summaryrefslogtreecommitdiff
path: root/drivers/xen
AgeCommit message (Collapse)Author
2010-11-19Merge branch 'xen/dev-evtchn' into upstream/evtchnJeremy Fitzhardinge
* xen/dev-evtchn: xen/evtchn: add missing static xen/evtchn: Fix name of Xen event-channel device xen/evtchn: don't do unbind_from_irqhandler under spinlock xen/evtchn: remove spurious barrier xen/evtchn: ports start enabled xen/evtchn: dynamically allocate port_user array xen/evtchn: track enabled state for each port
2010-11-19xen/evtchn: the evtchn device is non-seekableJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-19Revert "xen/privcmd: create address space to allow writable mmaps"Jeremy Fitzhardinge
This reverts commit 24a89b5be4cf2b7f1b49b56b6cb4a7b71fccf241. We should no longer need an address space now that we're correctly setting VM_PFNMAP on our vmas. Conflicts: drivers/xen/xenfs/super.c Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16xen/events: use locked set|clear_bit() for cpu_evtchn_maskJeremy Fitzhardinge
The per-cpu event channel masks can be updated unlocked from multiple CPUs, so use the locked variant. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-16xen/evtchn: clear secondary CPUs' cpu_evtchn_mask[] after restoreJan Beulich
To bind all event channels to CPU#0, it is not sufficient to set all of its cpu_evtchn_mask[] bits; all other CPUs also need to get their bits cleared. Otherwise, evtchn_do_upcall() will start handling interrupts on CPUs they're not intended to run on, which can be particularly bad for per-CPU ones. [ linux-2.6.18-xen.hg 7de7453dee36 ] Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-16xen/xenfs: update xenfs_mount for new prototypeJeremy Fitzhardinge
.mount now returns a struct dentry *. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-16Merge commit 'v2.6.37-rc2' into upstream/xenfsJeremy Fitzhardinge
* commit 'v2.6.37-rc2': (10093 commits) Linux 2.6.37-rc2 capabilities/syslog: open code cap_syslog logic to fix build failure i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata include/linux/kernel.h: Move logging bits to include/linux/printk.h Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again) hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch PCI: sysfs: fix printk warnings GFS2: Fix inode deallocation race ...
2010-11-13Merge branch 'upstream/core' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: do not release any memory under 1M in domain 0 xen: events: do not unmask event channels on resume xen: correct size of level2_kernel_pgt
2010-11-11xen: set vma flag VM_PFNMAP in the privcmd mmap file_opStefano Stabellini
Set VM_PFNMAP in the privcmd mmap file_op, rather than later in xen_remap_domain_mfn_range when it is too late because vma_wants_writenotify has already been called and vm_page_prot has already been modified. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-11-11xen: events: do not unmask event channels on resumeIan Campbell
The IRQ core code will take care of disabling and reenabling interrupts over suspend resume automatically, therefore we do not need to do this in the Xen event channel code. The only exception is those event channels marked IRQF_NO_SUSPEND which the IRQ core ignores. We must unmask these ourselves, taking care to obey the current IRQ_DISABLED status. Failure check for IRQ_DISABLED leads to enabling polled only event channels, such as that associated with the pv spinlocks, which must never be enabled: [ 21.970432] ------------[ cut here ]------------ [ 21.970432] kernel BUG at arch/x86/xen/spinlock.c:343! [ 21.970432] invalid opcode: 0000 [#1] SMP [ 21.970432] last sysfs file: /sys/devices/virtual/net/lo/operstate [ 21.970432] Modules linked in: [ 21.970432] [ 21.970432] Pid: 0, comm: swapper Not tainted (2.6.32.24-x86_32p-xen-01034-g787c727 #34) [ 21.970432] EIP: 0061:[<c102e209>] EFLAGS: 00010046 CPU: 3 [ 21.970432] EIP is at dummy_handler+0x3/0x7 [ 21.970432] EAX: 0000021c EBX: dfc16880 ECX: 0000001a EDX: 00000000 [ 21.970432] ESI: dfc02c00 EDI: 00000001 EBP: dfc47e10 ESP: dfc47e10 [ 21.970432] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069 [ 21.970432] Process swapper (pid: 0, ti=dfc46000 task=dfc39440 