summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Expand)Author
2014-02-06usb: chipidea: need to mask INT_STATUS when write otgscPeter Chen
2014-02-06usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28Peter Chen
2014-02-06usb: chipidea: add freescale imx28 special write register methodPeter Chen
2014-01-09usb: musb: only cancel work if it is initializedSebastian Andrzej Siewior
2014-01-09usb: musb: core: Call dma_controller_destroy() in error path only once.Sebastian Andrzej Siewior
2014-01-09usb: chipidea: fix nobody cared IRQ when booting with host rolePeter Chen
2014-01-09usb: chipidea: host: Only disable the vbus regulator if it is not NULLFabio Estevam
2014-01-09usb: cdc-wdm: manage_power should always set needs_remote_wakeupBjørn Mork
2014-01-09xhci: Limit the spurious wakeup fix only to HP machinesTakashi Iwai
2014-01-09usb: serial: zte_ev: move support for ZTE AC2726 from zte_ev back to optionDmitry Kunilov
2014-01-09USB: serial: fix race in generic writeJohan Hovold
2013-12-20USB: option: support new huawei devicesFangxiaozhi (Franko)
2013-12-20USB: serial: option: blacklist interface 1 for Huawei E173s-6Gustavo Zacarias
2013-12-20usb: musb: musb_cppi41: handle pre-mature TX complete interruptSebastian Andrzej Siewior
2013-12-20usb: musb: musb_cppi41: factor most of cppi41_dma_callback() into cppi41_tran...Sebastian Andrzej Siewior
2013-12-20usb: xhci: Link TRB must not occur within a USB payload burstDavid Laight
2013-12-20usb: gadget: composite: reset delayed_status on reset_configMichael Grzeschik
2013-12-20usb: dwc3: fix implementation of endpoint wedgeAlan Stern
2013-12-20usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHEDJulius Werner
2013-12-14Merge remote-tracking branch 'linus/master' into mergeScott Wood
2013-12-12USB: cdc-acm: Added support for the Lenovo RD02-D400 USB ModemDavid Cluytens
2013-12-12USB: spcp8x5: correct handling of CS5 settingColin Leitner
2013-12-12USB: mos7840: correct handling of CS5 settingColin Leitner
2013-12-12USB: ftdi_sio: fixed handling of unsupported CSIZE settingColin Leitner
2013-12-12USB: pl2303: fixed handling of CS5 settingColin Leitner
2013-12-08usb: wusbcore: change WA_SEGS_MAX to a legal valueThomas Pugliese
2013-12-08usb: musb: davinci: fix resources passed to MUSB driver for DM6467Sergei Shtylyov
2013-12-05usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHEDJulius Werner
2013-12-05usb: ohci-pxa27x: include linux/dma-mapping.hDaniel Mack
2013-12-05USB: cdc-acm: Added support for the Lenovo RD02-D400 USB ModemDavid Cluytens
2013-12-03USB: pl2303: fixed handling of CS5 settingColin Leitner
2013-12-03USB: ftdi_sio: fixed handling of unsupported CSIZE settingColin Leitner
2013-12-03USB: mos7840: correct handling of CS5 settingColin Leitner
2013-12-03USB: spcp8x5: correct handling of CS5 settingColin Leitner
2013-12-02usb: wusbcore: fix deadlock in wusbhc_gtk_rekeyThomas Pugliese
2013-12-02usb: wusbcore: do device lookup while holding the hc mutexThomas Pugliese
2013-12-02usb: wusbcore: send keepalives to unauthenticated devicesThomas Pugliese
2013-12-02USB: option: support new huawei devicesFangxiaozhi (Franko)
2013-12-02USB: serial: option: blacklist interface 1 for Huawei E173s-6Gustavo Zacarias
2013-12-02usb: xhci: Link TRB must not occur within a USB payload burstDavid Laight
2013-11-29usb: musb: core: properly free host / device structs in err pathSebastian Andrzej Siewior
2013-11-29usb: musb: dsps: redo the otg timerSebastian Andrzej Siewior
2013-11-29usb: musb: dsps: move try_idle to start hookSebastian Andrzej Siewior
2013-11-29usb: musb: call musb_start() only once in OTG modeSebastian Andrzej Siewior
2013-11-29usb: musb: cancel work on removalSebastian Andrzej Siewior
2013-11-29usb: wusbcore: set the RPIPE wMaxPacketSize value correctlyThomas Pugliese
2013-11-29usb: hub: Clear Port Reset Change during init/resumeJulius Werner
2013-11-29usb: Disable USB 2.0 Link PM before device reset.Sarah Sharp
2013-11-29xhci: Set L1 device slot on USB2 LPM enable/disable.Sarah Sharp
2013-11-29xhci: Enable LPM support only for hardwired or BESL devicesMathias Nyman