summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-01Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name style V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors. V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is true V4L/DVB (12457): zr364: wrong indexes V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfaces V4L/DVB (12450): Siano: Fixed SDIO compilation bugs V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xx V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devices
2009-09-01ata_piix: parallel scanning on PATA needs an extra lockingBartlomiej Zolnierkiewicz
Commit log for commit 517d3cc15b36392e518abab6bacbb72089658313 ("[libata] ata_piix: Enable parallel scan") says: This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. and it is all true but once we put all things together additional constraints for PATA controllers show up (some hardware registers have per-host not per-port atomicity) and we risk misprogramming the controller. I used the following test to check whether the issue is real: @@ -736,8 +736,20 @@ static void piix_set_piomode(struct ata_ (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); - if (is_slave) + if (is_slave) { + if (ap->port_no == 0) { + u8 tmp = slave_data; + + while (slave_data == tmp) { + pci_read_config_byte(dev, slave_port, &tmp); + msleep(50); + } + + dev_printk(KERN_ERR, &dev->dev, "PATA parallel scan " + "race detected\n"); + } pci_write_config_byte(dev, slave_port, slave_data); + } /* Ensure the UDMA bit is off - it will be turned back on if UDMA is selected */ and it indeed triggered the error message. Lets fix all such races by adding an extra locking to ->set_piomode and ->set_dmamode methods for PATA controllers. [ Alan: would be better to take the host lock in libata-core for these cases so that we fix all the adapters in one swoop. "Looks fine as a temproary quickfix tho" ] Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Improve CRTDDC mapping by using VBT info drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU. drm/i915: Set crtc/clone mask in different output devices drm/i915: Always use SDVO_B detect bit for SDVO output detection. drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx drm/i915: Set the multiplier for SDVO on G33 platform
2009-08-31V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors.Randy Dunlap
Reported-by: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is trueShine Liu
We should call em28xx_ir_init(dev) only when disable_ir is true. Signed-off-by: Shine Liu <shinel@foxmail.com> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12457): zr364: wrong indexesRoel Kluin
The order of indexes is reversed Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfacesUdi Atar
Update KConfig file to enbale selection of SDIO and USB interfaces, and add dependancy on relevant modules. [mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu] Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12450): Siano: Fixed SDIO compilation bugsUdi Atar
Fixed SDIO compilation bugs Also fixed a memory overrun issue in buffer management. Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xxMauro Carvalho Chehab
[mchehab@redhat.com: fix merge conflict and a few CodingStyle issues] Signed-off-by: Steve Gotthardt <gotthardt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devicesMichael Krufky
Previous changesets broke Hauppauge devices and their GPIO configurations. This changeset restores the LED & LNA functionality. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-30drm/i915: Improve CRTDDC mapping by using VBT infoDavid Müller (ELSOFT AG)
Use VBT information to determine which DDC bus to use for CRTDCC. Fall back to GPIOA if VBT info is not available. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)
2009-08-30drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU.Eric Anholt
The lack of a proper LRU was partially worked around by taking the fence from the object containing the oldest seqno. But if there are multiple objects inactive, then they don't have seqnos and the first fence reg among them would be chosen. If you were trying to copy data between two mappings, this could result in each page fault stealing the fence from the other argument, and your application hanging. https://bugs.freedesktop.org/show_bug.cgi?id=23566 https://bugs.freedesktop.org/show_bug.cgi?id=23220 https://bugs.freedesktop.org/show_bug.cgi?id=23253 https://bugs.freedesktop.org/show_bug.cgi?id=23366 Cc: Stable Team <stable@kernel.org> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2009-08-28ACPI: don't free non-existent backlight in acpi video moduleKeith Packard
