summaryrefslogtreecommitdiff
path: root/drivers/xen/xen-pciback
AgeCommit message (Collapse)Author
2012-12-13Merge tag 'stable/for-linus-3.8-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen updates from Konrad Rzeszutek Wilk: - Add necessary infrastructure to make balloon driver work under ARM. - Add /dev/xen/privcmd interfaces to work with ARM and PVH. - Improve Xen PCIBack wild-card parsing. - Add Xen ACPI PAD (Processor Aggregator) support - so can offline/ online sockets depending on the power consumption. - PVHVM + kexec = use an E820_RESV region for the shared region so we don't overwrite said region during kexec reboot. - Cleanups, compile fixes. Fix up some trivial conflicts due to the balloon driver now working on ARM, and there were changes next to the previous work-arounds that are now gone. * tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/PVonHVM: fix compile warning in init_hvm_pv_info xen: arm: implement remap interfaces needed for privcmd mappings. xen: correctly use xen_pfn_t in remap_domain_mfn_range. xen: arm: enable balloon driver xen: balloon: allow PVMMU interfaces to be compiled out xen: privcmd: support autotranslated physmap guests. xen: add pages parameter to xen_remap_domain_mfn_range xen/acpi: Move the xen_running_on_version_or_later function. xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h xen/acpi: Fix compile error by missing decleration for xen_domain. xen/acpi: revert pad config check in xen_check_mwait xen/acpi: ACPI PAD driver xen-pciback: reject out of range inputs xen-pciback: simplify and tighten parsing of device IDs xen PVonHVM: use E820_Reserved area for shared_info
2012-11-19treewide: fix printk typo in multiple driversMasanari Iida
Correct spelling typo in multiple drivers. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-02xen-pciback: reject out of range inputsJan Beulich
This add checks for out of range numbers (including in cases where the folding of slot and function into a single value could yield false matches). It also removes the bogus field width restrictions in str_to_quirk() - nowhere else in the driver this is being done, and hence this function could reject input the equivalent of which would be happily accepted in other places (in particular, "0x" prefixes causing the effective width of the actual number to be either zero or less than what would be required to cover the full range of valid values). Note that for the moment this second part is cosmetic only, as the kernel's sscanf() currently ignores the field widths, but a patch to overcome this is on its way. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-02xen-pciback: simplify and tighten parsing of device IDsJan Beulich
Now that at least one of the conformance problems of the kernel's sscanf() was addressed (commit da99075c1d368315e1508b6143226c0d27b621e0), we can improve the parsing done in xen-pciback both in terms of code readability and correctness (in particular properly rejecting input strings not well formed). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-19Merge commit 'v3.7-rc1' into stable/for-linus-3.7Konrad Rzeszutek Wilk
* commit 'v3.7-rc1': (10892 commits) Linux 3.7-rc1 x86, boot: Explicitly include autoconf.h for hostprogs perf: Fix UAPI fallout ARM: config: make sure that platforms are ordered by option string ARM: config: sort select statements alphanumerically UAPI: (Scripted) Disintegrate include/linux/byteorder UAPI: (Scripted) Disintegrate include/linux UAPI: Unexport linux/blk_types.h UAPI: Unexport part of linux/ppp-comp.h perf: Handle new rbtree implementation procfs: don't need a PATH_MAX allocation to hold a string representation of an int vfs: embed struct filename inside of names_cache allocation if possible audit: make audit_inode take struct filename vfs: make path_openat take a struct filename pointer vfs: turn do_path_lookup into wrapper around struct filename variant audit: allow audit code to satisfy getname requests from its names_list vfs: define struct filename and have getname() return it btrfs: Fix compilation with user namespace support enabled userns: Fix posix_acl_file_xattr_userns gid conversion userns: Properly print bluetooth socket uids ...
