summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-05-18Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: drivercore: revert addition of of_match to struct device of: fix race when matching drivers
2011-05-18drivercore: revert addition of of_match to struct deviceGrant Likely
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-18Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: don't delay blk_run_queue_async scsi: remove performance regression due to async queue run blk-throttle: Use task_subsys_state() to determine a task's blkio_cgroup block: rescan partitions on invalidated devices on -ENOMEDIA too cdrom: always check_disk_change() on open block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers
2011-05-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] V4L: soc-camera: regression fix: calculate .sizeimage in soc_camera.c [media] v4l2-subdev: fix broken subdev control enumeration [media] Fix cx88 remote control input [media] v4l: Release module if subdev registration fails
2011-05-18drivers/leds/leds-lm3530.c: add MODULE_DEVICE_TABLEAxel Lin
Adding the necessary MODULE_DEVICE_TABLE() information allows the driver to be automatically loaded by udev. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-18rapidio: fix default routing initializationAlexandre Bounine
Fix switch initialization to ensure that all switches have default routing disabled. This guarantees that no unexpected RapidIO packets arrive to the default port set by reset and there is no default routing destination until it is properly configured by software. This update also unifies handling of unmapped destinations by tsi57x, IDT Gen1 and IDT Gen2 switches. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: <stable@kernel.org> [2.6.37+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-17Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tick: Clear broadcast active bit when switching to oneshot rtc: mc13xxx: Don't call rtc_device_register while holding lock rtc: rp5c01: Initialize drvdata before registering device rtc: pcap: Initialize drvdata before registering device rtc: msm6242: Initialize drvdata before registering device rtc: max8998: Initialize drvdata before registering device rtc: max8925: Initialize drvdata before registering device rtc: m41t80: Initialize clientdata before registering device rtc: ds1286: Initialize drvdata before registering device rtc: ep93xx: Initialize drvdata before registering device rtc: davinci: Initialize drvdata before registering device rtc: mxc: Initialize drvdata before registering device clocksource: Install completely before selecting
2011-05-17scsi: remove performance regression due to async queue runJens Axboe
Commit c21e6beb removed our queue request_fn re-enter protection, and defaulted to always running the queues from kblockd to be safe. This was a known potential slow down, but should be safe. Unfortunately this is causing big performance regressions for some, so we need to improve this logic. Looking into the details of the re-enter, the real issue is on requeue of requests. Requeue of requests upon seeing a BUSY condition from the device ends up re-running the queue, causing traces like this: scsi_request_fn() scsi_dispatch_cmd() scsi_queue_insert() __scsi_queue_insert() scsi_run_queue() scsi_request_fn() ... potentially causing the issue we want to avoid. So special case the requeue re-run of the queue, but improve it to offload the entire run of local queue and starved queue from a single workqueue callback. This is a lot better than potentially kicking off a workqueue run for each device seen. This also fixes the issue of the local device going into recursion, since the above mentioned commit never moved that queue run out of line. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Change netdev_fix_features messages loglevel vmxnet3: Fix inconsistent LRO state after initialization sfc: Fix oops in register dump after mapping change IPVS: fix netns if reading ip_vs_* procfs entries bridge: fix forwarding of IPv6
2011-05-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: Revert "mmc: fix a race between card-detect rescan and clock-gate work instances"
2011-05-17PCI: Clear bridge resource flags if requested size is 0Yinghai Lu