task.ti=dfc46000) [ 21.970432] Stack: [ 21.970432] dfc47e30 c10a39f0 0000021c 00000000 00000000 dfc16880 0000021c 00000001 [ 21.970432] <0> dfc47e40 c10a4f08 0000021c 00000000 dfc47e78 c12240a7 c1839284 c1839284 [ 21.970432] <0> 00000200 00000000 00000000 f5720000 c1f3d028 c1f3d02c 00000180 dfc47e90 [ 21.970432] Call Trace: [ 21.970432] [<c10a39f0>] ? handle_IRQ_event+0x5f/0x122 [ 21.970432] [<c10a4f08>] ? handle_percpu_irq+0x2f/0x55 [ 21.970432] [<c12240a7>] ? __xen_evtchn_do_upcall+0xdb/0x15f [ 21.970432] [<c122481e>] ? xen_evtchn_do_upcall+0x20/0x30 [ 21.970432] [<c1030d47>] ? xen_do_upcall+0x7/0xc [ 21.970432] [<c102007b>] ? apic_reg_read+0xd3/0x22d [ 21.970432] [<c1002227>] ? hypercall_page+0x227/0x1005 [ 21.970432] [<c102d30b>] ? xen_force_evtchn_callback+0xf/0x14 [ 21.970432] [<c102da7c>] ? check_events+0x8/0xc [ 21.970432] [<c102da3b>] ? xen_irq_enable_direct_end+0x0/0x1 [ 21.970432] [<c105e485>] ? finish_task_switch+0x62/0xba [ 21.970432] [<c14e3f84>] ? schedule+0x808/0x89d [ 21.970432] [<c1084dc5>] ? hrtimer_start_expires+0x1a/0x22 [ 21.970432] [<c1085154>] ? tick_nohz_restart_sched_tick+0x15a/0x162 [ 21.970432] [<c102f43a>] ? cpu_idle+0x6d/0x6f [ 21.970432] [<c14db29e>] ? cpu_bringup_and_idle+0xd/0xf [ 21.970432] Code: 5d 0f 95 c0 0f b6 c0 c3 55 66 83 78 02 00 89 e5 5d 0f 95 \ c0 0f b6 c0 c3 55 b2 01 86 10 31 c0 84 d2 89 e5 0f 94 c0 5d c3 55 89 e5 <0f> 0b \ eb fe 55 80 3d 4c ce 84 c1 00 89 e5 57 56 89 c6 53 74 15 [ 21.970432] EIP: [<c102e209>] dummy_handler+0x3/0x7 SS:ESP 0069:dfc47e10 [ 21.970432] ---[ end trace c0b71f7e12cf3011 ]--- Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-29xen: xenfs: privcmd: check put_user() return codeVasiliy Kulikov
put_user() may fail. In this case propagate error code from privcmd_ioctl_mmap_batch(). Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-29convert get_sb_single() usersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-27xen: register xen pci notifierWeidong Han
Register a pci notifier to add (or remove) pci devices to Xen via hypercalls. Xen needs to know the pci devices present in the system to handle pci passthrough and even MSI remapping in the initial domain. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-10-27Merge branches 'upstream/xenfs' and 'upstream/core' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/xenfs' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/privcmd: make privcmd visible in domU xen/privcmd: move remap_domain_mfn_range() to core xen code and export. privcmd: MMAPBATCH: Fix error handling/reporting xenbus: export xen_store_interface for xenfs xen/privcmd: make sure vma is ours before doing anything to it xen/privcmd: print SIGBUS faults xen/xenfs: set_page_dirty is supposed to return true if it dirties xen/privcmd: create address space to allow writable mmaps xen: add privcmd driver xen: add variable hypercall caller xen: add xen_set_domain_pte() xen: add /proc/xen/xsd_{kva,port} to xenfs * 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (29 commits) xen: include xen/xen.h for definition of xen_initial_domain() xen: use host E820 map for dom0 xen: correctly rebuild mfn list list after migration. xen: improvements to VIRQ_DEBUG output xen: set up IRQ before binding virq to evtchn xen: ensure that all event channels start off bound to VCPU 0 xen/hvc: only notify if we actually sent something xen: don't add extra_pages for RAM after mem_end xen: add support for PAT xen: make sure xen_max_p2m_pfn is up to date xen: limit extra memory to a certain ratio of base xen: add extra pages for E820 RAM regions, even if beyond mem_end xen: make sure xen_extra_mem_start is beyond all non-RAM e820 xen: implement "extra" memory to reserve space for pages not present at boot xen: Use host-provided E820 map xen: don't map missing memory xen: defer building p2m mfn structures until kernel is mapped xen: add return value to set_phys_to_machine() xen: convert p2m to a 3 level tree xen: make install_p2mtop_page() static ... Fix up trivial conflict in arch/x86/xen/mmu.c, and fix the use of 'reserve_early()' - in the new memblock world order it is now 'memblock_x86_reserve_range()' instead. Pointed out by Jeremy.