2012-10-19xen PV passthru: assign SR-IOV virtual functions to separate virtual slotsLaszlo Ersek
VFs are reported as single-function devices in PCI_HEADER_TYPE, which causes pci_scan_slot() in the PV domU to skip all VFs beyond #0 in the pciback-provided slot. Avoid this by assigning each VF to a separate virtual slot. Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-03Merge tag 'stable/for-linus-3.7-x86-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "Features: - When hotplugging PCI devices in a PV guest we can allocate Xen-SWIOTLB later. - Cleanup Xen SWIOTLB. - Support pages out grants from HVM domains in the backends. - Support wild cards in xen-pciback.hide=(BDF) arguments. - Update grant status updates with upstream hypervisor. - Boot PV guests with more than 128GB. - Cleanup Xen MMU code/add comments. - Obtain XENVERS using a preferred method. - Lay out generic changes to support Xen ARM. - Allow privcmd ioctl for HVM (used to do only PV). - Do v2 of mmap_batch for privcmd ioctls. - If hypervisor saves the LED keyboard light - we will now instruct the kernel about its state. Fixes: - More fixes to Xen PCI backend for various calls/FLR/etc. - With more than 4GB in a 64-bit PV guest disable native SWIOTLB. - Fix up smatch warnings. - Fix up various return values in privmcmd and mm." * tag 'stable/for-linus-3.7-x86-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (48 commits) xen/pciback: Restore the PCI config space after an FLR. xen-pciback: properly clean up after calling pcistub_device_find() xen/vga: add the xen EFI video mode support xen/x86: retrieve keyboard shift status flags from hypervisor. xen/gndev: Xen backend support for paged out grant targets V4. xen-pciback: support wild cards in slot specifications xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer. xen/swiotlb: Remove functions not needed anymore. xen/pcifront: Use Xen-SWIOTLB when initting if required. xen/swiotlb: For early initialization, return zero on success. xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used. xen/swiotlb: Move the error strings to its own function. xen/swiotlb: Move the nr_tbl determination in its own function. xen/arm: compile and run xenbus xen: resynchronise grant table status codes with upstream xen/privcmd: return -EFAULT on error xen/privcmd: Fix mmap batch ioctl error status copy back. xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl xen/mm: return more precise error from xen_remap_domain_range() xen/mmu: If the revector fails, don't attempt to revector anything else. ...
2012-09-25xen/pciback: Restore the PCI config space after an FLR.Konrad Rzeszutek Wilk
When we do an FLR, or D0->D3_hot we may lose the BARs as the device has turned itself off (and on). This means the device cannot function unless the pci_restore_state is called - which it is when the PCI device is unbound from the Xen PCI backend driver. For PV guests it ends up calling pci_enable_device / pci_enable_msi[x] which does the proper steps That however is not happening if a HVM guest is run as QEMU deals with PCI configuration space. QEMU also requires that the device be "parked" under the ownership of a pci-stub driver to guarantee that the PCI device is not being used. Hence we follow the same incantation as pci_reset_function does - by doing an FLR, then restoring the PCI configuration space. The result of this patch is that when you run lspci, you get now this: - Region 0: [virtual] Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K] - Region 1: [virtual] Memory at fe800000 (32-bit, non-prefetchable) [size=512K] + Region 0: Memory at fe8c0000 (32-bit, non-prefetchable) [size=128K] + Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at c000 [size=32] - Region 3: [virtual] Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K] + Region 3: Memory at fe8e0000 (32-bit, non-prefetchable) [size=16K] The [virtual] means that lspci read those entries from SysFS but when it read them from the device it got a different value (0xfffffff). CC: stable@vger.kernel.org #only for 3.5, 3.6 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-25xen-pciback: properly clean up after calling pcistub_device_find()Jan Beulich
As the function calls pcistub_device_get() before returning non-NULL, its callers need to take care of calling pcistub_device_put() on (mostly, but not exclusively) error paths. Otoh, the function already guarantees that the 'dev' member is non-NULL upon successful return, so callers do not need to check for this a second time. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-18xen-pciback: support wild cards in slot specificationsJan Beulich
