summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2013-05-28usb: phy: ab8500-usb: move phy tuning values on separate functionsFabio Baltieri
Move each chip's PHY tuning value set code to a separate function to improve code readability. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: add platform_device_id tableFabio Baltieri
Add an initial platform_device_id table to the ab8500-usb driver to allow probing additional variants of the ab8500 family chips. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: fix phy tuning value select logicFabio Baltieri
The driver supports both ab8500 and ab8505, but the actual phy tuning values logic sets ab8500 values: if (!is_ab8500_2p0_or_earlier(ab->ab8500)) which is supposed to set values for ab8500, but incorrectly results true for ab8505 too. Fix this by adding an additional is_ab8500(ab->ab8500) check. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: restart phy during probeSakethram Bommisetti
Add an ab8500_usb_restart_phy() function called during probe to ensure that the AB8500 USB phy is initialized properly even when a cable is connected at probe time. Without this fix subsequent host reconnections are not detected properly. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: phy: ab8500-usb: add transceiver clock controlMian Yousaf Kaukab
Add common clock support code for the ab8500-usb phy driver. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: various cosmetic fixes on ux500 filesFabio Baltieri
Various non functional coding style fixes on ux500_dma.c and phy-ab8500-usb.c drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: enable ux500 host side dma supportMian Yousaf Kaukab
Host side dma support for ux500 is enabled by piggybacking on Inventra dma support. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: gadget: uvc: Remove unneeded endpoint descriptor fields initializationLaurent Pinchart
The streaming endpoint bandwidth parameters are computed are runtime from module parameters. Remove the corresponding static initializers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: eliminate musb_to_hcdDaniel Mack
With the hcd is now a direct member of struct musb, we can now simply eliminate the musb_to_hcd() macro. There aren't that many users left anyway, as some where already fixed up when parts were factored out to musb_host.c Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: use musb->port_modeDaniel Mack
Initialize the host and gadget subsystems of the musb driver only when the appropriate mode is selected from platform data, or device-tree information, respectively. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: re-introduce musb->port_modeDaniel Mack
Define MUSB_PORT_MODE_{HOST,GADGET,DUAL_ROLE} and store the platform-specified value in struct musb. Note that MUSB_PORT_MODE_HOST has to be set to 1 in order to match existing device tree bindings which are already documented but in fact unusued. For information on the bindings, please refer to Documentation/devicetree/bindings/usb/omap-usb.txt Documentation/devicetree/bindings/usb/am33xx-usb.txt Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: add musb_host_setup() and musb_host_cleanup()Daniel Mack
This patch re-introduces the bits that are necessary to use the musb controller in host mode. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modesDaniel Mack
This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: factor out hcd initalizationDaniel Mack
The musb struct is currently allocated along with the hcd, which makes it difficult to build a driver that only acts as gadget device. Fix this by allocating musb directly, and keep the hcd around as a pointer in the musb struct. struct hc_driver musb_hc_driver can now also be static to musb_host.c, and the macro musb_to_hcd() is just a pointer dereferencer for now, and will be eliminated later. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: move musb_start to musb_virthub.cDaniel Mack
This function has its only user in musb_virthub.c, so let's move it there and make it static. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: gadget: remove hcd initializationDaniel Mack
This will be done from a more appropriate location and as it doesn't work anyway, it can safely be removed before the other changes. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: factor some host-specific functionsDaniel Mack
In particular, this introduces musb_host_resume_root_hub()and musb_host_poke_root_hub() which will be stubbed out later. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: move function declarations to musb_{host,gadget}.hDaniel Mack
Let the function declarations live in the header files they belong to, which makes it easier to stub them out later. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: gadget: drop unused USB_GADGET_MUSB_HDRCDaniel Mack
The functionality meant to be represented by this symbol will be re-added later, but for now, USB_GADGET_MUSB_HDRC is in fact unused and can be dropped. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: remove 'ignore_disconnect' flagFelipe Balbi