During pci remove/rescan testing found: pci 0000:c0:03.0: PCI bridge to [bus c4-c9] pci 0000:c0:03.0: bridge window [io 0x1000-0x0fff] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref] pci 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff]) pci 0000:c0:03.0: Error enabling bridge (-22), continuing pci 0000:c0:03.0: enabling bus mastering pci 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: device not available (can't reserve [io 0x1000-0x0fff]) pcieport: probe of 0000:c0:03.0 failed with error -22 This bug was caused by commit c8adf9a3e873 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") After that commit, pci_hotplug_io_size is changed to additional_io_size from minium size. So it will not go through resource_size(res) != 0 path, and will not be reset. The root cause is: pci_bridge_check_ranges will set RESOURCE_IO flag for pci bridge, and later if children do not need IO resource. those bridge resources will not need to be allocated. but flags is still there. that will confuse the the pci_enable_bridges later. related code: static void assign_requested_resources_sorted(struct resource_list *head, struct resource_list_x *fail_head) { struct resource *res; struct resource_list *list; int idx; for (list = head->next; list; list = list->next) { res = list->res; idx = res - &list->dev->resource[0]; if (resource_size(res) && pci_assign_resource(list->dev, idx)) { ... reset_resource(res); } } } At last, We have to clear the flags in pbus_size_mem/io when requested size == 0 and !add_head. becasue this case it will not go through adjust_resources_sorted(). Just make size1 = size0 when !add_head. it will make flags get cleared. At the same time when requested size == 0, add_size != 0, will still have in head and add_list. because we do not clear the flags for it. After this, we will get right result: pci 0000:c0:03.0: PCI bridge to [bus c4-c9] pci 0000:c0:03.0: bridge window [io disabled] pci 0000:c0:03.0: bridge window [mem 0xf0000000-0xf00fffff] pci 0000:c0:03.0: bridge window [mem 0xfc180000000-0xfc197ffffff 64bit pref] pci 0000:c0:03.0: enabling bus mastering pci 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: setting latency timer to 64 pcieport 0000:c0:03.0: irq 160 for MSI/MSI-X pcieport 0000:c0:03.0: Signaling PME through PCIe PME interrupt pci 0000:c4:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:c0:03.0:pcie01: service driver pcie_pme loaded aer 0000:c0:03.0:pcie02: service driver aer loaded pciehp 0000:c0:03.0:pcie04: Hotplug Controller: v3: more simple fix. also fix one typo in pbus_size_mem Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-16vmxnet3: Fix inconsistent LRO state after initializationThomas Jarosch
During initialization of vmxnet3, the state of LRO gets out of sync with netdev->features. This leads to very poor TCP performance in a IP forwarding setup and is hitting many VMware users. Simplified call sequence: 1. vmxnet3_declare_features() initializes "adapter->lro" to true. 2. The kernel automatically disables LRO if IP forwarding is enabled, so vmxnet3_set_flags() gets called. This also updates netdev->features. 3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still set to true and LRO gets enabled again, even though netdev->features shows it's disabled. Fix it by updating "adapter->lro", too. The private vmxnet3 adapter flags are scheduled for removal in net-next, see commit a0d2730c9571aeba793cb5d3009094ee1d8fda35 "net: vmxnet3: convert to hw_features". Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6. Please CC: comments. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16sfc: Fix oops in register dump after mapping changeBen Hutchings
Commit 747df2258b1b9a2e25929ef496262c339c380009 ('sfc: Always map MCDI shared memory as uncacheable') introduced a separate mapping for the MCDI shared memory (MC_TREG_SMEM). This means we can no longer easily include it in the register dump. Since it is not particularly useful in debugging, substitute a recognisable dummy value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Take lock around probes for drm_fb_helper_hotplug_event drm/i915: Revert i915.semaphore=1 default from 47ae63e0 vga_switcheroo: don't toggle-switch devices drm/radeon/kms: add some evergreen/ni safe regs drm/radeon/kms: fix extended lvds info parsing drm/radeon/kms: fix tiling reg on fusion
