summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2012-10-20Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc fixes from Olof Johansson: "A set of fixes and some minor cleanups for -rc2: - A series from Arnd that fixes warnings in drivers and other code included by ARM defconfigs. Most have been acked by corresponding maintainers (and seem quite hard to argue not picking up anyway in the few exception cases). - A few misc patches from the list for integrator/vt8500/i.MX - A batch of fixes to OMAP platforms, fixing: - boot problems on beaglebone, - regression fixes for local timers - clockdomain locking fixes - a few boot/sparse warnings - For Tegra: - Clock rate calculation overflow fix - Revert a change that removed timer clocks and a fix for symbol name clashes - For Renesas: - IO accessor / annotation cleanups to remove warnings - For Kirkwood/Dove/mvebu: - Fixes for device trees for Dove (some minor cleanups, some fixes) - Fixes for the mvebu gpio driver - Fix build problem for Feroceon due to missing ifdefs - Fix lsxl DTS files" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2 gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type ARM: dove: Add crypto engine to DT ARM: dove: Remove watchdog from DT ARM: dove: Restructure SoC device tree descriptor ARM: dove: Fix clock names of sata and gbe ARM: dove: Fix tauros2 device tree init ARM: dove: Add pcie clock support ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck ARM: OMAP: resolve sparse warning concerning debug_card_init() ARM: OMAP4: Fix twd_local_timer_register regression ARM: tegra: add tegra_timer clock ARM: tegra: rename tegra system timer ...
2012-10-19Merge branch 'testing/driver-warnings' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes A collection of warning fixes on non-ARM code from Arnd Bergmann: * 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN SCSI: ARM: make fas216_dumpinfo function conditional SCSI: ARM: ncr5380/oak uses no interrupts
2012-10-19Merge tag 'usb-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are the USB patches against your 3.7-rc1 tree. There are the usual UABI header file movements, and we finally are now able to remove the dbg() macro that is over 15 years old (that had to wait for after some other trees got merged into yours during the big 3.7-rc1 merge window.) Other than that, nothing major, just a number of bugfixes and new device ids. It turns out that almost all of the usb-serial drivers had bugs in how they were handling their internal data, leaking memory, hence all of those fixups. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits) USB: option: add more ZTE devices USB: option: blacklist net interface on ZTE devices usb: host: xhci: New system added for Compliance Mode Patch on SN65LVPE502CP USB: io_ti: fix sysfs-attribute creation USB: iuu_phoenix: fix sysfs-attribute creation USB: spcp8x5: fix port-data memory leak USB: ssu100: fix port-data memory leak USB: ti_usb_3410_5052: fix port-data memory leak USB: oti6858: fix port-data memory leak USB: iuu_phoenix: fix port-data memory leak USB: kl5kusb105: fix port-data memory leak USB: io_ti: fix port-data memory leak USB: keyspan_pda: fix port-data memory leak USB: f81232: fix port-data memory leak USB: io_edgeport: fix port-data memory leak USB: kobil_sct: fix port-data memory leak USB: cypress_m8: fix port-data memory leak usb: acm: fix the computation of the number of data bits usb: Missing dma_mask in ehci-vt8500.c when probed from device-tree usb: Missing dma_mask in uhci-platform.c when probed from device-tree ...
