summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-03-09Merge ../linux-2.6Paul Mackerras
2006-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge: powerpc: Fix various syscall/signal/swapcontext bugs [PATCH] powerpc: incorrect rmo_top handling in prom_init [PATCH] powerpc: Fix incorrect pud_ERROR() message [PATCH] powerpc: Expose SMT and L1 icache snoop userland features [PATCH] powerpc: Fix windfarm_pm112 not starting all control loops [PATCH] powerpc: Fix old g5 issues with windfarm powerpc32: Fix timebase synchronization on 32-bit powermacs powerpc: Turn off verbose debug output in powermac platform functions powerpc: Fix might-sleep warning in program check exception handler
2006-03-09Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: Merge branch 'work-fixes' V4L/DVB (3413): Typos grab bag of the month V4L/DVB (3403): Workaround to fix initialization for Nexus CA Merge branch 'work-fixes' V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem ID V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146) V4L/DVB (3300a): Removing personal email from DVB maintainers V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driver V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probe V4L/DVB (3354): Fix maximum for the saturation and contrast controls. V4L/DVB (3352): Cxusb: fix lgdt3303 naming V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cards V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 input V4L/DVB (3341): Upstream sync - make 2 structs static V4L/DVB (3340): Make a struct static V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanups V4L/DVB (3336): Bt8xx documentation authors fix
2006-03-08[PATCH] dac960: add disk entropy in request completionsMatt Mackall
Signed-off-by: Matt Mackall <mpm@selenic.com> Tested-by: Anders K. Pedersen <akp@cohaesio.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] s390: dasd partition detectionHorst Hummel
DASD allows to open a device as soon as gendisk is registered, which means the device is a fake device (capacity=0) and we do know nothing about blocksize and partitions at that point of time. In case the device is opened by someone, the bdev and inode creation is done with the fake device info and the following partition detection code is just using the wrong data. To avoid this modify the DASD state machine to make sure that the open is rejected until the device analysis is either finished or an unformatted device was detected. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] s390: iucv message limit for smsgMartin Schwidefsky
The message limit on the iucv connect call for the smsg module is too low. Therefore increase the smsg message limit to 255. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] serial core: work around sub-driver bugsPavel Machek
We're presently getting oopses because Bluetooth (and possibly other) drivers are calling core functions after things have been shut down. So rather than oopsing, let's drop a warning then take avoiding action, so the machine survives. Once all the sub-drivers are fixed up we can remove the take-avoiding-action part. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] mca recovery return value when no bus check [IA64] SGI SN drivers: don't report !sn2 hardware as an error [IA64] don't report !sn2 or !summit hardware as an error [IA64] gensparse_defconfig: turn on PNPACPI [IA64] Increase severity of MCA recovery messages
2006-03-08Merge branch 'work-fixes'Mauro Carvalho Chehab
2006-03-08V4L/DVB (3413): Typos grab bag of the monthAlexey Dobriyan
Typos grab bag of the month. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08V4L/DVB (3403): Workaround to fix initialization for Nexus CAMarco Schluessler
Workaround for Nexus CA: Debi test fails unless first debi write is repeated. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-08Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] ip22zilog: Fix oops on runlevel change with serial console [SERIAL] Fix two bugs in parport_serial
2006-03-07[IA64] SGI SN drivers: don't report !sn2 hardware as an errorBjorn Helgaas
This stuff is all in the generic ia64 kernel, and the new initcall error reporting complains about them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-07[SERIAL] ip22zilog: Fix oops on runlevel change with serial consoleMartin Michlmayr
Incorrect uart_write_wakeup() calls cause reference to a NULL tty pointer. This has been fixed in the sunsab and sunzilog serial drivers in October 2005. Update the ip22zilog, which is based on sunzilog, accordingly. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk
2006-03-07[TG3]: Add DMA address workaroundMichael Chan
Add DMA workaround for chips that do not support full 64-bit DMA addresses. 5714, 5715, and 5780 chips only support DMA addresses less than 40 bits. On 64-bit systems with IOMMU, set the dma_mask to 40-bit so that pci_map_xxx() calls will map the DMA address below 40 bits if necessary. On 64-bit systems without IOMMU, set the dma_mask to 64-bit and check for DMA addresses exceeding the limit in tg3_start_xmit(). 5788 only supports 32-bit DMA so need to set the mask appropriately also. Thanks to Chris Elmquist at SGI for reporting and helping to debug the problem on 5714. Thanks to David Miller for explaining the HIGHMEM and DMA stuff. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-07Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/srp: Don't send task management commands after target removal
2006-03-07[PATCH] s390: improve response code handling in chsc_enable_facility()Cornelia Huck