Particularly for hiding sets of SR-IOV devices, specifying them all individually is rather cumbersome. Therefore, allow function and slot numbers to be replaced by a wildcard character ('*'). Unfortunately this gets complicated by the in-kernel sscanf() implementation not being really standard conformant - matching of plain text tails cannot be checked by the caller (a patch to overcome this will be sent shortly, and a follow-up patch for simplifying the code is planned to be sent when that fixed went upstream). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-09-07make drivers with pci error handlers constStephen Hemminger
Covers the rest of the uses of pci error handler. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-06xen/pciback: Fix proper FLR steps.Konrad Rzeszutek Wilk
When we do FLR and save PCI config we did it in the wrong order. The end result was that if a PCI device was unbind from its driver, then binded to xen-pciback, and then back to its driver we would get: > lspci -s 04:00.0 04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 13:42:12 # 4 :~/ > echo "0000:04:00.0" > /sys/bus/pci/drivers/pciback/unbind > modprobe e1000e e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:04:00.0: Disabling ASPM L0s L1 e1000e 0000:04:00.0: enabling device (0000 -> 0002) xen: registering gsi 48 triggering 0 polarity 1 Already setup the GSI :48 e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e: probe of 0000:04:00.0 failed with error -2 This fixes it by first saving the PCI configuration space, then doing the FLR. Reported-by: Ren, Yongjie <yongjie.ren@intel.com> Reported-and-Tested-by: Tobias Geiger <tobias.geiger@vido.info> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: stable@vger.kernel.org
2012-06-12PCI: create common pcibios_err_to_errnoAlex Williamson
For returning errors out to non-PCI code. Re-name xen's version. Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-04-07Merge tag 'stable/for-linus-3.4-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm
2012-04-06xen/pciback: fix XEN_PCI_OP_enable_msix resultJan Beulich
Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a positive value to indicate the number of vectors (less than the amount requested) that can be set up for a given device. Returning this as an operation value (secondary result) is fine, but (primary) operation results are expected to be negative (error) or zero (success) according to the protocol. With the frontend fixed to match the XenoLinux behavior, the backend can now validly return zero (success) here, passing the upper limit on the number of vectors in op->value. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-23Merge tag 'stable/for-linus-3.4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen updates from Konrad Rzeszutek Wilk: "which has three neat features: - PV multiconsole support, so that there can be hvc1, hvc2, etc; This can be used in HVM and in PV mode. - P-state and C-state power management driver that uploads said power management data to the hypervisor. It also inhibits cpufreq scaling drivers to load so that only the hypervisor can make power management decisions - fixing a weird perf bug. There is one thing in the Kconfig that you won't like: "default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by default is off). I've a fix to convert that boolean expression into "default m" which I am going to post after the cpufreq git pull - as the two patches to make this work depend on a fix in Dave Jones's tree. - Function Level Reset (FLR) support in the Xen PCI backend. Fixes: - Kconfig dependencies for Xen PV keyboard and video - Compile warnings and constify fixes - Change over to use percpu_xxx instead of this_cpu_xxx" Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to a removed commit. * tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps xen/acpi-processor: C and P-state driver that uploads said data to hypervisor. xen: constify all instances of "struct attribute_group" xen/xenbus: ignore console/0 hvc_xen: introduce HVC_XEN_FRONTEND hvc_xen: implement multiconsole support hvc_xen: support PV on HVM consoles xenbus: don't free other end details too early xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it. xen/setup/pm/acpi: Remove the call to boot_option_idle_override. xenbus: address compiler warnings xen: use this_cpu_xxx replace percpu_xxx funcs xen/pciback: Support pci_reset_function, aka FLR or D3 support. pci: Introduce __pci_reset_function_locked to be used when holding device_lock. xen: Utilize the restore_msi_irqs hook.