2011-05-16Revert "mmc: fix a race between card-detect rescan and clock-gate work ↵Chris Ball
instances" This reverts commit 26fc8775b51484d8c0a671198639c6d5ae60533e, which has been reported to cause boot/resume-time crashes for some users: https://bbs.archlinux.org/viewtopic.php?id=118751. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: <stable@kernel.org>
2011-05-16drm: Take lock around probes for drm_fb_helper_hotplug_eventChris Wilson
We need to hold the dev->mode_config.mutex whilst detecting the output status. But we also need to drop it for the call into drm_fb_helper_single_fb_probe(), which indirectly acquires the lock when attaching the fbcon. Failure to do so exposes a race with normal output probing. Detected by adding some warnings that the mutex is held to the backend detect routines: [ 17.772456] WARNING: at drivers/gpu/drm/i915/intel_crt.c:471 intel_crt_detect+0x3e/0x373 [i915]() [ 17.772458] Hardware name: Latitude E6400 [ 17.772460] Modules linked in: .... [ 17.772582] Pid: 11, comm: kworker/0:1 Tainted: G W 2.6.38.4-custom.2 #8 [ 17.772584] Call Trace: [ 17.772591] [<ffffffff81046af5>] ? warn_slowpath_common+0x78/0x8c [ 17.772603] [<ffffffffa03f3e5c>] ? intel_crt_detect+0x3e/0x373 [i915] [ 17.772612] [<ffffffffa0355d49>] ? drm_helper_probe_single_connector_modes+0xbf/0x2af [drm_kms_helper] [ 17.772619] [<ffffffffa03534d5>] ? drm_fb_helper_probe_connector_modes+0x39/0x4d [drm_kms_helper] [ 17.772625] [<ffffffffa0354760>] ? drm_fb_helper_hotplug_event+0xa5/0xc3 [drm_kms_helper] [ 17.772633] [<ffffffffa035577f>] ? output_poll_execute+0x146/0x17c [drm_kms_helper] [ 17.772638] [<ffffffff81193c01>] ? cfq_init_queue+0x247/0x345 [ 17.772644] [<ffffffffa0355639>] ? output_poll_execute+0x0/0x17c [drm_kms_helper] [ 17.772648] [<ffffffff8105b540>] ? process_one_work+0x193/0x28e [ 17.772652] [<ffffffff8105c6bc>] ? worker_thread+0xef/0x172 [ 17.772655] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772658] [<ffffffff8105c5cd>] ? worker_thread+0x0/0x172 [ 17.772663] [<ffffffff8105f767>] ? kthread+0x7a/0x82 [ 17.772668] [<ffffffff8100a724>] ? kernel_thread_helper+0x4/0x10 [ 17.772671] [<ffffffff8105f6ed>] ? kthread+0x0/0x82 [ 17.772674] [<ffffffff8100a720>] ? kernel_thread_helper+0x0/0x10 Reported-by: Frederik Himpe <fhimpe@telenet.be> References: https://bugs.freedesktop.org/show_bug.cgi?id=36394 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-15drm/i915: Revert i915.semaphore=1 default from 47ae63e0Andy Lutomirski
My Q67 / i7-2600 box has rev09 Sandy Bridge graphics. It hangs instantly when GNOME loads and it hangs so hard the reset button doesn't work. Setting i915.semaphore=0 fixes it. Semaphores were disabled in a1656b9090f7008d2941c314f5a64724bea2ae37 in 2.6.38 and were re-enabled by commit 47ae63e0c2e5fdb582d471dc906eb29be94c732f Merge: c59a333 467cffb Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Mar 7 12:32:44 2011 +0000 Merge branch 'drm-intel-fixes' into drm-intel-next Apply the trivial conflicting regression fixes, but keep GPU semaphores enabled. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_execbuffer.c (It's worth noting that the offending change is i915_drv.c, which is not a conflict.) Signed-off-by: Andy Lutomirski <luto@mit.edu> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-15vga_switcheroo: don't toggle-switch devicesFlorian Mickler
If the requested device is already active, ignore the request. This restores the original behaviour of the interface. The change was probably an unintended side effect of commit 66b37c6777c4 vga_switcheroo: split switching into two stages which did not take into account to duplicate the !active check in the split-off stage2. Fix this by factoring that check out of stage1 into the debugfs_write routine. References: https://bugzilla.kernel.org/show_bug.cgi?id=34252 Reported-by: Igor Murzov <e-mail@date.by> Tested-by: Igor Murzov <e-mail@date.by> Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: fix split bio handling rbd: fix leak of ops struct
2011-05-14Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix oops when LPM is used with PMP
2011-05-14libata: fix oops when LPM is used with PMPTejun Heo