This was related to an old bug on early versions of TUSB6010 which we don't support anymore. It's known to cause issues on several other situations with more recent devices so we better remove this flag now and come up with a better workaround should one be deemed necessary. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: fix incorrect usage of resource pointerFelipe Balbi
We can't simply pass the resource pointer from our device down to our children, otherwise module reinsertion will not work as the resource will continue to be marked as busy. Fix it by building a proper struct resource for our child musb device. Tested-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-23Merge tag 'usb-3.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2 The majority of these are USB gadget fixes, but they are all small. Other than that, some USB host controller fixes, and USB serial driver fixes for problems reported with them. Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to be almost impossible to get right for all of the different platforms these days." * tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: cxacru: potential underflow in cxacru_cm_get_array() USB: ftdi_sio: Add support for Newport CONEX motor drivers USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card usb: ohci: fix goto wrong tag in err case usb: isp1760-if: fix memleak when platform_get_resource fail usb: ehci-s5p: fix memleak when fallback to pdata USB: serial: clean up chars_in_buffer USB: ti_usb_3410_5052: fix chars_in_buffer overhead USB: io_ti: fix chars_in_buffer overhead USB: ftdi_sio: fix chars_in_buffer overhead USB: ftdi_sio: clean up get_modem_status USB: serial: add generic wait_until_sent implementation USB: serial: add wait_until_sent operation USB: set device dma_mask without reference to global data USB: Blacklisted Cinterion's PLxx WWAN Interface usb: option: Add Telewell TW-LTE 4G USB: EHCI: remove bogus #error USB: reset resume quirk needed by a hub USB: usb-stor: realtek_cr: Fix compile error usb, chipidea: fix link error when USB_EHCI_HCD is a module ...
2013-05-20USB: cxacru: potential underflow in cxacru_cm_get_array()Dan Carpenter
The value of "offd" comes off the instance->rcv_buf[] and we used it as the offset into an array. The problem is that we check the upper bound but not for negative values. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-18drivers/usb/phy: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-18drivers/usb/host: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-05-18drivers/usb/gadget: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-18drivers/usb/chipidea: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2013-05-17USB: ftdi_sio: Add support for Newport CONEX motor driversGomella, Andrew (NIH/NHLBI) [F]
Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams
A rebranded Novatel E371 for AT&T's LTE bands. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17usb: ohci: fix goto wrong tag in err caseLibo Chen
fix goto wrong tag in usb_hcd_nxp_probe Signed-off-by: Libo Chen <libo.chen@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17usb: isp1760-if: fix memleak when platform_get_resource failLibo Chen
When platform_get_resource fail, we should release_mem_region Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17usb: ehci-s5p: fix memleak when fallback to pdataLibo Chen
When devm_usb_get_phy fail, we should free hcd Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: serial: clean up chars_in_bufferJohan Hovold
No need to grab disconnect mutex in chars_in_buffer now that no sub-driver is or should be querying hardware buffers anymore. (They should use wait_until_sent.) Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ti_usb_3410_5052: fix chars_in_buffer overheadJohan Hovold
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 2c992cd73 ("USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: io_ti: fix chars_in_buffer overheadJohan Hovold
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 263e1f9f ("USB: io_ti: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ftdi_sio: fix chars_in_buffer overheadJohan Hovold
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 6f602912 ("usb: serial: ftdi_sio: Add missing chars_in_buffer function") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: ftdi_sio: clean up get_modem_statusJohan Hovold
Use usb-serial port rather than tty as argument to get_modem_status. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: serial: add generic wait_until_sent implementationJohan Hovold
Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: serial: add wait_until_sent operationJohan Hovold
Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: set device dma_mask without reference to global dataStephen Warren
