summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2013-01-21USB: Set usb port's DeviceRemovable according acpi informationLan Tianyu
ACPI provide "_PLD" and "_UPC" aml methods to describe usb port visibility and connectability. This patch is to add usb_hub_adjust_DeviceRemovable() to adjust usb hub port's DeviceRemovable according ACPI information and invoke it in the rh_call_control(). When hub descriptor request is issued at first time, usb port device isn't created and usb port is not bound with acpi. So first hub descriptor request is not changed based on ACPI information. After usb port devices being created, call usb_hub_adjust_DeviceRemovable in the hub_configure() and then set hub port's DeviceRemovable according ACPI information and this also works for non-root hub. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21drivers/usb/chipidea/core.c: adjust duplicate testJulia Lawall
Delete successive tests to the same location. In this case res has already been tested for being NULL, and calling devm_request_and_ioremap will not make it NULL. On the other hand, devm_request_and_ioremap can return NULL on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21USB: storage: avoid scanning other targets for single target deviceMing Lei
This patch sets scsi_host->max_id as 1 if the device's quirk flag of US_FL_SCM_MULT_TARG isn't set, because there are only 6 mass storage devices marked as mutiple targets from unusual_devs.h. This patch is a small optimization about scanning targets, and avoid scanning other 7 non-existed targets for single target device. Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21usb: Create link files between child device and usb port device.Lan Tianyu
To show the relationship between usb port and child device, add link file "port" under usb device's sysfs directoy and "device" under usb port device's sysfs directory. They are linked to each other. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21usb: Add "portX/connect_type" attribute to expose usb port's connect typeLan Tianyu
Some platforms provide usb port connect types through ACPI. This patch is to add this new attribute to expose these information to user space. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21usb: fix compilation error and warning of driver/usb/core/port.c on arm and ↵Lan Tianyu
blackfin This patch is to fix compilation error and warning on the arm and blackfin. Add linux/slab.h head file to driver/usb/core/port.c. These are reported from 0-DAY kernel build testing backend. head: 6e30d7cba992d626c9d16b3873a7b90c700d0e95 commit: 6e30d7cba992d626c9d16b3873a7b90c700d0e95 [26/26] usb: Add driver/usb/core/(port.c,hub.h) files config: make ARCH=arm at91_dt_defconfig All error/warnings: drivers/usb/core/port.c: In function 'usb_port_device_release': >> drivers/usb/core/port.c:25:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] drivers/usb/core/port.c: In function 'usb_hub_create_port_device': >> drivers/usb/core/port.c:38:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] >> drivers/usb/core/port.c:38:40: error: 'GFP_KERNEL' undeclared (first use in this function) drivers/usb/core/port.c:38:40: note: each undeclared identifier is reported only once for each function it appears in cc1: some warnings being treated as errors head: 6e30d7cba992d626c9d16b3873a7b90c700d0e95 commit: 6e30d7cba992d626c9d16b3873a7b90c700d0e95 [26/26] usb: Add driver/usb/core/(port.c,hub.h) files config: make ARCH=blackfin BF526-EZBRD_defconfig All warnings: drivers/usb/core/port.c: In function 'usb_port_device_release': drivers/usb/core/port.c:25:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration] drivers/usb/core/port.c: In function 'usb_hub_create_port_device': drivers/usb/core/port.c:38:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] >> drivers/usb/core/port.c:38:11: warning: assignment makes pointer from integer without a cast [enabled by default] cc1: some warnings being treated as errors Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18usb: Add driver/usb/core/(port.c,hub.h) filesLan Tianyu
This patch is to create driver/usb/core/(port.c,hub.h) files and move usb port related code into port.c. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18USB: c67x00-ll-hpi.c: signedness bug in ll_recv_msg()Dan Carpenter
The callers expect this function to return zero on success or -EIO if it times out. The type should be int instead of unsigned short. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18USB: io_ti: kill custom closing_wait implementationJohan Hovold
Kill custom closing_wait implementation and let the tty layer handle it instead. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18USB: io_ti: query hardware-buffer status in chars_in_bufferJohan Hovold
Query hardware-buffer status in chars_in_buffer should the write fifo be empty. This is needed to make the tty layer wait for hardware buffers to drain on close. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18USB: serial: grab disconnect mutex in chars_in_bufferJohan Hovold
Grab disconnect mutex in chars_in_buffer before checking disconnected flag or calling driver specific function. This allows subdrivers to query any hardware buffer status without having to handle the locking themselves. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18USB: io_ti: use tty-port drain delayJohan Hovold