2010-10-22xen: make hvc_xen console work for dom0.Jeremy Fitzhardinge
Use the console hypercalls for dom0 console. [ Impact: Add Xen dom0 console ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: Initialize xenbus for dom0.Juan Quintela
Do initial xenbus/xenstore setup in dom0. In dom0 we need to actually allocate the xenstore resources, rather than being given them from outside. [ Impact: initialize Xenbus ] Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: remap MSIs into pirqs when running as initial domainQing He
Implement xen_create_msi_irq to create an msi and remap it as pirq. Use xen_create_msi_irq to implement an initial domain specific version of setup_msi_irqs. Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: remap GSIs as pirqs when running as initial domainJeremy Fitzhardinge
Implement xen_register_gsi to setup the correct triggering and polarity properties of a gsi. Implement xen_register_pirq to register a particular gsi as pirq and receive interrupts as events. Call xen_setup_pirqs to register all the legacy ISA irqs as pirqs. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: map MSIs into pirqsStefano Stabellini
Map MSIs into pirqs, writing 0 in the MSI vector data field and the pirq number in the MSI destination id field. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: support GSI -> pirq remapping in PV on HVM guestsStefano Stabellini
Disable pcifront when running on HVM: it is meant to be used with pv guests that don't have PCI bus. Use acpi_register_gsi_xen_hvm to remap GSIs into pirqs. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: implement xen_hvm_register_pirqStefano Stabellini
xen_hvm_register_pirq allows the kernel to map a GSI into a Xen pirq and receive the interrupt as an event channel from that point on. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: get the maximum number of pirqs from xenStefano Stabellini
Use PHYSDEVOP_get_nr_pirqs to get the maximum number of pirqs from xen. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: support pirq != irqStefano Stabellini
PHYSDEVOP_map_pirq might return a pirq different from what we asked if we are running as an HVM guest, so we need to be able to support pirqs that are different from linux irqs. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22Merge commit 'konrad/stable/xen-pcifront-0.8.2' into ↵Stefano Stabellini
2.6.36-rc8-initial-domain-v6
2010-10-22xen: improvements to VIRQ_DEBUG outputIan Campbell
* Fix bitmask formatting on 64 bit by specifying correct field widths. * Output both global and local masked and pending information. * Indicate in list of pending interrupts whether they are pending in the L2, masked globally and/or masked locally. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22xen: set up IRQ before binding virq to evtchnJeremy Fitzhardinge
Make sure the irq is set up before binding a virq event channel to it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22xen: ensure that all event channels start off bound to VCPU 0Ian Campbell
All event channels startbound to VCPU 0 so ensure that cpu_evtchn_mask is initialised to reflect this. Otherwise there is a race after registering an event channel but before the affinity is explicitly set where the event channel can be delivered. If this happens then the event channel remains pending in the L1 (evtchn_pending) array but is cleared in L2 (evtchn_pending_sel), this means the event channel cannot be reraised until another event channel happens to trigger the same L2 entry on that VCPU. sizeof(cpu_evtchn_mask(0))==sizeof(unsigned long*) which is not correct, and causes only the first 32 or 64 event channels (depending on architecture) to be initially bound to VCPU0. Use sizeof(struct cpu_evtchn_s) instead. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: stable@kernel.org
2010-10-22xen/events: change to using fasteoiJeremy Fitzhardinge
Change event delivery to: - mask+clear event in the upcall function - use handle_fasteoi_irq as the handler - unmask in the eoi function (and handle migration) Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-20xen/privcmd: make privcmd visible in domUJeremy Fitzhardinge
It has its uses in a domU as well as dom0. Xen will prevent an unprivileged domain from doing anything untoward. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen/privcmd: move remap_domain_mfn_range() to core xen code and export.Ian Campbell
This allows xenfs to be built as a module, previously it required flush_tlb_all and arbitrary_virt_to_machine to be exported. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20privcmd: MMAPBATCH: Fix error handling/reportingIan Campbell
On error IOCTL_PRIVCMD_MMAPBATCH is expected to set the top nibble of the effected MFN and return 0. Currently it leaves the MFN unmodified and returns the number of failures. Therefore: - reimplement remap_domain_mfn_range() using direct HYPERVISOR_mmu_update() calls and small batches. The xen_set_domain_pte() interface does not report errors and since some failures are expected/normal using the multicall infrastructure is too noisy. - return 0 as expected - writeback the updated MFN list to mmapbatch->arr not over mmapbatch, smashing the caller's stack. - remap_domain_mfn_range can be static. With this change I am able to start an HVM domain. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xenbus: export xen_store_interface for xenfsJeremy Fitzhardinge
xen_store_interface is needed by xenfs, and xenfs may be a module. [ Impact: build fix for modular xenfs ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen/privcmd: make sure vma is ours before doing anything to itJeremy Fitzhardinge