2012-10-19USB: ehci-fsl: Return valid error in ehci_fsl_setup_phyBen Collins
ehci_fsl_setup_phy is supposed to return an int, but had a void return value in the case of controller_ver being invalid. Introduced by commit 3735ba8db8e6 ("powerpc/usb: fix bug of CPU hang when missing USB PHY clock"), which missed one return. Signed-off-by: Ben Collins <ben.c@servergy.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-18USB: option: add more ZTE devicesBjørn Mork
Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-18USB: option: blacklist net interface on ZTE devicesBjørn Mork
Based on information from the ZTE Windows drivers. Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-18Merge tag 'fixes-for-v3.7-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus usb: fixes for v3.7-rc2 Here's the first set of fixes for v3.7-rc cycle. DesignWare Core USB3 Driver (dwc3) got two fixes. The first one fixes a long standing bug which would keep endpoint with BUSY flag set forever if we cancel a transfer which has already been started by the controller. The second fix will just switch PHYs back off when DWC3 driver is removed. MUSB fixed a bug which would cause a Kernel Oops at least on AM3517 when removing a device. For some reason that particular device can fall into a situation where you have both Disconnect and Endpoint IRQs happen simultaneously (have both bits set in IRQ_STATUS register) and, because Disconnect Interrupt is handled before Endpoint Interrupts, we would try to transfer data over a disconnected device, thus generating a kernel oops. Renensas' USB DRD driver got two fixes which are a) fixing an off-by-one bug on the pipe iterator implementation and b) fixing Interrupt Status Clear procedure in order to properly clear a single Interrupt event without clearing (and masking) other events we didn't handle yet.
2012-10-18usb: host: xhci: New system added for Compliance Mode Patch on SN65LVPE502CPAlexis R. Cortes
This minor change adds a new system to which the "Fix Compliance Mode on SN65LVPE502CP Hardware" patch has to be applied also. System added: Vendor: Hewlett-Packard. System Model: Z1 Signed-off-by: Alexis R. Cortes <alexis.cortes@ti.com> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-18USB: io_ti: fix sysfs-attribute creationJohan Hovold
Make sure port data is initialised before creating sysfs attributes to avoid a race. A recent patch ("USB: io_ti: fix port-data memory leak") got the sysfs-attribute creation and port-data initialisation ordering wrong. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-18USB: iuu_phoenix: fix sysfs-attribute creationJohan Hovold
Make sure sysfs attributes are created at port probe. A recent patch ("USB: iuu_phoenix: fix port-data memory leak") removed the sysfs-attribute creation by mistake. Reported-by: Yuanhan Liu <yuanhan.liu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: spcp8x5: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: ssu100: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: ti_usb_3410_5052: fix port-data memory leakJohan Hovold
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: oti6858: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: iuu_phoenix: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: kl5kusb105: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: io_ti: fix port-data memory leakJohan Hovold
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: keyspan_pda: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: f81232: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: io_edgeport: fix port-data memory leakJohan Hovold
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: kobil_sct: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: cypress_m8: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17usb: acm: fix the computation of the number of data bitsNicolas Boullis
The current code assumes that CSIZE is 0000060, which appears to be wrong on some arches (such as powerpc). Signed-off-by: Nicolas Boullis <nboullis@debian.org> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17usb: Missing dma_mask in ehci-vt8500.c when probed from device-treeTony Prisk
Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on arch-vt8500 when using devicetree. Without this patch, arch-vt8500 cannot detect ehci attached devices. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17usb: Missing dma_mask in uhci-platform.c when probed from device-treeTony Prisk
Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on platforms using devicetree. Without this patch, arch-vt8500 cannot detect uhci attached devices. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17USB: cdc-acm: fix pipe type of write endpointMing Lei