acpi_video_put_one_device was attempting to remove sysfs entries and unregister a backlight device without first checking that said backlight device structure had been created. Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28toshiba_acpi: return on a fail pathJiri Slaby
Return from bt_rfkill_poll() when hci_get_radio_state() fails. value is invalid in that case and should not be assigned to the rfkill state. This also fixes a double unlock bug. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28ACPICA: Windows compatibility fix: same buffer/string storeLin Ming
Fix a compatibility issue when the same buffer or string is stored to itself. This has been seen in the field. Previously, ACPICA would zero out the buffer/string. Now, the operation is treated as a NOP. http://bugzilla.acpica.org/show_bug.cgi?id=803 Reported-by: Rezwanul Kabir <Rezwanul_Kabir@Dell.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-27xenfb: connect to backend before registering fbJeremy Fitzhardinge
As soon as the framebuffer is registered, our methods may be called by the kernel. This leads to a crash as xenfb_refresh() gets called before we have the irq. Connect to the backend before registering our framebuffer with the kernel. [ Fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=14059 ] Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: virtio: net refill on out-of-memory smc91x: fix compilation on SMP
2009-08-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k,m68knommu: Wire up rt_tgsigqueueinfo and perf_counter_open m68k: Fix redefinition of pgprot_noncached arch/m68k/include/asm/motorola_pgalloc.h: fix kunmap arg m68k: cnt reaches -1, not 0 m68k: count can reach 51, not 50
2009-08-27leds: after setting inverted attribute, we must update the LEDThadeu Lima de Souza Cascardo
If we change the inverted attribute to another value, the LED will not be inverted until we change the GPIO state. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Samuel R. C. Vale <srcvale@holoscopio.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27leds: fix multiple requests and releases of IRQ for GPIO LED TriggerThadeu Lima de Souza Cascardo
When setting the same GPIO number, multiple IRQ shared requests will be done without freing the previous request. It will also try to free a failed request or an already freed IRQ if 0 was written to the gpio file. All these oops and leaks were fixed with the following solution: keep the previous allocated GPIO (if any) still allocated in case the new request fails. The alternative solution would desallocate the previous allocated GPIO and set gpio as 0. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Samuel R. C. Vale <srcvale@holoscopio.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27acpi processor: remove superfluous warning messageFrans Pop
This failure is very common on many platforms. Handling it in the ACPI processor driver is enough, and we don't need a warning message unless CONFIG_ACPI_DEBUG is set. Based on a patch from Zhang Rui. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389 Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27ACPI processor: force throttling state when BIOS returns incorrect valueFrans Pop
If the BIOS reports an invalid throttling state (which seems to be fairly common after system boot), a reset is done to state T0. Because of a check in acpi_processor_get_throttling_ptc(), the reset never actually gets executed, which results in the error reoccurring on every access of for example /proc/acpi/processor/CPU0/throttling. Add a 'force' option to acpi_processor_set_throttling() to ensure the reset really takes effect. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389 This patch, together with the next one, fixes a regression introduced in 2.6.30, listed on the regression list. They have been available for 2.5 months now in bugzilla, but have not been picked up, despite various reminders and without any reason given. Google shows that numerous people are hitting this issue. The issue is in itself relatively minor, but the bug in the code is clear. The patches have been in all my kernels and today testing has shown that throttling works correctly with the patches applied when the system overheats (http://bugzilla.kernel.org/show_bug.cgi?id=13918#c14). Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27wmi: fix kernel panic when stack protection enabled.Costantino Leandro