Use tty-port drain delay rather than custom implementation in chase_port. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18USB: io_ti: move write-fifo flushing to closeJohan Hovold
Move write-fifo flushing from chase_port to close where it belongs. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18Merge 3.8-rc4 into usb-nextGreg Kroah-Hartman
This pulls in all of the -rc4 fixes into usb-next to sync things up. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: misc: fixup smatch WARNINGDongjin Kim
This patch fixes the warning, 6a099c63650e50ebf7d1259b859a3d230aec4207 [4/10] USB: misc: Add USB3503 High-Speed Hub Controller drivers/usb/misc/usb3503.c:238 usb3503_probe() error: we previously assumed 'pdata' could be null (see line 196) Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17usb: misc: usb3503_probe() can be staticFengguang Wu
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-14Merge tag 'usb-3.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of USB fixes for your 3.8-rc3 tree. They all either fix problems that have been reported (like the xhci/hub changes) or add new device ids to existing drivers. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits) usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid added usb: host: ohci-tmio: fix compile warning USB: Add device quirk for Microsoft VX700 webcam USB: ehci-fsl: fix regression on mpc5121e usb: chipidea: Allow disabling streaming not only in udc mode USB: fsl-mph-dr-of: fix regression on mpc5121e USB: select USB_ARCH_HAS_EHCI for MXS USB: hub: handle claim of enabled remote wakeup after reset USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i" USB: option: add Nexpring NP10T terminal id USB: option: add Telekom Speedstick LTE II USB: option: blacklist network interface on ZTE MF880 usb: imx21-hcd: Include missing linux/module.h USB: option: Add new MEDIATEK PID support USB: ehci: make debug port in-use detection functional again USB: usbtest: fix test number in log message xhci: Avoid "dead ports", add roothub port polling. USB: Handle warm reset failure on empty port. USB: Ignore port state until reset completes. USB: Increase reset timeout. ...
2013-01-13usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid addedTomasz Mloduchowski
Simple fix to add support for Crucible Technologies COMET Caller ID USB decoder - a device containing FTDI USB/Serial converter chip, handling 1200bps CallerID messages decoded from the phone line - adding correct USB PID is sufficient. Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8 and 3.8.0-rc3 on both amd64 and x86 arches. Signed-off-by: Tomasz Mloduchowski <q@qdot.me> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12usb: host: ohci-tmio: fix compile warningFelipe Balbi
Fix the following compile warning: In file included from drivers/usb/host/ohci-hcd.c:1170:0: drivers/usb/host/ohci-tmio.c: In function 'tmio_start_hc': drivers/usb/host/ohci-tmio.c:130:2: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] seen on ARM 32-bit builds. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12USB: ehci-mxc: remove Efika MX-specific CHRGVBUS hackMatt Sealey
Since Efika MX platform support (pre-devicetree) was removed from the tree this code no longer has any possibility of running and clutters up the driver which is being replaced by the chipidea host in the future anyway. Signed-off-by: Matt Sealey <matt@genesi-usa.com> Tested-by: Steev Klimazewski <steev@genesi-usa.com> CC: Sascha Hauer <kernel@pengutronix.de> CC: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12usb/core: update power budget for SuperSpeedSebastian Andrzej Siewior
Sarah pointed out that the USB3.0 spec also updates the amount of power that may be consumed by the device and quoted 9.2.5.1: |"The amount of current draw for SuperSpeed devices are increased to 150 |mA for low-power devices and 900 mA for high-power" This patch tries to update all users to use the larger values for SuperSpeed devices and use the "old" ones for everything else. While here, two other changes suggested by Alan: - the comment referering to 7.2.1.1 has been updated to 7.2.1 which is the correct source of the action. - the check for hubs with zero ports has been removed. - compute bus power by full_load * num_ports on root hubs Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12usb/core: consider link speed while looking at bMaxPowerSebastian Andrzej Siewior
The USB 2.0 specification says that bMaxPower is the maximum power consumption expressed in 2 mA units and the USB 3.0 specification says that it is expressed in 8 mA units. This patch adds a helper function usb_get_max_power() which computes the value based on config & usb_device's speed value. The the device descriptor dump computes the value on its own. Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12USB: ohci: set urb->hcpriv = NULL immediately, after free itChen Gang
although we can not say it is surely a bug. it is better to set urb->hcpriv = NULL, after finish calling urb_free_priv. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12usb: serial: keyspan: fixed coding style issuesStefan Hubner
fixed coding style issues. Signed-off-by: Stefan Hubner <s.hubner@tilburguniversity.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12USB: Add device quirk for Microsoft VX700 webcamAndreas Fleig
