summaryrefslogtreecommitdiff
path: root/drivers/w1
AgeCommit message (Collapse)Author
2013-01-03Drivers: w1: remove last __devexit_p() instanceGreg Kroah-Hartman
This slipped in through the merging of different trees. Remove __devexit_p() use in the mxc_w1 driver. Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-16ARM: OMAP: Fix drivers to depend on omap for internal devicesTony Lindgren
These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-27w1-gpio: Simplify & get rid of definesPantelis Antoniou
There's no reason to have the OF defines; it complicates the driver. There's also no need for the funky platform_driver_probe. Add a few warnings in case there's a failure; helps us find out what went wrong. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27w1-gpio: Pinctrl-fyPantelis Antoniou
Enable pinctrl for w1-gpio. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21w1: remove CONFIG_HOTPLUG ifdefsBill Pemberton
Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21w1: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21w1: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21w1: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21w1: mxc_w1: Fix commentFabio Estevam
We are dealing with mxc_w1 registers. While at it use dev_err() instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21w1: mxc_w1: Convert to platform driverFabio Estevam
Using module_platform_driver() makes the code smaller and cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21w1: mxc_w1: Adapt the clock name to the new clock frameworkFabio Estevam
With the new i.mx clock framework the mxc_w1 clock is registered as: clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); So we do not need to pass "owire" string and can use NULL instead. While at it, also fix the clock error handling code. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> ----- Changes since v2: - Add Ack's Changes since v1: - Fix clock error handling drivers/w1/masters/mxc_w1.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24w1/ds2482: use module_i2c_driver to simplify the codeWei Yongjun
Use the module_i2c_driver() macro to make the code smaller and a bit simpler. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24drivers/w1/masters: remove CONFIG_EXPERIMENTALKees Cook
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Andrew Morton <akpm@linux-foundation.org> CC: Paul Walmsley <paul@pwsan.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-01Merge tag 'char-misc-3.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver merge from Greg Kroah-Hartman: "Here is the "big" char/misc driver tree update for the 3.7-rc1 merge window. Nothing major, just a number of driver updates and fixes, all of which have been in the linux-next releases for a while now either in my tree, or in Andrew's (the lis3l driver changes came from his tree last week). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (52 commits) drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree init drivers/misc/lis3lv02d: remove lis3lv02d driver DT init drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code drivers/misc/lis3lv02d: add generic DT matching code lis3lv02d: fix some comments specific to lis331dlh driver MISC: hpilo, remove pci_disable_device pcmcia: synclink_cs: fix potential tty NULL dereference drivers/char/mmtimer.c: Remove useless kfree drivers/char: removes unnecessary semicolon char/misc: remove CONFIG_EXPERIMENTAL dependencies mei: don't print buffer as a string mei: struct mei_message_data doesn't have to be packed mei: add error messages for open count errors misc: use module_spi_driver tifm: use module_pci_driver misc/at25, dt: Improve at25 SPI eeprom device tree bindings. mei: add lynx point pci device ids mei: fix max number of open handles mei: rename struct pci_dev *mei_device to mei_pdev ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-01treewide: fix comment/printk/variable typosAnatol Pomozov
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-08-27Merge v3.6-rc3 into 'char-misc-next'Greg Kroah-Hartman
This resolves a conflict in: drivers/misc/mei/interrupt.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-161-Wire: Add support for the maxim ds1825 temperature sensorRaphael Assenat
This patch adds support for maxim ds1825 based 1-wire temperature sensors. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16onewire: w1-gpio: add ext_pullup_enable pin in platform dataDaniel Mack
In the process of porting boards to devicetree implemenation, we should keep information about external circuitry where they belong - the individual drivers. This patch adds a way to specify a GPIO to drive the (optional) external pull-up logic, rather than using a function pointer for that. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16onewire: w1-gpio: add DT bindingsDaniel Mack
This patch add DT bindings to the w1-gpio driver, along with some documentation on how to use them. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16w1: omap-hdq: drop ARCH dependencyFelipe Balbi
Let the driver compile everywhere while also removing unnecessary headers. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16w1: omap-hdq: remove unnecessary returnFelipe Balbi