Rather than checking for some known failures, check positively for the success response code 0x0001 and return -EIO for unrecognized failure response codes. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Greg Smith <gsmith@nc.rr.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-07[PATCH] windfarm license fixBenjamin Herrenschmidt
The Windfarm PID module lacks a licence, it should be GPL, here it is Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-07[PATCH] i4l: fix compatiblity issue with big endian systemsKarsten Keil
This patch fix some compatiblity issues with big endian systems Signed-off-by: Martin Bachem <info@colognechip.com> Signed-off-by: Karsten Keil <kkeil@suse.de> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-07[PATCH] i4l: fix refcounting problem with ttyIx devicesKarsten Keil
If the same ttyIx device was opened by two processes the module was not released and so the usage count went never to zero again. This oneliner fixes the issue. Signed-off-by: Oskar Senft <o.senft@sirrix.com> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-07[PATCH] i4l: add new PCI IDs for HFC-S PCIKarsten Keil
Add new PCI IDs for HFC-S PCI based ISDN TA 'Primux II S0' and 'Primux II S0' from Gerdes AG Signed-off-by: Martin Bachem <info@colognechip.com> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-07Allocate 96 bytes for SCSI sense data replyLinus Torvalds
The SCSI layer uses SCSI_SENSE_BUFFERSIZE (96) for the sense buffer size, even though some other code uses "sizeof(struct request_sense)" (which is 64 bytes). Allocate the buffer using the bigger of the two for safety. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06[PATCH] USB Serial: fix use-after-free bug in usb-serial coreGreg Kroah-Hartman
This fixes a use-after-free bug in the usb-serial core. It is simple to trigger this (open a usb-serial port, then yank the device out before closing the port.) Thanks to Stefan Seyfried <seife@suse.de> for reporting this, and to the slab debugging code which enabled it to be tracked down. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] chelsio: fix kmalloc failure in t1_espi_create Merge branch 'master' s2io: set_multicast_list bug
2006-03-06[PATCH] chelsio: fix kmalloc failure in t1_espi_createEric Sesterhenn
memset() is called before check. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-06Merge branch 'master'Jeff Garzik
2006-03-05[SERIAL] Fix two bugs in parport_serialRussell King
Steinar H. Gunderson reported: - For some reason, it detects the 9845 as a 9735 -- it appears this is simply related to the ordering in parport_serial_pci_tbl[]. If we move the 9845 up above the 9735, it prints out 9710:9845, but no change in behaviour. (We didn't find out why this was the case; we left it alone since it didn't affect our problem.) - The card has no parallel port (at least no physical ones), yet it reports (via its subsystem ID of 0x0014) one parallel port and four serial ports. The probe for the parallel port fails, and the driver just aborts. Thus, it doesn't find the serial ports. Fix the debugging code to use dev_dbg, but don't bother displaying the PCI ID of the detected board (that's accessible via other means.) Also, arrange for parport_register() to return 0 even if it finds no ports. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-05[ATM]: [fore200e] fix section mismatch warningsSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-05Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [PATCH] Add missing ifdef for VIA RNG code
2006-03-04[MMC] au1xmmc: Fix a compilation warning ('status' is not used)Martin Michlmayr
Fix a trivial compilation warning: CC drivers/mmc/au1xmmc.o drivers/mmc/au1xmmc.c: In function ‘au1xmmc_dma_callback’: drivers/mmc/au1xmmc.c:743: warning: unused variable ‘status’ Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-04[MMC] au1xmmc: Fix linking error because mmc_rsp_type doesn't existMartin Michlmayr
drivers/mmc/au1xmmc.c doesn't compile because commit e92251762d02a46177d4105d1744041e3f8bc465 introduced a typo and passes the wrong argument to the mmc_resp_type macro. Error because of the typo: CC drivers/mmc/au1xmmc.o drivers/mmc/au1xmmc.c: In function ‘au1xmmc_send_command’: drivers/mmc/au1xmmc.c:197: warning: implicit declaration of function ‘mmc_rsp_type’ ... LD .tmp_vmlinux1 drivers/built-in.o: In function `au1xmmc_request':au1xmmc.c:(.text+0x89504): undefined reference to `mmc_rsp_type' :au1xmmc.c:(.text+0x8968c): undefined reference to `mmc_rsp_type' make: *** [.tmp_vmlinux1] Error 1 Error because of the wrong argument: CC drivers/mmc/au1xmmc.o drivers/mmc/au1xmmc.c: In function ‘au1xmmc_send_command’: drivers/mmc/au1xmmc.c:197: error: invalid type argument of ‘->’ Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-04[MMC] au1xmmc: Fix compilation error by using platform_driverMartin Michlmayr
drivers/mmc/au1xmmc.c currently doesn't compile; it needs to be converted to use platform_driver. I cannot test this change because of lack of hardware but I followed the drivers this one is based on, and the code is certainly not worse than before. drivers/mmc/au1xmmc.c: At top level: drivers/mmc/au1xmmc.c:1002: error: ‘platform_bus_type’ undeclared here (not in a function) make[2]: *** [drivers/mmc/au1xmmc.o] Error 1 Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-04s2io: set_multicast_list bugJeff Garzik