Add device quirk for Microsoft Lifecam VX700 v2.0 webcams. Fixes squeaking noise of the microphone. Signed-off-by: Andreas Fleig <andreasfleig@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12USB: ehci-fsl: fix regression on mpc5121eAnatolij Gustschin
mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... Machine check in kernel mode. Caused by (from SRR1=49030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC5121 ADS Modules linked in: NIP: c025fd60 LR: c0265bb4 CTR: 00000000 REGS: df82dac0 TRAP: 0200 Not tainted (3.7.0-rc7-00641-g81e6c91) MSR: 00049030 <EE,ME,IR,DR> CR: 42002024 XER: 20000000 TASK = df824b70[1] 'swapper' THREAD: df82c000 GPR00: 00000000 df82db70 df824b70 df3ed0f0 00000003 00000000 00000000 00000000 GPR08: 00000020 32000000 c03550ec 20000000 22002028 00000000 c0003f5c 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0423898 c0450000 GPR24: 00000077 00000002 e5086180 1c000c00 e5086000 df33ec00 00000003 df34e000 NIP [c025fd60] ehci_fsl_setup_phy+0xd0/0x354 LR [c0265bb4] ehci_fsl_setup+0x220/0x284 ... Fix it by checking 'have_sysif_regs' flag before register access. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12usb: chipidea: Allow disabling streaming not only in udc modeFabio Estevam
When running a scp transfer using a USB/Ethernet adapter the following crash happens: $ scp test.tar.gz fabio@192.168.1.100:/home/fabio fabio@192.168.1.100's password: test.tar.gz 0% 0 0.0KB/s --:-- ETA ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0() NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out Modules linked in: Backtrace: [<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c) r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0 [<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>] (warn_slowpath_common+0x54/0x6c) [<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>] (warn_slowpath_fmt+0x38/0x40) ... Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem. However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode, so allow disabling streaming also in host mode. Tested on a mx6qsabrelite board. Suggested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12USB: fsl-mph-dr-of: fix regression on mpc5121eAnatolij Gustschin
fsl-ehci probing fails on mpc5121e: ... ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: Could not get controller version fsl-ehci fsl-ehci.0: can't setup fsl-ehci fsl-ehci.0: USB bus 1 deregistered fsl-ehci fsl-ehci.0: init fsl-ehci.0 fail, -22 fsl-ehci: probe of fsl-ehci.0 failed with error -22 Fix it by returning appropriate version info for mpc5121, too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-12USB: select USB_ARCH_HAS_EHCI for MXSMaxime Ripard
Commit 09f6ffde (USB: EHCI: fix build error by making ChipIdea host a normal EHCI driver) introduced a dependency on USB_EHCI_HCD for the chipidea USB host driver, that in turns depends on USB_ARCH_HAS_EHCI. If this symbol is not set for MXS, the MXS boards are not able to use the chipidea driver anymore. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: hub: handle claim of enabled remote wakeup after resetOliver Neukum
Some touchscreens have buggy firmware which claims remote wakeup to be enabled after a reset. They nevertheless crash if the feature is cleared by the host. Add a check for reset resume before checking for an enabled remote wakeup feature. On compliant devices the feature must be cleared after a reset anyway. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11uas: fail any request submitted while resetting the device.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11uas: improve device resetGerd Hoffmann
Add new function to unlink and abort requests from the work list, call it on bus reset and disconnect where we kill all in-flight urbs. Also reorder calls in disconnect to first cancel transfers, then remove the scsi hba. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11uas: improve abort handlerGerd Hoffmann
Two changes. First we check whenever the request is linked in the work list and if so take it out. Second check whenever the command is actually in flight before asking the device to cancel it via task management, and in case it isn't just zap the data urbs and finish it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11uas: add IS_IN_WORK_LIST flagGerd Hoffmann
Keep track whenever the request is linked into the work list or not. Needed for request abort. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11uas: add UNLINK_DATA_URBS flagGerd Hoffmann
uas_unlink_data_urbs uses this to make sure the the scsi command is not released while looking at it. This will be needed when we start calling uas_unlink_data_urbs in the request cancel code paths. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11uas: new function to cancel data urbsGerd Hoffmann
Add uas_unlink_data_urbs function to cancel in-flight data urbs. Moves existing code into a separate function. [ v2: also drop the locking, just call usb_unlink_urb no matter what, which is safe because the usb core guarantees the completion callback is called only once ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: misc: Add USB3503 High-Speed Hub ControllerDongjin Kim