Summary: Kernel panic arise when stack protection is enabled, since strncat will add a null terminating byte '\0'; So in functions like this one (wmi_query_block): char wc[4]="WC"; .... strncat(method, block->object_id, 2); ... the length of wc should be n+1 (wc[5]) or stack protection fault will arise. This is not noticeable when stack protection is disabled,but , isn't good either. Config used: [CONFIG_CC_STACKPROTECTOR_ALL=y, CONFIG_CC_STACKPROTECTOR=y] Panic Trace ------------ .... stack-protector: kernel stack corrupted in : fa7b182c 2.6.30-rc8-obelisco-generic call_trace: [<c04a6c40>] ? panic+0x45/0xd9 [<c012925d>] ? __stack_chk_fail+0x1c/0x40 [<fa7b182c>] ? wmi_query_block+0x15a/0x162 [wmi] [<fa7b182c>] ? wmi_query_block+0x15a/0x162 [wmi] [<fa7e7000>] ? acer_wmi_init+0x00/0x61a [acer_wmi] [<fa7e7135>] ? acer_wmi_init+0x135/0x61a [acer_wmi] [<c0101159>] ? do_one_initcall+0x50+0x126 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13514 Signed-off-by: Costantino Leandro <lcostantino@gmail.com> Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Len Brown <len.brown@intel.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27acpi: don't call acpi_processor_init if acpi is disabledYinghai Lu
Jens reported early_ioremap messages with old ASUS board... > [ 1.507461] pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling > [ 1.532778] early_ioremap(3fffd080, 0000005c) [0] => Pid: 1, comm: swapper Not tainted 2.6.31-rc4 #36 > [ 1.561007] Call Trace: > [ 1.568638] [<c136e48b>] ? printk+0x18/0x1d > [ 1.581734] [<c15513ff>] __early_ioremap+0x74/0x1e9 > [ 1.596898] [<c15515aa>] early_ioremap+0x1a/0x1c > [ 1.611270] [<c154a187>] __acpi_map_table+0x18/0x1a > [ 1.626451] [<c135a7f8>] acpi_os_map_memory+0x1d/0x25 > [ 1.642129] [<c119459c>] acpi_tb_verify_table+0x20/0x49 > [ 1.658321] [<c1193e50>] acpi_get_table_with_size+0x53/0xa1 > [ 1.675553] [<c1193eae>] acpi_get_table+0x10/0x15 > [ 1.690192] [<c155cc19>] acpi_processor_init+0x23/0xab > [ 1.706126] [<c1001043>] do_one_initcall+0x33/0x180 > [ 1.721279] [<c155cbf6>] ? acpi_processor_init+0x0/0xab > [ 1.737479] [<c106893a>] ? register_irq_proc+0xaa/0xc0 > [ 1.753411] [<c10689b7>] ? init_irq_proc+0x67/0x80 > [ 1.768316] [<c15405e7>] kernel_init+0x120/0x176 > [ 1.782678] [<c15404c7>] ? kernel_init+0x0/0x176 > [ 1.797062] [<c10038b7>] kernel_thread_helper+0x7/0x10 > [ 1.812984] 00000080 + ffe00000 that is rather later. acpi_gbl_permanent_mmap should be set in acpi_early_init() if acpi is not disabled and we have > [ 0.000000] ASUS P2B-DS detected: force use of acpi=ht just don't load acpi_processor_init... Reported-and-tested-by: Jens Rosenboom <jens@leia.mcbone.net> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27thermal_sys: check get_temp return valueMichael Brunner
The return value of the get_temp function is not checked when doing a thermal zone update. This may lead to a critical shutdown if get_temp fails and the content of the temp variable is incorrectly set higher than the critical trip point. This has been observed on a system with incorrect ACPI implementation where the corresponding methods were not serialized and therefore sometimes triggered ACPI errors (AE_ALREADY_EXISTS). The following critical shutdowns indicated a temperature of 2097 C, which was obviously wrong. The patch adds a return value check that jumps over all trip point evaluations printing a warning if get_temp fails. The trip points are evaluated again on the next polling interval with successful get_temp execution. Signed-off-by: Michael Brunner <mibru@gmx.de> Acked-by: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27pps: fix incorrect verdict checkJoonwoo Park
Fix incorrect verdict check and returns error if device_create failed, otherwise driver triggers kernel oops. Signed-off-by: Joonwoo Park<joonwpark81@gmail.com> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-26m68k: count can reach 51, not 50Roel Kluin
With while (count++ < 50) { ... } count can reach 51, not 50, so we shouldn't give an error message on a count of 50. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-08-26virtio: net refill on out-of-memoryRusty Russell
If we run out of memory, use keventd to fill the buffer. There's a report of this happening: "Page allocation failures in guest", Message-ID: <20090713115158.0a4892b0@mjolnir.ossman.eu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26smc91x: fix compilation on SMPAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: irda/sa1100_ir: fix broken netdev_ops conversion irda/au1k_ir: fix broken netdev_ops conversion pkt_sched: Fix bogon in tasklet_hrtimer changes.