The mac_addr variable doesn't get reset between (re)additions of multicast addresses. One byte of all multicast addresses (except the first) can be incorrect. Signed-off-by: Arthur Kepner <akepner@sgi.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04[PATCH] Add missing ifdef for VIA RNG codeMark Brown
Almost all the code for the VIA RNG is guarded with __i386__ #ifdefs, the only exception being the enumeration of RNG types which is used to index into the rng_vector ops array. This patch adds an ifdef around that for consistency and since the guard makes a difference when adding new RNG types on non-i386 hardware. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-Off-By: Jeff Garzik <jeff@garzik.org>
2006-03-04IB/srp: Don't send task management commands after target removalRoland Dreier
Just fail abort and reset requests that come in after we've already decided to remove a target. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-03-03Merge branch 'work-fixes'Mauro Carvalho Chehab
2006-03-03V4L/DVB (3395): Fixed Pinnacle 300i DVB-T supportHartmut Hackmann
- fixed tda9886 port 2 setting - turned remote control receiver off via saa7134 GPIO to avoid i2c hangs - modified tda9886 client calls to direct i2c access to allow proper return to analog mode - allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY client call Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3399): ELSA EX-VISION 500TV: fix incorrect PCI subsystem IDMichael Krufky
- ELSA EX-VISION 500TV was incorrectly programmed to have the same subsystem ID as ELSA EX-VISION 300TV, (1048:226b) - This changeset replaces the incorrect subsystem ID (1048:226b) with the correct one (1048:226a) for the ELSA EX-VISION 500TV. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3382): Fix stv0297 for qam128 on tt c1500 (saa7146)Mattias Nordstrom
I have a TT C1500 card (saa7146, STV0297) which had problems tuning channels at QAM128 (like the ones in the Finnish HTV / Welho network). A fix which seems to work perfectly so far is to change the delay for QAM128 to the same values as for QAM256 in stv0297_set_frontend(), Signed-off-by: Mattias Nordstrom <nordstrom@realnode.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3385): Dvb: fix __init/__exit section references in av7110 driverJohannes Stezenbach
use __devinit/__devexit/__devexit_p() where appropriate Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3378): Restore power on defaults of tda9887 after tda8290 probeHartmut Hackmann
The probing code for tda8290 changes the state of the tda9887 GP ports. The patch assumes that if probing for tda8290 failed, this must be a tda9887 and restores its power on defaults. This should solve the module load order issue with some pinnacle cards. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3354): Fix maximum for the saturation and contrast controls.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3352): Cxusb: fix lgdt3303 namingMichael Krufky
The following are specific to lgdt3303, and are being renamed to reflect this. - cxusb_lgdt330x_config renamed to cxusb_lgdt3303_config. - cxusb_lgdt330x_frontend_attach renamed to cxusb_lgdt3303_frontend_attach. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3348): Fixed saa7134 ALSA initialization with multiple cardsRicardo Cerqueira
When multiple cards were installed, only the first card would have audio initialized, because only the first position in the array parameter defaulted to "1" To make things worse, the "enable" parameter wasn't enabled, so there was no workaround. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3347): Pinnacle PCTV 40i: add filtered Composite2 inputKarsten Suehring
This patch adds another composite input to the Pinnacle PCTV 100i definition which filters the chrominace signal from the luma input. This improves video quality for Composite signals on the S-Video connector of the card. In addition the name string of the card is changed to include PCTV 40i and 50i since these cards are identical. Signed-off-by: Karsten Suehring <ksuehring@gmx.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3341): Upstream sync - make 2 structs staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3340): Make a struct staticManu Abraham
Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03V4L/DVB (3337): Drivers/media/dvb/frontends/mt312.c: cleanupsAdrian Bunk
This patch contains the following possible cleanups: - update the Kconfig help to mention the VP310 - merge vp310_attach and mt312_attach into a new vp310_mt312_attach to remove some code duplication Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03[PATCH] powerpc: Fix windfarm_pm112 not starting all control loopsBenjamin Herrenschmidt
This adds a couple of printk's to windfarm_pm112 to display which control loops are actually starting and fixes a bug where it would not start all loops. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-03[PATCH] powerpc: Fix old g5 issues with windfarmBenjamin Herrenschmidt
Some of the windfarm sensor modules can initialize on old machines that don't have full windfarm support like non-dual core desktop G5s. Unfortunately, by doing so, they would trigger a bug in their matching algorithm causing them to attach to the wrong bus, thus triggering issues with the i2c core and breaking the thermal driver. This patch fixes the probing issue (so that they will work when a windfarm port is done to these machines) and also prevents for now windfarm to load at all on these machines that still use therm_pm72 to avoid wasting resources. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v0.10.2 at 2024-11-12 00:37:01 (GMT)