This patch adds new driver of SMSC USB3503 USB 2.0 hub controller with HSIC upstream connectivity and three USB 2.0 downstream ports. The specification can be found from 'http://www.smsc.com/index.php?tid=295&pid=325'. The current version have been tested very basic features switching the modes, HUB-MODE and STANDBY-MODE. Signed-off-by: Dongjin Kim <tobetter@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: cdc-acm: Add support for "PSC Scanning, Magellan 800i"Denis N Ladin
Adding support "PSC Scanning, Magellan 800i" in cdc-acm Very simple, but very necessary. Suitable for all versions of the kernel > 2.6 Signed-off-by: Denis N Ladin <denladin@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: add Nexpring NP10T terminal idDzianis Kahanovich
Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID Signed-off-by: Denis Kaganovich <mahatma@eu.by> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: add Telekom Speedstick LTE IIBjørn Mork
also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: blacklist network interface on ZTE MF880Bjørn Mork
The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11usb: imx21-hcd: Include missing linux/module.hFabio Estevam
Include <linux/module.h>, so that the following errors are fixed: drivers/usb/host/imx21-hcd.c:1929:20: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1930:15: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1931:16: error: expected declaration specifiers or '...' before string constant drivers/usb/host/imx21-hcd.c:1932:14: error: expected declaration specifiers or '...' before string constant Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11USB: option: Add new MEDIATEK PID supportQuentin.Li
In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This is a MEDIATEK inc. release patch. Signed-off-by: Quentin.Li <snowmanli88@163.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07USB: ehci: make debug port in-use detection functional againJan Beulich
Debug port in-use determination must be done before the controller gets reset the first time, i.e. before the call to ehci_setup() as of commit 1a49e2ac9651df7349867a5cf44e2c83de1046af. That commit effectively rendered commit 9fa5780beea1274d498a224822397100022da7d4 useless. While moving that code around, also fix the BAR determination - the respective capability field is a 3- rather than a 2-bit one -, and use PCI_CAP_ID_DBG instead of the literal 0x0a. It's unclear to me whether the debug port functionality is important enough to warrant fixing this in stable kernels too. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07USB: usbtest: fix test number in log messageAlan Stern
This patch (as1639) fixes a minor bug in the usbtest driver. Due to concurrent changes, a test originally written as number 17 got changed to number 24, but the corresponding change was not made in the log message. This updates the log message. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07Merge tag 'for-usb-next-2013-01-03' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: usb-next: Further warm reset improvements Hi Greg, Here's some patches for 3.9. They further improve the warm reset error handling, but they're too big to go into stable. There's also a patch to remove an unused variable in the xHCI driver. As I mentioned, you'll need to merge usb-linus into usb-next before applying these patches. Sarah Sharp
2013-01-07Merge tag 'for-usb-linus-2013-01-03' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Sarah says: usb-linus: USB core fixes for warm reset Hi Greg, Happy New Year! Here's some bug fixes for 3.8. I have usb-next patches that are based on this set, so please merge your usb-linus branch into usb-next after this set is applied. The bulk of the patchset (patches 2-7) improve the USB core's warm reset error handling. There's also one patch that fixes an arithmetic error in the xHCI driver, and another to avoid the "dead ports" issue caused by unhandled port status change events. These are all marked for stable. Sarah Sharp
2013-01-07Merge tag 'fixes-for-v3.8-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe says: usb: fixes for v3.8-rc2 Here is the first set of fixes for v3.8-rc cycle. There is a build fix for musb's dsps glue layer caused by some header cleanup on the OMAP tree. Marvel's USB drivers got a fix up for clk API usage switching over to clk_prepare() calls. u_serial has a bug fix for a missing wake_up() which would make gs_cleanup() wait forever for gs_close() to finish. A minor bug fix on dwc3's debugfs interface which would make us read wrong addresses when dumping all registers. dummy_hcd learned how to enumerate g_multi. s3c-hsotg now understands that we shouldn't kfree() memory allocated with devm_*. Other than that, there are a bunch of other minor fixes on renesas_usbhs, tcm_usb_gadget and amd5536udc. All patches have been pending on mailing for many weeks and shouldn't cause any problems.
2013-01-03Drivers: usb: host: ehci-orion.c: remove __devinitdata markingGreg Kroah-Hartman
This snuck in from a different tree during the merge and needs to be removed. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03usb: host: xhci: remove unused trb var in xhci_irq()Javier Martinez Canillas
The union xhci_trb *trb variable is defined and assigned inside the xHCI IRQ handler function but is never used. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
generated by cgit v0.10.2 at 2024-11-18 05:36:47 (GMT)