2009-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Validate linear D-TLB misses. sparc64: Update defconfig. sparc32: Update defconfig. sparc32: Kill trap table freeing code. sparc: sys32.S incorrect compat-layer splice() system call sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM. sparc64: Sign extend length arg to truncate syscalls when compat. sparc: Fix cleanup crash in bbc_envctrl_cleanup()
2009-08-26irda/sa1100_ir: fix broken netdev_ops conversionAlexander Beregalov
This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect net_device_ops). Do the same for sa1100_ir. Untested. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26irda/au1k_ir: fix broken netdev_ops conversionAlexander Beregalov
This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect net_device_ops). Do the same for au1k_ir. Untested. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-25Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clockevent: Prevent dead lock on clockevents_lock timers: Drop write permission on /proc/timer_list
2009-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] ar7_wdt: fix path to ar7-specific headers
2009-08-25tty: make sure to flush any pending work when halting the ldiscLinus Torvalds
When I rewrote tty ldisc code to use proper reference counts (commits 65b770468e98 and cbe9352fa08f) in order to avoid a race with hangup, the test-program that Eric Biederman used to trigger the original problem seems to have exposed another long-standing bug: the hangup code did the 'tty_ldisc_halt()' to stop any buffer flushing activity, but unlike the other call sites it never actually flushed any pending work. As a result, if you get just the right timing, the pending work may be just about to execute (ie the timer has already triggered and thus cancel_delayed_work() was a no-op), when we then re-initialize the ldisc from under it. That, in turn, results in various random problems, usually seen as a NULL pointer dereference in run_timer_softirq() or a BUG() in worker_thread (but it can be almost anything). Fix it by adding the required 'flush_scheduled_work()' after doing the tty_ldisc_halt() (this also requires us to move the ldisc halt to before taking the ldisc mutex in order to avoid a deadlock with the workqueue executing do_tty_hangup, which requires the mutex). The locking should be cleaned up one day (the requirement to do this outside the ldisc_mutex is very annoying, and weakens the lock), but that's a larger and separate undertaking. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Tested-by: Xiaotian Feng <xtfeng@gmail.com> Tested-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Tested-by: Dave Young <hidave.darkstar@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-25drm/i915: Set crtc/clone mask in different output devicesMa Ling
Based on Bspec each encoder has different sharing pipe property, i.e. Integrated or SDVO TV both will occupy one pipe exclusively, and sdvo-non-tv and crt are allowed to share one. The patch moves sharing judgment into differnet output functions, and sets the right clone bit. This fixes both HDMI outputs choosing the same pipe. https://bugs.freedesktop.org/show_bug.cgi?id=22247 Signed-off-by: Ma Ling <ling.ma@intel.com> Reviewed-by : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24drm/i915: Always use SDVO_B detect bit for SDVO output detection.Ma Ling
After the following commit is shipped, the SDVO C detection will depend on the SDVO_C/DP detion bit. commit 13520b051e8888dd3af9bda639d83e7df76613d1 Author: Kristian Høgsberg <krh@redhat.com> Date: Fri Mar 13 15:42:14 2009 -0400 drm/i915: Read the right SDVO register when detecting SVDO/HDMI. According to the spec we should continue to detect the SDVO_B/C based on the SDVO_B detection bit. The new detection bit on G4X platform is for the HDMI_C detection rather than SDVO_C detection. https://bugs.freedesktop.org/show_bug.cgi?id=20639 Signed-off-by: Ma Ling <ling.ma@intel.com> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder()Roel Kluin
Bit SDVO_OUTPUT_SVID0 was tested twice Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xxBruno Prémont
Commit 0c2e39525b3b53a97a0202c5f35058147e53977e is not sufficient to get fd.o bug #20115 fixed. In addition intel_find_best_PLL() must not only rely on BIOS settings for i9xx chips but also for i8xx, so drop the IS_I9XX() check. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24drm/i915: Set the multiplier for SDVO on G33 platformSean Young
http://bugs.freedesktop.org/show_bug.cgi?id=21417 Signed-off-by: Sean Young <sean@mess.org> Reviewed-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-08-24Merge branch 'fixes' of git://git.marvell.com/orionLinus Torvalds
* 'fixes' of git://git.marvell.com/orion: [ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop [ARM] Kirkwood: enable eSATA on QNAP TS-219P [ARM] Kirkwood: __init requires linux/init.h
2009-08-24Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: Fix radeon_gem_busy_ioctl harder.