trivial patch, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16w1: omap-hdq: convert to devm_* functionsFelipe Balbi
this lets us remove a bit of boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16w1: omap-hdq: convert to module_platform_driverFelipe Balbi
trivial patch, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16w1: omap-hdq: don't hardcode resource sizeFelipe Balbi
we have the helpful resource_size() macro to calculate the size of the memory resource for us, let's use it. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16w1: omap-hdq: add section annotation to removeFelipe Balbi
trivial patch, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26Merge tag 'driver-core-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg Kroah-Hartman: "Here's the big driver core pull request for 3.6-rc1. Unlike 3.5, this kernel should be a lot tamer, with the printk changes now settled down. All we have here is some extcon driver updates, w1 driver updates, a few printk cleanups that weren't needed for 3.5, but are good to have now, and some other minor fixes/changes in the driver core. All of these have been in the linux-next releases for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) printk: Export struct log size and member offsets through vmcoreinfo Drivers: hv: Change the hex constant to a decimal constant driver core: don't trigger uevent after failure extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device sysfs: fail dentry revalidation after namespace change fix sysfs: fail dentry revalidation after namespace change extcon: spelling of detach in function doc extcon: arizona: Stop microphone detection if we give up on it extcon: arizona: Update cable reporting calls and split headset PM / Runtime: Do not increment device usage counts before probing kmsg - do not flush partial lines when the console is busy kmsg - export "continuation record" flag to /dev/kmsg kmsg - avoid warning for CONFIG_PRINTK=n compilations kmsg - properly print over-long continuation lines driver-core: Use kobj_to_dev instead of re-implementing it driver-core: Move kobj_to_dev from genhd.h to device.h driver core: Move deferred devices to the end of dpm_list before probing driver core: move uevent call to driver_register driver core: fix shutdown races with probe/remove(v3) Extcon: Arizona: Add driver for Wolfson Arizona class devices ...
2012-06-22W1: OMAP HDQ1W: use runtime PMPaul Walmsley
Convert the OMAP HDQ driver to use runtime PM. Compile- and boot-tested, but not tested in actual use. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Tested-by: NeilBrown <neilb@suse.de>
2012-06-22W1: OMAP HDQ1W: use 32-bit register accessesPaul Walmsley
HDQ/1-wire registers are 32 bits long, even if the register contents fit into 8 bits, so accesses must be 32-bit aligned. Evidently the OMAP2/3 interconnects allowed the driver to get away with 8 bit accesses, but the OMAP4 puts a stop to that: [ 1.488800] Driver for 1-wire Dallas network protocol. [ 1.495025] Bad mode in data abort handler detected [ 1.500122] Internal error: Oops - bad mode: 0 [#1] SMP [ 1.505615] Modules linked in: [ 1.508819] CPU: 0 Not tainted (3.3.0-rc1-00008-g45030e9 #992) [ 1.515289] PC is at 0xffff0018 [ 1.518615] LR is at omap_hdq_probe+0xd4/0x2cc The OMAP4430 ES2 Rev X TRM does warn about this restriction in section 23.2.6.2 "HDQ/1-Wire Registers". Fixes the crash on OMAP4430 ES2 Pandaboard. Tested also on OMAP34xx and OMAP2420; it seems to work fine on those chips, although due to the lack of boards with HDQ/1-wire devices here, a more indepth test was not possible. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
2012-06-22W1: OMAP HDQ1W: allow driver to be built on all OMAP2+Paul Walmsley
Allow the OMAP HDQ1W driver to be built for all OMAP2+ SoCs by adjusting KConfig dependencies. The previous dependency required either SOC_OMAP2430 or ARCH_OMAP3 to be set, but the HDQ IP block is present on OMAP2420 and OMAP44xx SoCs. The driver was still selectable on multi-OMAP kernel configurations, however; so the previous prohibition was rather pointless. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
2012-06-18w1: Fix a typo in 'hardware' wordOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13w1: Add 1-wire slave device driver for DS28E04-100Markus Franke
Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13W1: split master mutex to avoid deadlocks.NeilBrown