If the write endpoint is interrupt type, usb_sndintpipe() should be passed to usb_fill_int_urb() instead of usb_sndbulkpipe(). Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-17usbdevfs: Fix broken scatter-gather transferHenrik Rydberg
The handling of large output bulk transfers is broken; the same user page is read over and over again. Fixed with this patch. Cc: stable <stable@vger.kernel.org> Acked-by: Peter Stuge <peter@stuge.se> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-16USB: fix port probing and removal in garmin_gpsAlan Stern
This patch (as1615) fixes a bug in the Garmin USB serial driver. It uses attach, disconnect, and release routines to carry out actions that should be handled by port_probe and port_remove routines, because they access port-specific data. The bug causes an oops when the device in unplugged, because the private data for each port structure now gets erased when the port is unbound from the driver, resulting in a null-pointer dereference. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported--by: Markus Schauler <mschauler@gmail.com> Tested-by: Markus Schauler <mschauler@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-16USB: pl2303: fix port-data memory leakJohan Hovold
Fix port-data memory leak by allocating and freeing port data in port_probe/remove rather than in attach/release, and by introducing serial private data to store the device type which is interface rather than port specific. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-16USB: cp210x: fix port-data memory leakJohan Hovold
Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-16USB: belkin_sa: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-16USB: cyberjack: fix port-data memory leakJohan Hovold
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-16USB: ark3116: fix NULL-pointer dereferenceJohan Hovold
Fix NULL-pointer dereference at release by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is NULL when release is called. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-16usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04Alexandre Pereira da Silva
The STOTG04 is an replacement for ISP1301. Most of the registers on STOTG04 are the same as on ISP1301, but the register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the ST part. This is a work around for this by using the interrupt source register that should behave the same on both parts and has the needed information. Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: renesas_usbhs: fixup interrupt status clear methodKuninori Morimoto
When interrupt happened, renesas_usbhs driver gets irq status by usbhs_status_get_each_irq(), and cleared all status by using 0. But, this method is incorrect, since extra interrupt might occur between them. This patch cleared corresponding bits only Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st posKuninori Morimoto
__usbhs_for_each_pipe() is the macro which moves around each pipe, but it has a bug which didn't care about 1st pipe's position. Because of this bug, it moves around pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3... This patch modifies it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15usb: gadget: Make webcam gadget select USB_LIBCOMPOSITELaurent Pinchart
Composite gadget support is now available as a library instead of being built with each gadget. Composite drivers need to select USB_LIBCOMPOSITE. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15usb: dwc3: shutdown usb_phy when removing the deviceVivek Gautam
We call usb_phy_init() from dwc3_core_init() during probe, so adding usb_phy_shutdown() to dwc3_core_exit() while removing the device so we don't keep PHYs turned on, consuming power, unnecessarily. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15usb: musb: am35xx: drop spurious unplugging a deviceStefano Babic
On AM3517, tx and rx interrupt are detected together with the disconnect event. This generates a kernel panic in musb_interrupt, because rx / tx are handled after disconnect. This issue was seen on a Technexion's TAM3517 SOM. Unplugging a device, tx / rx interrupts together with disconnect are detected. This brings to kernel panic like this: [ 68.526153] Unable to handle kernel NULL pointer dereference at virtual address 00000011 [ 68.534698] pgd = c0004000 [ 68.537536] [00000011] *pgd=00000000 [ 68.541351] Internal error: Oops: 17 [#1] ARM [ 68.545928] Modules linked in: [ 68.549163] CPU: 0 Not tainted (3.6.0-rc5-00020-g9e05905 #178) [ 68.555694] PC is at rxstate+0x8/0xdc [ 68.559539] LR is at musb_interrupt+0x98/0x858 [ 68.564239] pc : [<c035cd88>] lr : [<c035af1c>] psr: 40000193 [ 68.564239] sp : ce83fb40 ip : d0906410 fp : 00000000 [ 68.576293] r10: 00000000 r9 : cf3b0e40 r8 : 00000002 [ 68.581817] r7 : 00000019 r6 : 00000001 r5 : 00000001 r4 : 000000d4 [ 68.588684] r3 : 00000000 r2 : 00000000 r1 : ffffffcc r0 : cf23c108 [ 68.595550] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment ke Note: this behavior is not seen with a USB hub, while it is easy to reproduce connecting a USB-pen directly to the USB-A of the board. Drop tx / rx interrupts if disconnect is detected. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Felipe Balbi <balbi@ti.com> Cc: stable@vger.kernel.org # 3.5 3.6 Tested-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-15usb: dwc3: gadget: fix 'endpoint always busy' bugFelipe Balbi