2009-08-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ucb1400_ts - enable interrupt unconditionally Input: ucb1400_ts - enable ADC Filter Input: wacom - don't use on-stack memory for report buffers Input: iforce - support new revision of ACT LABS Force RS Input: joydev - decouple axis and button map ioctls from input constants
2009-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: smc91x: let smc91x work well under netpoll pxaficp-ir: remove incorrect net_device_ops NET: llc, zero sockaddr_llc struct drivers/net: fixed drivers that support netpoll use ndo_start_xmit() netpoll: warning for ndo_start_xmit returns with interrupts enabled net: Fix Micrel KSZ8842 Kconfig description netfilter: xt_quota: fix wrong return value (error case) ipv6: Fix commit 63d9950b08184e6531adceb65f64b429909cc101 (ipv6: Make v4-mapped bindings consistent with IPv4) E100: fix interaction with swiotlb on X86. pkt_sched: Convert CBQ to tasklet_hrtimer. pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer rtl8187: always set MSR_LINK_ENEDCA flag with RTL8187B ibm_newemac: emac_close() needs to call netif_carrier_off() net: fix ks8851 build errors net: Rename MAC platform driver for w90p910 platform yellowfin: Fix buffer underrun after dev_alloc_skb() failure orinoco: correct key bounds check in orinoco_hw_get_tkip_iv mac80211: fix todo lock
2009-08-24[ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loopSimon Kagstrom
GCC 4.3.3 and 4.4.1 happily moves the dword load instruction out of the loop in orion_nand_read_buf. This patch makes the instruction volatile to avoid the issue. I've discussed this at gcc-help, refer to the thread at http://gcc.gnu.org/ml/gcc-help/2009-08/msg00187.html The early clobber is added to avoid the destination registers and the source register overlapping. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-08-24smc91x: let smc91x work well under netpollDongdong Deng
The NETPOLL requires that interrupts remain disabled in its callbacks. Using *_irq_save()/irq_restore() to replace *_irq_disable()/irq_enable() functions in NETPOLL's callbacks of smc91x, so that it doesn't enable interrupts when already disabled, and kgdboe/netconsole would work properly over smc91x. Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-24pxaficp-ir: remove incorrect net_device_opsMarek Vasut
This patch fixes broken pxaficp-ir. The problem was in incorrect net_device_ops being specified which prevented the driver from operating. The symptoms were: - failing ifconfig for IrLAN, resulting in SIOCSIFFLAGS: Cannot assign requested address - irattach working for IrCOMM, but the port stayed disabled Moreover this patch corrects missing sysfs device link. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-24drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng
The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of "A functions set" in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use "B functions set" to prevent the irqs from getting enabled while in netpoll_send_skb(). A functions set: local_irq_disable()/local_irq_enable() spin_lock_irq()/spin_unlock_irq() spin_trylock_irq()/spin_unlock_irq() B functions set: local_irq_save()/local_irq_restore() spin_lock_irqsave()/spin_unlock_irqrestore() spin_trylock_irqsave()/spin_unlock_irqrestore() Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-24net: Fix Micrel KSZ8842 Kconfig descriptionAndreas Mohr
Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-14 15:50:05 (GMT)