summaryrefslogtreecommitdiff
path: root/drivers/usb/renesas_usbhs/fifo.h
AgeCommit message (Collapse)Author
2013-03-18usb: renesas: remove unused DMA_ADDR_INVALIDFelipe Balbi
DMA_ADDR_INVALID isn't used anymore, it's safe to remove it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-14usb: renesas: fix scheduling in atomic context bugGuennadi Liakhovetski
The current renesas_usbhs driver triggers BUG: scheduling while atomic: ksoftirqd/0/3/0x00000102 with enabled CONFIG_DEBUG_ATOMIC_SLEEP, by submitting DMA transfers from an atomic (tasklet) context, which is not supported by the shdma dmaengine driver. Fix it by switching to a work. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-13usb: renesas_usbhs: care pipe sequenceKuninori Morimoto
driver has to re-use the limited pipe for each device/endpoint when it is USB host hub mode, since number of pipe has limitation. Then, each pipe should care own pipe sequence for next packet. This patch adds sequence control. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13usb: gadget: renesas_usbhs: add data/status stage handlerKuninori Morimoto
mod_host needs data/status stage handler Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13usb: gadget: renesas_usbhs: move done callback to struct usbhs_pktKuninori Morimoto
transfer done function was registered in struct struct usbhs_pipe_info. It was good for mod_gadget, but not good for mod_host. This function move it to struct usbhs_pkt. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13usb: gadget: renesas_usbhs: struct usbhs_pipe hold handlerKuninori Morimoto
packet handler had moved to struct usbhs_pipe from struct usbhsg_uep. it is preparation of mod_host support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-13usb: gadget: renesas_usbhs: move USBHSF_PKT_xxx to pipe.cKuninori Morimoto
There is no longer necessity that USBHSF_PKT_xxx are in fifo.h. it are used in only fifo.c now. This patch move it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-06-07usb: renesas_usbhs: add DMAEngine supportKuninori Morimoto
USB DMA was installed on "normal DMAC" when SH7724 or older SuperH, but the "USB-DMAC" was prepared on recent SuperH. These 2 DMAC have a little bit different behavior. This patch add DMAEngine code for "normal DMAC", but it is still using PIO fifo. The DMA fifo will be formally supported in the future. You can enable DMA fifo by local fixup usbhs_fifo_pio_push_handler -> usbhs_fifo_dma_push_handler usbhs_fifo_pio_pop_handler -> usbhs_fifo_dma_pop_handler on usbhsg_ep_enable. This DMAEngine was tested by g_file_storage on SH7724 Ecovec board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: tidyup pio handler nameKuninori Morimoto
This patch tidyup PIO packet handler name. This is a preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: add pipe/fifo linkKuninori Morimoto
renesas_usbhs has CFIFO which is for PIO transfer, and D0FIFO/D1FIFO which are for DMA transfer. The pipe selects one of these fifo when it send/recv data. But fifo must not be selected to different pipe in same time. This patch add pipe/fifo link for each other, and fifo is not selected by another pipe until it is unselected. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: add usbhsf_fifoKuninori Morimoto
renesas_usbhs has CFIFO/D0FIFO/D1FIFO. But current renesas_usbhs is using CFIFO (for PIO) only for now. The fifo selection method is needed for DMAEngine support. This is a preparation for DMAEngine support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: shrink spin lock areaKuninori Morimoto
spin lock was very effective while doing 1 packet send/recv on current renesas_usbhs driver. But this lock is enough only - modify packet/pipe link - modify interrpt mask - modify fifo access This patch shrink spin lock area Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: modify data transfer interruptKuninori Morimoto
On current driver, overall data transfer method was implemented in fifo.c, but its interrupt which is member of packet queue control was still in mod_gadget.c. This patch move it into fifo.c. By this patch, the packet/fifo control is independent from mod_gadget. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: modify data transfer methodKuninori Morimoto
On current driver, main data transfer function was implemented in fifo.c, but the overall controlling was implementing in mod_gadget.c. This style is not useful to support host and DMAEngine in the future. But the interrupt for data transfer cannot separate easily for now, because it is deeply related to mod_gadget. This patch move the overall data transfer method into fifo.c except interrupt. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: modify packet queue control methodKuninori Morimoto
Current renesas_usbhs driver is controlling packet queue on mod_gadget.c. But it has relationship with pipe/fifo, not host/gadget. So, controlling USB packet queue in pipe.c/fifo.c is more convenient than in mod_gadget.c. This patch modify it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: divide data transfer functionsKuninori Morimoto
DMAEngine will be supported to this driver in the future. Then, both PIO and DMA data transfer method should be supported. But, the transfer function can returns the result immediately in PIO version, but it can't in DMA version. This patch divides data transfer functions into top/bottom half in preparation for DMAEngine support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07usb: renesas_usbhs: fifo became independent from pipe.Kuninori Morimoto
Current renesas_usbhs has PIO data transfer mode which controls CFIFO. And it was implemented in pipe.c. But, fifo control method needs more flexible implementation to support DMAEngine. This patch create fifo.c, and it became independent from pipe.c. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>