ae01b2493c (libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65) added ATA_FLAG_NO_DIPM and made ata_eh_set_lpm() check the flag. However, @ap is NULL if @link points to a PMP link and thus the unconditional @ap->flags dereference leads to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 ... Pid: 295, comm: scsi_eh_4 Tainted: P 2.6.38.5-core2 #1 System76, Inc. Serval Professional/Serval Professional RIP: 0010:[<ffffffff813f98e1>] [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP: 0018:ffff880132defbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880132f40000 RCX: 0000000000000000 RDX: ffff88013377c000 RSI: ffff880132f40000 RDI: 0000000000000000 RBP: ffff880132defce0 R08: ffff88013377dc58 R09: ffff880132defd98 R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000 R13: 0000000000000000 R14: ffff88013377c000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8800bf700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000001a03000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process scsi_eh_4 (pid: 295, threadinfo ffff880132dee000, task ffff880133b416c0) Stack: 0000000000000000 ffff880132defcc0 0000000000000000 ffff880132f42738 ffffffff813ee8f0 ffffffff813eefe0 ffff880132defd98 ffff88013377f190 ffffffffa00b3e30 ffffffff813ef030 0000000032defc60 ffff880100000000 Call Trace: [<ffffffff81400867>] sata_pmp_error_handler+0x607/0xc30 [<ffffffffa00b273f>] ahci_error_handler+0x1f/0x70 [libahci] [<ffffffff813faade>] ata_scsi_error+0x5be/0x900 [<ffffffff813cf724>] scsi_error_handler+0x124/0x650 [<ffffffff810834b6>] kthread+0x96/0xa0 [<ffffffff8100cd64>] kernel_thread_helper+0x4/0x10 Code: 8b 95 70 ff ff ff b8 00 00 00 00 48 3b 9a 10 2e 00 00 48 0f 44 c2 48 89 85 70 ff ff ff 48 8b 8d 70 ff ff ff f6 83 69 02 00 00 01 <48> 8b 41 18 0f 85 48 01 00 00 48 85 c9 74 12 48 8b 51 08 48 83 RIP [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510 RSP <ffff880132defbf0> CR2: 0000000000000018 Fix it by testing @link->ap->flags instead. stable: ATA_FLAG_NO_DIPM was added during 2.6.39 cycle but was backported to 2.6.37 and 38. This is a fix for that and thus also applicable to 2.6.37 and 38. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "Nathan A. Mourey II" <nmoureyii@ne.rr.com> LKML-Reference: <1304555277.2059.2.camel@localhost.localdomain> Cc: Connor H <cmdkhh@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-05-14Merge branch 'fbmem'Linus Torvalds
* fbmem: Further fbcon sanity checking fbmem: fix remove_conflicting_framebuffers races
2011-05-14Revert "libata: ahci_start_engine compliant to AHCI spec"Tejun Heo
This reverts commit 270dac35c26433d06a89150c51e75ca0181ca7e4. The commits causes command timeouts on AC plug/unplug. It isn't yet clear why. As the commit was for a single rather obscure controller, revert the change for now. The problem was reported and bisected by Gu Rui in bug#34692. https://bugzilla.kernel.org/show_bug.cgi?id=34692 Also, reported by Rafael and Michael in the following thread. http://thread.gmane.org/gmane.linux.kernel/1138771 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Gu Rui <chaos.proton@gmail.com> Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Michael Leun <lkml20100708@newton.leun.net> Cc: Jian Peng <jipeng2005@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14Further fbcon sanity checkingBruno Prémont
This moves the if (num_registered_fb == FB_MAX) return -ENXIO; check _AFTER_ the call to do_remove_conflicting_framebuffers() as this would (now in a safe way) allow a native driver to replace the conflicting one even if all slots in registered_fb[] are taken. This also prevents unregistering a framebuffer that is no longer registered (vga16f will unregister at module unload time even if the frame buffer had been unregistered earlier due to being found conflicting). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14fbmem: fix remove_conflicting_framebuffers racesLinus Torvalds