Many USB host drivers contain code such as: if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; ... where tegra_ehci_dma_mask is a global. I suspect this code originated in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and was simply copied everywhere else. This works fine when the code is built-in, but can cause a crash when the code is in a module. The first module load sets up the dma_mask pointer, but if the module is removed and re-inserted, the value is now non-NULL, and hence is not updated to point at the new location, and hence points at a stale location within the previous module load address, which in turn causes a crash if the pointer is de-referenced. The simplest way of solving this seems to be to copy the code from ehci-platform.c, which uses the coherent_dma_mask as the target for the dma_mask pointer. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: Blacklisted Cinterion's PLxx WWAN InterfaceSchemmel Hans-Christoph
/drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17usb: option: Add Telewell TW-LTE 4GTeppo Kotilainen
Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: EHCI: remove bogus #errorArnd Bergmann
The EHCI host controller driver can be built standalone now, without enabling any of the available bus glue drivers, so there is not really a reason to error out here: drivers/usb/host/ehci-hcd.c:1303:2: error: #error "missing bus glue for ehci-hcd" #error "missing bus glue for ehci-hcd" The alternative would be to change the Kconfig code to build the ehci-hcd module only if any of the symbols below are in fact enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: reset resume quirk needed by a hubOliver Neukum
Werner Fink has reported problems with this hub. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17USB: usb-stor: realtek_cr: Fix compile errorWei WANG
To fix the compile error when CONFIG_PM_RUNTIME is not enabled, move the declaration of us out of CONFIG_REALTEK_AUTOPM macro in rts51x_chip. drivers/usb/storage/realtek_cr.c: In function 'realtek_cr_destructor': drivers/usb/storage/realtek_cr.c:942:11: error: 'struct rts51x_chip' has no member named 'us' Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-17usb, chipidea: fix link error when USB_EHCI_HCD is a moduleDavid Rientjes
Fixes link error when USB_EHCI_HCD=m and USB_CHIPIDEA_HOST=y: drivers/built-in.o: In function `ci_hdrc_host_init': drivers/usb/chipidea/host.c:104: undefined reference to `ehci_init_driver' as a result of commit 09f6ffde2ece ("USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver"). Cc: stable@vger.kernel.org [v3.7+] Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-15USB: remove remaining instances of USB_SUSPENDAlan Stern
Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove CONFIG_USB_SUSPEND option) failed to remove all of the usages of USB_SUSPEND throughout the kernel. This patch (as1677) removes the remaining instances of that symbol. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-15USB: OHCI: fix logic for scheduling isochronous URBsAlan Stern
The isochronous scheduling logic in ohci-hcd has a bug. The calculation for skipping TDs that are too late should be carried out only in the !URB_ISO_ASAP case. When URB_ISO_ASAP is set, the URB is pushed back so that none of the TDs are too late, which would cause the calculation to overflow. The patch also fixes the calculation to avoid overflow in the case where the frame value wraps around. This should be applied to -stable kernels going back to 3.8. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-15USB: fix latency in uhci-hcd and ohci-hcdAlan Stern
Commits c44b225077bb1fb25ed5cd5c4f226897b91bedd4 (UHCI: implement new semantics for URB_ISO_ASAP) and 6a41b4d3fe8cd4cc95181516fc6fba7b1747a27c (OHCI: implement new semantics for URB_ISO_ASAP) increased the latency for isochronous URBs in uhci-hcd and ohci-hcd respectively to 2 milliseconds, in an attempt to avoid underruns. It turns out that not only was this unnecessary -- 1-ms latency works okay -- it also causes problems with certain application loads such as real-time audio. This patch changes the latency for both drivers back to 1 ms. This should be applied to -stable kernels going back to 3.8. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Joe Rayhawk <jrayhawk@fairlystable.org> CC: Clemens Ladisch <clemens@ladisch.de> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-15USB: UHCI: fix for suspend of virtual HP controllerAlan Stern
HP's virtual UHCI host controller takes a long time to suspend (several hundred microseconds), even when no devices are attached. This provokes a warning message from uhci-hcd in the auto-stop case. To prevent this from happening, this patch adds a test to avoid performing an auto-stop when the wait_for_hp quirk flag is set. The controller will still suspend through the normal runtime PM mechanism. And since that pathway includes a 1-ms delay, the slowness of the virtual hardware won't matter. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: ZhenHua <zhen-hual@hp.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v0.10.2 at 2024-11-07 05:37:44 (GMT)