If a USB transfer has already been started, meaning we have already issued StartTransfer command to that particular endpoint, DWC3_EP_BUSY flag has also already been set. When we try to cancel this transfer which is already in controller's cache, we will not receive XferComplete event and we must clear DWC3_EP_BUSY in order to allow subsequent requests to be properly started. The best place to clear that flag is right after issuing DWC3_DEPCMD_ENDTRANSFER. Cc: stable@vger.kernel.org # v3.4 v3.5 v3.6 Reported-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-13Merge tag 'for-usb-linus-2012-10-11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus USB 3.0 Link PM fixes. Hi Greg, Here's four fixes for the USB 3.0 Link Power Management code. They work around some USB 3.0 devices that don't support LPM, like the Western Digital My Passport hard drive. They also fix an LPM disable ref count bug that would cause LPM to remain disabled for a device after a failed probe. Please queue for 3.7 after the merge window closes. Several patches are marked for stable. Sarah Sharp
2012-10-11Add CDC-ACM support for the CX93010-2x UCMxx USB ModemJean-Christian de Rivaz
This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572 and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized. Reference: http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5 See idVendor and idProduct in table 6-1. Device Descriptors Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull scsi target updates from Nicholas Bellinger: "Things have been calm for the most part with no new fabric drivers in flight for v3.7 (we're up to eight now !), so this update is primarily focused on addressing a few long-standing items within target-core and iscsi-target fabric code. The highlights include: - target: Simplify fabric sense data length handling (roland) - qla2xxx: Fix endianness of task management response code (roland) - target: fix truncation of mode data, support zero allocation length (paolo) - target: Properly support zero-length commands in normal processing path (paolo) - iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT PDU (ronnie + nab) - iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode (ronnie + nab) - target/file: Re-enable optional fd_buffered_io=1 operation (nab + hch) - iscsi-target: Add MaxXmitDataSegmenthLength forr target -> initiator MDRSL declaration (nab) - target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough (nab + hch) - tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch + nab) - tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab + hch) The last series for adding a new target_submit_cmd_map_sgls() fabric caller (as requested by hch) that accepts pre-allocated SGL memory (using existing logic), along with converting tcm_loop + tcm_vhost has only been in -next for the last days, but has gotten enough review +testing and is clear enough a mechanical change that I think it's reasonable to merge for -rc1 code. Thanks again to everyone who contributed this round! Extra special thanks to Roland (PureStorage) for tracking down the qla2xxx target TMR response code endian issue, and to Paolo (Redhat) for resolving the long standing zero-length CDB issues within target-core between virtual and pSCSI backends." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits) iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values iscsit: proper endianess conversions iscsit: use the itt_t abstract type iscsit: add missing endianess conversion in iscsit_check_inaddr_any iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp iscsit: mark various functions static target/iscsi: precedence bug in iscsit_set_dataout_sequence_values() target/usb-gadget: strlen() doesn't count the terminator target/usb-gadget: remove duplicate initialization tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls target: Add control CDB READ payload zero work-around tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength iscsi-target: Add MaxXmitDataSegmentLength connection recovery check iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength iscsi-target: Enable MaxXmitDataSegmentLength operation in login path iscsi-target: Add base MaxXmitDataSegmentLength code target/file: Re-enable optional fd_buffered_io=1 operation ...