When a register_framebuffer() call results in us removing old conflicting framebuffers, the new registration_lock doesn't protect that situation. And we can't just add the same locking to the function, because these functions call each other: register_framebuffer() calls remove_conflicting_framebuffers, which in turn calls unregister_framebuffer for any conflicting entry. In order to fix it, this just creates wrapper functions around all three functions and makes the versions that actually do the work be called "do_xxx()", leaving just the wrapper that gets the lock and calls the worker function. So the rule becomes simply that "do_xxxx()" has to be called with the lock held, and now do_register_framebuffer() can just call do_remove_conflicting_framebuffers(), and that in turn can call _do_unregister_framebuffer(), and there is no deadlock, and we can hold the registration lock over the whole sequence, fixing the races. It also makes error cases simpler, and fixes one situation where we would return from unregister_framebuffer() without releasing the lock, pointed out by Bruno Prémont. Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bridge: fix forwarding of IPv6 bonding,llc: Fix structure sizeof incompatibility for some PDUs ipv6: restore correct ECN handling on TCP xmit ne-h8300: Fix regression caused during net_device_ops conversion hydra: Fix regression caused during net_device_ops conversion zorro8390: Fix regression caused during net_device_ops conversion sfc: Always map MCDI shared memory as uncacheable ehea: Fix memory hotplug oops libertas: fix cmdpendingq locking iwlegacy: fix IBSS mode crashes ath9k: Fix a warning due to a queued work during S3 state mac80211: don't start the dynamic ps timer if not associated
2011-05-13rbd: fix split bio handlingYehuda Sadeh
The rbd driver currently splits bios when they span an object boundary. However, the blk_end_request expects the completions to roll up the results in block device order, and the split rbd/ceph ops can complete in any order. This patch adds a struct rbd_req_coll to track completion of split requests and ensures that the results are passed back up to the block layer in order. This fixes errors where the file system gets completion of a read operation that spans an object boundary before the data has actually arrived. The bug is easily reproduced with iozone with a working set larger than available RAM. Reported-by: Fyodor Ustinov <ufm@ufm.su> Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-13drm/i915: Revert i915.semaphore=1 default from i915 mergeAndy Lutomirski
My Q67 / i7-2600 box has rev09 Sandy Bridge graphics. It hangs instantly when GNOME loads and it hangs so hard the reset button doesn't work. Setting i915.semaphore=0 fixes it. Semaphores were disabled in a1656b9090f7 ("drm/i915: Disable GPU semaphores by default") in 2.6.38 but were then re-enabled (by mistake?) by the merge 47ae63e0c2e5 ("Merge branch 'drm-intel-fixes' into drm-intel-next"). (It's worth noting that the offending change is i915_drv.c, which was not marked as a conflict - although a 'git show --cc' on the merge does show that neither parent had it set to 1) Signed-off-by: Andy Lutomirski <luto@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-13bonding,llc: Fix structure sizeof incompatibility for some PDUsVitalii Demianets
With some combinations of arch/compiler (e.g. arm-linux-gcc) the sizeof operator on structure returns value greater than expected. In cases when the structure is used for mapping PDU fields it may lead to unexpected results (such as holes and alignment problems in skb data). __packed prevents this undesired behavior. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13drm/radeon/kms: add some evergreen/ni safe regsAlex Deucher
need to programmed from the userspace drivers. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-13drm/radeon/kms: fix extended lvds info parsingAlex Deucher
On rev <= 1.1 tables, the offset is absolute, on newer tables, it's relative. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=700326 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-13drm/radeon/kms: fix tiling reg on fusionAlex Deucher
The location of MC_ARB_RAMCFG changed on fusion. I've diffed all the other regs in evergreend.h and this is the only other reg that changed. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-05-13rbd: fix leak of ops structSage Weil
The ops vector must be freed by the rbd_do_request caller. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-12i2c: pnx: Fix crash due to wrong init of timer->dataWolfram Sang
