doing the evt2irq() + muxed vector conversion for various port types it became apparent that some of the legacy port types will presently error out due to the irq requesting logic attempting to acquire the non-existent BRI IRQ. This adds some sanity checks to the request/free path to ensure that non-existence of a source in itself is not an error. This should restore functionality for legacy PORT_SCI ports. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18Merge branch 'sh/evt2irq-migration' into sh-latestPaul Mundt
Conflicts: arch/sh/kernel/cpu/sh3/setup-sh770x.c arch/sh/kernel/cpu/sh3/setup-sh7710.c arch/sh/kernel/cpu/sh3/setup-sh7720.c arch/sh/kernel/cpu/sh4/setup-sh7750.c arch/sh/kernel/cpu/sh4a/setup-sh7343.c arch/sh/kernel/cpu/sh4a/setup-sh7366.c arch/sh/kernel/cpu/sh4a/setup-sh7722.c arch/sh/kernel/cpu/sh4a/setup-sh7723.c arch/sh/kernel/cpu/sh4a/setup-sh7724.c arch/sh/kernel/cpu/sh4a/setup-sh7757.c arch/sh/kernel/cpu/sh4a/setup-sh7763.c arch/sh/kernel/cpu/sh4a/setup-sh7770.c arch/sh/kernel/cpu/sh4a/setup-sh7785.c arch/sh/kernel/cpu/sh4a/setup-sh7786.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-17serial: delete the MCA specific 8250 support.Paul Gortmaker
The support for CONFIG_MCA is being removed, since the 20 year old hardware simply isn't capable of meeting today's software demands on CPU and memory resources. This commit removes the MCA specific 8250 UART code. Cc: Alan Cox <alan@linux.intel.com> Cc: linux-serial@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-05-17serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style ↵Sonic Zhang
controller. Simplify serial data width calculation and adapt to bf609 LCR bit mask. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width.Sonic Zhang
Change hardware flow control code to adapt to both bf5xx and bf60x. Disabled serial device before set termios for bf60x. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17serial: bfin_uart: narrow the reboot condition in DMA tx interruptSonic Zhang
Check if xmit buffer pointers are set to zero. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller.Sonic Zhang
The serial4 controller on bf60x is an enhanced version of serial controller on bf5xx. MMR size is 32 bits other than 16 bits. MMR GCTL, MCR and LCR are combined into one control MMR. MSR and LSR are combined into one status MMR. This patch adapts current bf5xx serial driver to serial4 controller on bf60x. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-15Revert "serial_core: Update buffer overrun statistics."Greg Kroah-Hartman
This reverts commit 642180871bc91afebb6ccf40d1615a7dd33699a3. Buffer overruns are for hardware reported overruns, not software ones, which will only happen if we run out of memory and you will get lots of -ENOMEM errors at the same time. Thanks to Alan Cox for catching this. Reported-by: Alan Cox <alan@linux.intel.com> Cc: Corbin Atkinson <corbinat@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-15SERIAL: MIPS Swarm sb1250-duart.c driver needs module.hPaul Gortmaker
This driver is a module and needs module.h, otherwise it will break when we remove a bogus usage of module.h from one of the other MIPS headers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3447/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-15SERIAL: MIPS DECstation zs.c driver needs module.hPaul Gortmaker
This driver is a module and needs module.h, otherwise it will break when we remove a bogus usage of module.h from one of the other MIPS headers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3446/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-15tty: hvc_xen: NULL dereference on allocation failureDan Carpenter
If kzalloc() returns a NULL here, we pass a NULL to xencons_disconnect_backend() which will cause an Oops. Also I removed the __GFP_ZERO while I was at it since kzalloc() implies __GFP_ZERO. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14tty: Fix LED error returnAlan Cox
3.4-rc introduced a regression when setting the LEDS. We do the right thing but then return an error code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43144 Reported-by: Christian Casteyde Signed-off-by: Alan Cox <alan@linux/intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-14tty: Fix LED error returnAlan Cox
3.4-rc introduced a regression when setting the LEDS. We do the right thing but then return an error code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43144 Reported-by: Christian Casteyde Signed-off-by: Alan Cox <alan@linux/intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14tty: Allow uart_register/unregister/registerAlan Cox
This is legitimate but because we don't clear the drv->state pointer in the unregister code causes a bogus BUG(). Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42880 Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14Merge branches 'spear/clock' and 'imx/clock' into next/clockArnd Bergmann
Updated to resolve dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-14Merge branch 'imx/pinctrl' into imx/clockArnd Bergmann
Conflicts: drivers/mmc/host/sdhci-esdhc-imx.c drivers/net/ethernet/freescale/fec.c drivers/spi/spi-imx.c drivers/tty/serial/imx.c This resolves dependencies between the pinctrl and clock changes in imx. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12serial: mxs-auart: adopt pinctrl supportShawn Guo
Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-05-12serial: amba-pl011: adopt pinctrl supportShawn Guo
Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-11Merge branch 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann
into next/clock Shawn Guo <shawn.guo@linaro.org> writes: mxs common clk porting for v3.5. It depends on the following two branches. [1] git://git.linaro.org/people/mturquette/linux.git clk-next [2] http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm.git clkdev As the mxs device tree conversion will constantly touch clock files, to save the conflicts, the updated mxs/dt branch coming later will based on this pull-request. * 'clk/mxs' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: remove now unused timer_clk argument from mxs_timer_init ARM: mxs: remove old clock support ARM: mxs: switch to common clk framework ARM: mxs: change the lookup name for fec phy clock ARM: mxs: request clock for timer clk: mxs: add clock support for imx28 clk: mxs: add clock support for imx23 clk: mxs: add mxs specific clocks Includes an update to Linux 3.4-rc6 Conflicts: drivers/clk/Makefile Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11Merge branch 'clps711x/cleanup' into next/cleanupArnd Bergmann
A single patch from Alexander Shiyan <shc_work@mail.ru>: * clps711x/cleanup: ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11ARM: clps711x: Using a single definition for the PHYS and VIRT registers offsetAlexander Shiyan
Using a single definition for the physical and virtual address register for all variants boards clps711x. This patch also includes the use of a single function clps_read/write in some units. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11tty: serial: imx: adopt pinctrl supportShawn Guo
Cc: linux-serial@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-05-10tty: move global ldisc idle waitqueue to the individual ldiscIvo Sieben
The global wait_queue that is used for line discipline idle handling is moved to a separate wait_queue for each line instance. This prevents unnecessary blocking on one line, because of idle handling on another line. Signed-off-by: Ivo Sieben <meltedpianoman@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-10Merge branch 'sh/rsk-updates' into sh-latestPaul Mundt
Conflicts: arch/sh/Kconfig Signed-off-by: Paul Mundt <lethal@linux-sh.org>