2012-02-03xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn.Konrad Rzeszutek Wilk
.. as the rest of the kernel is using that format. Suggested-by: Марк Коренберг <socketpair@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-12module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12xen/pciback: Support pci_reset_function, aka FLR or D3 support.Konrad Rzeszutek Wilk
We use the __pci_reset_function_locked to perform the action. Also on attaching ("bind") and detaching ("unbind") we save and restore the configuration states. When the device is disconnected from a guest we use the "pci_reset_function" to also reset the device before being passed to another guest. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-09xen/pciback: Expand the warning message to include domain id.Konrad Rzeszutek Wilk
When a PCI device is transferred to another domain and it is still in usage (from the internal perspective), mention which other domain is using it to aid in debugging. [v2: Truncate the verbose message per Jan Beulich suggestion] [v3: Suggestions from Ian Campbell on the wording] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jan Beulich <jbeulich@suse.com>
2012-01-08xen/pciback: Fix "device has been assigned to X domain!" warningKonrad Rzeszutek Wilk
The full warning is: "pciback 0000:05:00.0: device has been assigned to 2 domain! Over-writting the ownership, but beware." which is correct - the previous domain that was using the device forgot to unregister the ownership. This patch fixes this by calling the unregister ownership function when the PCI device is relinquished from the guest domain. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-08xen/pciback: Move the PCI_DEV_FLAGS_ASSIGNED ops to the "[un|]bind"Konrad Rzeszutek Wilk
operation instead of doing it per guest creation/disconnection. Without this we could have potentially unloaded the vf driver from the xen pciback control even if the driver was binded to the xen-pciback. This will hold on to it until the user "unbind"s the PCI device using SysFS. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-04Xen: consolidate and simplify struct xenbus_driver instantiationJan Beulich
The 'name', 'owner', and 'mod_name' members are redundant with the identically named fields in the 'driver' sub-structure. Rather than switching each instance to specify these fields explicitly, introduce a macro to simplify this. Eliminate further redundancy by allowing the drvname argument to DEFINE_XENBUS_DRIVER() to be blank (in which case the first entry from the ID table will be used for .driver.name). Also eliminate the questionable xenbus_register_{back,front}end() wrappers - their sole remaining purpose was the checking of the 'owner' field, proper setting of which shouldn't be an issue anymore when the macro gets used. v2: Restore DRV_NAME for the driver name in xen-pciback. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-31xen: Add module.h to modular drivers/xen users.Paul Gortmaker
Previously these drivers just got module.h implicitly, but we are cleaning that up and it will be no longer. Call out the real users of it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-19xen/pciback: Check if the device is found instead of blindly assuming so.Konrad Rzeszutek Wilk
Just in case it is not found, don't try to dereference it. [v1: Added WARN_ON, suggested by Jan Beulich <JBeulich@suse.com>] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-10-19xen/pciback: Do not dereference psdev during printk when it is NULL.Konrad Rzeszutek Wilk
.. instead use BUG_ON() as all the callers of the kill_domain_by_device check for psdev. Suggested-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29xen/pciback: double lock typoDan Carpenter
We called mutex_lock() twice instead of unlocking. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-27xen/pciback: Add flag indicating device has been assigned by XenKonrad Rzeszutek Wilk
Device drivers that create and destroy SR-IOV virtual functions via calls to pci_enable_sriov() and pci_disable_sriov can cause catastrophic failures if they attempt to destroy VFs while they are assigned to guest virtual machines. By adding a flag for use by the Xen PCI back to indicate that a device is assigned a device driver can check that flag and avoid destroying VFs while they are assigned and avoid system failures. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21xen/pciback: use mutex rather than spinlock in vpci backendKonrad Rzeszutek Wilk
Similar to the "xen/pciback: use mutex rather than spinlock in passthrough backend" this patch converts the vpci backend to use a mutex instead of a spinlock. Note that the code taking the lock won't ever get called from non-sleepable context Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21xen/pciback: Use mutexes when working with Xenbus state transitions.Konrad Rzeszutek Wilk