alg_data is already a pointer which must be passed directly. Reported-by: Dieter Ripp <ripp@systecnet.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ben Dooks <ben-i2c@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-05-12ne-h8300: Fix regression caused during net_device_ops conversionGeert Uytterhoeven
Changeset dcd39c90290297f6e6ed8a04bb20da7ac2b043c5 ("ne-h8300: convert to net_device_ops") broke ne-h8300 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in ne-h8300.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12hydra: Fix regression caused during net_device_ops conversionGeert Uytterhoeven
Changeset 5618f0d1193d6b051da9b59b0e32ad24397f06a4 ("hydra: convert to net_device_ops") broke hydra by adding 8390.o to the link. That meant that lib8390.c was included twice, once in hydra.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12zorro8390: Fix regression caused during net_device_ops conversionGeert Uytterhoeven
Changeset b6114794a1c394534659f4a17420e48cf23aa922 ("zorro8390: convert to net_device_ops") broke zorro8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in zorro8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. Fix based on commits 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion") and 4e0168fa4842e27795a75b205a510f25b62181d9 ("mac8390: fix build with NET_POLL_CONTROLLER"). Reported-by: Christian T. Steigies <cts@debian.org> Suggested-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Christian T. Steigies <cts@debian.org> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12Merge branch 'sfc-2.6.39' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-2.6
2011-05-12Revert "drm/i915: Only enable the plane after setting the fb base (pre-ILK)"Linus Torvalds
This reverts commit 49183b2818de6899383bb82bc032f9344d6791ff. Quoth Franz Melchior: "This patch introduces a bug on my infamous "Acer Travelmate 5735Z-452G32Mnss": when KMS takes over, the frame buffer contents get completely garbled up on screen, with colored stripes and unreadable text (photo on request). Only when X11 is started, the screen gets restored again. Closing and re-opening the lid partly cures the mess, too: it makes the font readable, though horizontally stretched." Acked-by: Keith Packard <keithp@keithp.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12Merge branch 'fbmem'Linus Torvalds
* fbmem: fbmem: make read/write/ioctl use the frame buffer at open time fbcon: add lifetime refcount to opened frame buffers
2011-05-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ads7846 - remove unused variable from struct ads7845_ser_req Input: ads7846 - make transfer buffers DMA safe
2011-05-12Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accesses ARM: 6892/1: handle ptrace requests to change PC during interrupted system calls ARM: 6890/1: memmap: only free allocated memmap entries when using SPARSEMEM ARM: zImage: the page table memory must be considered before relocation ARM: zImage: make sure not to relocate on top of the relocation code ARM: zImage: Fix bad SP address after relocating kernel ARM: zImage: make sure the stack is 64-bit aligned ARM: RiscPC: acornfb: fix section mismatches ARM: RiscPC: etherh: fix section mismatches
2011-05-12fbmem: make read/write/ioctl use the frame buffer at open timeLinus Torvalds
read/write/ioctl on a fbcon file descriptor has traditionally used the fbcon not when it was opened, but as it was at the time of the call. That makes no sense, but the lack of sense is much more obvious now that we properly ref-count the usage - it means that the ref-counting doesn't actually protect operations we do on the frame buffer. This changes it to look at the fb_info that we got at open time, but in order to avoid using a frame buffer long after it has been unregistered, we do verify that it is still current, and return -ENODEV if not. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12fbcon: add lifetime refcount to opened frame buffersLinus Torvalds
