summaryrefslogtreecommitdiff
path: root/drivers/usb/host/pci-quirks.h
AgeCommit message (Collapse)Author
2013-10-03usb: ohci: use amd_chipset_type to filter for SB800 prefetchHuang Rui
Commit "usb: pci-quirks: refactor AMD quirk to abstract AMD chipset types" introduced a new AMD chipset type to filter AMD platforms with different chipsets. According to a recent thread [1], this patch updates SB800 prefetch routine in AMD PLL quirk. And make it use the new chipset type to represent SB800 generation. [1] http://marc.info/?l=linux-usb&m=138012321616452&w=2 Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03usb: ehci: use amd_chipset_type to filter for usb subsystem hang bugHuang Rui
Commit "usb: pci-quirks: refactor AMD quirk to abstract AMD chipset types" introduced a new AMD chipset type to filter AMD platforms with different chipsets. According to a recent thread [1], this patch updates USB subsystem hang symptom quirk which is observed on AMD all SB600 and SB700 revision 0x3a/0x3b. And make it use the new chipset type to represent. [1] http://marc.info/?l=linux-usb&m=138012321616452&w=2 Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29Merge 3.11-rc3 into usb-nextGreg Kroah-Hartman
2013-07-25usb: fix build warning in pci-quirks.h when CONFIG_PCI is not enabledRandy Dunlap
Fix warning when CONFIG_PCI is not enabled (from commit 296365781903226a3fb8758901eaeec09d2798e4). drivers/usb/host/pci-quirks.h: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-07-23Intel xhci: refactor EHCI/xHCI port switchingMathias Nyman
Make the Linux xHCI driver automatically try to switchover the EHCI ports to xHCI when an Intel xHCI host is detected, and it also finds an Intel EHCI host. This means we will no longer have to add Intel xHCI hosts to a quirks list when the PCI device IDs change. Simply continuing to add new Intel xHCI PCI device IDs to the quirks list is not sustainable. During suspend ports may be swicthed back to EHCI by BIOS and not properly restored to xHCI at resume. Previously both EHCI and xHCI resume functions switched ports back to XHCI, but it's enough to do it in xHCI only because the hub driver doesn't start running again until after both hosts are resumed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-05-30USB: OHCI: Generic changes to make ohci-pci a separate driverManjunath Goudar
Note that this changes is part of separating the ohci pci host controller driver from ohci-hcd host code. This contains : -Moved sb800_prefetch() function from ohci-pci.c to pci-quirks.c file and EXPORTed, this is part of the effort to move the ohci pci related code to generic pci code. -Passed "device" argument instead of "ohci_hcd" in sb800_prefetch() function to avoid extra include file in pci-quirks.c. V2: -Passed "device" argment instead of "pci_dev", then we use to_pci_dev() to get the "pci_dev" structure. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: host: xhci: fix compilation error for non-PCI based stacksMoiz Sonasath
For non PCI-based stacks, this function call usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); made from xhci_shutdown is not applicable. Ideally, we wouldn't have any PCI-specific code on a generic driver such as the xHCI stack, but it looks like we should just stub usb_disable_xhci_ports() out for non-PCI devices. [ balbi@ti.com: slight improvement to commit log ] This patch should be backported to kernels as old as 3.0, since the commit it fixes (e95829f474f0db3a4d940cae1423783edd966027 "xhci: Switch PPT ports to EHCI on shutdown.") was marked for stable. Signed-off-by: Moiz Sonasath<m-sonasath@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-08-09xhci: Switch PPT ports to EHCI on shutdown.Sarah Sharp
The Intel desktop boards DH77EB and DH77DF have a hardware issue that can be worked around by BIOS. If the USB ports are switched to xHCI on shutdown, the xHCI host will send a spurious interrupt, which will wake the system. Some BIOS will work around this, but not all. The bug can be avoided if the USB ports are switched back to EHCI on shutdown. The Intel Windows driver switches the ports back to EHCI, so change the Linux xHCI driver to do the same. Unfortunately, we can't tell the two effected boards apart from other working motherboards, because the vendors will change the DMI strings for the DH77EB and DH77DF boards to their own custom names. One example is Compulab's mini-desktop, the Intense-PC. Instead, key off the Panther Point xHCI host PCI vendor and device ID, and switch the ports over for all PPT xHCI hosts. The only impact this will have on non-effected boards is to add a couple hundred milliseconds delay on boot when the BIOS has to switch the ports over from EHCI to xHCI. This patch should be backported to kernels as old as 3.0, that contain the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Denis Turischev <denis@compulab.co.il> Tested-by: Denis Turischev <denis@compulab.co.il> Cc: stable@vger.kernel.org
2011-05-27Intel xhci: Support EHCI/xHCI port switching.Sarah Sharp