The caller that orchestrates the state changes is xenwatch_thread and it takes a mutex. In our processing of Xenbus states we can take the luxery of going to sleep on a mutex, so lets do that and also fix this bug: BUG: sleeping function called from invalid context at /linux/kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 32, name: xenwatch 2 locks held by xenwatch/32: #0: (xenwatch_mutex){......}, at: [<ffffffff813856ab>] xenwatch_thread+0x4b/0x180 #1: (&(&pdev->dev_lock)->rlock){......}, at: [<ffffffff8138f05b>] xen_pcibk_disconnect+0x1b/0x80 Pid: 32, comm: xenwatch Not tainted 3.1.0-rc6-00015-g3ce340d #2 Call Trace: [<ffffffff810892b2>] __might_sleep+0x102/0x130 [<ffffffff8163b90f>] mutex_lock_nested+0x2f/0x50 [<ffffffff81382c1c>] unbind_from_irq+0x2c/0x1b0 [<ffffffff8110da66>] ? free_irq+0x56/0xb0 [<ffffffff81382dbc>] unbind_from_irqhandler+0x1c/0x30 [<ffffffff8138f06b>] xen_pcibk_disconnect+0x2b/0x80 [<ffffffff81390348>] xen_pcibk_frontend_changed+0xe8/0x140 [<ffffffff81387ac2>] xenbus_otherend_changed+0xd2/0x150 [<ffffffff810895c1>] ? get_parent_ip+0x11/0x50 [<ffffffff81387de0>] frontend_changed+0x10/0x20 [<ffffffff81385712>] xenwatch_thread+0xb2/0x180 Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21xen/pciback: miscellaneous adjustmentsJan Beulich
This is a minor bugfix and a set of small cleanups; as it is not clear whether this needs splitting into pieces (and if so, at what granularity), it is a single combined patch. - add a missing return statement to an error path in kill_domain_by_device() - use pci_is_enabled() rather than raw atomic_read() - remove a bogus attempt to zero-terminate an already zero-terminated string - #define DRV_NAME once uniformly in the shared local header - make DRIVER_ATTR() variables static - eliminate a pointless use of list_for_each_entry_safe() - add MODULE_ALIAS() - a little bit of constification - adjust a few messages - remove stray semicolons from inline function definitions Signed-off-by: Jan Beulich <jbeulich@suse.com> [v1: Dropped the resource_size fix, altered the description] [v2: Fixed cleanpatch.pl comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21xen/pciback: use mutex rather than spinlock in passthrough backendJan Beulich
To accommodate the call to the callback function from __xen_pcibk_publish_pci_roots(), which so far dropped and the re- acquired the lock without checking that the list didn't actually change, convert the code to use a mutex instead (observing that the code taking the lock won't ever get called from non-sleepable context). As a result, drop the bogus use of list_for_each_entry_safe() and remove the inappropriate dropping of the lock. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-21xen/pciback: use resource_size()Thomas Meyer
Use resource_size function on resource object instead of explicit computation. The semantic patch that makes this output is available in scripts/coccinelle/api/resource_size.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-26xen/pciback: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/xen/xen-pciback/xenbus.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS ↵Konrad Rzeszutek Wilk
and XEN_PCIDEV_BACKEND_VPCI .. compile options. This way the user can decide during runtime whether they want the default 'vpci' (virtual pci passthrough) or where the PCI devices are passed in without any BDF renumbering. The option 'passthrough' allows the user to toggle the it from 0 (vpci) to 1 (passthrough). Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Remove the DEBUG option.Konrad Rzeszutek Wilk
The latter is easily fixed - by the developer compiling the module with -DDEBUG. And during runtime - the loglvl provides quite a lot of useful data. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Drop two backends, squash and cleanup some code.Konrad Rzeszutek Wilk
- Remove the slot and controller controller backend as they are not used. - Document the find pciback_[read|write]_config_[byte|word|dword] to make it easier to find. - Collapse the code from conf_space_capability_msi into pciback_ops.c - Collapse conf_space_capability_[pm|vpd].c in conf_space_capability.c [and remove the conf_space_capability.h file] - Rename all visible functions from pciback to xen_pcibk. - Rename all the printk/pr_info, etc that use the "pciback" to say "xen-pciback". - Convert functions that are not referenced outside the code to be static to save on name space. - Do the same thing for structures that are internal to the driver. - Run checkpatch.pl after the renames and fixup its warnings and fix any compile errors caused by the variable rename - Cleanup any structs that checkpath.pl commented about or just look odd. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Print out the MSI/MSI-X (PIRQ) valuesKonrad Rzeszutek Wilk
If the verbose_request is set (and loglevel high enough), print out the MSI/MSI-X values that are sent to the guest. This should aid in debugging issues. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.Konrad Rzeszutek Wilk
If we try to setup an fake IRQ handler for legacy interrupts for devices that only have MSI-X (most if not all SR-IOV cards), we will fail with this: pciback[0000:01:10.0]: failed to install fake IRQ handler for IRQ 0! (rc:-38) Since those cards don't have anything in dev->irq. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen: rename pciback module to xen-pciback.Ian Campbell