The 'mutex' in struct w1_master is use for two very different purposes. Firstly it protects various data structures such as the list of all slaves. Secondly it protects the w1 buss against concurrent accesses. This can lead to deadlocks when the ->probe code called while adding a slave needs to talk on the bus, as is the case for power_supply devices. ds2780 and ds2781 drivers contain a work around to track which process hold the lock simply to avoid this deadlock. bq27000 doesn't have that work around and so deadlocks. There are other possible deadlocks involving sysfs. When removing a device the sysfs s_active lock is held, so the lock that protects the slave list must take precedence over s_active. However when access power_supply attributes via sysfs, the s_active lock must take precedence over the lock that protects accesses to the bus. So to avoid deadlocks between w1 slaves and sysfs, these must be two separate locks. Making them separate means that the work around in ds2780 and ds2781 can be removed. So this patch: - adds a new mutex: "bus_mutex" which serialises access to the bus. - takes in mutex in w1_search and ds1wm_search while they access the bus for searching. The mutex is dropped before calling the callback which adds the slave. - changes all slaves to use bus_mutex instead of mutex to protect access to the bus - removes w1_ds2790_io_nolock and w1_ds2781_io_nolock, and the related code from drivers/power/ds278[01]_battery.c which calls them. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13w1: omap_hdq: use wait_event_timeout to wait for read to complete.NeilBrown
There is no gain in having a loop - there is no risk of missing the interrupt with wait_event_timeout. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13w1: omap_hdq: Fix some error/debug handling.NeilBrown
- some debug messages missed spaces - sometimes no error was returned when it should have been - sometimes a message is printed when there is no error, rather than when there is one. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13Revert "w1: introduce a slave mutex for serializing IO"Greg Kroah-Hartman
This reverts commit 59d4467be405316916a4087d5b02d99196eeef04. Turns out it was the wrong version, will apply the correct version after this. Reported-by: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12w1: cleanup w1_ueventDevendra Naga
There were some return statements around in the w1_uevent, used goto to cleanup those return statements with the help of err variable, and also removed a semi colon at the end of the w1_uevent's closing brace. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12w1: introduce a slave mutex for serializing IONeilBrown
w1 devices need a mutex to serial IO. Most use master->mutex. However that is used for other purposes and they can conflict. In particular master->mutex is held while w1_attach_slave_device is called. For bq27000, this registers a 'powersupply' device which tries to read the current status. The attempt to read will cause a deadlock on master->mutex. So create a new per-slave mutex and use that for serializing IO for bq27000. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-07Kconfig: replace "--- help ---" with "---help---"Paul Bolle
There are three Kconfig entries with "--- help ---" attributes, and over 2000 Kconfig entries with "---help---" attributes. Apparently the three attributes with embedded spaces are valid. Still, I see little reason for using this obscure variant. And replacing those three attributes with the common variant makes grepping Kconfig files for help texts a bit easier too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-04w1: w1_ds2408.c: quite sparse noise about using plaing integer as NULL pointerH Hartley Sweeten
NULL not 0 should be used with pointers. Just remove the offending lines since they will default to NULL anyway. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30Revert "w1: Add 1-wire slave device driver for DS28E04-100"Greg Kroah-Hartman
This reverts commit f19420c1acb0b573c88a12deb2d42035e22d4a17. It contained lots of errors and warnings and shouldn't have ever been applied, that was my fault, sorry. Cc: Markus Franke <markus.franke@s2002.tu-chemnitz.de> Cc: Evgeniy Polyakov <zbr@ioremap.net>, Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25w1 i.MX: prepare/unprepare clockSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18w1: w1_ds28e04: unlock on error path in w1_f1C_write_pio()Dan Carpenter
We should unlock here before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11w1: Disable irqs during 1-wire bus operations, extend 1-wire reset pulseMarkus Franke
This patch offers the possibility to disables irqs during w1_write_bit() and w1_reset_bus() operations as timing requirements are very strict for the 1-wire bus protocol. Per default interrupts are enabled but can be disabled via the module parameter "w1_disable_irqs". Extend 1-wire reset pulse length from 480us to 500us as 480us is the minimum requirement for the 1-wire reset/presence pulse. Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11w1: Add 1-wire slave device driver for DS28E04-100Markus Franke
This patch adds a 1-wire slave device driver for the DS28E04-100. Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09w1: fix slave driver registration error messageDmitry Artamonow
W1 core prints "Failed to register master driver" if error happens on registering SLAVE driver. Fix it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-08Merge branch 'master' into for-nextJiri Kosina
Merge with latest Linus' tree, as I have incoming patches that fix code that is newer than current HEAD of for-next. Conflicts: drivers/net/ethernet/realtek/r8169.c
2012-04-03w1: fix slave driver registration error messageDmitry Artamonow
W1 core prints "Failed to register master driver" if error happens on registering SLAVE driver. Fix it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>