This just adds the refcount and the new registration lock logic. It does not (for example) actually change the read/write/ioctl routines to actually use the frame buffer that was opened: those function still end up alway susing whatever the current frame buffer is at the time of the call. Without this, if something holds the frame buffer open over a framebuffer switch, the close() operation after the switch will access a fb_info that has been free'd by the unregistering of the old frame buffer. (The read/write/ioctl operations will normally not cause problems, because they will - illogically - pick up the new fbcon instead. But a switch that happens just as one of those is going on might see problems too, the window is just much smaller: one individual op rather than the whole open-close sequence.) This use-after-free is apparently fairly easily triggered by the Ubuntu 11.04 boot sequence. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12sfc: Always map MCDI shared memory as uncacheableBen Hutchings
We enabled write-combining for memory-mapped registers in commit 65f0b417dee94f779ce9b77102b7d73c93723b39, but inhibited it for the MCDI shared memory where this is not supported. However, write-combining mappings also allow read-reordering, which may also be a problem. I found that when an SFC9000-family controller is connected to an Intel 3000 chipset, and write-combining is enabled, the controller stops responding to PCIe read requests during driver initialisation while the driver is polling for completion of an MCDI command. This results in an NMI and system hang. Adding read memory barriers between all reads to the shared memory area appears to reduce but not eliminate the probability of this. We have not yet established whether this is a bug in our BIU or in the PCIe bridge. For now, work around by mapping the shared memory area separately. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-05-12ehea: Fix memory hotplug oopsAnton Blanchard
The ehea driver oopses during memory hotplug if the ports are not up. A simple testcase: # ifconfig ethX down # echo offline > /sys/devices/system/memory/memory32/state Oops: Kernel access of bad area, sig: 11 [#1] last sysfs file: /sys/devices/system/memory/memory32/state REGS: c000000709393110 TRAP: 0300 Not tainted (2.6.39-rc2-01385-g7ef73bc-dirty) DAR: 0000000000000000, DSISR: 40000000 ... NIP [c000000000067c98] .__wake_up_common+0x48/0xf0 LR [c00000000006d034] .__wake_up+0x54/0x90 Call Trace: [c00000000006d034] .__wake_up+0x54/0x90 [d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea] [d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea] [c0000000006fc8a8] .notifier_call_chain+0x78/0xf0 [c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0 [c000000000458d78] .memory_notify+0x28/0x40 [c0000000001871d8] .remove_memory+0x208/0x6d0 [c000000000458264] .memory_section_action+0x94/0x140 [c0000000004583ec] .memory_block_change_state+0xdc/0x1d0 [c0000000004585cc] .store_mem_state+0xec/0x160 [c00000000044768c] .sysdev_store+0x3c/0x50 [c00000000020b48c] .sysfs_write_file+0xec/0x1f0 [c00000000018f86c] .vfs_write+0xec/0x1e0 [c00000000018fa88] .SyS_write+0x58/0xd0 To fix this, initialise the waitqueues during port probe instead of port open. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Acked-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/nouveau: fix build regression on alpha due to Xen changes. drm/radeon/kms: fix cayman acceleration drm/radeon: fix cayman struct accessors.
2011-05-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix for the TWL4030 PM sleep/wakeup sequence mfd: Fix asic3 build error mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset
2011-05-12Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix alloc_pgste check in init_new_context [S390] oprofile: fix min/max interval query checks [S390] replace diag10() with diag10_range() function [S390] disassembler: handle b280/spp instruction [S390] kernel: Initialize register 14 when starting new CPU [S390] dasd: prevent IO error during reserve/release loop [S390] sclp/memory hotplug: fix initial usecount of increments
2011-05-12drivers/rtc/rtc-s3c.c: fixup wake support for rtcBen Dooks
The driver is not balancing set_irq and disable_irq_wake() calls, so ensure that it keeps track of whether the wake is enabled. The fixes the following error on S3C6410 devices: WARNING: at kernel/irq/manage.c:382 set_irq_wake+0x84/0xec() Unbalanced IRQ 92 wake disable Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>