pciback is rather generic for a modular distro style kernel. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-07-20xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic ↵Konrad Rzeszutek Wilk
cases. We were using coarse spinlocks that could end up with a deadlock. This patch fixes that and makes the spinlocks much more fine-grained. We also drop be->watchding state spinlocks as they are already guarded by the xenwatch_thread against multiple customers. Without that we would trigger the BUG: scheduling while atomic. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Allocate IRQ handler for device that is shared with guest.Konrad Rzeszutek Wilk
If the device that is to be shared with a guest is a level device and the IRQ is shared with the initial domain we need to take actions. Mainly we install a dummy IRQ handler that will ACK on the interrupt line so as to not have the initial domain disable the interrupt line. This dummy IRQ handler is not enabled when the device MSI/MSI-X lines are set, nor for edge interrupts. And also not for level interrupts that are not shared amongst devices. Lastly, if the user passes to the guest all of the PCI devices on the shared line the we won't install the dummy handler either. There is also SysFS instrumentation to check its state and turn IRQ ACKing on/off if necessary. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Disable MSI/MSI-X when reseting a deviceKonrad Rzeszutek Wilk
In cases where the guest is abruptly killed and has not disabled MSI/MSI-X interrupts we want to do it for it. Otherwise when the guest is started up and enables MSI, we would get a WARN() that the device already had been enabled. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: guest SR-IOV support for PV guestZhao, Yu
These changes are for PV guest to use Virtual Function. Because the VF's vendor, device registers in cfg space are 0xffff, which are invalid and ignored by PCI device scan. Values in 'struct pci_dev' are fixed up by SR-IOV code, and using these values will present correct VID and DID to PV guest kernel. And command registers in the cfg space are read only 0, which means we have to emulate MMIO enable bit (VF only uses MMIO resource) so PV kernel can work properly. Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: Register the owner (domain) of the PCI device.Konrad Rzeszutek Wilk
When the front-end and back-end start negotiating we register the domain that will use the PCI device. Furthermore during shutdown of guest or unbinding of the PCI device (and unloading of module) from pciback we unregister the domain owner. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-07-20xen/pciback: Cleanup the driver based on checkpatch warnings and errors.Konrad Rzeszutek Wilk
Checkpatch found some extra warnings and errors. This mega patch fixes them all in one big swoop. We also spruce up the pcistub_ids to use DEFINE_PCI_DEVICE_TABLE macro (suggested by Jan Beulich). Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20xen/pciback: xen pci backend driver.Konrad Rzeszutek Wilk
This is the host side counterpart to the frontend driver in drivers/pci/xen-pcifront.c. The PV protocol is also implemented by frontend drivers in other OSes too, such as the BSDs. The PV protocol is rather simple. There is page shared with the guest, which has the 'struct xen_pci_sharedinfo' embossed in it. The backend has a thread that is kicked every-time the structure is changed and based on the operation field it performs specific tasks: XEN_PCI_OP_conf_[read|write]: Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c) Based on which field is probed, we either enable/disable the PCI device, change power state, read VPD, etc. The major goal of this call is to provide a Physical IRQ (PIRQ) to the guest. The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ is tied in to the IO-APIC, or is a vector. For GSI type interrupts, the PIRQ==GSI holds. For MSI/MSI-X the PIRQ value != Linux IRQ number (thought PIRQ==vector). Please note, that with Xen, all interrupts (except those level shared ones) are injected directly to the guest - there is no host interaction. XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c) Enables/disables the MSI/MSI-X capability of the device. These operations setup the MSI/MSI-X vectors for the guest and pass them to the frontend. When the device is activated, the interrupts are directly injected in the guest without involving the host. XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure, perform the appropriate AER commands on the guest. Right now that is a cop-out - we just kill the guest. Besides implementing those commands, it can also - hide a PCI device from the host. When booting up, the user can specify xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the device. The driver was lifted from linux-2.6.18.hg tree and fixed up so that it could compile under v3.0. Per suggestion from Jesse Barnes moved the driver to drivers/xen/xen-pciback. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>