Test vma->vm_ops is our operations to make sure we created it. We don't want to stomp on other random vmas. [ Impact: bugfix; prevent ioctl from affecting other mappings ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen/privcmd: print SIGBUS faultsJeremy Fitzhardinge
Print more detail about privcmd mapping faults for debugging. [ Impact: debug ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen/xenfs: set_page_dirty is supposed to return true if it dirtiesJeremy Fitzhardinge
I don't think it matters at all in this case (there's only one caller which checks the return value), but may as well be strictly correct. [ Impact: cleanup ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen/privcmd: create address space to allow writable mmapsJeremy Fitzhardinge
These are necessary to allow writeable mmap of the privcmd node to succeed without being marked read-only for writenotify purposes. Which in turn is necessary to allow mappings of foreign guest pages [ Impact: bugfix: allow writable mappings ] Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen: add privcmd driverJeremy Fitzhardinge
The privcmd interface in xenfs allows the tool stack in the privileged domain to get fairly direct access to the hypervisor in order to do various management things such as domain construction. [ Impact: new xenfs interface for privileged operations ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen: add /proc/xen/xsd_{kva,port} to xenfsIan Campbell
These are used by the userspace xenstore daemon, which runs in dom0. Xenstored is what's behind the xenfs "xenbus" filesystem. [ Impact: provide mapping and port to usermode for xenstore ] Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-20xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.cKonrad Rzeszutek Wilk
Without this dependency we get these compile errors: linux-next-20101020/drivers/xen/biomerge.c: In function 'xen_biovec_phys_mergeable': linux-next-20101020/drivers/xen/biomerge.c:8: error: dereferencing pointer to incomplete type linux-next-20101020/drivers/xen/biomerge.c:9: error: dereferencing pointer to incomplete type linux-next-20101020/drivers/xen/biomerge.c:11: error: implicit declaration of function '__BIOVEC_PHYS_MERGEABLE' Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
2010-10-20Merge branch 'linus' into irq/coreIngo Molnar
Merge reason: update to almost-final-.36 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18x86: xen: Sanitse irq handling (part two)Konrad Rzeszutek Wilk
Thomas Gleixner cleaned up event handling to use the sparse_irq handling, but the xen-pcifront patches utilized the old mechanism. This fixes them to work with sparse_irq handling. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.Konrad Rzeszutek Wilk
We used to depend on CONFIG_SWIOTLB, but that is disabled by default. So when compiling we get this compile error: arch/x86/xen/pci-swiotlb-xen.c: In function 'pci_xen_swiotlb_detect': arch/x86/xen/pci-swiotlb-xen.c:48: error: lvalue required as left operand of assignment Fix it by actually activating the SWIOTLB library. Reported-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18xen/pci: Request ACS when Xen-SWIOTLB is activated.Konrad Rzeszutek Wilk
It used to done in the Xen startup code but that is not really appropiate. [v2: Update Kconfig with PCI requirement] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18xenbus: Xen paravirtualised PCI hotplug support.Yosuke Iwamatsu
The Xen PCI front driver adds two new states that are utilizez for PCI hotplug support. This is a patch pulled from the linux-2.6-xen-sparse tree. Signed-off-by: Noboru Iwamatsu <n_iwamatsu@jp.fujitsu.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Yosuke Iwamatsu <y-iwamatsu@ab.jp.nec.com>
2010-10-18xen/x86/PCI: Add support for the Xen PCI subsystemAlex Nixon
The frontend stub lives in arch/x86/pci/xen.c, alongside other sub-arch PCI init code (e.g. olpc.c). It provides a mechanism for Xen PCI frontend to setup/destroy legacy interrupts, MSI/MSI-X, and PCI configuration operations. [ Impact: add core of Xen PCI support ] [ v2: Removed the IOMMU code and only focusing on PCI.] [ v3: removed usage of pci_scan_all_fns as that does not exist] [ v4: introduced pci_xen value to fix compile warnings] [ v5: squished fixes+features in one patch, changed Reviewed-by to Ccs] [ v7: added Acked-by] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Qing He <qing.he@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org
2010-10-18xen: fix shared irq device passthroughKonrad Rzeszutek Wilk
In driver/xen/events.c, whether bind_pirq is shareable or not is determined by desc->action is NULL or not. But in __setup_irq, startup(irq) is invoked before desc->action is assigned with new action. So desc->action in startup_irq is always NULL, and bind_pirq is always not shareable. This results in pt_irq_create_bind failure when passthrough a device which shares irq to other devices. This patch doesn't use probing_irq to determine if pirq is shareable or not, instead set shareable flag in irq_info according to trigger mode in xen_allocate_pirq. Set level triggered interrupts shareable. Thus use this flag to set bind_pirq flag accordingly. [v2: arch/x86/xen/pci.c no more, so file skipped] Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18xen: Provide a variant of xen_poll_irq with timeout.Konrad Rzeszutek Wilk
The 'xen_poll_irq_timeout' provides a method to pass in the poll timeout for IRQs if requested. We also export those two poll functions as Xen PCI fronted uses them. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
generated by cgit v0.10.2 at 2024-11-18 03:28:18 (GMT)