The Intel Panther Point chipsets contain an EHCI and xHCI host controller that shares some number of skew-dependent ports. These ports can be switched from the EHCI to the xHCI host (and vice versa) by a hardware MUX that is controlled by registers in the xHCI PCI configuration space. The USB 3.0 SuperSpeed terminations on the xHCI ports can be controlled separately from the USB 2.0 data wires. This switchover mechanism is there to support users who do a custom install of certain non-Linux operating systems that don't have official USB 3.0 support. By default, the ports are under EHCI, SuperSpeed terminations are off, and USB 3.0 devices will show up under the EHCI controller at reduced speeds. (This was more palatable for the marketing folks than having completely dead USB 3.0 ports if no xHCI drivers are available.) Users should be able to turn on xHCI by default through a BIOS option, but users are happiest when they don't have to change random BIOS settings. This patch introduces a driver method to switchover the ports from EHCI to xHCI before the EHCI driver finishes PCI enumeration. We want to switch the ports over before the USB core has the chance to enumerate devices under EHCI, or boot from USB mass storage will fail if the boot device connects under EHCI first, and then gets disconnected when the port switches over to xHCI. Add code to the xHCI PCI quirk to switch the ports from EHCI to xHCI. The PCI quirks code will run before any other PCI probe function is called, so this avoids the issue with boot devices. Another issue is with BIOS behavior during system resume from hibernate. If the BIOS doesn't support xHCI, it may switch the devices under EHCI to allow use of the USB keyboard, mice, and mass storage devices. It's supposed to remember the value of the port routing registers and switch them back when the OS attempts to take control of the xHCI host controller, but we all know not to trust BIOS writers. Make both the xHCI driver and the EHCI driver attempt to switchover the ports in their PCI resume functions. We can't guarantee which PCI device will be resumed first, so this avoids any race conditions. Writing a '1' to an already set port switchover bit or a '0' to a cleared port switchover bit should have no effect. The xHCI PCI configuration registers will be documented in the EDS-level chipset spec, which is not public yet. I have permission from legal and the Intel chipset group to release this patch early to allow good Linux support at product launch. I've tried to document the registers as much as possible, so please let me know if anything is unclear. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-03-01USB host: Move AMD PLL quirk to pci-quirks.cAndiry Xu
This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c, and exports the functions to be used by xHCI driver later. AMD PLL quirk disable the optional PM feature inside specific SB700/SB800/Hudson-2/3 platforms under the following conditions: 1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. Without AMD PLL quirk, USB isochronous stream may stutter or have breaks occasionally, which greatly impair the performance of audio/video streams. Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be added to xHCI driver too. They are doing similar things actually, so move the quirk code to pci-quirks.c, which has several advantages: 1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and make them cleaner; 2. AMD chipset information will be probed only once and then stored. Currently they're probed during every OHCI/EHCI initialization, move the detect code to pci-quirks.c saves the repeat detect cost; 3. Build up synchronization among OHCI/EHCI/xHCI driver. In current code, every host controller enable/disable PLL only according to its own status, and may enable PLL while there is still isoc transfer on other HCs. Move the quirk to pci-quirks.c prevents this issue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17Revert "USB host: Move AMD PLL quirk to pci-quirks.c"Greg Kroah-Hartman
This reverts commit b7d5b439b7a40dd0a0202fe1c118615a3fcc3b25. It conflicts with commit baab93afc2844b68d57b0dcca5e1d34c5d7cf411 "USB: EHCI: ASPM quirk of ISOC on AMD Hudson" and merging the two just doesn't work properly. Cc: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04USB host: Move AMD PLL quirk to pci-quirks.cAndiry Xu
This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c, and exports the functions to be used by xHCI driver later. AMD PLL quirk disable the optional PM feature inside specific SB700/SB800/Hudson-2/3 platforms under the following conditions: 1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. Without AMD PLL quirk, USB isochronous stream may stutter or have breaks occasionally, which greatly impair the performance of audio/video streams. Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be added to xHCI driver too. They are doing similar things actually, so move the quirk code to pci-quirks.c, which has several advantages: 1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and make them cleaner; 2. AMD chipset information will be probed only once and then stored. Currently they're probed during every OHCI/EHCI initialization, move the detect code to pci-quirks.c saves the repeat detect cost; 3. Build up synchronization among OHCI/EHCI/xHCI driver. In current code, every host controller enable/disable PLL only according to its own status, and may enable PLL while there is still isoc transfer on other HCs. Move the quirk to pci-quirks.c prevents this issue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14[PATCH] USB: pci-quirks.c: proper prototypesAdrian Bunk
This patch adds a header file with proper prototypes for two functions in drivers/usb/host/pci-quirks.c. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>