2012-10-09USB: EHCI: mark ehci_orion_conf_mbus_windows __devinitArnd Bergmann
The __devinit section is going away soon, but while it's still there, we get a correct warning about ehci_orion_conf_mbus_windows being discarded before its caller, so it should be marked __devinit rather than __init. Without this patch, building dove_defconfig results in: WARNING: drivers/usb/host/built-in.o(.devinit.text+0x8a4): Section mismatch in reference from the function ehci_orion_drv_probe() to the function .init.text:ehci_orion_conf_mbus_windows() The function __devinit ehci_orion_drv_probe() references a function __init ehci_orion_conf_mbus_windows(). If ehci_orion_conf_mbus_windows is only used by ehci_orion_drv_probe then annotate ehci_orion_conf_mbus_windows with a matching annotation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org
2012-10-09Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge patches from Andrew Morton: "A few misc things and very nearly all of the MM tree. A tremendous amount of stuff (again), including a significant rbtree library rework." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (160 commits) sparc64: Support transparent huge pages. mm: thp: Use more portable PMD clearing sequenece in zap_huge_pmd(). mm: Add and use update_mmu_cache_pmd() in transparent huge page code. sparc64: Document PGD and PMD layout. sparc64: Eliminate PTE table memory wastage. sparc64: Halve the size of PTE tables sparc64: Only support 4MB huge pages and 8KB base pages. memory-hotplug: suppress "Trying to free nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning mm: memcg: clean up mm_match_cgroup() signature mm: document PageHuge somewhat mm: use %pK for /proc/vmallocinfo mm, thp: fix mlock statistics mm, thp: fix mapped pages avoiding unevictable list on mlock memory-hotplug: update memory block's state and notify userspace memory-hotplug: preparation to notify memory block's state at memory hot remove mm: avoid section mismatch warning for memblock_type_name make GFP_NOTRACK definition unconditional cma: decrease cc.nr_migratepages after reclaiming pagelist CMA: migrate mlocked pages kpageflags: fix wrong KPF_THP on non-huge compound pages ...
2012-10-09mm: kill vma flag VM_RESERVED and mm->reserved_vm counterKonstantin Khlebnikov
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09Merge tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linuxLinus Torvalds
Pull Xtensa patchset from Chris Zankel: "The Xtensa tree has been broken for some time now, and this patchset brings it back to life. It has been part of the linux-next tree for some time. Most changes are inside the xtensa subdirectory; the other changes mostly add another rule to already existing #ifdefs to exclude Xtensa, where required. The only 'common' change is to add two more sections ('.xt.prop' and '.xt.lit') to the white list in modpost." * tag 'xtensa-next-20121008' of git://github.com/czankel/xtensa-linux: (27 commits) xtensa: Setup CROSS_COMPILE at the top xtensa: drop CONFIG_EMBEDDED_RAMDISK xtensa: fix TIOCGSERIAL and TIOCSSERIAL definitions xtensa: provide dummy gcc intrinsics xtensa: add missing symbol exports parport: disable for xtensa arch xtensa: rename MISC SR definition to avoid name clashes hisax: disable build for big-endian xtensa xtensa: fix CODA build xtensa: fix parallel make xtensa: ISS: drop unused io.c xtensa: ISS: exit simulator in case of halt or poweroff xtensa: ISS: change keyboard polling rate xtensa: ISS: add platform_pcibios_init xtensa: ISS: add dummy serial.h for ISS platform xtensa: change default platform clock frequency to 10MHz xtensa: add ARCH_WANT_OPTIONAL_GPIOLIB to xtensa config xtensa: set NO_IOPORT to 'n' by default xtensa: adopt generic io routines xtensa: fix ioremap ...
2012-10-08usb: trival: Fix debugging units mistake.Sarah Sharp
SEL and PEL are in microseconds, not milliseconds. Also, fix a split string that will trigger checkpatch warnings. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-10-08usb: Send Set SEL before enabling parent U1/U2 timeout.Sarah Sharp
The Set SEL control transfer tells a device the exit latencies associated with a device-initated U1 or U2 exit. Since a parent hub may initiate a transition to U1 soon after a downstream port's U1 timeout is set, we need to make sure the device receives the Set SEL transfer before the parent hub timeout is set. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-10-08usb: Don't enable LPM if the exit latency is zero.Sarah Sharp
Some USB 3.0 devices signal that they don't implement Link PM by having all zeroes in the U1/U2 exit latencies in their SuperSpeed BOS descriptor. Don found that a Western Digital device he has experiences transfer errors when LPM is enabled. The lsusb shows the U1/U2 exit latencies are set to zero: Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 22 bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds The fix is to not enable LPM for a particular link state if we find its corresponding exit latency is zero. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Don Zickus <dzickus@redhat.com> Tested-by: Don Zickus <dzickus@redhat.com> Cc: stable@vger.kernel.org